Search NASA⌕ Search

SEARCH · Search NASA

Results for “Redox Measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Understanding and modeling current and future coastal wetland methane dynamics (Final Report)

The coastal terrestrial-aquatic interface (TAI) is a highly dynamic component of the Earth system that plays a critical role in biogeochemical cycling. Due to its dynamic nature, the processes that regulate decomposition and methane (CH 4 ) emissions are of greater significance at the TAI than in upland systems. Despite this, we have limited mechanistic understanding of how climate stressors interact to regulate the electron acceptors and donors that determine decomposition pathways within TAIs, including the generation of hot spots and hot moments. Accurately modeling these processes is critical for incorporating the coastal TAI into Earth systems models, such as DOE’s E3SM. With previous DOE support, we adapted an aerobic terrestrial representation of decomposition using PFLOTRAN, a reactive flow and transport model, and added anerobic decomposition pathways, salinity, and oxygen (O 2 ) that fluctuates independently of water table level. However, because this model (PFLOTRAN TAI ) is based on decomposition rates and organic matter carbon to nitrogen ratios from terrestrial systems, its performance in TAI systems is currently limited by the lack of empirical data to properly parameterize variables. In addition, while PFLOTRAN TAI can simulate movement of O 2 into sediments, it is not currently capable of tracking the movement of CH 4 gas through plant tissues due to both current model structure and lack of available data. Our overall objective of the project was the increase our mechanistic understanding of CH 4 dynamics in response to environmental change, such that we can improve the representation of these dynamics in PFLOTRAN. We installed automated flux chambers in a new field-scale active soil warming experiment and set up marsh organs (mesocosms) to test effects of warming, flooding, and salinity. This resulted in a new dataset consisting of chamber-level CH 4 flux measurements across multiple sites, ecological conditions, and timeframes, as well as corresponding measurements on porewater chemistry, soil carbon quality, plant biomass, and redox reaction rates. Using these data, we improved PFLOTRAN TAI to more accurately model CH 4 dynamics and successfully tested our hypotheses. This grant contributed to the professional development of 3 postdocs, 4 undergraduate interns, 4 teacher interns, 17 technicians, and 15 participatory scientists. The automated chamber technology designed for this grant has also been shared with multiple new projects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Development of Composite Photocatalyst Materials that are Highly Selective for Solar Hydrogen Production and their Evaluation in Z-Scheme Reactor Designs

The key technology gap preventing a vertically stacked dual-bed particle suspension reactor from achieving the DOE MYRD&D ultimate cost target for H 2 production remains the lack of materials in particle form factor that exhibit ≥10% solar-to-H 2 energy conversion (STH) efficiency as a suspension. Therefore, our project goals centered around strategies to increase the STH efficiency by enhancing photophysical properties of perovskite oxide particles including increased visible-light absorption, increased selectivity for electrocatalysis of the H 2 evolution reaction (HER) and the O 2 evolution reaction (OER) through development of ultrathin oxide coatings, correlating composition and structure to function, and improving understanding of multiscale transport and kinetic processes.

08 HYDROGEN↗
DOE OSTI2021

Temporal, Spatial, and Temperature Controls on Organic Carbon Mineralization and Methanogenesis in Arctic High-Centered Polygon Soils

Warming temperatures in continuous permafrost zones of the Arctic will alter both hydrological and geochemical soil conditions, which are strongly linked with heterotrophic microbial carbon (C) cycling. Heterogeneous permafrost landscapes are often dominated by polygonal features formed by expanding ice wedges: water accumulates in low centered polygons (LCPs), and water drains outward to surrounding troughs in high centered polygons (HCPs). These geospatial differences in hydrology cause gradients in biogeochemistry, soil C storage potential, and thermal properties. Presently, data quantifying carbon dioxide (CO 2 ) and methane (CH 4 ) release from HCP soils are needed to support modeling and evaluation of warming-induced CO 2 and CH 4 fluxes from tundra soils. This study quantifies the distribution of microbial CO 2 and CH 4 release in HCPs over a range of temperatures and draws comparisons to previous LCP studies. Arctic tundra soils were initially characterized for geochemical and hydraulic properties. Laboratory incubations at −2, +4, and +8°C were used to quantify temporal trends in CO 2 and CH 4 production from homogenized active layer organic and mineral soils in HCP centers and troughs, and methanogen abundance was estimated from mcrA gene measurements. Results showed that soil water availability, organic C, and redox conditions influence temporal dynamics and magnitude of gas production from HCP active layer soils during warming. At early incubation times (2–9 days), higher CO 2 emissions were observed from HCP trough soils than from HCP center soils, but increased CO 2 production occurred in center soils at later times (>20 days). HCP center soils did not support methanogenesis, but CH 4 -producing trough soils did indicate methanogen presence. Consistent with previous LCP studies, HCP organic soils showed increased CO 2 and CH 4 production with elevated water content, but HCP trough mineral soils produced more CH 4 than LCP mineral soils. HCP mineral soils also released substantial CO 2 but did not show a strong trend in CO 2 and CH 4 release with water content. Knowledge of temporal and spatial variability in microbial C mineralization rates of Arctic soils in response to warming are key to constraining uncertainties in predictive climate models.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

A Free-Standing Boron-Doped Diamond Grid Electrode for Fundamental Spectroelectrochemistry

Spectroelectrochemistry (SEC) is a powerful technique that enables a variety of redox properties to be studied, including formal potential (E o ), thermodynamic values (ΔG, ΔH, ΔS), diffusion coefficient (D), electron transfer stoichiometry (n), and others. SEC requires an electrode which light can pass through while maintaining sufficient electrical conductivity. This has been traditionally composed of metal or metal oxide films atop transparent substrates like glass, quartz, or metallic mesh. Robust electrode materials like boron-doped diamond (BDD) could help expand the environments in which SEC can be performed, but most designs are limited to thin films (~100–200 nm) on transparent substrates less resilient than free-standing BDD. Here, this work presents a free-standing BDD grid electrode (G-BDD) for fundamental SEC measurements, using the well-characterized Fe(CN) 6 3–/4– redox couple as proof-of-concept. With a combination of cyclic voltammetry (CV), thin-layer SEC, and chronoabsorptometry, several of the redox properties mentioned above were calculated and compared. For E o' , n, and D, similar results were obtained when comparing the CV [E o' = +0.279 (±0.002) V vs Ag/AgCl; n = 0.97; D = 4.1 × 10 –6 cm 2 ·s –1 ] and SEC [E o' = +0.278 (±0.001) V vs Ag/AgCl; n = 0.91; D = 5.2 × 10 –6 cm 2 ·s –1 ] techniques. Both values align with what has been previously reported. To calculate D from the SEC data, modification of the classical equation used in chronoabsorptometry was required to accommodate the G-BDD electrode geometry. Overall, this work expands on the applicability of SEC techniques and BDD as a versatile electrode material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Proton, Electron, and Hydrogen-Atom Transfer Thermodynamics of the Metal–Organic Framework, Ti-MIL-125, Are Intrinsically Correlated to the Structural Disorder

Interfacial charge transfer reactions involving protons and/or electrons are fundamental to heterogeneous catalysis and many other reactions relevant to energy, chemical, and biological sectors. Metal–organic frameworks (MOFs) with redox-active metal-oxo nodes have emerged as candidate materials to examine these reactions with near-atomic-level precision, given their crystalline nature. Here, we employed a colloidally stable, Ti-based MOF, Ti-MIL-125, with different crystal sizes to examine catalytically relevant charge transfer thermodynamics. The Ti 8 (μ 2 -O) 8 (μ 2 -OH) 4 nodes structurally mimic TiO 2 , which has shown some PCET reactivity toward reactions of H 2 , O 2 , and others. In this report, we have demonstrated that a change in crystal size induces different amounts of structural disorder to the Ti-oxo node, further changing the thermodynamics of proton/electron/hydrogen-atom transfer reactions. Using electrochemical open-circuit potential (E OCP ) measurements, we have determined that all crystallites undergo a 1H + /1e – redox reaction, which, given the stoichiometry, can be considered as a net H atom transfer (HAT) reaction. The thermodynamics of this HAT reaction, the Ti 3+ O–H bond dissociation free energy (BDFE), was dependent on the crystal size of the MOF, as the decrease in crystal size induced more structural disorder. Our computational calculations have indicated that this difference in BDFE is due to a local change in the geometry of Ti cations, rather than the commonly invoked defects, such as the “missing-linker” defect sites. Individual proton/electron transfer (PT/ET) thermodynamics were also highly dependent on the crystal sizes. These were probed using pK a or band gaps (E g ), respectively. These findings suggest that, particularly when MOFs are nanosized with a large amount of structural disorder, they should no longer be considered “true” single-site catalysts; this is an implicit, but widespread assumption within the MOF-based catalysis field. Implications of these findings will be contrasted with structurally similar metal oxides like TiO 2 and other redox-active MOFs.

Bond dissociation free energy↗
DOE OSTI2023

High-Throughput Electrochemical Characterization of Aqueous Organic Redox Flow Battery Active Material

The development of redox-active organics for flow batteries providing long discharge duration energy storage requires an accurate understanding of molecular lifetimes. Herein we report the development of a high-throughput setup for the cycling of redox flow batteries. Using common negolyte redox-active aqueous organics, we benchmark capacity fade rates and compare variations in measured cycling behavior of nominally identical volumetrically unbalanced compositionally symmetric cells. We propose figures of merit for consideration when cycling sets of identical cells, and compare three common electrochemical cycling protocols typically used in battery cycling: constant current, constant current followed by constant voltage, and constant voltage. Redox-active organics exhibiting either high or low capacity fade rates are employed in the cell cycling protocol comparison, with results analyzed from over 50 flow cells.

Electrochemistry↗
DOE OSTI2026

Direct Measurement of Cl − Activity in Metal Chloride Molten Salts using a Cl 2 /Cl − Electrode

Molten metal chloride salts are promising candidates for advanced heat transfer fluids in generation IV nuclear reactors and beyond. The activity of the chloride ion in the salt has a large influence on the redox characteristics of the corresponding molten salt. There exists a knowledge gap for the direct measurement of chlorobasicity (Lewis basicity) in molten-salt mixtures. Here, the focus of this work was to develop a Cl 2 /Cl − electrode for the direct measurement of chloride activity in molten metal-chloride salt mixtures. The LiCl–KCl eutectic system was utilized as the reference melt to determine the change in chloride ion activity as increasing concentrations of MgCl 2 are added to the LiCl–KCl eutectic working electrode. The results of the measurements indicated a reduction in chloride ion activity as the concentration of magnesium chloride increased, consistent with the complexation of free chlorides by Lewis acidic magnesium cationic species. The Temkin model was used to estimate the thermodynamic properties of MgCl 4 2− complex.

Chloride↗
DOE OSTI2021

Iron-iminopyridine complexes as charge carriers for non-aqueous redox flow battery applications

Non-aqueous redox flow batteries (RFBs) have been gaining increased attention in the energy storage arena. Some of their attractive features include the promise for high energy densities, wider voltage windows compared to aqueous systems, as well as wider operating temperature ranges. One of the major challenges in the development of these systems is the lack of electroactive materials that can undergo reversible redox events within the larger potential window of organic solvents. In this paper, we present the design, synthesis, and measurement of electrochemical properties of some iron-based imine- and iminopyridine complexes as promising candidates for RFB applications. Synthesized complexes afforded three reversible redox couples over a ~3 V range. The redox events were also computationally explored and are in good agreement with experimental data. Theoretical calculations show that the redox event at the positive potential can be characterized as metal-centered event corresponding to Fe 3+ → Fe 2+ reduction, while the two redox events at negative potentials are associated with the consecutive reductions of iminopyridine or diimine moieties. This work has led to the identification of a promising anolyte material, [tris(imino)pyridine)Fe][OTf] 2 (1), which is soluble in acetonitrile and is synthesized in two simple steps. This species shows outstanding performance when cycled between 1.0 V and 2.35 V, with 93% coulombic efficiency, 84% energy efficiency, and a capacity decay rate of 0.61% per cycle at 5 mA cm –2 . Further modifications to this kind of charge carrier may lead to the development of high energy density materials for grid scale energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2026

Coordination-Induced Weakening of N–H Bonds Driven by Bimetallic Cooperativity in Zr/Co Compounds

The bond dissociation free energy (BDFE) of the element-hydrogen bonds of protic substrates have been found to decrease upon metal coordination. Herein, an early/late heterobimetallic complex is used to examine the impact on the BDFE N−H when the substrate binding site and the redox-active site are two different metals that are spatially separated. A tris- (phosphinoamide) framework is used to link a d 0 ZrIV center with an accessible substrate binding site to a coordinatively saturated redox-active Co center, which serves as an appended electron reservoir. A series of aniline, amido, and imido Zr/Co model compounds were synthesized starting from the Zr IV /Co −I aniline adduct PhH 2 N−Zr(MesNP i Pr 2 ) 3 CoCN t Bu (2). 2,4,6-tristert- butylphenoxyl radical ( t Bu 3 ArO • ) was used to abstract one or two H atoms and produce the amido and imido complexes PhHNZr( MesNP i Pr 2 ) 3 CoCN t Bu (3) and PhN≡Zr(MesNP i Pr 2 ) 3 CoCNtBu (4), respectively. Using open-circuit potential measurements, the BDFE N−H within 2 and 3 were determined to be 37 kcal/mol (2) and 55 kcal/mol (3). Cyclic voltammetry measurements were conducted to determine the Co I/0 and Co 0/−I redox potentials. The pK a s were then estimated using the Bordwell equation to provide further insight into the thermochemical aspects of the observed proton coupled electron transfer (PCET) reactions.

Bond dissociation free energy↗
DOE OSTI2022

Improving Ni-Based SOFC Anode Resilience and Durability through Secondary Phase Formation

The project used a multi-disciplinary approach to test test if 2° materials, added to traditional cermet components, enhanced SOFC mechanical strength, anode resilience and durability when subjected to electrochemical and environmental redox cycling. Findings from fracture testing, electrochemical studies and operando Raman spectroscopy measurements demonstrated that aluminum titanate (Al 2 TiO 5 or ALT) mechanically mixed with NiO-YSZ cermets confers superior mechanical strength and slower degradation rates under polarization. No deleterious effects from ALT in conversion efficiency were observed. Specific accomplishments included the following: (1) Refined methods used to fabricate ALT enhanced anodes into bi-layer anode supports to achieve high power densities; (2) Compared the effects of adding ALT mechanically to Ni-YSZ powders prior to anode fabrication with adding ALT through infiltration and co-infiltration of YSZ scaffolds; (3) Tested the resilience of these novel materials to electrochemical and environmental redox cycling and thermal stresses commonly encountered in functioning SOFCs; and (4) Characterized the ability of ALT to improve the carbon tolerance of Ni-YSZ anodes operating with dry methane.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1976

A system using solid ceramic oxygen electrolyte cells to measure oxygen fugacities in gas-mixing systems

Details are given for the construction and operation of a 101.3 kN/sq m (1 atmosphere) redox control system. A solid ceramic oxygen electrolyte cell is used to monitor the oxygen fugacity in the furnace. The system consists of a vertical quench, gas mixing furnace with heads designed for mounting the electrolyte cell and with facilities for inserting and removing the samples. The system also contains the high input impedance electronics necessary for measurements, a simplified version of a gas mixing apparatus, and devices for experiments under controlled rates of change relative to temperature and redox state. The calibration and maintenance of the system are discussed.

Williams, R. J.↗
DOE OSTI2021

Influence of Surface and Structural Variations in Donor–Acceptor–Donor Sensitizers on Photoelectrocatalytic Water Splitting

Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D–A–D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5′-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore–catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the −COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4′-((HO) 2 OPCH 2 )2-2,2′-bipyridine)(OH 2 )] 2 , RuCt 2+ , or proton reduction catalyst [Ni(P 2 Ph N 2 C 6 H 4 CH 2 PO 3 H 2 ) 2 ] 2+ , NiCt 2+ , on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO 2 |TiO 2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore–catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore–catalyst assemblies.

Chromophores↗
DOE OSTI2026

Online and Offline Analytical Techniques to Quantify Chloride Salts

This report serves as the deliverable for Milestone- M3FT-26AN080502017: Summary of Accomplishments for Online and Offline Analytical Qualification of Chloride Fuel Salts. The qualification of chloride fuel salts is a critical challenge for the development and deployment of molten salt reactors (MSRs), requiring precise control and verification of chemical and isotopic composition to ensure predictable neutronics, manageable radiological behavior, and safe plant operation. Currently, there is no universally accepted standard for fuel salt qualification, particularly for chloride-based systems, which underscores the need for robust, science-based analytical methodologies. This report presents a comprehensive evaluation of both online and offline techniques for quantifying chloride fuel salts, including multielectrode array voltammetry, differential thermal analysis (DTA) probes, inert gas fusion (IGF) analyzers, and gamma spectrometry using the Mirion NAIS-2x2 NaI(Tl) detector. The integration of these methods enables real-time monitoring of actinide concentrations, redox state, and thermophysical properties, as well as high-precision measurement of impurities and isotopic composition. The acquisition of advanced instruments such as the Bruker Leonardo G6 for IGF and the Mirion NaI detector enhances analytical capabilities, supporting the establishment of operational envelopes and impurity thresholds. These approaches provide essential data for neutronic impact evaluation, feedstock documentation, and compliance with nuclear safety standards. The methodologies developed and validated in this report lay the groundwork for future standardized protocols, bridging the gap between laboratory research and commercial reactor operation, and advancing the safe and efficient deployment of chloride-fueled MSRs.

Polke, Amber↗
NASA NTRS2019

Simulated Microgravity Affects Behavior and Cytokine Expression in the Hippocampus of Adult Mice: Influence of Mitochondrial Reactive Oxygen Species

The effects of microgravity, and social isolation on the CNS are poorly understood. We hypothesize that mitochondrial reactive oxygen species (ROS) play an important role in this process. Since mice are social animals, our lab developed a novel social model of hindlimb unloading (HU), enabling us to determine the effects of both social isolation and simulated microgravity. Responses to 30d of HU were compared in wildtype or transgenic MCAT mice who over-express human catalase in mitochondria. Abundance of 4-Hydroxynonenal, Park7 (a redox-sensitive chaperone and sensor of oxidative stress) and corticosterone were measured by ELISA. Cytokines related to inflammation in the hippocampus and in plasma were analyzed by a protein array. Behavioral data was collected over a 24-hour period.Socially housed HU mice were more active and conducted at least two times more exploratory activities, compared to normally loaded mice. Correlation analysis revealed that specific brain and plasma cytokines correspond with specific behaviors. Simulated microgravity and/or social isolation caused changes in cytokine patterns in the hippocampus and in plasma, with significant interaction effects of HU and genotype in expression levels of five cytokines (out of 35). Interestingly, elevation of these generally pro-inflammatory cytokines by HU in WT mice was mitigated in MCAT mice, suggesting a role for mitochondrial ROS signaling in inflammatory CNS responses to microgravity. Interestingly, socially housed mice had also lower level of 4HNE and higher level of Park7 in the hippocampus compared to singly housed animals. The cytokine responses to social isolation were more extensive in brain vs plasma. Further, there was no overlap in the cytokine repertoire regulated in response to microgravity versus, isolation suggesting divergent mechanisms or downstream signaling. These findings implicate a potentially important role for mitochondrial ROS in CNS responses to the challenges posed both by prolonged missions in space and bedrest on Earth

Guttmann, Linda↗
NASA NTRSDate not supplied

Improving Data Analyses for a Biological Mission to Deep Interplanetary Space

Onboard the Artemis 1 rocket, NASA plans to launch the first deep space bioscience mission past low Earth orbit (LEO) since 1972, BioSentinel, a 6-Unit (6U) biological CubeSat. BioSentinel’s goals are to assess the effect of deep space ionizing radiation (IR) on DNA and cell damage response, using Saccharomyces cerevisiae, or budding yeast, as a model organism. BioSentinel accomplishes this by measuring Optical Density (OD) in addition to metabolic activity using the redox dye alamarBlue, both of which will be read through light emitting diode (LED) lights of differing wavelengths. With the largest and most sophisticated energy-providing solar panels utilized on a biological CubeSat to date, BioSentinel will be equipped with an IR dosimeter to identify what doses of radiation the yeast is exposed to at any point in time, in addition to a transponder to send such data back to NASA Ames’ Multi Mission Operations Center (MMOC). Biology computational programs and data processing scripts are necessary to analyze this complex data once it is received, including automated subroutines to analyze duplication rate, alamarBlue reduction, and time periods when paired against numerous other variables. Overall, we have implemented several VisualBasic biocomputational programs to analyze such data in an organized and efficient manner so that conclusions can be made rapidly. Furthermore, we showcase why efficient analysis of particular parameters is important to better understand the risks that deep space IR poses to astronauts, especially when considering the upcoming Artemis missions.

Bijan Harandi↗
NASA NTRSDate not supplied

Investigating Biological Responses to Space-like Radiation using the yeast Saccharomyces cerevisiae

As we plan crewed missions to the Moon, Mars, and beyond, it is essential to understand how persistent exposure to space radiation affects biology. Unlike on the International Space Station, where crew support and sample return are possible, experiments for long-duration missions require autonomous systems with no sample return. Human cells would be ideal biosensors, but limitations in culture methods, extended prelaunch storage, and long flight durations make it very difficult to keep human cells alive. Unlike other model systems, yeast can survive the constraints of long-duration spaceflight. Despite a billion years of evolution separating yeast from humans, we share homology in hundreds of genes important for basic cell function, including responses to DNA damage. Thus, yeast are excellent biosensors for detecting types/extent of damage induced by space radiation. BioSentinel is NASA’s latest biological CubeSat, and first interplanetary space bioscience mission. BioSentinel is manifested on Artemis 1, the first test flight of NASA’s Space Launch System, in the coming year. The BioSensor payload within BioSentinel contains two yeast strains. The wild type serves as a control for health and “normal” DNA damage repair (DDR). The rad51 deletion mutant is defective for DDR and will undergo alterations to growth and metabolism as it accumulates radiation damage. Changes in growth and metabolic activity will be measured using a 3-color LED detection system and the metabolic redox dye alamarBlue®. Preliminary tests indicate a significant change in alamarBlue response to space-like, low-dose ionizing radiation. We will discuss these findings in four parts – Introduction to biological CubeSats and the BioSentinel mission (presented by Sergio Santa Maria), preliminary responses to space-like ionizing radiation (presented here), a deeper dive into tracking metabolic changes after exposure to ionizing radiation (presented by Diana Gentry), and a look into methods for correcting flight optical data (presented by Abbey Kim). This work is funded by NASA’s Advanced Exploration Systems.

CubeSat↗
NASA NTRSDate not supplied

Investigating Molecular Responses to Space Radiation for Biological Missions Beyond Low Earth Orbit

As we plan crewed missions to the Moon, Mars, and beyond, it is essential to understand how persistent exposure to deep space radiation affects biology. Unlike on the International Space Station (ISS), where crew support and sample return are possible, experiments for long-duration missions require autonomous systems with no sample return. Human cells would be ideal biosensors, but limitations in culture methods, extended prelaunch storage, and long flight durations make it difficult to keep human cells alive. Unlike other model systems, yeast can survive the constraints of long-duration spaceflight. Despite a billion years of evolution separating yeast from humans, we share homology in hundreds of genes important for basic cell function, including responses to DNA damage. Thus, yeast are excellent biosensors for detecting types/extent of damage induced by space radiation. BioSentinel is NASA’s latest biological CubeSat, and first interplanetary space bioscience mission. BioSentinel is launching on Artemis 1, the first flight of NASA’s Space Launch System, in 2022. The BioSensor payload within BioSentinel contains two yeast strains. The wild type serves as a control for health and normal DNA damage repair (DDR). The rad51 deletion mutant is defective for DDR and will undergo alterations to growth and metabolism as it accumulates radiation damage. Changes in growth and metabolic activity will be measured using a 3-color LED detection system and the metabolic redox dye alamarBlue®. Preliminary tests indicate a significant change in alamarBlue responses to space-like, low-dose ionizing radiation. We will discuss these findings in five parts – Introduction to NASA’s biological CubeSats and BioSentinel (presented by Sergio Santa Maria), analysis of flight data from the ISS mission (presented by Kylie Akiyama), preliminary molecular responses to space radiation (presented here), a deeper dive into those pathways (presented by Kyra Keenan), and characterizing stress response through redox potential data (presented by Diana Gentry).

Lauren Courtney Liddell↗
DOE OSTI2021

Optical and electrochemical effects of H 2 and O 2 bubbles at upward-facing Si photoelectrodes

The effects of the size, contact-angle, and coverage of gas bubbles on solar fuels devices were characterized at cm-scale, upward-facing planar and microwire-array Si photoelectrodes in stagnant electrolytes. Experimental measurements were supported by ray-tracing simulations of surface attached gas bubble films. A dilute, redox-active tracer allowed for the quantification of the mass-transport effects of bubble coverage during photoanodic O 2 (g) evolution at upward-facing photoanodes in 1.0 M KOH(aq.). Measurements of the gas coverage at upward-facing p-Si photocathodes in 0.50 M H 2 SO 4 (aq.) allowed for the nucleation rate and contact angle of H 2 (g) bubbles to be evaluated for systems having various surface free energies. Under simulated solar illumination, the rapid departure of small O 2 (g) bubbles produced stable photocurrents at upward-facing oxygen-evolving Si photoanodes and yielded increased mass-transport velocities relative to a stagnant electrolyte, indicating that bubbles can provide a net benefit to the photoelectrochemical performance of an upward-facing photoanode in solar fuels devices.

14 SOLAR ENERGY↗