Search NASA⌕ Search

SEARCH · Search NASA

Results for “SCALE EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Reynolds Number Effects on a Supersonic Transport at Subsonic High-Lift Conditions (Invited)

A High Speed Civil Transport configuration was tested in the National Transonic Facility at the NASA Langley Research Center as part of NASA's High Speed Research Program. The primary purposes of the tests were to assess Reynolds number scale effects and high Reynolds number aerodynamic characteristics of a realistic, second generation supersonic transport while providing data for the assessment of computational methods. The tests included longitudinal and lateral/directional studies at transonic and low-speed, high-lift conditions across a range of Reynolds numbers from that available in conventional wind tunnels to near flight conditions. Results are presented which focus on Reynolds number and static aeroelastic sensitivities of longitudinal characteristics at Mach 0.30 for a configuration without an empennage. A fundamental change in flow-state occurred between Reynolds numbers of 30 to 40 million, which is characterized by significantly earlier inboard leading-edge separation at the high Reynolds numbers. Force and moment levels change but Reynolds number trends are consistent between the two states.

Owens, L.R.↗
NASA NTRS1973

Design and fabrication of an augmentor wing model for acoustic tests

The design and fabrication of a full-scale section of an augmentor wing to be used for acoustic testing at the Lewis Research Center are discussed. This hardware will be used primarily to investigate scaling effects of acoustic data obtained during the Boeing-run model tests. Typical model test data is shown in the report, together with predictions on both performance and acoustics that can be expected from the full-scale section to be built. Areas covered include: the aerodynamic and acoustic criteria of the flap system and nozzles, detailed discussion of the hardware, test system operation procedure, and stress analysis of the entire test system.

Jackson, J.↗
NASA NTRS1989

Risk-Based Fire Safety Experiment Definition for Manned Spacecraft

Risk methodology is used to define experiments to be conducted in space which will help to construct and test the models required for accident sequence identification. The development of accident scenarios is based on the realization that whether damage occurs depends on the time competition of two processes: the ignition and creation of an adverse environment, and the detection and suppression activities. If the fire grows and causes damage faster than it is detected and suppressed, then an accident occurred. The proposed integrated experiments will provide information on individual models that apply to each of the above processes, as well as previously unidentified interactions and processes, if any. Initially, models that are used in terrestrial fire risk assessments are considered. These include heat and smoke release models, detection and suppression models, as well as damage models. In cases where the absence of gravity substantially invalidates a model, alternate models will be developed. Models that depend on buoyancy effects, such as the multizone compartment fire models, are included in these cases. The experiments will be performed in a variety of geometries simulating habitable areas, racks, and other spaces. These simulations will necessitate theoretical studies of scaling effects. Sensitivity studies will also be carried out including the effects of varying oxygen concentrations, pressures, fuel orientation and geometry, and air flow rates. The experimental apparatus described herein includes three major modules: the combustion, the fluids, and the command and power modules.

Apostolakis, G. E.↗
NASA NTRS1989

Automatic control of cryogenic wind tunnels

Inadequate Reynolds number similarity in testing of scaled models affects the quality of aerodynamic data from wind tunnels. This is due to scale effects of boundary-layer shock wave interaction which is likely to be severe at transonic speeds. The idea of operation of wind tunnels using test gas cooled to cryogenic temperatures has yielded a quantrum jump in the ability to realize full scale Reynolds number flow similarity in small transonic tunnels. In such tunnels, the basic flow control problem consists of obtaining and maintaining the desired test section flow parameters. Mach number, Reynolds number, and dynamic pressure are the three flow parameters that are usually required to be kept constant during the period of model aerodynamic data acquisition. The series of activity involved in modeling, control law development, mechanization of the control laws on a microcomputer, and the performance of a globally stable automatic control system for the 0.3-m Transonic Cryogenic Tunnel (TCT) are discussed. A lumped multi-variable nonlinear dynamic model of the cryogenic tunnel, generation of a set of linear control laws for small perturbation, and nonlinear control strategy for large set point changes including tunnel trajectory control are described. The details of mechanization of the control laws on a 16 bit microcomputer system, the software features, operator interface, the display and safety are discussed. The controller is shown to provide globally stable and reliable temperature control to + or - 0.2 K, pressure to + or - 0.07 psi and Mach number to + or - 0.002 of the set point value. This performance is obtained both during large set point commands as for a tunnel cooldown, and during aerodynamic data acquisition with intrusive activity like geometrical changes in the test section such as angle of attack changes, drag rake movements, wall adaptation and sidewall boundary-layer removal. Feasibility of the use of an automatic Reynolds number control mode with fixed Mach number control is demonstrated.

Balakrishna, S.↗
NASA NTRS2006

Journal of Gravitational Physiology, Volume 13, No. 1

At the outset, the Journal published one issue in 1994. The first number comprised the Proceedings of the 15th Annual International Gravitational Physiology Meeting, held in Barcelona, Spain in October 1993. The Proceedings of the previous 14 Annual Meetings appeared as supplements to The Physiologist from 1979 to 1993. Each year, one issue of the Journal is devoted to the Annual Meeting Proceedings, and up to four more issues are comprised of full-length research papers. Additionally, Supplement Issues are considered by the Editorial Board as they are submitted. The Journal is published for the International Society for Gravitational Physiology by the Galileo Foundation, a 501(c)(3) nonprofit public benefit corporation. This issue, the first number of 2006, comprises the Proceedings of the joint meeting of the International Society for Gravitational Physiology s 27th Annual International Gravitational Physiology Meeting, held in Osaka, Japan 23- 28 April, 2006. The Journal of Gravitational Physiology invites the submission of original experimental or observational papers on subjects in the field of gravitational physiology. Review articles, theoretical papers and historical or biographical articles will also be solicited by the Editor for publication. The wide scientific span of the Journal rests on physiology as its keystone. Gravitational physiology is considered to include the effects of changes in the magnitude and directions of the gravitational force environment on cells and physiological systems and behavior of humans, animals and plants. The effects of weightlessness during space flight, high sustained G forces and chronic acceleration, vibration, impact and the various forms of simulated weightlessness are also included, as well as is consideration of the evolutionary consequences of gravity and the role of gravity in the manifestation of scale effects in animals and plants.

Fuller, Charles A.↗
NASA NTRS2020

The Role of the SO2 Radiative Effect in Sustaining the Volcanic Winter and Soothing the Toba Impact on Climate

Volcanic eruptions are an important climate driver. The impact of Pinatubo-sized eruptions has been observed and is well constrained. The magnitude and duration of volcanic winter effects after super-eruptions such as Toba remain disputed due to disagreement between the strong cooling predicted by models, and much milder climate perturbations according to the paleo data. Here we present a re-evaluated climate impact of a Toba-sized super-eruption based on up-to-date GISS ModelE simulations. In this study, we account for all known primary mechanisms that govern the evolution of the volcanic plume and their nonlinear interactions. The SO2 radiative effects are evaluated for the first time in coupled climate simulations with the interactive atmospheric chemistry module. We found that SO2 effects on photochemistry, dynamics, and radiative forcing are especially prominent. Due to strong absorption in ultraviolet, SO2 feedback on photochemistry partially offsets the limiting effect associated with aerosol microphysical processes. SO2 greenhouse warming soothes the radiative cooling exerted by sulfate aerosols. SO2 absorption in the shortwave and longwave causes radiative heating and lofting of the volcanic plume, and boosts the efficiency of SO2 impact on photochemistry. Our analysis shows that SO2 lifetime and magnitude of effects scale up and increase with the amount of emitted material. For a Pinatubo-sized eruption, SO2 feedbacks on chemistry and dynamics are relevant only during the initial stage of the volcanic plume evolution, while local SO2 concentrations are high. For a Toba-sized eruption, SO2 effects are as important as sulfate aerosols, and produce a less extreme volcanic winter.

Sergey Osipov↗
NASA NTRS1973

A comparison of the overall and broadband noise characteristics of full-scale and model helicopter rotors.

The broadband noise generated by full-scale and model rotors is compared in terms of spectral content and the dependence on tip speed and rotor thrust/pitch angle. Low frequency broadband noise and high frequency broadband noise are studied separately and blade 'scaling' effects are outlined. The degree of agreement between measurements and theoretical and semi-empirical prediction methods is reviewed together with the directionality patterns. The parameters relating to the overall noise are also discussed. It is shown that in general good agreement is obtained between the full-scale and model rotors when considering spectral content and the dependency of the noise levels on tip speed and thrust. The scaling factors usually considered applicable to the low frequency broadband noise do not, however, appear to apply to either the model or full scale rotors.

Leverton, J. W.↗
NASA NTRS1986

Magnetized thermal conduction fronts

The evolution of planar thermal conduction fronts in the presence of a dynamically weak, but otherwise self-consistent, magnetic field is considered. The field is assumed to be connected and untangled. In the diffusion limit for the thermal conductivity, these fronts exhibit self-similar behavior, even in the presence of a field. The role of the field is restricted to channeling the heat flux along its lines of force, and it enters into the problem as a dimensionless angle variable. 'Combing' (or opening) of insulating field lines by the evaporative flow is explicitly demonstrated. Unless the field is nearly perpendicular to the front normal in the hot gas, insulating effects are not profound. Self-similarity breaks down if the front becomes saturated, and under certain conditions magnetized saturated conduction fronts cannot propagate: the solution characteristics of the wave equation form caustics. The physical resolution is the advent of two-fluid (nonlocal) heating. Such Coulomb-heated fronts are expected to be relatively rare in typical astrophysical systems. The large-scale effects of a magnetic field on cloud evaporation in the interstellar medium are briefly discussed, and it is suggested that these fields preclude the presence of time-independent evaporative solutions. Thermal interfaces may then continue to evolve until radiative cooling halts their development; large tracts of warm 10,000 K gas may result.

Balbus, S. A.↗
NASA NTRS2012

Use NU-WRF and GCE Model to Simulate the Precipitation Processes During MC3E Campaign

One of major CRM approaches to studying precipitation processes is sometimes referred to as "cloud ensemble modeling". This approach allows many clouds of various sizes and stages of their lifecycles to be present at any given simulation time. Large-scale effects derived from observations are imposed into CRMs as forcing, and cyclic lateral boundaries are used. The advantage of this approach is that model results in terms of rainfall and QI and Q2 usually are in good agreement with observations. In addition, the model results provide cloud statistics that represent different types of clouds/cloud systems during their lifetime (life cycle). The large-scale forcing derived from MC3EI will be used to drive GCE model simulations. The model-simulated results will be compared with observations from MC3E. These GCE model-simulated datasets are especially valuable for LH algorithm developers. In addition, the regional scale model with very high-resolution, NASA Unified WRF is also used to real time forecast during the MC3E campaign to ensure that the precipitation and other meteorological forecasts are available to the flight planning team and to interpret the forecast results in terms of proposed flight scenarios. Post Mission simulations are conducted to examine the sensitivity of initial and lateral boundary conditions to cloud and precipitation processes and rainfall. We will compare model results in terms of precipitation and surface rainfall using GCE model and NU-WRF

Tao, Wei-Kuo↗
NASA NTRS1995

3D thin film microstructures for space microrobots

Micromechanisms of locomotion and a manipulator with an external skeleton like the structure of an insect are proposed. Several micro-sized models were built on silicon wafers by using polysilicon for rigid plates and polyimide for elastic joints. Due to scale effects, friction in micromechanical components is dominant as compared to the inertial forces because friction is proportional to L(exp 2) while mass is proportional to L(exp 3). Therefore, to ensure efficient motion, rotational joint that exhibits rubbing should be avoided. In this paper, paper models of a robot leg and a micro-manipulator are presented to show structures with external skeletons and elastic joints. Then the large scale implementation using plastic plates, springs, and solenoids is demonstrated. Since the assembly technique is based on paper folding, it is compatible with thin film micro-fabrication and integrated circuit (IC) planar processes. Finally, several micromechanisms were fabricated on silicon wafers to demonstrate the feasibility of building a 3D microstructure from a single planar structure that can be used for space microrobots.

Shimoyama, Isao↗
NASA NTRS2017

Climate Limits Across Space and Time on European Forest Structure

The impact climate has on forests has been extensively studied. However, the large scale effect climate has on forest structures, such as average diameters, heights and basal area are understudied in a spatially explicit manner. The limits, tipping points and thresholds that climate places on forest structures dictate the services a forest may provide, the vulnerability of a forest to mortality and the potential value of the timber there within. The majority of current research either investigates climate impacts on forest pools and fluxes, on a tree physiological scale or on case studies that are used to extrapolate results and potential impacts. A spatially explicit study on how climate affects forest structure over a large region would give valuable information to stakeholders who are more concerned with ecosystem services that cannot be described by pools and fluxes but require spatially explicit information - such as biodiversity, habitat suitability, and market values. In this study, we quantified the limits that climate (maximum, minimum temperature and precipitation) places on 3 forest structures, diameter at breast height, height, and basal area throughout Europe. Our results show clear climatic zones of high and low upper limits for each forest structure variable studied. We also spatially analyzed how climate restricts the potential bio-physical upper limits and creates tipping points of each forest structure variable and which climate factors are most limiting. Further, we demonstrated how the climate change has affected 8 individual forests across Europe and then the continent as a whole. We find that diameter, height and basal area are limited by climate in different ways and that areas may have high upper limits in one structure and low upper limits in another limited by different climate variables. We also found that even though individual forests may have increased their potential upper limit forest structure values, European forests as a whole have lost, on average, 5.0%, 1.7% and 6.5% in potential mean forest diameter, height and basal area, respectively.

Moreno, Adam La Salle↗
NASA NTRS1991

Effects of vegetation on soil moisture distribution and flux with implications for the global hydrologic cycle

Recent climate modeling experiments have identified the critical need for a better understanding of land surface - atmosphere interactions. An important issue in global climate modeling is to be able to relate land surface and atmospheric processes. In the past this link has been inadequately represented due to the lack of understanding of the interaction between the processes and also due to the large spatial variability of the hydrological and soil properties. A project was initiated at the Marshall Space Flight Center (MSFC) in FY-90 under the Center's Directorate Discretionary Fund (CDDF) to study small-scale effects of vegetation on the distribution and fluxes of soil moisture. Installation of a large array of instruments was accomplished during that first year (FY-90). During this second year of the project, the instrumentation and data collection systems were improved and data has begun to be taken. Preliminary analysis of the data show that the equipment has been functioning properly. Some of the preliminary results that have recently been analyzed are given.

Macari, Emir Jose↗
NASA NTRS1983

On photochemical heating of cometary comae - The cases of H2O and CO-rich comets

It is found that the effect of energy addition due to photochemical processes in the cometary coma on the heating and accelerating of the expanding neutral gas is limited by the kinematic property of the energy transfer from the energetic fragments to the bulk flow. The effective scale length of the photochemical zone for an H2O comet is estimated to be only 10% of the dimension of the collision region due to the large mass ratio of H atom and H2O molecule. When this physical property is taken into consideration, the H2O gas is found to be expanding at a highly supersonic speed. In addition, it is shown that the addition of a mixture of CO and/or CO2 molecules in a medium-bright comet with total production rate of 10 to the 29th molecules/s would not change this conclusion since the photodissiation length scales of these molecules are a factor of 10-30 larger than that of the H2O molecules. Thus, most of the CO and CO2 molecules will be dissociated outside of the collision zone without depositing the excess kinetic energy to the neutral atmosphere. However, if the gas production rate is controlled by CO or CO2, the dimension of the collision zone of a CO comet at 1 AU will be increased by a factor of seven. The photochemical heating due to CO dissociation would thus be more effective, causing the atmospheric flow to be weakly supersonic. It is concluded that the neutral gas outflows from H2O comets and CO comets could be substantially different.

Ip, W.-H.↗
NASA NTRS1997

Large Eddy Simulation of Aircraft Wake Vortices: Atmospheric Turbulence Effects

Crow instability can develop in most atmospheric turbulence levels, however, the ring vortices may not form in extremely strong turbulence cases due to strong dissipation of the vortices. It appears that strong turbulence tends to accelerate the occurrences of Crow instability. The wavelength of the most unstable mode is estimated to be about 5b(sub 0), which is less than the theoretical value of 8.6b(sub 0) (Crow, 1970) and may be due to limited domain size and highly nonlinear turbulent flow characteristics. Three-dimensional turbulence can decay wake vortices more rapidly. Axial velocity may be developed by vertical distortion of a vortex pair due to Crow instability or large turbulent eddy motion. More experiments with various non-dimensional turbulence levels are necessary to get useful statistics of wake vortex behavior due to turbulence. Need to investigate larger turbulence length scale effects by enlarging domain size or using grid nesting.

Han, Jongil↗
NASA NTRS1992

On the scaling of small-scale jet noise to large scale

An examination was made of several published jet noise studies for the purpose of evaluating scale effects important to the simulation of jet aeroacoustics. Several studies confirmed that small conical jets, one as small as 59 mm diameter, could be used to correctly simulate the overall or PNL noise of large jets dominated by mixing noise. However, the detailed acoustic spectra of large jets are more difficult to simulate because of the lack of broad-band turbulence spectra in small jets. One study indicated that a jet Reynolds number of 5 x 10 exp 6 based on exhaust diameter enabled the generation of broad-band noise representative of large jet mixing noise. Jet suppressor aeroacoustics is even more difficult to simulate at small scale because of the small mixer nozzles with flows sensitive to Reynolds number. Likewise, one study showed incorrect ejector mixing and entrainment using small-scale, short ejector that led to poor acoustic scaling. Conversely, fairly good results were found with a longer ejector and, in a different study, with a 32-chute suppressor nozzle. Finally, it was found that small-scale aeroacoustic resonance produced by jets impacting ground boards does not reproduce at large scale.

Soderman, Paul T.↗
NASA NTRS1984

Gravity, body mass and composition, and metabolic rate

The scale effects of increased gravitational loading by chronic centrifugation on metabolic rate and body composition in metabolically mature mammals were investigated. Individual oxygen consumption rates in groups of 12 each, 8-month-old, hamster, rats, guinea pigs, and rabbits were measured at weekly intervals at 1.0 g, then 2.0 g for 6 weeks. Metabolic rate was increased significantly in all species, and stabilized after 2 weeks at 2.0 g. Statistical analysis of the data revealed that the larger the animal the greater was the increase in mass-specific metabolic rate, or metabolic intensity, over the 1.0 g value for the same animal, with the result that the interspecies allometric scaling relationship between metabolic rate and total body mass is different at 2.0 g compared 10 1.0 g. Analysis of covariance shows that the postioning constant at 2.0 g is increased by 17% at 2.0 g at the P .001 level, and the exponent is increased by 8% at the P = 0.008 level. Thus, the hypothesis that augmented gravitational loading should shift the allometric relationship between metabolic rate and body size by an increase in both parameters is supported.

Pace, N.↗
NASA NTRS2003

Cloud Modeling Using Field Project Data for the Study of Precipitation Processes

The use of cloud-resolving models (CRMs) in the study of precipitation process and their relation to the large-scale environment can be generally categorized into two approaches. The first approach is so called "cloud ensemble modeling". In this approach, many clouds of different size in various stages of their lifecycles can be present at any model simulation time. Large-scale effects are derived from observations and imposed into the model as the main forcing. The advantage of this approach is that the modeled convection will be forced to have the same intensity, thermodynamic budget and organization as the obserations.This approach will also allow CRMs to perform multi-day or multi-week time integrations. The second approach usually requires initial temperature and water vapor profiles that have a medium to large CAPE, and open lateral boundary conditions are used. The modeled clouds could be termed "self-forced convection". Model improvements, such as in the microphysics, are achieved using the second approach. In cloud ensemble modeling, accurate large-scale advective tendencies for temperature and water vapor are the main forcing for the CRMs. We found that the large-scale advective terms for temperature and water vapor are not always consistent, For example, large-scale forcing could indicate strong drying which would produce cooling in the model through evaporation but not contain large-scale advective heating to compensate. This discrepancy in forcing would cause differences between the observed and modeled latent heating profiles. Good measurements of other quantities (i.e., surface fluxes and radiation) are also required to perform variational objective analysis that computes and minimizes a "cost function" that constrains the difference between the large-scale advective forcing in temperature and water vapor. With self-forced convection, accurate vertical distributions of temperature, moisture (water vapor), and horizontal winds are required. The timing of the measurements relative to cloud development is crucial (i.e., prior to cloud triggering). Microphysical measurements (i.e., the cloud number concentration and size distribution) can also be used in this second approach but are of secondary importance with cloud ensemble modeling. In this paper, data collected during TRMM field campaigns (FCs; i.e., SCSMEX, LBA and KWAJEX) which were aimed at validating TRMM products (i.e., rainfall and the vertical distribution of latent heating) will be used to examine the impact of errors in the initial conditions (e.g.., soundings an large-scale forcing) on simulated rainfall distributions and brightness. Rainfall and precipitations simulated from a CRM will also be compared with those estimated by a schocastic model.

Tao, W.-K.↗
NASA NTRS1992

On the scaling of small-scale jet noise to large scale

An examination was made of several published jet noise studies for the purpose of evaluating scale effects important to the simulation of jet aeroacoustics. Several studies confirmed that small conical jets, one as small as 59 mm diameter, could be used to correctly simulate the overall or perceived noise level (PNL) noise of large jets dominated by mixing noise. However, the detailed acoustic spectra of large jets are more difficult to simulate because of the lack of broad-band turbulence spectra in small jets. One study indicated that a jet Reynolds number of 5 x 10(exp 6) based on exhaust diameter enabled the generation of broad-band noise representative of large jet mixing noise. Jet suppressor aeroacoustics is even more difficult to simulate at small scale because of the small mixer nozzles with flows sensitive to Reynolds number. Likewise, one study showed incorrect ejector mixing and entrainment using a small-scale, short ejector that led to poor acoustic scaling. Conversely, fairly good results were found with a longer ejector and, in a different study, with a 32-chute suppressor nozzle. Finally, it was found that small-scale aeroacoustic resonance produced by jets impacting ground boards does not reproduce at large scale.

Soderman, Paul T.↗