SEARCH · Search NASA

Results for “SERIES EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Shuttle program. Onorbit navigation integrator results for typical shuttle orbits

Three types of navigation onorbit numerical integrators were evaluated: (1) power integrators with no delta-V incorporation, just coasting (using Taylor series expansion integrators); (2) coasting integrators using the Cowell method of special perturbations; and (3) coasting integrator using the Pines variation of parameter perturbation method. Results show that the super G integrator is a very simple and effective for 2 and 4 second time steps. Since IMU delta-V data can be easily incorporated in the integration scheme, its use as the standard onorbit navigation propagator for the maintenance of the current state was implemented in the onboard navigation software. The Pines formulation method with a Runge-Kutta-Gill fourth-order integrator method produces excellent results up to 300 second time steps. On orbit prediction with this method was implemented in the onboard onorbit navigation scheme. The Runge-Kutta third order, using Cowell's method, is an excellent general purpose determination integrator for time steps up to a 60 second duration.

Olszewski, O. W.↗

NASA NTRS1980

A mathematical representation of an advanced helicopter for piloted simulator investigations of control system and display variations

A mathematical model of an advanced helicopter is described. The model is suitable for use in control/display research involving piloted simulation. The general design approach for the six degree of freedom equations of motion is to use the full set of nonlinear gravitational and inertial terms of the equations and to express the aerodynamic forces and moments as the reference values and first order terms of a Taylor series expansion about a reference trajectory defined as a function of longitudinal airspeed. Provisions for several different specific and generic flight control systems are included in the model. The logic required to drive various flight control and weapon delivery symbols on a pilot's electronic display is also provided. Finally, the model includes a simplified representation of low altitude wind and turbulence effects. This model was used in a piloted simulator investigation of the effects of control system and display variations for an attack helicopter mission.

Aiken, E. W.↗

NASA NTRS1979

SCF and CI calculations of the dipole moment function of ozone

The constant and linear terms in a Taylor series expansion of the dipole moment function of the ground state of ozone are calculated with Cartesian Gaussian basis sets ranging in quality from minimal to double zeta plus polarization. Results are presented at both the self-consistent field and configuration-interaction levels. Although the algebraic signs of the linear dipole moment derivatives are all established to be positive, the absolute magnitudes of these quantities, as well as the infrared intensities calculated from them, vary considerably with the level of theory.

Curtiss, L. A.↗

NASA NTRS1980

Iterative solutions for one-dimensional diffusion with time varying surface composition and composition-dependent diffusion coefficient

Solutions are given for one-dimensional diffusion problems with a time varying surface composition and also a composition dependent diffusion coefficient. The most general solution does not require special mathematical functions to fit the variation in surface composition or D(C). In another solution, a series expansion may be used to fit the time dependent surface concentration. These solutions make use of iterative calculations that converge rapidly and are highly stable. Computer times are much shorter than that required for finite difference calculations and can efficiently make use of interactive graphics terminals. Existing gas carburization data were used to provide an illustration of an iterative approach with a time varying carbon composition at the free surface.

Chow, M.↗

NASA NTRS1980

Neutral stability calculations for boundary-layer flows

An analysis is presented of the parallel neutral stability of three-dimensional incompressible, isothermal boundary-layer flows. A Taylor-series expansion of the dispersion relation is used to derive the general eigenvalues. These equations are functions of the complex group velocity. These relations are verified by numerical results obtained for two- and three-dimensional disturbances in two- and three-dimensional flows.

Nayfeh, A. H.↗

NASA NTRS1980

Predicting major element mineral/melt equilibria - A statistical approach

Empirical equations have been developed for calculating the mole fractions of NaO0.5, MgO, AlO1.5, SiO2, KO0.5, CaO, TiO2, and FeO in a solid phase of initially unknown identity given only the composition of the coexisting silicate melt. The approach involves a linear multivariate regression analysis in which solid composition is expressed as a Taylor series expansion of the liquid compositions. An internally consistent precision of approximately 0.94 is obtained, that is, the nature of the liquidus phase in the input data set can be correctly predicted for approximately 94% of the entries. The composition of the liquidus phase may be calculated to better than 5 mol % absolute. An important feature of this 'generalized solid' model is its reversibility; that is, the dependent and independent variables in the linear multivariate regression may be inverted to permit prediction of the composition of a silicate liquid produced by equilibrium partial melting of a polymineralic source assemblage.

Hostetler, C. J.↗

NASA NTRS1982

Far-Field Antenna Pattern From a Near-Field Test

Plane/polar geometry simplifies measurement of near-field data for this antenna and allows a determination of far-field pattern by Jacobi-Bessel series expansion of data. Measuring probe is an undersized, dielectrically loaded and open-ended waveguide with a far-field pattern similar to that of a small magnetic dipole in its forward directions, making it unnecessary to rotate probe in direction similar to antenna rotation.

Rahmat-Samii, Y.↗

NASA NTRS1982

Dielectrophoretic levitation of droplets and bubbles

Uncharged droplets and bubbles can be levitated dielectrophoretically in liquids using strong, nonuniform electric fields. The general equations of motion for a droplet or bubble in an axisymmetric, divergence-free electrostatic field allow determination of the conditions necessary and sufficient for stable levitation. The design of dielectrophoretic (DEP) levitation electrode structures is simplified by a Taylor-series expansion of cusped axisymmetric electrostatic fields. Extensive experimental measurements on bubbles in insulating liquids verify the simple dielectrophoretic model. Other have extended dielectrophoretic levitation to very small particles in aqueous media. Applications of DEP levitation to the study of gas bubbles, liquid droplets, and solid particles are discussed. Some of these applications are of special interest in the reduced gravitational field of a spacecraft.

Jones, T. B.↗

NASA NTRS1982

Toward a better understanding of helicopter stability derivatives

An amended six degree of freedom helicopter stability and control derivative model was developed in which body acceleration and control rate derivatives were included in the Taylor series expansion. These additional derivatives were derived from consideration of the effects of the higher order rotor flapping dynamics, which are known to be inadequately represented in the conventional six degree of freedom, quasistatic stability derivative model. The amended model was a substantial improvement over the conventional model, effectively doubling the unsable bandwidth and providing a more accurate representation of the short period and cross axis characteristics. Further investigations assessed the applicability of the two stability derivative model structures for flight test parameter identification. Parameters were identified using simulation data generated from a higher order base line model having sixth order rotor tip path plane dynamics. Three lower order models were identified: one using the conventional stability derivative model structure, a second using the amended six degree of freedom model structure, and a third model having eight degrees of freedom that included a simplified rotor tip path plane tilt representation.

Hansen, R. S.↗

NASA NTRS1981

Scan performance of dual offset reflector antennas for satellite communications

The basic numerical steps of a method to analyze dual offset reflector antennas are reviewed. The technique employs an alternative approach to calculating the secondary pattern of an arbitrarily shaped offset dual reflector antenna, and is based on the application of the geometrical theory of diffraction from the subreflector and physical optics (PO) scattering from the main reflector. The PO integral is evaluated using the Jacobi-Bessel series expansions, and numerical results are presented for the off-axis scan performance of an offset clear aperture Cassegrain antenna. Results indicate that the equivalent paraboloid concept can be used to determine the location of displaced feed and define the local optimal focal plane, and the scan performance of the Cassegrain reflector can be improved if the feed is located on the true opimal surface.

Rahmat-Samii, Y.↗

NASA NTRS1982

A note on Compton scattering

Calculations are presented on the energy exchange between free electrons and electromagnetic radiation. The full Klein-Nishina cross section is used in evaluating average scattering coefficients for an electron moving with arbitrary velocity. A number of useful series expansions for the mean energy and mean square energy transfer rates are presented. A Fokker-Planck equation that includes induced scattering is used in deriving a generalized diffusion equation in frequency for multiple scattering of photons of nonrelativistic electrons. The relationship of the Klein-Nishina cross section to that of classical electromagnetic radiation theory is elucidated.

Barbosa, D. D.↗

NASA NTRS1982

Exact triple integrals of beam functions

Definite triple integrals encountered in applying the Galerkin method to the problem of heat and mass transfer across rectangular enclosures are discussed. Rather than evaluating them numerically, the technique described by Reid and Harris (1958) was extended to obtain the exact solution of the integrals. In the process, four linear simultaneous equations with triple integrals as unknowns were obtained. These equations were then solved exactly to obtain the closed form solution. Since closed form representations of this type have been shown to be useful in solving nonlinear hydrodynamic problems by series expansion, the integrals are presented here in general form.

Jhaveri, B. S.↗

NASA NTRS1982

Fundamental aspects in quantitative ultrasonic determination of fracture toughness: The scattering of a single ellipsoidal inhomogeneity

The scattering of a single ellipsoidal inhomogeneity is studied via an eigenstrain approach. The displacement field is given in terms of volume integrals that involve eigenstrains that are related to mismatch in mass density and that in elastic moduli. The governing equations for these unknown eigenstrains are derived. Agreement with other approaches for the scattering problem is shown. The formulation is general and both the inhomogeneity and the host medium can be anisotrophic. The axisymmetric scattering of an ellipsoidal inhomogeneity in a linear elastic isotropic medium is given as an example. The angular and frequency dependence of the scattered displacement field, the differential and total cross sections are formally given in series expansions for the case of uniformly distributed eigenstrains.

Fu, L. S. W.↗

NASA NTRS1982

Computer tomography of flows external to test models

Computer tomographic techniques for reconstruction of three-dimensional aerodynamic density fields, from interferograms recorded from several different viewing directions were studied. Emphasis is on the case in which an opaque object such as a test model in a wind tunnel obscures significant regions of the interferograms (projection data). A method called the Iterative Convolution Method (ICM), existing methods in which the field is represented by a series expansions, and analysis of real experimental data in the form of aerodynamic interferograms are discussed.

Prikryl, I.↗

NASA NTRS1982

An optimization technique for lumped-distributed two ports

A frequency domain direct efficient analysis and an optimization technique of a large class of lumped-distributed networks containing active elements are presented. Sensitivity and Hessian matrix calculations are performed using truncated Taylor series expansion of two-port parameters of subnetworks. An interactive computer program was developed to demonstrate the application of the method. Examples of network optimizations are included to illustrate the powerfulness of the technique.

Iobst, K. W.↗

NASA NTRS1983

Parallel solution of finite element equations

The paper examines several parallel processing solution algorithms for finite element equations arising in linear equilibrium problems. Two basic groups of algorithms, direct and iterative, are investigated with respect to a number of parallel computer architectures and associated selection criteria. The direct algorithms include: LR-Gauss, Crout, Cholesky, Cyclic Reduction and WZ-factorization. The iterative methods examined are: Accelerated Gauss-Seidel, Surrogate Stiffness, Jacobi, Series Expansion, and Energy Monte Carlo. For real-time applications, where the object is to minimize the execution time, Cyclic Reduction appears to be best suited. This assumes a computer with an unlimited number of parallel processors. However, for computers with a limited number of parallel processors that must be used efficiently, both Gauss factorization and Jacobi-like iterative methods rank favorably.

Salama, M.↗

NASA NTRS1983

The stress intensity factor for the double cantilever beam

Fourier transforms and the Wiener-Hopf technique are used in conjunction with plane elastostatics to examine the singular crack tip stress field in the double cantilever beam (DCB) specimen. In place of the Dirac delta function, a family of functions which duplicates the important features of the concentrated forces without introducing unmanageable mathematical complexities is used as a loading function. With terms of order h-squared/a-squared retained in the series expansion, the dimensionless stress intensity factor is found to be K (h to the 1/2)/P = 12 to the 1/2 (a/h + 0.6728 + 0.0377 h-squared/a-squared), in which P is the magnitude of the concentrated forces per unit thickness, a is the distance from the crack tip to the points of load application, and h is the height of each cantilever beam. The result is similar to that obtained by Gross and Srawley by fitting a line to discrete results from their boundary collocation analysis.

Fichter, W. B.↗

NASA NTRS1984

Theoretical and experimental studies of error in square-law detector circuits

Square law detector circuits to determine errors from the ideal input/output characteristic function were investigated. The nonlinear circuit response is analyzed by a power series expansion containing terms through the fourth degree, from which the significant deviation from square law can be predicted. Both fixed bias current and flexible bias current configurations are considered. The latter case corresponds with the situation where the mean current can change with the application of a signal. Experimental investigations of the circuit arrangements are described. Agreement between the analytical models and the experimental results are established. Factors which contribute to differences under certain conditions are outlined.

Stanley, W. D.↗