DAPHNE Connects Satellites to the Cloud
Explore the source record for details and available documents.
Space Communications↗
SEARCH · Search NASA
Results for “SPACECRAFT COMMUNICATION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Robust Vision-based Multi-spacecraft Guidance Navigation and Control using CNN-based Pose Estimation
In this paper, we present an end-to-end simulation framework for tracking an uncooperative Target spacecraft in Low Earth Orbit using a CubeSat-class Ego spacecraft outfitted with a camera. Currently, capturing high-fidelity realistic images in space for this scenario is difficult and exorbitantly expensive. Therefore, we developed a framework to simulate the spacecraft orbits in Basilisk software and generate high-fidelity realistic images of spacecraft in Unreal Engine, including the effects from Sun, Earth, Moon and stars. The Ego spacecraft uses cameras to capture images of the uncooperative Target and estimates its position and attitude using a CNN based 6DOF pose estimation pipeline, eliminating need for large SWAP-C(Size, Weight, Power and Cost) sensors like LIDAR or reliance on inter-spacecraft communication, This CNN, which is motivated by ESA’s Pose Estimation challenge of 2019, is trained using simulated data from our end-to-end simulation framework. We compare the performance of two distinct CNNbased algorithms for pose estimation along a nominal trajectory. In presence of non-Gaussian modeling uncertainties, the statedependent estimation error is characterized with a quadratic upper-bound. The quadratically-bounded error can be used by a robust controller to maneuver
Rahmani, Amir↗
Flight Software Dictionary Development for the Mars2020 Rover
The Mars2020 project, developed and operated by the Jet Propulsion Laboratory (JPL), successfully landed the Perseverance rover and its flying companion Ingenuity on the surface of Mars on February 18th 2021. Perseverance combines heritage and cutting-edge flight software and hardware to accomplish crucial mission requirements related to Martian surface sampling. The design, development, and operation of NASA’s large strategic science missions require the ability to communicate spacecraft capabilities to hundreds of engineers across multiple disciplines. The interaction between flight and ground software development, Verification and Validation (V&V), Assembly, Test, and Launch Operations (ATLO), and management each demand quick understanding of unique slices of information for each discipline. This information includes the current capabilities of the flight system as well as future capabilities and their status as they are developed and tested. Despite the fundamental and critical nature of this information, the flight software dictionaries used to track it are a stumbling block for many projects. These dictionaries provide the cornerstone for the interpretation of data sent from the spacecraft, allowing for quick comprehension by engineers on the ground. During both spacecraft development and operations, flight software dictionary management includes significant challenges due to the large number of interfacing systems and the subtle yet distinct needs of each.The engineering of flight software dictionaries for Mars2020 had numerous challenges, most-notably: parallel dictionary development to support simultaneous separate flight software build campaigns for each mission phase (cruise and surface), managing requests for operations-enabling information without perturbing the heritage interface with the rover, and the introduction of new tools by the dictionary stakeholders that forced the dictionary team to innovate and redesign the heritage tool chain. These challenges generated guiding principles for the dictionary development effort: emphasize coding best practices and unit testing in the dictionary code development tool chain, use institutionally provided COTS (commercial-off-the-shelf) tools whenever possible, and maintain the heritage flight-ground interface all while advancing operations-enabling information via a loosely coupled interface.Throughout development and operations, the Mars2020 dictionary toolchain included IBM DOORS Next Generation, GitHub, Microsoft Excel, Docker, Jenkins, and a significant custom-built Python codebase. Significant interfaces included JPL’s command and control software, heritage flight software team tools and processes, and the many cloud-based ground tools developed for the mission.This paper will discuss the requirements for the Mars2020 dictionary development, the development team’s response to those requirements, lessons learned throughout the process, steps taken towards automated deliveries and continuous integration of stakeholder inputs, potential toolchain improvements for Mars2020, and key takeaways that could be applied to future missions.
Pyrzak, Guy↗
Orbital Debris Quarterly News, October 2023
In this issue: - ISS Maneuvers to Avoid Potential Collisions Twice in August 2023 - Derelict Cosmos Communications Spacecraft Breaks Up in June 2023 - Gene Stansbery, Former NASA Program Manager for Orbital Debris, Passes - HUSIR Radar Measurements of the Orbital Debris Environment: 2022 - Thirty Years Later: A Look Back at the 1993 JSC Perseid Stormwatch Center - IOC II Commences in December 2023 - NASA ODPO and HVIT Abstract - Conference Report - Orbital Debris Environment Plots - Space Missions and Satellite Box Score
Heather Mae Cowardin↗
Communicating by Doppler: Detecting Spacecraft Dynamics During Critical Maneuvers
Communicating information from spacecraft in deep space utilizes sophisticated techniques of modulations onto a microwave signal carrier. Under most conditions, there is a high success rate of sending commands to the spacecraft and receiving science data acquired by on-board instruments along with health and status information. There are conditions, however, where the signal dynamics are too high and/or the received signal-to-noise ratio is below the receiver threshold. Under these conditions, often by design and sometimes as a result of planned or unplanned critical maneuvers, events (e.g., orbit insertion or descent and landing), safe mode, etc., it becomes highly critical but exceedingly challenging to receive information about the health and dynamical behavior of the spacecraft. The Deep Space Network, being a world-class instrument for Radio Science research, developed openloop receivers, called the Radio Science Receiver, designed to capture the raw incoming electromagnetic signals and associated noise for Radio Science experiments; post data capture digital signal processing extracts the signal carrier for scientific analysis. This receiver provides a high level of configuration flexibility and can be optimized for the various types of experiments. In addition to its scientific utility, it proved to be useful, and in some cases critical, for the support of missions during specific scenarios were the link budget is below the threshold of the tracking receiver to maintain lock or the frequency dynamics are faster than the limits of the tracking receiver. In these cases, the signal carrier is often detected only in the open-loop receiver to provide information on the specific behavior of the spacecraft from the carrier dynamics. This paper describes the utility of the system to support mission-critical events for the three cases of Cassini's Saturn orbit insertion, Huygens Titan landing, and Mars rovers landing.
radio science↗
Critical Spacecraft-to-Earth Communications for Mars Exploration Rover (MER) entry, descent and landing
For planetary lander missions, the most challenging phase of the spacecraft to ground communications is during the entry, descent, and landing (EDL). As each 2003 Mars Exploration Rover (MER) enters the Martian atmosphere, it slows dramatically. The extreme acceleration and jerk cause extreme Doppler dynamics on the X-band signal received on Earth. When the vehicle slows sufficiently, the parachute is deployed, causing almost a step in deceleration. After parachute deployment, the lander is lowered beneath the parachute on a bridle. The swinging motion of the lander imparts high Doppler dynamics on the signal and causes the received signal strength to vary widely, due to changing antenna pointing angles. All this time, the vehicle transmits important health and status information that is especially critical if the landing is not successful. Even using the largest Deep Space Network antennas, the weak signal and high dynamics render it impossible to conduct reliable phase coherent communications. Therefore, a specialized form of frequency-shift-keying will be used. This paper describes the EDL scenario, the signal conditions, the methods used to detect and frequency-track the carrier and to detect the data modulation, and the resulting performance estimates.
entry, descent, and landing communications↗
Spacecraft design project: High latitude communications satellite
The spacecraft design project was part of AE-4871, Advanced Spacecraft Design. The project was intended to provide experience in the design of all major components of a satellite. Each member of the class was given primary responsibility for a subsystem or design support function. Support was requested from the Naval Research Laboratory to augment the Naval Postgraduate School faculty. Analysis and design of each subsystem was done to the extent possible within the constraints of an eleven week quarter and the design facilities (hardware and software) available. The project team chose to evaluate the design of a high latitude communications satellite as representative of the design issues and tradeoffs necessary for a wide range of satellites. The High-Latitude Communications Satellite (HILACS) will provide a continuous UHF communications link between stations located north of the region covered by geosynchronous communications satellites, i.e., the area above approximately 60 N latitude. HILACS will also provide a communications link to stations below 60 N via a relay Net Control Station (NCS), which is located with access to both the HILACS and geosynchronous communications satellites. The communications payload will operate only for that portion of the orbit necessary to provide specified coverage.
Josefson, Carl↗
The feasibility of a direct relay of Apollo spacecraft data via a communication satellite
Feasibility of direct relay of Apollo spacecraft data via communications satellite
APOLLO SPACECRAFT↗
Spacecraft-to-Earth communications for Juno and Mars Science Laboratory critical events
This paper describes the Entry, Descent, and Landing (EDL) Data Analysis (EDA) system. The EDA software supports the real-time interpretation of Multiple Frequency-Shift Keying tones provided by the spacecraft. The objective of this software is to provide communication of status between the spacecraft and the mission personnel on Earth during critical events when low rate telemetry is not possible. Although these communications cannot be used to affect the landing due to the length of time required at these distances, this information is important in the case of a mission failure. Mars Science Laboratory (MSL) will utilize the EDA software during EDL. Juno usage will include deep space maneuvers, Jupiter orbital insertion, and its period reduction maneuver. Results are presented from the Juno tones test. Simulated MSL and Juno signals were also generated and these results are analyzed.
Navarro, Robert↗
Comparison of Communication Architectures for Spacecraft Modular Avionics Systems
This document is a survey of publicly available information concerning serial communication architectures used, or proposed to be used, in aeronautic and aerospace applications. It focuses on serial communication architectures that are suitable for low-latency or real-time communication between physically distributed nodes in a system. Candidates for the study have either extensive deployment in the field, or appear to be viable for near-term deployment. Eleven different serial communication architectures are considered, and a brief description of each is given with the salient features summarized in a table in appendix A. This survey is a product of the Propulsion High Impact Avionics Technology (PHIAT) Project at NASA Marshall Space Flight Center (MSFC). PHIAT was originally funded under the Next Generation Launch Technology (NGLT) Program to develop avionics technologies for control of next generation reusable rocket engines. After the announcement of the Space Exploration Initiative, the scope of the project was expanded to include vehicle systems control for human and robotics missions. As such, a section is included presenting the rationale used for selection of a time-triggered architecture for implementation of the avionics demonstration hardware developed by the project team
Gwaltney, D. A.↗
GOPEX - A deep-space optical communications demonstration with the Galileo spacecraft
The Galileo Optical communications from an Earth-based Xmtr (GOPEX) demonstration is designed to exhibit deep-space optical communications using the Galileo spacecraft. The optical transmitter consists of a Nd:YAG laser coupled to a 24-in. telescope at the Table Mountain Observatory (TMO), and the receiver is the Solid-State Imaging camera on board Galileo. The objectives of the demonstration are to understand the issues involved in blind-pointing to a spacecraft in deep space, and to assess the quality of the optical uplink by comparing the experimental results with theoretical predictions. The demonstration is proposed for December 1992 during the second earth-flyby period of Galileo's trajectory.
Wilson, Keith E.↗
Communications to and from lunar and planetary spacecraft
Frequency assignment for communications to and from lunar and planetary spacecraft
SPACECRAFT COMMUNICATION↗
Telemetry down-link Doppler as an attitude sensor for spin stabilized spacecraft
The communications antenna on a spin stabilized spacecraft is seldom located on the spin axis, hence, the antenna is in motion relative to the center of mass of the spacecraft. The Doppler shift observed at the ground or space relay communications receivers will include oscillations whose frequency and amplitude are functions of the motion of the antenna and the attitude of the spacecraft relative to the line of sight (LOS). This functional dependence creates the possibility of estimating attitude parameters from Doppler measurements. This paper presents mathematical models of Doppler oscillations from spinning spacecraft, including the effects of nutation. Algorithms for estimating spin rate, attitude and nutation angle are described. Results of analysis of Doppler tracking of GOES-8 and WIND are also discussed.
Hendry, S. D.↗
Infrared Communications for Small Spacecraft: From a Wireless Bus to Cluster Concepts
Nanosatellites operating singly or in clusters are anticipated for future space science missions. To implement this new communications paradigm, we are approaching cluster communications by first developing an infrared (IR) intra-craft wireless bus capability, following initially the MIL-STD-1553B protocol. Benefits of an IR wireless bus are low mass, size, power, and cost, simplicity of implementation, ease of use, minimum EMI, and efficient and reliable data transfer. Our goals are to maximize the reliable link margin in order to afford greater flexibility in receiver placement, which will ease technology insertion. We have developed a concept demonstration using a high-speed visible-band silicon PIN photodiode and a high-efficiency visible LED operating at a data rate up to 4 Mb/sec. In designing an internal IR wireless bus, we have characterized various candidate materials, emitters, and geometries, assuming a single reflection. Thus, we have measured the bidirectional reflectance distribution function (BRDF) for five different materials characteristic of typical spacecraft structures, which range from nearly Lambertian to highly specular. We have fit our data to empirical BRDF functions and modeled the detected irradiance anywhere in the plane of incidence for a divergent (LED) emitter. We have also determined the angular limits on the link geometry to remain within the required bit error rate by determining the received signal-to-noise ratio (SNR) for minimum values of irradiance received at the detector.
Webb, Suzanne C.↗
High Capacity Communications From Martian Distances: Spacecraft Link Design Analysis - Part 1
High capacity space communications has been a desire for Human Exploration and Science missions. Current Mars missions operate at data rates of 120 kbps for telemetry downlink and it is desirable to study high rate communication links in the range of 100 Mbps to 1 Gbps data rates from Martian distances. This paper will present some assumed scenarios along with link design assumptions and link analysis for high capacity communications from Mars. The paper will focus on RF subsystems namely antenna and power for the downlink communication from a relay orbiter at Mars. The relay orbiter will communicate with the low orbit spacecrafts at Mars or any Martian surface elements such as robots, and relay the data back to the ground networks on Earth. The study will dive into the spacecraft downlink system design and communication link analysis between the relay orbiter and ground network on Earth for data rates ranging from 100 Mbps to 1 Gbps based on the assumed scenarios and link assumptions. With high rate links at larger distances, there will be a significant impact on the antenna and power requirements and the link design will make an attempt to minimize the mass of the RF subsystem on the spacecraft. The results of this study will be presented for three data rates 1 Gbps, 500 Mbps and 100 Mbps at maximum Mars to Earth distance of 2.67AU. The design will use a Ka-band downlink with 90% link availability, along with various ground network G/T assumptions and possible bandwidth efficient modulations. The paper will conclude with what types of high rate communication links are feasible from Martian distances and also identify a range of requirements for antenna and power technologies for these high capacity communications from Mars.
Ka-Band communications↗
Spacecraft-to-Earth Communications for Juno and Mars Science Laboratory Critical Events
Deep Space communications typically utilize closed loop receivers and Binary Phase Shift Keying (BPSK) or Quadrature Phase Shift Keying (QPSK). Critical spacecraft events include orbit insertion and entry, descent, and landing.---Low gain antennas--> low signal -to-noise-ratio.---High dynamics such as parachute deployment or spin --> Doppler shift. During critical events, open loop receivers and Multiple Frequency Shift Keying (MFSK) used. Entry, Descent, Landing (EDL) Data Analysis (EDA) system detects tones in real-time.
radio science↗
Cognitive Engine One: A Cross-Layer Framework for Autonomy in Multi-Provider Space Communications Environments
Spacecraft information needs, along with the communications environments in which data transfers occur, are becoming increasingly dynamic. Earth orbit is served by dozens of ground station and relay satellite providers – each with unique protocols and service capabilities. In this context, we present a system to automate end-to-end space communications across the protocol stack for each of several providers. The proposed system schedules contacts with providers, configures point-to-point RF links, and ensures data is transferred to its destination. Data monitoring and rescheduling provide an automated failover capability in the event of unsuccessful contacts. We verify system performance in a high-fidelity emulation testbed. Results from several scenarios demonstrate favorable system performance across a variety of mission use cases.
space communications↗
HF and VHF communications circuits - Earth orbiting spacecraft and ground stations
HF and VHF communications circuits for Earth orbiting spacecraft and ground stations
Towey, J. M.↗