Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPACECRAFT MANEUVER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Spacecraft flight simulation: A human factors investigation into the man-machine interface between an astronaut and a spacecraft performing docking maneuvers and other proximity operations

The anticipated increase in rendezvous and docking activities in the various space programs in the Space Station era necessitates a renewed interest in manual docking procedures. Ten test subjects participated in computer simulated docking missions in which the influence of initial velocity was examined. All missions started from a resting position of 304.8 meters (1000 feet) along the space station's +V-bar axis. Test subjects controlled their vehicle with a translational hand controller and digital auto pilot which are both virtually identical to their space shuttle counterparts. While the 0.1 percent rule (range rate is equal to 0.1 percent of the range) used by space shuttle pilots is comfortably safe, it is revealed to be extremely inefficient in terms of time and not justifiable in terms of marginal safety. Time is worth money, not only because of training and launch costs, but because the sooner a pilot and spacecraft return from a mission, the sooner they can begin the next one. Inexperienced test subjects reduced the costs of simulated docking by close to a factor of 2 and achieved safe dockings in less than 4 percent of the time the baseline approach would entail. This reduction in time can be used to save lives in the event of an accident on orbit, and can tremendously reduce docking costs if fuel is produced from waste water on orbit.

Brody, Adam R.↗
NASA NTRS2013

Sequential Probability Ratio Test for Spacecraft Collision Avoidance Maneuver Decisions

A document discusses sequential probability ratio tests that explicitly allow decision-makers to incorporate false alarm and missed detection risks, and are potentially less sensitive to modeling errors than a procedure that relies solely on a probability of collision threshold. Recent work on constrained Kalman filtering has suggested an approach to formulating such a test for collision avoidance maneuver decisions: a filter bank with two norm-inequality-constrained epoch-state extended Kalman filters. One filter models the null hypotheses that the miss distance is inside the combined hard body radius at the predicted time of closest approach, and one filter models the alternative hypothesis. The epoch-state filter developed for this method explicitly accounts for any process noise present in the system. The method appears to work well using a realistic example based on an upcoming, highly elliptical orbit formation flying mission.

Carpenter, J. Russell↗
NASA NTRS2010

Spacecraft Attitude Tracking and Maneuver Using Combined Magnetic Actuators

The accuracy of spacecraft attitude control using magnetic actuators only is low and on the order of 0.4-5 degrees. The key reason is that the magnetic torque is two-dimensional and it is only in the plane perpendicular to the magnetic field vector. In this paper novel attitude control algorithms using the combination of magnetic actuators with Reaction Wheel Assembles (RWAs) or other types of actuators, such as thrusters, are presented. The combination of magnetic actuators with one or two RWAs aligned with different body axis expands the two-dimensional control torque to three-dimensional. The algorithms can guarantee the spacecraft attitude and rates to track the commanded attitude precisely. A design example is presented for Nadir pointing, pitch and yaw maneuvers. The results show that precise attitude tracking can be reached and the attitude control accuracy is comparable with RWAs based attitude control. The algorithms are also useful for the RWAs based attitude control. When there are only one or two workable RWAs due to RWA failures, the attitude control system can switch to the control algorithms for the combined magnetic actuators with the RWAs without going to the safe mode and the control accuracy can be maintained.

Zhou, Zhiqiang↗
NASA NTRS1987

Slew maneuver dynamics of the Spacecraft Control Laboratory experiment

Mathematical expressions for slew maneuver dynamics are presented. The total kinetic energy expression of the system is given as T = T(0) + T(1) + T(2), where T(0), T(1), and T(2) refer to the kinetic energies of the shuttle, the flexible beam, and the tip mass (the reflector), respectively. The specific equations for each of these are defined and integrated into the total energy expression. Using the chain rule in the Lagrange equations and an expression allowing the transformation of the orbiter angular velocity from the inertial frame to the body-fixed frame, the rotational equations are obtained. Finally, the vibration equations for the beam are derived, again using the Lagrange equations.

Kakad, Y. P.↗
NASA NTRS1992

Particle simulation of rarefied aeropass maneuvers of the Magellan spacecraft

Rarefied and free molecular flowfields corresponding to proposed aeropass maneuvers through the atmosphere of Venus by the Magellan spacecraft are computed with a vectorized particle simulation method. The significance of rarefaction and reaction effects are assessed and surface heat flux, drag coefficients, and flowfield properties are computed. A simple surface heat transfer model is coupled directly to the simulation and assumes that each surface element is in radiative equilibrium with deep space. This allows direct computation of surface temperature distributions rather than requiring prescribed isothermal boundary conditions. Uncoupled dual-node heat transfer models, which account for heat capacity and thermal conductivity within each structural component, permit more accurate determination of surface temperatures. Such temperatures restrict the allowable altitudes and entry speeds of the aeropass maneuvers, and must therefore be estimated accurately. Simulations with an entry velocity of 8600 m/s at altitudes between 125 and 140 km reveal that allowable surface temperatures occur only at the highest altitudes where the flowfield is appropriately modeled as free-molecular. Excessive surface heat flux occurs at lower altitudes where molecular collisions are significant.

Haas, Brian L.↗
NASA NTRS1980

Delta V errors due to attitude correction maneuvers of a spinning spacecraft

A statistical error analysis has been performed to evaluate the change in velocity of a spin stabilized spacecraft due to thruster induced attitude correction maneuvers. Analytical expressions were developed to determine the mean and variance of the velocity in terms of the nominal values and uncertainties of key spacecraft parameters. These parameters include thrust, thruster timing, thruster alignment, plume impingement force and estimated spacecraft mass. Typical values of these parameters and their uncertainties for NASA's Galileo spacecraft were used to evaluate these expressions. The results of the analysis allow the effect of attitude correction maneuvers to be evaluated with respect to the functional requirements on nongravitational acceleration. Other results include the identification of major sources of delta V error and studies of the sensitivity of delta V to variations in the error sources.

Zipursky, H. J.↗
NASA NTRS1987

Control of Spacecraft Control Laboratory Experiment (SCOLE) slew maneuvers

This is the second report of a set of two reports on the dynamics and control of slewing maneuvers of NASA Spacecraft Control Laboratory Experiment (SCOLE). The control problem of slewing maneuvers of SCOLE is developed in terms of an arbitrary maneuver about any given axis. The control system is developed for the combined problem of rigid-body slew maneuver and vibration suppression of flexible appendage. The control problem is formulated by incorporating the nonlinear equations derived in the previous report and is expressed in terms of a two-point boundary value problem utilizing a quadratic type of performance index. The two-point boundary value problem is solved as a hierarchical control problem with the overall system being split in terms of two subsystems, namely the slewing of the entire assembly and the vibration suppression of the flexible antenna. The coupling variables between the two dynamical subsystems are identified and these two subsystems for control purposes are treated independently in parallel at the first level. Then the state-space trajectory of the combined problem is optimized at the second level.

Kakad, Y. P.↗
NASA NTRS2003

On-Orbit Cross-Calibration of AM Satellite Remote Sensing Instruments using the Moon

On April 14,2003, three Earth remote sensing spacecraft were maneuvered enabling six satellite instruments operating in the visible through shortwave infrared wavelength region to view the Moon for purposes of on-orbit cross-calibration. These instruments included the Moderate Resolution Imaging Spectroradiometer (MODIS), the Multi-angle Imaging SpectroRadiometer (MISR), the Advanced Spaceborne Thermal Emission and Reflection (ASTER) radiometer on the Earth Observing System (EOS) Terra spacecraft, the Advanced Land Imager (ALI) and Hyperion instrument on Earth Observing-1 (EO-1) spacecraft, and the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) on the SeaStar spacecraft. Observations of the Moon were compared using a spectral photometric mode for lunar irradiance developed by the Robotic Lunar Observatory (ROLO) project located at the United States Geological Survey in Flagstaff, Arizona. The ROLO model effectively accounts for variations in lunar irradiance corresponding to lunar phase and libration angles, allowing intercomparison of observations made by instruments on different spacecraft under different time and location conditions. The spacecraft maneuvers necessary to view the Moon are briefly described and results of using the lunar irradiance model in comparing the radiometric calibration scales of the six satellite instruments are presented here.

Butler, James J.↗
NASA NTRS1991

Maneuver simulations of flexible spacecraft by solving TPBVP

The optimal control of large angle rapid maneuvers and vibrations of a Shuttle mast reflector system is considered. The nonlinear equations of motion are formulated by using Lagrange's formula, with the mast modeled as a continuous beam. The nonlinear terms in the equations come from the coupling between the angular velocities, the modal coordinates, and the modal rates. Pontryagin's Maximum Principle is applied to the slewing problem, to derive the necessary conditions for the optimal controls, which are bounded by given saturation levels. The resulting two point boundary value problem (TPBVP) is then solved by using the quasilinearization algorithm and the method of particular solutions. In the numerical simulations, the structural parameters and the control limits from the Spacecraft Control Lab Experiment (SCOLE) are used. In the 2-D case, only the motion in the plane of an Earth orbit or the single axis slewing motion is discussed. In the 3-D slewing, the mast is modeled as a continuous beam subjected to 3-D deformations. The numerical results for both the linearized system and the nonlinear system are presented to compare the differences in their time response.

Bainum, Peter M.↗
NASA NTRS2001

Optimal Orbit Design for the Magnetospheric Imaging Constellation

The Magnetospheric Imaging Constellation (MagIC) is a NASA space science concept to study the Earth's Magnetosphere. The concept proposes to apply tomography techniques using an array of spacecraft to obtain three dimensional images of the Earth's magnetosphere. This paper presents an optimal orbit design to ensure that the constellation is in the desired region of the magnetosphere for maximum time. The solution is found using a steepest descent optimization algorithm that takes into account perturbations from the non-spherical Earth, drag, Sun, Moon and other significant bodies. The solution also satisfies constraints on maximum eclipse duration and geometry constraints to allow an adequate GPS navigation solution. We present three solutions depending upon the epoch of the primary science: vernal equinox, summer solstice, and a third midway between the vernal equinox and summer solstice. Orbit insertion is also considered. All spacecraft are assumed to be launched on a single vehicle into a nominal orbit and the (Delta)V's to achieve the nominal orbit are presented. After insertion into the nominal orbit, each spacecraft undergoes a phasing maneuver to place it in the appropriate position with respect to the rest of the constellation. We present a minimum fuel approach to maneuver each spacecraft from the nominal orbit into the desired final orbit.

Hughes, Steven P.↗
NASA NTRS1985

Exact spacecraft detumbling and reorientation maneuvers with gimbaled thrusters and reaction wheels

The equations of rotational motion for a spacecraft equipped with external jets and internal reaction wheels are shown to be feedback-equivalent to those of a linear system in attitude parameter space. Reorientation maneuvers are thereby formulated as linear optimal control problems with least mean square acceleration in attitude parameter space, solved in closed form and implementable either with internal or external torque commands, the choice depending on power and throttling requirements. For prior detumbling, an alternative solution with least mean square torque by angular momentum feedback is also given, that is implementable with gimbaled pairs of thrusters at constant throttle. Such a detumbling maneuver may then be followed by an acceleration-commanded rest-to-rest maneuver by means of the reaction wheels.

Dwyer, T. A. W., III↗
NASA NTRS2007

Understanding Maneuver Uncertainties during Inclination Maneuvers of the Aqua Spacecraft

During the Fall 2006 inclination campaign for the Aqua spacecraft it was discovered that there was significant uncertainty in the prediction of the semimajor axis change during a maneuver. The low atmospheric drag environment at the time of the maneuvers amplified the effects of this uncertainty leading to a potential violation of the spacecraft ground-track requirements. In order to understand the uncertainty, a Monte Carlo simulation was developed to characterize the expected semi-major axis change uncertainty given the observed behavior of the spacecraft propulsion and attitude control systems during a maneuver. This expected uncertainty was then used to develop new analysis tools to ensure that future inclination maneuver plans will .meet ground-track control requirements in the presence of the error.

McKinley, David P.↗
NASA NTRS1986

Dynamics and Control of Flexible Spacecraft During and After Slewing Maneuvers

The dynamics and control of slewing maneuvers of a large flexible spacecraft, namely, NASA Spacecraft Control Laboratory Experiment (SCOLE) test article are studied. The dynamical equations obtained for slewing maneuvers are highly nonlinear and coupled. The maneuver is expressed in terms of four Euler parameters and is specified as the angular displacement about an arbitrary axis. The slew maneuver control problem is developed in terms of rigid-body slewing and suppression of two elastic modes is analyzed using the method of nonlinear decoupling.

Kakad, Y. P.↗
NASA NTRS1987

Optimal torque control for SCOLE slewing maneuvers

The Spacecraft Control Laboratory Experiment (SCOLE) was slewed from one attitude to the required attitude and an integral performance index which involves the control torques was minimized. Kinematic and dynamical equations, optimal control, two-point boundary-value problems, and estimation of unknown boundary conditions are presented.

Bainum, P. M.↗