Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPECTRAL REFLECTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Spectral reflectance studies on the orientale region of the Moon

The Orientale impact occurred in rugged highlands on the southwestern limb of the Moon and was the last of the major basin-forming events. Valuable insight concerning lateral and vertical changes in the composition of the lunar crust can be provided by studies of material exposed by lunar impact basins. These impacts have excavated material from a variety of depths and deposited this ejecta in a systematic manner. In order to investigate the composition of materials exposed on the interior of Orientale basin, near-infrared reflectance spectra were collected for units within the Cordillera ring.

Hawke, B. R.↗
NASA NTRS1984

Spectral reflectance of carbonate minerals and rocks in the visible and near infrared (0.35 - 2.55 microns) and its applications in carbonate petrology

Reflection spectroscopy in the visible and near infrared (0.35 to 2.55 micron) offers a rapid, inexpensive, nondestructive tool for determining the mineralogy and investigating the minor element chemistry of the hard-to-discriminate carbonate minerals, and can, in one step, provide information previously obtainable only by the combined application of two or more analytical techniques. When light interacts with a mineral certain wavelengths are preferentially absorbed. The number, positions, widths and relative intensities of these absorptions are diagnostic of the mineralogy and chemical composition of the sample. At least seven bands due to vibrations of the carbonate radical occur between 1.60 and 2.55 micron. Positions of these bands vary from one carbonae mineral to another and can be used for mineral identification. Cation mass is the primary factor controlling band position; cation radius plays a secondary role.

Gaffey, S. J.↗
NASA NTRS1984

Estimation of leaf area index from bidirectional spectral reflectance data by inverting a canopy reflectance model

A technique for estimating the leaf area index from bidirectional canopy reflectance (CR) data, in the infrared region, e.g., in band 4 of a Thematic Mapper (TM), is described. It involves inversion of a CR model which accurately represents the reflectance from the canopy. A method for remotely collecting this CR data using an aircraft based TM is described. The bidirectional CR's, for a black spruce (picea mariana) canopy, for 7 solar/view directions, as measured using this technique, are given. A very preliminary analysis of the data from a point of view of estimating LAI by inversion of a CR model is given. This analysis suggests that for an acceptably accurate estimation of LAI, one will require bidirectional CR's for many more than 7 solar/view directions.

Goel, N. S.↗
NASA NTRS1983

Spectral reflectance of surface soils: Relationships with some soil properties

Using a published atlas of reflectance curves and physicochemical properties of soils, a statistical analysis was carried out. Reflectance bands which correspond to five of the wavebands used by NASA's Thematic Mapper were examined for relationships to specific soil properties. The properties considered in this study include: Sand Content, Silt Content, Clay Content, Organic Matter Content, Cation Exchange Capacity, Iron Oxide Content and Moisture Content. Regression of these seven properties on the mean values of five TM bands produced results that indicate that the predictability of the properties can be increased by stratifying the data. The data was stratified by parent material, taxonomic order, temperature zone, moisture zone and climate (combined temperature and moisture). The best results were obtained when the sample was examined by climatic classes. The middle Infra-red bands, 5 and 7, as well as the visible bands, 2 and 3, are significant in the model. The near Infra-red band, band 4, is almost as useful and should be included in any studies. General linear modeling procedures examined relationships of the seven properties with certain wavebands in the stratified samples.

Kiesewetter, C. H.↗
NASA NTRS1985

Spectral reflectance study of the Hadley-Appenine (Apollo 15) region

Twenty-three near infrared spectra were obtained from the Mauna Kea Observatory 2.2 m telescope. Results of an analysis of near infrared spectra obtained for surface units in the Hadley-Apennine region were presented. Compositional trends from the interior to exterior of the Imbrium are discussed.

Lucey, P. G.↗
NASA NTRS1987

On the spectral reflectance properties of materials exposed at the Viking landing sites

Reflectance data derived from Viking Lander multispectral data were used to characterize the types of soils and blocks exposed at the landing sites and to search for evidence of relatively unaltered igneous rocks. A comprehensive effort was mounted to examine multispectral data that combines testing of camera radiometric calibrations, explicitly removing the effects of atmospheric attenuation and skylight, and quantitatively comparing the corrected data to reflectance data from laboratory materials. Bi-directional reflectances for blue, green and red channels were determined for 31 block and soil exposures at Viking landing sites.

Guinness, E.↗
NASA NTRS1987

Solid sulfur in vacuum: Sublimation effects on surface microtexture, color and spectral reflectance, and applications to planetary surfaces

A form of sulfur that is white at room temperature and very fluffy in texture has been found in laboratory experiments on the effects of vacuum sublimation (evaporation) on solid sulfur. This work is an outgrowth of proton sputtering experiments on sulfur directed toward understanding Jovian magnetospheric effects on the surface of Io. Fluffy white sulfur is formed on the surface of solid yellow, tan, or brown sulfur melt freezes in vacuum by differential (fractional) evaporation of two or more sulfur molecular species present in the original sulfur; S(8) ring sulfur is thought to be the dominant sublimination phase lost to the vacuum sink, and polymeric chain sulfur S(u) the dominant residual phase that remains in place, forming the residual fluffy surface layer. The reflectance spectrum of the original sulfur surface is greaty modified by formation of the fluffy layer: the blue absorption band-edge and shoulder move 0.05 to 0.06 microns toward shorter wavelengths resulting in a permanent increase in reflectivity near 0.42 to 0.46 microns; the UV reflectivity below 0.40 microns is reduced. This form of sulfur should exist in large quantity on the surface of Io, especially in hotspot regions if there is solid free sulfur there that has solidified from a melt. Its color and spectra will indicate relative crystallization age on a scale of days to months and/or surface temperature distribution history.

Nash, D. B.↗
NASA NTRS1987

On the spectral reflectance properties of materials exposed at the Viking landing sites

Bidirectional reflectances for the blue, green, and red channels were determined for 31 block and soil exposures imaged by the two Viking Lander Cameras on Mars and were calibrated to within 10 percent uncertainties. The observed variations in bidirectional reflectance in the visible and relative brightness in the IR could be best explained by varying degrees of oxidation and ferric iron crystallinity, while most block surfaces had reflectances consistent with thin to optically thick covers of palagonitic material. These results are consistent with the conclusion that blocks seen at both sites are mafic rocks coated to varying thicknesses with amorphous oxidized material. The differences observed in reflectance properties for common block surfaces and common soils imply that local weathering of blocks has not contributed significantly to the soil exposed at the landing sites.

Guinness, Edward A.↗
NASA NTRS1988

Interactions of light with rough dielectric surfaces - Spectral reflectance and polarimetric properties

The nature of the interactions of visible and NIR radiation with the surfaces of rock and mineral samples was investigated by measuring the reflectance and the polarization properties of scattered and reflected light for slab samples of obsidian and fine-grained basalt, prepared to controlled surface roughness. It is shown that the degree to which radiation can penetrate a surface and then scatter back out, an essential criterion for mineralogic determinations based on reflectance spectra, depends not only upon the composition of the material, but also on its physical condition such as sample grain size and surface roughness. Comparison of the experimentally measured reflectance and polarization from smooth and rough slab materials with the predicted models indicates that single Fresnel reflections are responsible for the largest part of the reflected intensity resulting from interactions with the surfaces of dielectric materials; multiple Fresnel reflections are much less important for such surfaces.

Yon, S. A.↗
NASA NTRS1992

Directional and spectral reflectance of the Kuwait oil-fire smoke

The angular reflectance pattern of the Kuwait oil-fire smoke was measured from an aircraft at 13 discrete wavelengths between 0.5 and 2.3 microns. Measurements at 0.75 and 1.64 micron showed that the reflectance of the smoke layer was about 12 percent in the nadir direction, with considerable limb brightening toward the horizon. Furthermore, these observations revealed a backscattering maximum in the antisolar direction and an enhanced scattering near the rainbow direction. These characteristics suggest that the smoke layer 90 km downwind of the Kuwait oil fires was composed of a significant number of oil drizzle droplets that scatter solar radiation as a layer composed of spherical particles.

King, Michael D.↗
NASA NTRS1993

The state of Fe in the lunar regolith and its relationship to the spectral reflectance properties of the moon

Space weathering may have altered the surfaces of airless bodies such as asteroids and the moon, and effectively shock-darkened their surfaces, resulting in much lower reflectance and shallower absorption bands compared to those of simple, comminuted, and powdered rocks produced in the laboratory. Studies of lunar samples from the Apollo missions have led to the suggestion that these reflection properties are inherent to the fine-grained regolith which has recorded a wide variety of shock-metamorphic effects. In particular, the lunar soil (i.e., that part of the regolith with grain sizes below 1 mm) contains native Fe in quantities above those present in the rocks from which the soil was formed. The origin and nature of the native Fe in the soil is addressed, and speculations concerning its effects upon the soil's optical properties are presented. Portions of this discussion draw heavily from earlier papers by our research group.

Taylor, Lawrence A.↗
NASA NTRS1993

Spectral reflectance studies of the Humorum Basin region

A portion of the mare-bounding (MB) ring of Humorum Basin is composed of pure anorthosite while other parts of the ring are composed of noritic anorthosite. An episode of mare volcanism emplaced basaltic units in the region northwest of the MB ring after the Humorum impact event. Subsequently, large impacts emplaced a veneer of highlands material atop the basalt flows. Some mare material could have been mixed with this highlands debris either by local mixing by secondary craters or by vertical mixing. Spectra for most other highlands units in the region indicate a noritic anorthosite lithology. Spectra of mare basalts in Mare Humorum and nearby mare flooded craters show relatively deep absorption bands due to the presence of abundant high-Ca pyroxene. An analysis of spectra for a small number of craters in the highlands west of the outer ring of Humorum reveals the presence of high-Ca pyroxene. This suggests the possible presence of an extensive gabbroic province.

Peterson, C. A.↗
NASA NTRS1998

Study of the Effects of Photometric Geometry on Spectral Reflectance Measurements

The objective of this research is to investigate how the spectrophotometric properties of planetary surface materials depend on photometric geometry by refining and applying radiative transfer theory to data obtained from spacecraft and telescope observations of planetary surfaces, studies of laboratory analogs, and computer simulations. The goal is to perfect the physical interpretation of photometric parameters in the context of planetary surface geological properties and processes. The purpose of this report is to document the research achievements associated with this study.

Helfenstein, Paul↗
NASA NTRS2001

Oleoresin, Chemistry and Spectral Reflectance in "Stressed" Lodgepole and White Bark Pine, Mammoth Mountain, California

Development of methods to identify the physical and chemical character of materials on the earth's surface is one of the foci of hyperspectral remote sensing activities. Enhancing the ability to elucidate changes in foliar chemistry that relate to the health of a plant is a benefit to plant physiologists, foresters, and plant ecologists, as well as geologist and environmental scientists. Vegetation covers the landscape throughout the temperate and tropical regions of the earth. The existence of vegetation in these areas presents special problems to remote sensing systems since geologic bedrock and alteration zones are masked. At times, however, alterations in the soil/sediment geochemical environment result in foliar chemical changes that are detectable via remote sensing. Examples include monitoring of chlorophyll reflectance/fluorescence and equivalent water thickness indices as indicators of drought-induced plant stress. Another processing and interpretation approach used with hyperspectral data has been principal components analysis (PCA). Rowan et al. used PCA to identify absorption feature patterns obtained from vegetated areas with discrete bedrock geology or mineralization as the substrate. Many researchers highlight the need to advance our ability for hyperspectral imaging in vegetated areas as a near-term priority.

Hickey, James C.↗