SEARCH · Search NASA

Results for “STATIONKEEPING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1985

NASA electric propulsion technology

It is pointed out that the requirements for future electric propulsion cover an extremely large range of technical and programmatic characteristics. A NASA program is to provide options for the many potential mission applications, taking into account work on electrostatic, electromagnetic, and electrothermal propulsion systems. The present paper is concerned with developments regarding the three classes of electric propulsion. Studies concerning electrostatic propulsion are concerned with ion propulsion for primary propulsion for planetary and earth-orbit transfer vehicles, stationkeeping for geosynchronous spacecraft, and ion thruster systems. In connection with investigations related to electromagnetic propulsion, attention is given to electromagnetic launchers, the Hall current thruster, and magnetoplasmadynamic thrusters. In a discussion of electrothermal developments, space station resistojets are considered along with high performance resistojets, arcjets, and a laser thruster.

Berkopec, F. D.↗

NASA NTRS1986

A second-generation mobile satellite system

A design for a low-user-cost, 9000 channel capacity second generation mobile satellite system (Msat-2) for continental U.S., Alaska and Canada using two geostationary satellites at 90 and 130 deg west longitude, is presented. The increased capacity over the first generation system is obtained by use of a 20 m deployable antenna with an offset-fed antenna configuration, a high-power satellite bus, and by relaxing the north-south stationkeeping requirement to + or - 2 deg and the eclipse capability to 50 percent. Efficient frequency utilization is achieved for uplink and downlink spectra by a 7-frequency reuse scheme with 285 5-kHz channels per subband, and subband reuse of up to four times. Problems of interbeam interference and multipath fading contributed to the choice of a nonoverlapping feed for the Msat-2, and a proper modulation scheme using Gaussian baseband filtered minimum-shift-keying with differential detection.

Sue, M. K.↗

NASA NTRS1985

Space salvage - A report on Shuttle mission STS 51-A

The success of the Space Shuttle Orbiter and Manned Maneuvering Unit (MMU) in the rendezvous and capture of the Westar and Palapa satellites was largely attributable to the availability and fidelity of numerous simulators, which facilitated real time development and verification of satellite rescue procedures and hardware. This complex Space Shuttle mission, STS 51-A, was developed and executed in only 8 months; by contrast, the Solar Maximum repair mission was developed over a period of three years. Attention is presently given to Orbiter sensors, satellite night stationkeeping, satellite stabilization tasks, MMU tasks, and preparatory simulations.

Hauck, F. H.↗

NASA NTRS1987

Arcjet starting reliability: A multistart test on hydrogen/nitrogen mixtures

An arcjet starting reliability test was performed to investigate one feasibility issue in the use of arcjets onboard a satellite for north-south stationkeeping. A 1 kW arcjet was run on hydrogen/nitrogen gas mixtures simulating decomposed hydrazine. A pulse width modulated power supply with an integral high voltage starting pulser was used for arc ignition and steady-state operation. The test was performed in four phases in order to determine if starting characteristics changed as a result of long term thruster operation. More than 300 successful starts were accumulated over an operating time of 18 hrs. Overall results indicate that there is a link between starting characteristics and long term thruster operation; however, the large number of starts had no effect on steady-state performance.

Haag, Thomas W.↗

NASA NTRS1986

Dynamics During Thrust Maneuvers of Flexible Spinning Satellites with Axial and Radial Booms

The dynamic response to operational maneuvers of spinning symmetric spacecraft with radial and axial booms was analyzed as part of the prelaunch dynamic analysis of the ISEE-3 spacecraft placed in a halo orbit around an Earth-Sun libration point, and later renamed ICE when it was directed to fly-by comet Giacobini-Zinner. The results presented use simple spacecraft models, and frequently give predictions that are good and easily obtained when the results from using a general purpose multibody dynamics program were very time consuming to obtain. Deployment of radial booms, spin-up after partial deployment, stationkeeping, and trajectory changes are analyzed. The latter two can involve both axial thrusting and pulsed radial thrusting once per revolution.

Longman, R. W.↗

NASA NTRS1986

Heat pipe cooled rocket engines

A concept for a heat-pipe-cooled rocket engine, which involves the use of heat pipes to augment radiation cooling on small, low-flux rocket engines used for attitude control and stationkeeping on satellites, is discussed. Results of the thermal and performance analyses performed on a prototype heat cooled thrust chamber are presented, together with the results of fabrication experiments. A test plan for full-scale hot fire hardware testing is outlined.

Berkman, D. K.↗

NASA NTRS1987

Performance characterization of a low power hydrazine arcjet

Hydrazine arcjets, which offer substantial performance advantages over alternatives in geosynchronous satellite stationkeeping applications, have undergone startup, materials compatibility, lifetime, and power conditioning unit design issues. Devices in the 1000-3000 W output range have been characterized for several different electrode configurations. Constrictor length and diameter, electrode gap setting, and vortex strength have been parametrically studied in order to ascertain the influence of each on specific impulse and efficiency; specific impulse levels greater than 700 sec have been achieved.

Knowles, S. C.↗

NASA NTRS1987

Arcjet starting reliability - A multistart test on hydrogen/nitrogen mixtures

An arcjet starting reliability test was performed to investigate one feasibility issue in the use of arcjets on board a satellite for north-south stationkeeping. A 1 kW arcjet was run on hydrogen/nitrogen gas mixtures simulating decomposed hydrazine. A pulse width modulated power supply with an integral high voltage starting pulser was used for arc ignition and steady-state operation. The test was performed in four phases in order to determine if starting characteristics changed as a result of long term thruster operation. More than 300 successful starts were accumulated over an operating time of 18 hr. Overall results indicate that there is a link between starting characteristics and long term thruster operation; however, the large number of starts had no effect on steady-state performance.

Haag, Thomas W.↗

NASA NTRS1987

Status of xenon ion propulsion technology

This paper describes a working-model xenon ion propulsion subsystem (XIPS) designed for north-south stationkeeping (NSSK) of 2500-kg-class geosynchronous communication satellites. The XIPS consists of a 25-cm-diameter laboratory-model thruster, a breadboard-model power supply, and a flight-prototype pressure regulator (the critical component of the pressure-regulated xenon feed system). With a thrust of 63.5 mN, specific impulse of 2800 sec, and thruster efficiency of 65 percent, the XIPS performance is believed to be the highest ever reported for an ion thruster operated at 1.3-kW input power. The XIPS power supply accepts an input power of about 1.4 kW from a 28- to 35-V bus and converts it into the seven outputs required for startup and operation of the thruster. The simplified power supply contains only about 500 parts and has demonstrated an unprecedented efficiency of 90 percent and a specific mass of about 8 kg/kW. The results of a highly successful wear-mechanism test in which the working-model XIPS was operated for 4350 hours and 3850 ON/OFF cycles are presented. These hours and cycles are equivalent to over ten years of NSSK on large communication satellites.

Beattie, J. R.↗

NASA NTRS1988

A cyclic ground test of an ion auxiliary propulsion system: Description and operational considerations

The Ion Auxiliary Propulsion System (IAPS) experiment is designed for launch on an Air Force Space Test Program satellite (NASA-TM-78859; AIAA Paper No. 78-647). The primary objective of the experiment is to flight qualify the 8 cm mercury ion thruster system for stationkeeping applications. Secondary objectives are measuring the interactions between operating ion thruster systems and host spacecraft, and confirming the design performance of the thruster systems. Two complete 8 cm mercury ion thruster subsystems will be flown. One of these will be operated for 2557 on and off cycles and 7057 hours at full thrust. Tests are currently under way in support of the IAPS flight experiment. In this test an IAPS thruster is being operated through a series of startup/run/shut-down cycles which simulate thruster operation during the planned flight experiment. A test facility description and operational considerations of this testing using an engineering model 8 cm thruster (S/N 905) is the subject of this paper. Final results will be published at a later date when the ground test has been concluded.

Ling, Jerri S.↗

NASA NTRS1987

A high-capacity aeronautical mobile satellite system

This paper describes a conceptual system design for a satellite-based aeronautical safety communications system capable of serving both general aviation aircraft and commercial aviation aircraft in the contiguous U.S. in the mid-1990s. The space segment is described, including satellite locations and coverage, spacecraft configuration, eclipse capability and stationkeeping, transponder design, and mass and power. The spacecraft mass and power budgets are given. The air mobile terminals, ground segment, and frequency plan and channelization are discussed, and the data rate, modulation/demodulation/coding, and channel spacing are considered. The message format, frequency control, system capacity, and system sensitivity are discussed.

Sue, M. K.↗

NASA NTRS1988

All resistojet control of the NASA dual keel Space Station

This paper describes a control system that uses small (0.1-N) hydrogen-fueled, high-expansion-ratio resistojets to control a Space Station's position and attitude. The number and size of the resistojets is calculated based on requirements for stationkeeping, compensation for steady-state gravity-gradient and aerodynamic torques, momentum loading due to mobile remote manipulator motion, Shuttle Orbiter docking, and translational evasive maneuvering. The all-resistojet control system performs continuous orbit maintenance while keeping the linear accelerations on the spacecraft lower than they would be without any control system operating.

Paluszek, M. A.↗

NASA NTRS1988

Get-Away tether experiment - Experimental plans

The experimental capabilities of the Get-Away Tether Experiment (GATE) are presented and a series of demonstration mission are proposed. The GATE is a free-flying tether system that will develop or demonstrate technology in the areas of tether dynamics (deployment and stabilization, retrieval, stationkeeping, and severance), tether electrodynamics, micrometeor hazards to tethers, and disturbance rejection. The system consists of two subsatellites connected by 1 km of tether. The free-flying system is ejected from the Orbiter via a Getaway Special (GAS) canister. Two dynamics missions are profiled along with a description of electrodynamic mission capabilities. The dynamic interactions of the end body and tether may be observed from the Orbiter or from an on-board video tracking system. Hence, GATE provides a unique, low cost capability to demonstrate various tether technologies, and address critical design and safety issues associated with future tether applications. An assessment of the significant measurable parameters and associated instrumentation is given. Future work and system development projection schedules are also outlined.

Greene, Michael↗

NASA NTRS1989

Advanced onboard propulsion benefits and status

Future commercial space systems may include geosynchronous-orbit communication satellites; Earth-observing satellites in polar, sun-synchronous orbits; and tended low-earth-orbit platforms. All such space systems require onboard propulsion for a variety of functions, including stationkeeping and drag makeup, apogee motors, and delivery and return. In many cases, the onboard propulsion exerts a major influence on the overall mission performance, lifetime, and integration. NASA has established a Low Thrust Propulsion Program, which is developing chemical and electric propulsion concepts that offer potential for significant benefits for onboard propulsion for the various classes of commercial spacecraft. The onboard propulsion requirements of future commercial space systems are briefly discussed, followed by a summary of the characteristics and status of relevant elements of the NASA Low Thrust program.

Byers, David C.↗

NASA NTRS1990

Xenon ion sources for space applications

The technology of xenon ion thrusters under development for space-propulsion and plasma-contactor applications is described with particular consideration given to the 1.4-kW Xenon Ion Propulsion Subsystem (XIPS) designed for the upcoming Atmospheric Laboratory for Applications and Science Shuttle-based missions. The 25-cm-diam ion thruster of the XIPS is able to convert input power into thrust-beam power with an efficiency of over 82 percent. The XIPS will be used for satellite stationkeeping and orbit raising and maneuvering and as a plasma contactor. A 1991 flight application is described in which the 25-cm XIPS plasma contactor will be used to stabilize the electrical potential of the Shuttle Orbiter during firings of a 1.5-A electron beam from its payload bay.

Beattie, J. R.↗

NASA NTRS1990

End-hall thrusters

The end-Hall thruster can provide electric propulsion with fixed masses, specific impulses, and power-to-thrust ratios intermediate of an arcjet and a gridded (electrostatic) ion thruster. With these characteristics, this thruster is a candidate for missions of intermediate difficulty, such as the north-south stationkeeping of geostationary satellites.

Kaufman, H. R.↗

NASA NTRS1990

Advanced-technology space station study: Summary of systems and pacing technologies

The principal system features defined for the Advanced Technology Space Station are summarized and the 21 pacing technologies identified during the course of the study are described. The descriptions of system configurations were extracted from four previous study reports. The technological areas focus on those systems particular to all large spacecraft which generate artificial gravity by rotation. The summary includes a listing of the functions, crew requirements and electrical power demand that led to the studied configuration. The pacing technologies include the benefits of advanced materials, in-orbit assembly requirements, stationkeeping, evaluations of electrical power generation alternates, and life support systems. The descriptions of systems show the potential for synergies and identifies the beneficial interactions that can result from technological advances.

Butterfield, A. J.↗

NASA NTRS1990

Xenon ion propulsion for orbit transfer

For more than 30 years, NASA has conducted an ion propulsion program which has resulted in several experimental space flight demonstrations and the development of many supporting technologies. Technologies appropriate for geosynchronous stationkeeping, earth-orbit transfer missions, and interplanetary missions are defined and evaluated. The status of critical ion propulsion system elements is reviewed. Electron bombardment ion thrusters for primary propulsion have evolved to operate on xenon in the 5 to 10 kW power range. Thruster efficiencies of 0.7 and specific impulse values of 4000 s were documented. The baseline thruster currently under development by NASA LeRC includes ring-cusp magnetic field plasma containment and dished two-grid ion optics. Based on past experience and demonstrated simplifications, power processors for these thrusters should have approximately 500 parts, a mass of 40 kg, and an efficiency near 0.94. Thrust vector control, via individual thruster gimbals, is a mature technology. High pressure, gaseous xenon propellant storage and control schemes, using flight qualified hardware, result in propellant tankage fractions between 0.1 and 0.2. In-space and ground integration testing has demonstrated that ion propulsion systems can be successfully integrated with their host spacecraft. Ion propulsion system technologies are mature and can significantly enhance and/or enable a variety of missions in the nation's space propulsion program.

Rawlin, V. K.↗