Search NASA⌕ Search

SEARCH · Search NASA

Results for “STOCKPILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Reliability of Aging Polymer Components

A viscoelastic constitutive analysis is used to investigate the counter-intuitive observation of “mobility decrease with increased deformation through yield” in a glass forming polymer under compressive and tensile loading conditions. Current Sandia National Laboratory polymer models are built on the assumption that deformation enhances the mobility of the material. If this assumption is not true at small strain rates (e.g., thermal fluctuations in stockpile storage) then models will not be able to accurately predict stress evolution and potential failure of components during stockpile storage. The behavior of an epoxy thermoset is explored using an extensively validated material “clock” model, the Simplified Potential Energy Clock (SPEC) model. This methodology allows for a comparison between the linear viscoelastic (LVE) limit and the true non-linear viscoelastic (NLVE) representation and enables exploration of a wide range of conditions that are not practical to explore experimentally. The model predicts the behavior described as “mobility decrease with increased deformation” in the LVE limit and at low strain rates for NLVE. Only when loading rates are sufficient to decrease the material shift factor by multiple orders of magnitude is the anticipated deformation induced mobility or “mobility increase with increased deformation” observed. While the model has not been “trained” for these behaviors, it also predicts that the normalized stress relaxation response is indistinguishable amongst strain levels in the “post-yield” region as has been experimentally reported. At long time, which has not been examined experimentally, the model predicts the normalized relaxation curves “crossover” and return to the LVE ordering. These findings further demonstrate the ability of rheologically simple models to represent experimentally measured material response and present predictions at long time scales that could be tested experimentally.

42 ENGINEERING↗

Preliminary IHE Qualification of a PATO/Viton-A Formulation: Shock-to-Detonation Experiments

All nuclear weapons in the stockpile require high explosive (HE) components to function. These explosives create safety hazards during storage, handling, and stockpile maintenance operations, where unintentional initiation can cause serious injuries, death, or significant damage to facilities and the environment. To mitigate these risks, the explosive formulation(s) used in these components should be as resistant to accidental initiation as possible. Mass-detonable explosives that are “so insensitive that the probability of accidental initiation or transition from burning to detonation is negligible” are defined by Chapter IX of the DOE Explosive Safety Standard as insensitive high explosives (IHE). The IHE in most common use in the DOE is currently PBX 9502 (95%wt TATB, 5%wt Kel-F800). The Los Alamos and Lawrence Livermore National Laboratories have established a series of experiments used to classify new HE formulations as either conventional HE (CHE) or IHE. This report describes three sets of gas gun experiments on a new candidate IHE formulation consisting of 95.5%wt 3-Picrylamino-1,2,4-Triazole (PATO) and 4.5%wt Viton-A. These experiments provide a preliminary evaluation of the performance of this material on the shock-to-detonation (SDT) portion of this qualification standard.

3-Picrylamino-1,2,4-Triazole↗

Nucleosynthesis for Science and Security: Preparing for a Nuclear and Chemical Sciences Program at FRIB

Nuclear reactions are vital to nuclear science and its many applications: they are the mechanism for forging elements in the cosmos, the source of energy for both stars and nuclear weapons, the principal probes used to study nuclear properties, and the primary diagnostic signatures for stockpile stewardship and nuclear forensics. Yet, most reaction experiments have been confined to the small fraction of all nuclei that are stable, and a theoretical foundation for reactions with a true predictive capability is lacking. The Facility for Rare Isotope Beams (FRIB), the flagship U.S. facility in low-energy nuclear science, will offer the opportunity to rectify the long-standing gap in understanding reactions on radioactive nuclei. The work performed in this LDRD project brought together the experimental nuclear physics, radiochemistry, nuclear theory, and high-performance computing expertise of the Nuclear and Chemical Sciences Division to develop new techniques that will be needed to exploit FRIB beams to better understand nuclear reactions. Novel isotope-harvesting techniques were developed to demonstrate that samples could be collected at the National Superconducting Cyclotron Laboratory (NSCL) at Michigan State University (the facility which FRIB builds upon) for direct measurements of long-lived radioisotopes. For isotopes too short lived for direct measurements, indirect approaches were developed that would ultimately be used with high-intensity FRIB radioactive beams. Finally, to better interpret experimental results and reliably extend predictions beyond the available data, a foundation was established for a fully microscopic and unified description of the structure, interactions, and dynamics of two reacting nuclei that moves beyond empirical models. This work has positioned the team for a leadership role at FRIB, enabling LLNL to maintain a world-class nuclear science program and to compete for future talent and funding, both of which are vital for continuing support of the laboratory’s stockpile stewardship mission.

42 ENGINEERING↗

LANSCE 21st Century Deterrence

The LANSCE accelerator is an important tool in the assessment and certification of the nation’s nuclear stockpile. LANSCE provides critical materials and nuclear data needed to develop a predictive capability for the performance of nuclear weapons. As the stockpile ages, materials are replaced, and manufacturing processes change, it is critical that we understand how these changes impact device performance. Dynamic proton radiography and neutron diffraction are ideally suited to contribute to this need. These capabilities are essential to enabling the NNSA labs to become more responsive and agile in advancing the deterrent of the future.

43 PARTICLE ACCELERATORS↗

NNSA GenScen 2.1 Methodology

Nuclear weapons stockpile planning is a complex process. The Non-Proliferation Treaty,' New START Treaty,2 DOE/NNSA, STRATCOM, Navy, Air Force, and Executive-Branch all have objectives that drive requirements for the types and quantities of nuclear weapons, which in turn drive how nuclear weapons are designed, manufactured, tested, maintained, deployed, transported, stored, retired, and ultimately dismantled. An estimated 200 distinct individuals contribute to the development, completion, and approval of this plan. And once that plan is completed, herein called the N NSA Program of Record (POR), ensuring that the plan is feasible — that the stockpile work can get done — ensures that the Nuclear Security Enterprise (NSE) can deliver the intended nuclear force posture.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

The Annual Assessment Reporting Process

On 11 August 1995, President Clinton announced that the United States intended to enter negotiations on the Comprehensive Test Ban Treaty. To address concerns that the cessation of nuclear testing would introduce uncertainty about the efficacy of the U.S. nuclear deterrent, he also announced the concurrent establishment of six Safeguards as conditions of entry. Safeguard A prescribed “. . . a Science Based Stockpile Stewardship program to ensure a high level of confidence in the safety and reliability of nuclear weapons in the active stockpile.” Safeguard B required “The maintenance of modern nuclear laboratory facilities and programs in theoretical and exploratory nuclear technology which will attract, retain, and ensure . . . human scientific resources.” These two Safeguards led to the establishment of the physical and intellectual capabilities to sustain the Nation’s nuclear deterrent without nuclear testing.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Integrated Initiative for Plutonium and Actinide Missions

Recognizing the dynamic environment and challenges facing the plutonium and actinide missions at Los Alamos National Laboratory over the next decade, Laboratory leadership established Fiscal Year (FY) 2020 Laboratory Agenda Item 2.6. This agenda item calls for the development and implementation of an integrated initiative for plutonium and actinide missions at Los Alamos. Over the next decade, Los Alamos has been asked to significantly ramp up pit production to help address nuclear stockpile and nuclear deterrence needs, heat source production to support expansion in space exploration, evaluation of stockpile returns, processing operations in support of nonproliferation, and the actinide science to support all of these efforts. All of this must be accomplished while significantly increasing the size of our plutonium and actinide missions workforce and modernizing and updating critical infrastructure. Only through enhanced integration of science, technology, and engineering (ST&E), manufacturing, and mission operations will we enable achievement of these critical missions. An overall summary of the plutonium and actinide missions is included in Figure 1 on Page 3 and Figure 2 on Page 4 summarizes our goals, objectives, FY 2021 recommended actions and internal strategic priorities that are key elements of our integrated initiative.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Systems Engineering Approach for Design and Implementation of a Gas Breech for Actinide Experiments at the JASPER Facility

The Joint Actinide Shock Physics Experimental Research (JASPER) Facility is located approximately 65 miles north of Las Vegas, Nevada at the Nevada National Security Site (NNSS). The primary mission is to conduct shock physics research on actinide materials in support of NNSA’s Stockpile Stewardship Program. JASPER experiment uses a two-stage light gas gun to accelerate projectiles into targets at velocities up to 8 km/s (17,000 mph). The first stage uses an ignited propellent to drive a piston to compress gas in the pump tube. At the second stage, the gas compression exceeds a specified pressure and a rupture valve at the end of the pump tube opens. This launches a projectile to impact the target. The target is housed inside the target assembly and the debris field is contained inside the primary target chamber (PTC). The PTC is placed inside the secondary confinement chamber (SCC) as an added protection against possible contamination. These major components are illustrated in Figure 1.JASPER is capable of generating and measuring data on the properties of radioactive chemical elements at high shock pressures, temperatures, and strain rates approximating the conditions in nuclear weapons by using a two-stage gas gun. The data is used to determine material equations-of-state and validate computer models of material response. The work advances predictive capability, thus ensuring confidence in the nuclear stockpile.

42 ENGINEERING↗

Aging and Lifetimes Milestone 7777, G.C. #4: Assess the ability of MRI to identify chemical and mechanical heterogeneity in polymers at various length scales

Polysiloxane foams utilized for stockpile applications experience changes over time induced by exposure to thermal, radiative, and mechanical stresses. The interplay of these stresses can lead to chemical and/or physical changes in the polymer, such as compression set and material degradation over time. Understanding the mechanisms of material aging and identifying material degradation prior to failure are critical in maintaining the integrity of the nuclear stockpile. Our prior work using solid-state NMR spectroscopy has shown that we can observe signatures of thermal, radiative, and mechanical aging of silicone elastomers using differences in NMR parameters such as relaxation (T1 and T2). However, most of our measurements have been on bulk samples and have only provided an average aging behavior of each sample. Here, we have used magnetic resonance imaging (MRI) to provide relaxation-weighted images that are a metric of structural heterogeneity (cross-link density) in polymers across multiple length scales. In addition, the larger sample size that can be accommodated in animal MRI scanners has the potential to make the technique adaptable to detecting heterogeneities whole parts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Introduction to Los Alamos National Laboratory [Slides]

The Weapon Systems Engineering Division (W) provides the system engineering and program management necessary to sustain the safety, reliability, and security of the Los Alamos National Laboratory’s assets in the active United States nuclear stockpile - the B61, W76, W78 and W88. The Division generates key certification data for Annual Assessment supporting the Laboratory Director's letter to the President on the health of those warheads. This role demands ongoing surveillance of the active stockpile and evaluation of the potential impact of any issues through design, engineering, fabrication, testing using state-of-the-art computational simulation tools and engineering test facilities. The Division works in close liaison with the several production facilities across the nuclear security complex as well as with the customers in the US Navy and Air Force.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

LANL Weapons Physics Directorate: Mission Scope and Opportunities [Slides]

The Weapons Physics Directorate stewards a number of critical capabilities to meet the LANL mission. To execute our mission, ALDX develops and applies cutting-edge theory, computational models and multi-physics simulation codes, and designs, executes, and analyzes complex experiments. Our mission is to sustain the current stockpile, provide future stockpile options, and help shape a globalized nuclear world.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Oppenheimer Science and Energy Leadership Program (OSELP) Simulation and Computation at LANL [Slides]

Simulation and Computation plays a pivotal role in maintaining confidence in the stockpile as the approach to underwrite that confidence has changed. The need for resolution and fidelity at scale drives our need for increased computing capability. DOE/NNSA Advanced Simulation and Computing (ASC) program provides the computational surrogate for testing. ASC provides simulation-based confidence in the U.S. stockpile.

97 MATHEMATICS AND COMPUTING↗

LANL Tritium Supply and Demand Model

The LANL Tritium Supply and Demand Model provides the capability to investigate the adequacy of future tritium supply subject to stockpile demand for variousscenarios. The tool includes the ability to change stockpile demand factors and adjust tritium production plans, while accounting for Tritium decay. The model has been used numerous times to identify potential tritium shortfalls and advocate for changes to tritium production planning and implementation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

LLNL FY22 Aging and Lifetimes Exit Criteria: Milestone 8119, GC#01

Polysiloxane foams utilized for stockpile applications experience changes over time induced by exposure to thermal, radiative, and mechanical stresses. The interplay of these stresses can lead to chemical and/or physical changes in the polymer, such as compression set and material degradation over time. Understanding the mechanisms of material aging and identifying material degradation prior to failure are critical in maintaining the integrity of the nuclear stockpile. Our prior work using solid-state NMR spectroscopy has shown that we can observe signatures of thermal, radiative, and mechanical aging of silicone elastomers using differences in NMR parameters such as relaxation (T1 and T2). However, most of our measurements have been on bulk samples and have only provided an average aging behavior of each sample. Here, we have used magnetic resonance imaging (MRI) to provide relaxation-weighted images that are a metric of structural heterogeneity (crosslink density) in polymers across multiple length scales. In addition, the larger sample size that can be accommodated in animal MRI scanners has the potential to make the technique adaptable to detecting heterogeneities in whole parts.

36 MATERIALS SCIENCE↗

Los Alamos National Laboratory High Performance Computing Overview [Slides]

We need such big computers because without testing, we don't understand the health of the AGING stockpile. Our big computers store a wealth of test data. We model weapons as they were tested and see if we can match the results to validate models, and we then use validated models along with dismantlement information on aging to certify the stockpile. Sometimes the results of tests can’t be explained well, so even that part requires massive computations, but applying the model to future use is an astonishing amount of computing.

97 MATHEMATICS AND COMPUTING↗

The Dual-Axis Radiographic Hydrodynamic Test Facility Capability eXpansion (DCX) Strategy

The Dual-Axis Radiographic Hydrodynamic Test (DARHT) facility is a vital and important part of the Nation’s nuclear security enterprise. The Department of Energy/National Nuclear Security Administration (DOE/ NNSA) Stockpile Stewardship Management Plan (SSMP) identifies DARHT as a weapons mission critical facility along with the need to modernize DARHT to support weapons modernization efforts. With more than two decades of operations, DARHT has a storied history. Conceived in the 1970s, constructed in the 1990s, and operational since 2000, DARHT has advanced from open-air hydrodynamic experiments (hydros) to foam-confined hydros, to vessel-confined hydros, and in 2022, the 75 th hydro was successfully completed. Radiography has advanced from a single-axis, single-pulse system to a dual-axis, multi-pulse capability to variable fields of view (VFV) on both accelerators. The culmination of these experiences, accomplishments, and advancements has brought us to a very important question: What do the next two decades at DARHT look like? The world is not the same place it was in the 1990s when construction at DARHT was in progress. Evolving threats, an expanding mission, and technology changes necessitate adaptation. The 2018 Nuclear Posture Review (NPR) states that the nuclear weapons infrastructure has suffered the effects of age and underfunding with no margin for further delay in recapitalizing the physical infrastructure. To adapt, the aging facility, accelerators, vessels, and detector systems require improvements to ensure DARHT remains the Nation’s hydrodynamic data foundation for stockpile certification, safety, surety, and global security threats.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Nuclear Weapons Theater Experience_V1

The theater experience is driven by the big message of nuclear deterrence through successful stockpile stewardship. This job enables other national and global security work with roots going back to the capabilities developed during the Manhattan Project and honed through the history of this successor scientific laboratory. The story that unfolds uses a narrative (traditional film-type approach), although the theater setup would offer immersion and decision-making (audience participation). The idea is to demonstrate how and why the Laboratory continues its mission in maintaining the nation’s stockpile while concurrently enabling the ever-evolving multi-disciplinary science and technology innovations developed for that purpose to take other scientists along vibrant paths.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗