SEARCH · Search NASA

Results for “SWEEP FREQUENCY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1988

The effects of excitation waveforms and shaker moving mass on the measured modal characteristics of a 2- by 5-foot aluminum plate

Ground vibration tests were conducted to compare and to investigate the effects of five excitation waveforms and the shaker moving mass (equipment and armature used to attach the shaker to the structure) on the experimental modal characteristics of a 2- by 5-ft aluminum plate using fast Fourier transform techniques. The five types of excitation waveforms studied were sine dwell, random, impact, sine sweep, and impulsive sine. The results showed that the experimental modal frequencies for all types of excitation were within 3 percent, while the modal damping data exhibited greater scatter. The sets of mode shapes obtained by the five types of excitation were consistent. The results of the shaker moving mass investigation on the 2- by 5-ft aluminum plate showed that modal frequency decreases and modal damping remains relatively constant with an increase in shaker moving mass. The generalized mass of the structure appears to decrease with an increase in shaker moving mass. In addition, it was seen that having a shaker near a node line can reduce some of the effects of the added shaker moving mass on the frequencies and the damping.

Voracek, David F.↗

NASA NTRS1992

Acoustophoresis method and apparatus

A method and apparatus are provided for acoustophoresis, i.e., the separation of species via acoustic waves. An ultrasonic transducer applies an acoustic wave to one end of a sample container containing at least two species having different acoustic absorptions. The wave has a frequency tuned to or harmonized with the point of resonance of the species to be separated. This wave caused the species to be driven to an opposite end of the sample container for removal. A second ultrasonic transducer may be provided to apply a second, oppositely directed acoustic wave to prevent undesired streaming. In addition, a radio frequency tuned to the mechanical resonance and coupled with a magnetic field can serve to identify a species in a medium comprising species with similar absorption coefficients, whereby an acoustic wave having a frequency corresponding to this gyrational rate can then be applied to sweep the identified species to one end of the container for removal.

Heyman, Joseph S.↗

NASA NTRS1993

Acoustophoresis separation method

A method and apparatus are provided for acoustophoresis, i.e., the separation of species via acoustic waves. An ultrasonic transducer applies an acoustic wave to one end of a sample container containing at least two species having different acoustic absorptions. The wave has a frequency tuned to or harmonized with the point of resonance of the species to be separated. This wave causes the species to be driven to an opposite end of the sample container for removal. A second ultrasonic transducer may be provided to apply a second, oppositely directed acoustic wave to prevent undesired streaming. In addition, a radio frequency tuned to the mechanical resonance and coupled with a magnetic field can serve to identify a species in a medium comprising species with similar absorption coefficients, whereby an acoustic wave having a frequency corresponding to this gyrational rate can then be applied to sweep the identified species to one end of the container for removal.

Heyman, Joseph S.↗

NASA NTRS1988

Parametric studies of advanced turboprops

The effects of geometric variables (sweep and twist) on the structural performance of advanced turboprops are investigated. The investigation is limited to aerodynamically efficient turboprops using an acceptable design configuration as a baseline. The baseline configuration is modified using a seven by seven array of independently varying sweep and twist parameters while maintaining acceptable aerodynamic efficiency. The turboprop structural performance is evaluated in terms of critical speeds, tip displacements, and vibration frequencies where geometric nonlinearities are included. The results obtained are presented in such a manner as to highlight the effects of sweep and twist on the structural performance of aerodynamically efficient turboprop configurations.

Fertis, D. G.↗

NASA NTRS1988

Parametric studies of advanced turboprops

Maser, J. G.↗

NASA NTRS1981

Compressible boundary-layer stability calculations for sweptback wings with suction

The stability of the laminar boundary layers on two transonic wings of infinite span with distributed suction is investigated with the compressible, parallel-flow stability theory. Both wings have supercritical airfoil sections; one has a sweep angle of 23 deg, the other of 35 deg. Zero-frequency disturbances are used to represent cross-flow instability, and disturbances with the wavenumber vector aligned with the local flow direction represent traveling-wave instability. In both cases, the maximum spatial amplification rate is used as a measure of the instability. For the suction, distributions with constant mass flux downstream of the starting point are used. The main objective is to determine how the maximum amplification rate varies with the magnitude and starting point of the suction. It is found for both types of disturbances that the maximum amplification rate varies almost linearly with the suction magnitude up to at least the point where the amplification rate is halved. Different starting locations for the suction in the first 4% of the chord were found to affect cross-flow instability, but to have little influence on traveling-wave instability.

Mack, L. M.↗

NASA NTRS1993

Blocked impurity band detectors applied to tunable diode laser spectroscopy in the 8- to 28-micron range

A novel tunable diode laser spectrometer operating at 8-28 microns is described. A blocked impurity band Si:As chip is employed as detector. This device operates in this wavelength range with high detectivity and adequate frequency response for the high-sensitivity techniques used. A combination of sweep averaging and second-harmonic detection at 22 kHz yielded signal-to-noise ratios of 1200 at wavelengths above 20 microns. The sensitivity and spectral resolution achieved are an order of magnitude better than those of Fourier instruments in this range, with an improvement in instrument time response of about 3000. Several molecular bands of CO2 and N2O are observed for what is, to our knowledge, the first time with this instrument. Examples of spectral line measurements are presented.

Sirota, J. M.↗

NASA NTRS2021

Comparison of Type 2 versus Type 3 Carrier Tracking Loops under High Dynamic Signal Conditions

Virtually all deep-space missions today and in the past employed Type 2 tracking loops in their spacecraft receivers. This was acceptable since the uplink from a single ground antenna makes use of very accurate trajectory information where the radiated frequency is Doppler compensated. However, in the desire to conserve ground resources, the technique of Multiple Uplinks per Antenna (MUPA) is being considered when using a single ground antenna to uplink to a constellation of spacecraft within its beam. This single frequency technique requires the use of non-standard signal acquisition techniques since the constellation may realize different orbits and trajectories around a planetary body leading to varying Doppler offsets and dynamics at each member spacecraft. In such a case, a Type 2 tracking loop may not suffice. An earlier study discussed the various methods for acquiring signals in spacecraft receivers with uncompensated Doppler at the uplink station. In the earlier study, three methods of achieving acquisition and lock were discussed for signals with large Doppler frequency offsets as well as high dynamics; 1) a step-and-sweep signal search algorithm, 2) an FFT signal search algorithm, and, 3) on-board tuning of the signal using uploaded trajectory information or lookup tables. On-board tuning appeared a feasible solution given the trend towards utilizing software-defined radios (SDRs). In the absence of on-board tuning, a search algorithm (e.g., step-and-sweep or FFT) could be utilized in the SDR. One such consideration is in the design of the tracking loop filter, where a Type 3 loop may be more amenable to handling large uncompensated Doppler effects. This report presents an analysis of comparing performance of Type 2 versus Type 3 carrier tracking loops when acquiring and tracking signals with large Doppler dynamics.

Abraham, Douglas↗

NASA NTRSDate not supplied

Transonic Limit Cycle Oscillations of the Benchmark Supercritical Wing

This paper considers transonic flutter mechanisms of the Benchmark Supercritical Wing, a model under study in the Aeroelastic Prediction Workshop series. Flutter boundaries are mapped out across an angle of attack sweep at Mach 0.8, utilizing both time-domain and linearized frequency-domain solvers, manual meshes and adapted meshes, and various governing equations. With increased angle of attack, linearized and finite amplitude flutter predictions exhibit differences above 3◦ as the flow begins to separate; the latter predictions are found to be driven by subcritical limit cycle oscillations whose strength increases with angle of attack. Moderate perturbation values provide a stability boundary at 5◦ which matches the experimental data, but it is not clear how the experimental perturbation, from one test condition to the next, can be reasonably characterized.

Bret Stanford↗

NASA NTRS1976

Some experience using subcritical response methods in wind-tunnel flutter model studies

Experiences obtained with four methods of predicting flutter of wind-tunnel models from subcritical response data are described. The four methods are: co/quad, randomdec, power spectra density, and the peak-hold spectrum. Model excitation techniques included both forced (sinusoidal sweep) and random (tunnel turbulence). These methods were successfully used to measure the frequency and damping (or an inverse response amplitude proportional to the damping) in the predominant flutter modes. Implementation and application of each method are discussed. Some results and comparisons between methods are presented.

Foughner, J. T., Jr.↗

NASA NTRS1993

Control of unsteady shock-induced turbulent boundary layer separation upstream of blunt fins

Fluctuating wall pressure measurements have been made on centerline upstream of blunt fins in a Mach 5 turbulent boundary layer. Standard time series analysis and conditional sampling algorithms have been used to examine the effects of leading edge sweepback, leading edge shape, and fin root modifications on the fluctuating pressures. Leading edge sweep considerably reduces the mean and rms pressure loading at the fin root, the extent of the region of unsteady separation shock motion, and the separation length. The frequency of pressure fluctuations in the intermittent region increases with leading edge sweepback, while the spectral content of pressure fluctuations in the separated region is virtually unchanged by leading edge sweep. A swept hemicylindrically blunted root fillet reduces the centerline upstream influence and intermittent region length by 50 percent, and reduces the mean and rms pressure loading at the fin root by about 75 percent and 95 percent respectively. Experiments using hemicylindrical, wedge shaped and flat leading edges show that while separated flow scales increase with increasing 'bluntness', intermittent region length and root loading decrease, and separation shock frequency increases.

Kleifges, K.↗

NASA NTRS1987

Ground and air resonance of bearingless rotors in hover

A finite element formulation is used to investigate ground and air resistence in hover for a bearingless rotor. Aerodynamic forces are studied using quasi-steady strip theory, and unsteady aerodynamic effects are introduced through an inflow dynamics model. Reasonable correlation was found between predicted ground and air resonance results and data obtained from measurements using a 1/8th Froude-scaled dynamic model. Systematic parametric studies of the effects of various design parameters were performed, and lag frequency was found to significantly influence ground resonance stability, whereas pitch-lag coupling, blade sweep and pitch link stiffness had powerful effects on air resonance stability.

Jang, Jinseok↗

NASA NTRS1992

Numerical solutions for unsteady subsonic vortical flows around loaded cascades

A frequency domain linearized unsteady aerodynamic analysis is presented for three-dimensional unsteady vortical flows around a cascade of loaded airfoils. The analysis fully accounts for the distortion of the impinging vortical disturbances by the mean flow. The entire unsteady flow field is calculated in response to upstream three-dimensional harmonic disturbances. Numerical results are presented for two standard cascade configurations representing turbine and compressor bladings for a reduced frequency range from 0.1 to 5. Results show that the upstream gust conditions and blade sweep strongly affect the unsteady blade response.

Fang, J.↗

NASA NTRS1978

Use of a priori statistics to minimize acquisition time for RFI immune spread spectrum systems

The optimum acquisition sweep strategy was determined for a PN code despreader when the a priori probability density function was not uniform. A psuedo noise spread spectrum system was considered which could be utilized in the DSN to combat radio frequency interference. In a sample case, when the a priori probability density function was Gaussian, the acquisition time was reduced by about 41% compared to a uniform sweep approach.

Holmes, J. K.↗

NASA NTRS2008

Structural Dynamic Analysis of a Spacecraft Multi-DOF Shaker Table

Finite element enforced response analysis was performed on a multiple degree of freedom expander head shaker table to aid in the design of the table structure and vibration control system. The payload for this shaker system is a spacecraft with a multitude of flexible modes across a broad frequency band. A Craig-Bampton representation of the spacecraft was used to expedite analysis of multiple shaker table designs. The analysis examines the required forces in the actuators for a constant amplitude base acceleration sine sweep test, the resulting forces in the spacecraft and table attachment restraints, and the resulting accelerations on the spacecraft structure. The results show the spacecraft response at low frequencies is very high near the tip due to the low order spacecraft bending and axial modes. The high response can be addressed by notching the input vibration levels to avoid overtesting the spacecraft. At frequencies above 25 Hz, the spacecraft modal effective masses are very small, and the response of the shaker table dominates the response. Anti-resonances of the shaker table in the frequency range of interest reduce the acceleration output and require much higher actuator forces to achieve the acceleration specification. These effects may require stiffening the shaker structure to move the modes out of the test frequency range or increasing the shaker table damping.

Pray, Carl↗

NASA NTRS2016

Simulation of Sweep-Jet Flow Control, Single Jet and Full Vertical Tail

This work is a simulation technology demonstrator, of sweep jets used to suppress boundary layer separation and increase maximum achievable load coefficients. A sweep jet is a discrete Coanda jet that oscillates in the plane parallel to an aerodynamic surface. It injects mass and momentum in the approximate stream wise direction. It also generate turbulent eddies at the oscillation frequency, which are typically large relative to boundary layer turbulence, and which augmenting mixing across the boundary layer to attack flow separation. Simulations of a fluidic oscillator, the sweep jet emerging from the oscillator, and the suppression of boundary layer separation by an array of sweep jets are performed. Simulation results are compared to data from a dedicated CFD validation experiment of a single oscillator and its sweep jet, and from a study of a full-scale Boeing 757 vertical tail augmented with an array of sweep jets.2, 20 A critical step in the work is the development of realistic time-dependent sweep-jet in flow boundary conditions, derived from the results of the single-oscillator simulations, which create the sweep jets in the full-tail simulations. Simulations were performed using the Over flow CFD solver, with high-order spatial discretization and a range of turbulence modeling. Good results were obtained for all flows simulated, when suitable turbulence modeling was used.

flow control↗

NASA NTRS1972

An experimental investigation of the power spectrum of phase modulation induced on a satellite radio signal by the ionosphere

The power spectrum of phase modulation imposed upon satellite radio signals by the inhomogeneous F-region of the ionosphere (100 - 500 km) was studied. Tapes of the S-66 Beacon B Satellite recorded during the period 1964 - 1966 were processed to yield or record the frequency of modulation induced on the signals by ionospheric dispersion. This modulation is produced from the sweeping across the receiving station as the satellite transits of the two dimensional spatial phase pattern are produced on the ground. From this a power spectrum of structure sizes comprising the diffracting mechanism was determined using digital techniques. Fresnel oscillations were observed and analyzed along with some comments on the statistical stationarity of the shape of the power spectrum observed.

Moser, D. T.↗

NASA NTRS1984

Measured and calculated inplane stability characteristics for an advanced bearingless main rotor

A program of experimental and analytical research has been performed to demonstrate the effects of rotor and fuselage design parameters on rotor in-plane stability, including aeromechanical stability. The experimental data were obtained from hover and wind-tunnel tests of a scaled advanced bearingless main rotor model. Both isolated-rotor and free-hub conditions were tested. Test parameters included blade built-in cone and sweep angles; rotor inplane structural stiffness and damping; pitch link stiffness and location; and fuselage natural frequency, damping, and inertia. The results show that rotor blade structural damping is one of the most influential design parameters in obtaining acceptable aeromechanical stability margins. Other parameters, such as blade cone angle, pitch link location (rotor delta 3) and anisotropic hub damper configurations, may be used to improve stability margins, but their individual effects are subtle.

Weller, W. H.↗