SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A computer program for determining the theoretical performance of a three dimensional inlet is presented. An analysis for determining the capture area, ram force, spillage force, and surface pressure force is presented, along with the necessary computer program. A sample calculation is also included.
An analysis of the fully-coupled viscous, radiating flow past an ablating blunt body at hyperbolic entry conditions is presented. A detailed thermodynamics computation, as well as a realistic radiation transport model, is included. A locally nonsimilar approach is employed to solve the conservation equations away from the stagnation point. The validity of the locally nonsimilar approach is demonstrated for some nonablating cases. Sample calculations are made for the typical flight condition of a Jovian entry probe. The effects of the downstream injection of the ablation products of a carbon heat shield on the flux distribution around the body are discussed in detail. It is found that most of the radiative energy is absorbed by the injected carbon gas and dumped into the wake.
An empirical model for energetic solar proton fluxes is presented. With this model, the effects of such protons on geocentric space missions, to be flown during the next solar active period (1966-1983) and with orbits involving partial magnetospheric shielding, may be estimated. A synoptic background review is given, followed by a detailed discussion of the model's analytic development. Also given are comments on the model's use, errors, uncertainties, and limitations, including sample calculations which demonstrate the application of specific or general project missions. Finally, for circular trajectories, percentage exposure maps are presented, depicting fractional mission times spent outside particular L-shells as functions of orbit altitude and inclination.
A method is presented for estimating the noise generated by deflection of the engine exhaust for under-the-wing and over-the-wing versions of an externally blown flap configuration for powered lift. Correlation equations and curves are given for the overall sound pressure level and directivity and for spectra scaled to a high bypass 25,000-pound thrust size engine. Data are taken from TF34 engine tests and from large cold flow model tests. The correlations are empirical, and thus application of this prediction procedure is limited to geometrically similar configurations. Application of the method is illustrated by calculated sample footprints.
The relationships between performance, safety, cost, and schedule parameters were identified and quantified in support of an overall effort to generate program models and methodology that provide insight into a total space vehicle program. A specific space vehicle system, the attitude control system (ACS), was used, and a modeling methodology was selected that develops a consistent set of quantitative relationships among performance, safety, cost, and schedule, based on the characteristics of the components utilized in candidate mechanisms. These descriptive equations were developed for a three-axis, earth-pointing, mass expulsion ACS. A data base describing typical candidate ACS components was implemented, along with a computer program to perform sample calculations. This approach, implemented on a computer, is capable of determining the effect of a change in functional requirements to the ACS mechanization and the resulting cost and schedule. By a simple extension of this modeling methodology to the other systems in a space vehicle, a complete space vehicle model can be developed. Study results and recommendations are presented.
A new finite element is described for performing detailed thermal stress analysis of thin orthotropic shells of revolution. The element provides for temperature loadings which may vary over the surface of the shell as well as through the thickness. In a number of sample calculations, results from the present method are compared with analytical solutions as well as with independent numerical analyses. Such calculations are carried out for two cylinders, a conical frustum, a truncated hemisphere, and an annular plate. Generally, the agreement between the present solution and the other solutions is excellent.
A study was made regarding the beading and spiking phenomena observed in the M551 metals melting experiment conducted during the Skylab I mission in June 1973. An analysis was made of the beading phenomenon based on the Karman vortex shedding theory. The results tend to support the hypothesis that beading which occurred in the stainless and tantalum samples was a Karman vortex street formation. A dynamic model of cavity oscillation is discussed to explain the spiking phenomenon which was observed in the stainless steel and tantalum samples. Calculations of spiking frequency indicate that the intensity of spiking depends primarily on the vapor pressure and surface tension properties of the material, and is only slightly affected by the level of gravitation acceleration.
A method is presented for estimating the noise generated by deflection of the engine exhaust for under-the-wing and over-the-wing versions of an externally blown flap configuration for powered lift. Correlation equations and curves are given for the OASPL and directivity and for spectra scaled to a high bypass 25,000-pound thrust size engine. Data are taken from TF34 engine tests and from large cold flow model tests. The correlations are empirical, and thus application of this prediction procedure is limited to geometrically similar configurations. Application of the method is illustrated by calculated sample footprints.
A computer program for spectral synthesis has been developed, based on a list of data for atomic lines described by Kurucz, Peytremann, and Avrett (1973). To demonstrate the usefulness of this program, we present a sample calculation of the region around the C IV resonance doublet at 155 nm, which is a feature in rocket and satellite spectra of B stars. The calculation indicates that the observed feature is a blend of many lines in addition to C IV, so that detailed calculations are necessary for the correct interpretation of the observational data.
An empirical model for energetic solar proton fluxes is presented. With this model the effects of such protons on geocentric space missions, to be flown during the next solar active period (1977-1983), and with orbits involving partial magnetospheric shielding, may be estimated. A synoptic background review is given, followed by a detailed discussion of the model's use, errors, uncertainties, and limitations, including sample calculations which demonstrate the application of specific or general project missions. Finally, for circular trajectories, percentage exposure maps are presented, depicting fractional mission times spent outside particular L shells as functions of orbit altitude and inclination.
A complete numerical solution is obtained for plane wave propagation in a variable-area duct which carries a mean compressible flow. The equation solved is a matrix formulation of the equations first derived by Tsien in 1952. Sample calculations are presented for four particular flow configurations: (1) a duct-nozzle-duct combination with the acoustic wave traveling with the flow, (2) a duct-nozzle-duct combination with the acoustic wave traveling against the flow, (3) an inlet-nozzle-duct configuration with the acoustic wave traveling against the flow, and (4) a duct-nozzle-exit configuration with the acoustic wave traveling with the flow. For each of these cases, the variation of energy flux with frequency is shown for particular geometry and flow condition.
The solid state vector magnetometer sensor system is presented for the accuracy and reliability of existing systems, and for providing independent measures of attitude. Since a large number of aircraft heading reference systems depend on measurement of the earth's magnetic field, it can be shown that by substituting a 3-axis magnetometer for the remote sensing unit, both heading and attitude measurement functions can be derived using common elements. Sample calculations are made using the earth's magnetic field data acquired during actual flight conditions.
A computer program is described in detail for laminar, transitional, and/or turbulent boundary-layer flows of non-reacting (perfect gas) and reacting gas mixtures in chemical equilibrium. An implicit finite difference scheme was developed for both two dimensional and axisymmetric flows over bodies, and in rocket nozzles and hypervelocity wind tunnel nozzles. The program, program subroutines, variables, and input and output data are described. Also included is the output from a sample calculation of fully developed turbulent, perfect gas flow over a flat plate. Input data coding forms and a FORTRAN source listing of the program are included. A method is discussed for obtaining thermodynamic and transport property data which are required to perform boundary-layer calculations for reacting gases in chemical equilibrium.
A computer simulation program to model the redistribution of particulate contaminants on a spacecraft after launch is developed. The component models for particulate adhesion, meteoroid impact, and electrostatic forces are described and intermediate results are presented. The results of a sample calculation show that the recontamination process is important.
A new perturbation expansion is derived for the structure of rotating bodies in hydrostatic equilibrium. The method uses an expansion of the density on Legendre polynomial functions of angle, and can be developed analytically in a manner analogous to the standard level-surface perturbation theory. The new theory proceeds from a prescribed pressure-density relation rather than from a prescribed density distribution, and is both simpler and more physically transparent than the level-surface approach. High zonal harmonics are shown to arise via a transfer function involving derivatives of the interior sound velocity, and via mixing of multipole density components in the outer shell of the planet. Sample calculations for polytropic sequences are presented, as well as standard gravity models for Jupiter and Saturn. Mathematical subleties of the theory are discussed in an appendix.
A computer simulation program to model the redistribution of particulate contaminants on a spacecraft after launch was developed. The component models for particulate adhesion, meteoroid impact, and electrostatic forces are described and intermediate results are presented. The results of a sample calculation show that the recontamination process is important.
The reasons for studying cosmic-ray transport theory are summarized and the fundamentally three-dimensional nature of the process is pointed out. It is shown that observations in the solar ecliptic plane cannot unambiguously test transport theories since the solutions to the transport equations depend critically on boundary conditions and variation of parameters such as diffusion tensor out of the ecliptic. Sample calculations (Fokker-Planck coefficient) are shown which illustrate the problem. It is concluded that out-of-the-ecliptic observations are essential to further test transport theory.
A computer program for CDC 6600 is developed for the nonlinear sonic boom analysis including the asymmetric effect of lift near the vertical plane of symmetry. The program is written in FORTRAN 4 language. This program carries out the numerical integration of the nonlinear governing equations from the input data at a finite distance from the airplane configuration at a flight altitude to yield the pressure signitude at ground. The required input data and the format for the output are described. A complete program listing and a sample calculation are given.