Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sample return”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Aeroheating Testing of the Mars Sample Return Earth Entry System with Surface Roughness

The Mars Sample Return Earth Entry System is a mission concept which would be the first NASA entry vehicle to utilize a woven thermal protection system as well as a 52.5 degree sphere-cone forebody geometry. Due to its novel design, historic experimental data sets were insufficient to validate the models used to characterize the expected aerothermal environment. A wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project in the NASA Langley 20-Inch Mach 6 Air Tunnel in order to obtain validation data. The December 2023 test entry of this campaign sought to obtain thermographic data to capture the impact of supersonic flow near woven surface roughness elements on convective heating augmentation, which was the largest remaining uncertainty in aerothermal design of the Earth Entry System. Data obtained were in family with prior results obtained on identical woven patterns without supersonic flow present at roughness elements, and it was found that this presence of supersonic flow did not have a noticeable effect on surface convective heating augmentation. Data were directly leveraged to support the NASA Mars Sample Return flight program and this data set is valuable for validating computational solutions on roughness-resolved grids.

Mars Sample Return↗
NASA NTRS1982

Navigation system design for a Halley sample return mission

A ballistic sample return mission to Comet Halley was recently considered by the United States. This paper describes the navigation system and the navigation strategy which would have been employed in such a mission, assuming a launch in August of 1985, an arrival at the comet in March of 1986, and a return to earth in August of 1989. Estimates of spacecraft comet- and earth-relative orbit determination accuracies are presented as functions of time. Target-relative delivery accuracies for the spacecraft and associated trajectory correction maneuver requirements are presented also.

Wood, L. J.↗
NASA NTRS2005

Human safety analysis for the Genesis Sample Return mission

The Genesis sample return capsule (SRC) was NASA's first high-profile ballistic re-entry over the United States. Because of the delta-V-imprarting nature of the SRC release sequence, the SRC was targeted to various points in Northeast Nevada and Northwest Utah. Its final target was the Utah Test and Training Range, which is operated by the US Air Force.

Wahl, Tom↗
NASA NTRS2019

Potential campaign architectures and mission design challenges for near-term international Mars Sample Return mission concepts

Mars Sample Return (MSR) continues to be a high priority in the planetary science community and a decades-long goal of international planetary exploration programs. Options for architectures and mission concepts are currently under study by NASA and ESA to find potential partnership opportunities to achieve MSR in the 2020s. The major elements of a potential MSR campaign have significant architectural flexibility and mission launch, arrival, and return options. The decision criteria often depend on mission design and functional allocations across many elements. This paper outlines the reference architecture and key trades among the campaign elements.

Olikara, Zubin↗
NASA NTRS1988

Present imaging limitations to providing a geological assessment of potential sample return sites on Mars

A Mars sample return mission will provide a huge increase in knowledge about the region explored by the roving vehicle. However, presently there are some important limitations on the extent to which the geology of a potential site can be understood prior to landing the sample return vehicle on Mars. These limitations could affect not only the potential science return of the mission but also the safety of the vehicle. These limitations are examined.

Zimbelman, James R.↗
NASA NTRS2024

Preliminary Analyses of Asteroid Bennu Samples Returned by NASA’s OSIRIS-REx Mission

NASA’s OSIRIS-REx mission returned ~122 g of pristine carbonaceous regolith from Bennu on September 24, 2023. The science team is performing analyses of the mineralogy, chemical and isotopic compositions, and physical properties of the samples. The returned samples consist of particles ranging up to 3.5 cm in size with angular and hummocky morphologies predominating. Reflectance spectra over the visible and infrared wavelengths collected during the spacecraft encounter contained features indicating abundant hydrated phyllosilicates, carbonates, magnetite, organic matter, and rare anhydrous silicates. Laboratory analyses confirmed these detections and identified several other major and minor phases including abundant FeNi sulfides, minor hydrated Mg-rich phosphates as encrustations and in veins, and presolar grains. The Bennu samples show evidence for extensive aqueous alteration and resemble the rare and chemically primitive CI carbonaceous chondrites and samples returned from Ryugu by JAXA’s Hayabusa2 mission. Samples of Bennu’s uppermost surface, collected by contact pads, help us to understand how recent impacts and irradiation processes have changed the optical properties of Bennu surface materials measured by remote sensing. The analyses thus far highlight the value of sample return by illustrating the pristine nature of the samples compared to meteorites that have been compromised and altered by exposure to the terrestrial environment.

Lindsay P Keller↗
NASA NTRSDate not supplied

Small Spacecraft Sample Return Mission Concept to Support Gateway and Lunar Science

The Lunar Gateway is a planned orbital outpost to support Lunar surface, Cislunar, and deep space exploration activities. NASA, together with international and commercial partners, are providing various capabilities, infrastructure, and services to build the Lunar economy. As Gateway capabilities and transportation logistics evolve, utilization is expected to increase, providing ample science, technology demonstration, and commercial development opportunities. Elements of the transportation network supporting Lunar activities are primarily focused on the outbound segment, which include Commercial Lunar Payload Services (CLPS), Human Landing System (HLS), Deep Space Logistics (DSL), and the SLS/Orion crew transportation system. Initially, the only Earth return segment will be provided via Orion. However, infrequent mission cadence (once every 12 months), limited payload return mass (100 kg), and operational constraints suggest that additional sample return logistics capability will be needed. Sustaining long-term presence at the Moon will likely require innovative approaches for frequent and affordable payload return. NASA Ames Research Center and the DSL team at Kennedy Space Center (which provides the Gateway Logistics Services missions) have investigated the development of a small spacecraft-based sample return capability to complement Orion. The goal of the first mission is to demonstrate the capability as a part of an early DSL mission, and provide up to 10 kg of scientific sample return from the Gateway. The mission concept envisions the progressive addition of sample return capabilities, including returning temperature- and acceleration-sensitive payloads, and evolution into a commercially provided service, similar to existing ISS payload return logistics. An overview of payload science and technology use cases and small spacecraft mission concepts will be presented to engage scientists, payload developers and mission planners who are considering Lunar exploration activities that will require the return of high-value samples from the Gateway and/or the lunar surface.

Small Spacecraft↗
NASA NTRS2015

Contemporary Impact Analysis Methodology for Planetary Sample Return Missions

Development of an Earth entry vehicle and the methodology created to evaluate the vehicle's impact landing response when returning to Earth is reported. NASA's future Mars Sample Return Mission requires a robust vehicle to return Martian samples back to Earth for analysis. The Earth entry vehicle is a proposed solution to this Mars mission requirement. During Earth reentry, the vehicle slows within the atmosphere and then impacts the ground at its terminal velocity. To protect the Martian samples, a spherical energy absorber called an impact sphere is under development. The impact sphere is composed of hybrid composite and crushable foam elements that endure large plastic deformations during impact and cause a highly nonlinear vehicle response. The developed analysis methodology captures a range of complex structural interactions and much of the failure physics that occurs during impact. Numerical models were created and benchmarked against experimental tests conducted at NASA Langley Research Center. The postimpact structural damage assessment showed close correlation between simulation predictions and experimental results. Acceleration, velocity, displacement, damage modes, and failure mechanisms were all effectively captured. These investigations demonstrate that the Earth entry vehicle has great potential in facilitating future sample return missions.

Perino, Scott V.↗
NASA NTRS1992

Comet nucleus and asteroid sample return missions

Three Advanced Design Projects have been completed this academic year at Penn State. At the beginning of the fall semester the students were organized into eight groups and given their choice of either a comet nucleus or an asteroid sample return mission. Once a mission had been chosen, the students developed conceptual designs. These were evaluated at the end of the fall semester and combined into three separate mission plans, including a comet nucleus same return (CNSR), a single asteroid sample return (SASR), and a multiple asteroid sample return (MASR). To facilitate the work required for each mission, the class was reorganized in the spring semester by combining groups to form three mission teams. An integration team consisting of two members from each group was formed for each mission so that communication and information exchange would be easier among the groups. The types of projects designed by the students evolved from numerous discussions with Penn State faculty and mission planners at the Johnson Space Center Human/Robotic Spacecraft Office. Robotic sample return missions are widely considered valuable precursors to manned missions in that they can provide details about a site's environment and scientific value. For example, a sample return from an asteroid might reveal valuable resources that, once mined, could be utilized for propulsion. These missions are also more adaptable when considering the risk to humans visiting unknown and potentially dangerous locations, such as a comet nucleus.

Source record↗
NASA NTRS2002

Probabilistic Design of a Mars Sample Return Earth Entry Vehicle Thermal Protection System

The driving requirement for design of a Mars Sample Return mission is to assure containment of the returned samples. Designing to, and demonstrating compliance with, such a requirement requires physics based tools that establish the relationship between engineer's sizing margins and probabilities of failure. The traditional method of determining margins on ablative thermal protection systems, while conservative, provides little insight into the actual probability of an over-temperature during flight. The objective of this paper is to describe a new methodology for establishing margins on sizing the thermal protection system (TPS). Results of this Monte Carlo approach are compared with traditional methods.

Dec, John A.↗
NASA NTRSDate not supplied

Overview of Micrometeoroid and Orbital Debris Analysis Process for Mars Sample Return Earth Entry System

Introduction: Micrometeoroid and orbital debris (MMOD) risk analyses for the Mars Sample Return (MSR) Earth Entry System (EES) have been significantly more rigorous than previously flown missions because of its categorization as a Class V restricted return mission. This means the returned samples present significant concern for biogenic contamination. These analyses seek to determine if a micrometeoroid or orbital debris strike would result in loss of containment assurance and are summarized in the flowchart in Fig. 1. Methodology: The mission is considered in two MMOD phases: a pre-release phase where the EES is protected by a Micrometeoroid Protection System (MMPS) and a post-release phase called “free-flight” where the EES is exposed directly to the MMOD environment. These phases correspond to interplanetary cruise and imminent re-entry, respectively. To inform the MMPS design, a 30-shot high velocity impact testing (HVIT) series on candidate configurations at NASA White Sands Test Facility was completed in the summer of 2022. Sample post-shot images are shown in Fig 2 [1]. These data are used to baseline the MMPS design and to tune the hydrocode simulations. ALE3D, CTH, and SPHC are the hydrocodes that simulate physics of high-speed impacts [2]. Results generated with these populate a penetration depth versus energy space beyond the testable velocity regime of HVIT (~7 km/s). The penetration depth versus energy space data are used to define a critical projectile diameter function called a Ballistic Limit Equation (BLE), where the projectile “criticality” is determined by zone dependent failure criteria defined a-priori [3]. For example, the nose of the heatshield has a failure criterion of 50% TPS penetration, assigned because the landing loads are concentrated on that region and no substructure damage is permitted. The BLEs for each vehicle material zone are input into the BUMPER 3 code, along with the vehicle surface mesh and the corresponding space environment model, to calculate a probability of penetration or number of penetrations. The environment models, MEM3 for MM and ORDEM 3.2 for OD, simulate the meteoroid environment from 0.2 to 2 au based on the Grün flux equation, and the debris environment up to 40,000 km altitude from Earth surface, respectively [4,5]. Presentation Focus: The presentation or poster will present the results to-date focusing on the full risk analysis process flow seen in Fig. 1. Details on the derivation of the failure criteria will be discussed, along with HVIT results and how these influenced the MMPS configuration baseline decision. Further, results of hydrocode simulations will be presented and the tuning to HVIT outputs will be described. Finally, the strategies that direct the BLE formulation will be reviewed, specifically, for the EES elements that are most exposed to the MMOD environment.

mmod↗
NASA NTRSDate not supplied

The Comet Astrobiology Exploration Sample Return (CAESAR) Mission

The Comet Astrobiology Exploration Sample Return (CAESAR) mission will acquire and return to Earth for laboratory analysis a minimum of 80 grams of surface material from the nucleus of comet 67P/Chur-yumov-Gerasimenko (67P). CAESAR will characterize the surface region sampled, preserve the collected sample in a pristine state, and return evolved volatiles by capturing them in a separate gas reservoir. NASA Goddard Space Flight Center provides project management, systems engineering, safety and mission assurance, contamination control, mission operations, and many other important functions. Northrop Grumman Space Systems will build the spacecraft, based on Dawn mission heritage, which like CAESAR, uses solar electric propulsion. CAESAR was selected by for Phase A study in the New Frontiers 4 Competition and will be proposed to New Frontiers 5.Collection of a sample from the surface of comet 67P is facilitated by a set of cameras that together provide images to support sample site selection, perform optical navigation, and document the sample before, during, and after col-lection. The sample is collected at the end of an arm during a 5-second touch-and-go (TAG) maneuver with the Sample Acquisition System (SAS)designed by Honeybee Robotics for the surface properties of comet 67P observed by the Rosetta mission. After sample collection, and while the sample is still cold (< -80°C), the TAG Arm inserts the sample container into the Sample Containment System (SCS) mounted inside the Sample Return Capsule (SRC). The SCS is sealed, preventing the sample from escaping into space. The sample is slowly warmed inside the SCS to enable sublimation of volatiles, which are collected in the Gas Containment System (GCS), a passively cooled gas reservoir. Separating the volatiles from the solid sample protects the solid sample from alteration. Once all sublimated H2O is transferred to the GCS, the GCS is sealed to capture the volatile sit contains, and the SCS is vented to space to maintain the solid sample under vacuum. The SCS vent is closed before Earth entry to prevent atmospheric contamination. Detailed laboratory analyses of the sample from 67P will trace the history of volatile reservoirs, delineate the chemical pathways that led from simple interstellar species to complex molecules, constrain the evolution of the comet, and evaluate the role of comets in delivering water and prebiotic organics to the early Earth. CAESAR will achieve these goals by carrying out coordinated sample analyses that will link macroscopic properties of the comet with microscale mineralogy, chemistry, and isotopic studies of volatiles and solids. Most of the sample (≥75%) will be set aside for analyses by generations of scientists using continually advancing tools and methods, yielding an enduring scientific treasure that only sample return can provide. This presentation will review development conducted during NF4 Phase A and discuss the NF5 mission concept.

A G Hayes↗
NASA NTRS1983

The Antaeus Project - An orbital quarantine facility for analysis of planetary return samples

A design is presented for an earth-orbiting facility for the analysis of planetary return samples under conditions of maximum protection against contamination but minimal damage to the sample. The design is keyed to a Mars sample return mission profile, returning 1 kg of documented subsamples, to be analyzed in low earth orbit by a small crew aided by automated procedures, tissue culture and microassay. The facility itself would consist of Spacelab shells, formed into five modules of different sizes with purposes of power supply, habitation, supplies and waste storage, the linking of the facility, and both quarantine and investigation of the samples. Three barriers are envisioned to protect the biosphere from any putative extraterrestrial organisms: sealed biological containment cabinets within the Laboratory Module, the Laboratory Module itself, and the conditions of space surrounding the facility.

Sweet, H. C.↗
NASA NTRS1988

Mars Rover Sample Return mission delivery and return challenges

The Mars Rover Sample Return mission is a robotic exploration mission culminating in the return of atmospheric and surface samples from Mars to Earth. To accomplish this complex mission requires sophisticated autonomous systems for many time-critical operations associated with the delivery and return phases, since the round trip light times preclude Earth-based control of these operations. In addition, there are significant engineering and technology challenges to be addressed to meet the mission science and exploration objectives.

Cohen, Aaron↗
NASA NTRS2018

Mars Sample Return: Grand Challenge for EDL

A year ago, I gave a talk in anticipation of a Mars Sample Return effort at the 9th Ablation Workshop. Since then a lot has happened. "April of this year, after a year of study phase, NASA and ESA (European Space Agency) signed a Statement of Intent (SOI) to jointly develop a Mars Sample Return plan to be submitted to their respective authorities by the end of 2019. This signing is historic, as it signals the desire, the readiness, and the willingness to work together to execute this inspiring mission, we all have the opportunity to tackle this grand challenge. We have the scientific and engineering maturity to identify the critical technologies ready to be applied, and with discipline this campaign can be executed affordably," Jim Watzin, Mars Program Executive, NASA. NASA Centers with JPL (Jet Propulsion Laboratory) leading the charge is in the midst of a pre-formulation phase for executing a Mars Sample Return before the end of next decade. The proposed talk builds on the previous year talk. In light of the agreement between NASA and ESA, NASA has assumed the responsibilities for developing the earth entry vehicle (EEV) that will fly along with a European Spacecraft and return with the sample from Mars. EEV will be deployed for entry into earth. The EEV design, development, testing and certification have to result in a highly reliable sample return system. The entire architecture has to be demonstrated to meet the planetary protection requirement. NASA is considering two distinctly different earth entry vehicle architectures and with each choice, many different ablative TPS (Thermal Protective Shield) candidates. As a result of the NASA-ESA ongoing studies, some of the key entry conditions and design requirements are better understood today and more are being scoped out. The heat-shield ablative TPS choice need to be done with a good understanding as it plays a very significant role in determining the robustness of the EEV. Knowledge about how materials and system perform, and how the features could become flaws and how flaws lead to failure, etc. need to be clearly understood and the knowledge then need to be used to down select the TPS. This proposed talk will provide greater insight into the progress being made and the challenges that need to be tackled.

Mars Sample Return: Grand Challenge for EDL↗
NASA NTRS1973

Summary of the proceedings of the Mars Surface Sample Return Symposium

A summary is made of various technical and scientific aspects of a Mars surface sample return mission. Particular attention was focused on the question of back contamination. Data are also given on problems inherent in the back contamination issue and return sample mission; areas where additional research is needed were pointed out. Quarantine procedures, safety measures, and sterilization effects on organic-inorganic data, and biological problems were also dealt with.

Devincenzi, D. L.↗