Search NASA⌕ Search

SEARCH · Search NASA

Results for “Secondary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Influence of pressure driven secondary flows on the behavior of turbofan forced mixers

An analytical and experimental study was performed to determine the influence of pressure driven secondary flows on the behavior of turbofan forced mixer nozzles. The basic secondary flow structure entering the nozzle was identified experimentally and was composed of a strong vortex system aligned with the radial interface between the fan and core streams. A generic secondary flow vortex structure was constructed for input to the analysis to represent the large scale structure of this inflow condition. Comparison between experiment and analysis at five axial stations showed very good agreement and indicated that this vortex system was convected downstream and dominated the mixing process.

Anderson, B.↗
NASA NTRS1979

Effects of secondary yield parameter variation on predicted equilibrium potential of an object in a charging environment

A study is presented in which the sensitivity of predicted equilibrium potential to changes in secondary electron yield parameters is investigated using MATCHG, a simple charging code which incorporates the NASCAP material property formulations. It is found that equilibrium potential is a sensitive function of one of the two parameters specifying secondary electron yield due to proton impact and of essentially all the parameters specifying yield due to electron impact. In addition, it is found that information on the electron generated secondary yield parameters can be obtained from monoenergetic beam charging data if charging rates as well as equilibrium potentials are accurately recorded.

Purvis, C. K.↗
NASA NTRS1981

Prediction of laminar and turbulent primary and secondary flows in strongly curved ducts

The analysis is based on a primary secondary velocity decomposition in a given coordinate system, and leads to approximate governing equations which correct an a priori inviscid solution for viscous effects, secondary flows, total pressure distortion, heat transfer, and internal flow blockage and losses. Solution of the correction equations is accomplished as an initial value problem in space using an implicit forward marching technique. The overall solution procedure requires significantly less computational effort than Navier-Stokes algorithms. The solution procedure is effective even with the extreme local mesh resolution which is necessary to solve near wall sublayer regions in turbulent flow calculations. Computed solutions for both laminar and turbulent flow compared very favorably with available analytical and experimental results. The overall method appears very promising as an economical procedure for making detailed predictions of viscous primary and secondary flows in highly curved passages.

Kreskovsky, J. P.↗
NASA NTRS1980

Secondary mirror subassembly in the 2.4 m NASA optical telescope

The secondary mirror is a circular disc provided with a shoulder. Three clamps located 120 deg apart support the mirror shoulder. On one side of the mirror shoulder, a coated graphite-epoxy ring connects the three clamps. Three axial flexures with a low radial compliance extend out from a support platform constructed of coated graphite-epoxy box structs and invar corners, and provide a nominal in-plane zero coefficient of thermal expansion. In each invar corner piece, a ball joint provides a connection to a expansion. In each invar corner piece, a ball joint provides a connection to a six-degree-of-freedom adjustment system that can move the secondary mirror with a high degree of precision in defocus, decenter, and tilt. Thermal controls that maintain structural-element temperature variations within specified limits insure that the assembly exceeds stability and figure control requirements on the secondary mirror.

Ahmed, N.↗
NASA NTRS1983

Comparison of visualized turbine endwall secondary flows and measured heat transfer patterns

Various flow visualization techniques were used to define the secondary flows near the endwall in a large heat transfer data. A comparison of the visualized flow patterns and the measured Stanton number distribution was made for cases where the inlet Reynolds number and exit Mach number were matched. Flows were visualized by using neutrally buoyant helium-filled soap bubbles, by using smoke from oil soaked cigars, and by a few techniques using permanent marker pen ink dots and synthetic wintergreen oil. Details of the horseshoe vortex and secondary flows can be directly compared with heat transfer distribution. Near the cascade entrance there is an obvious correlation between the two sets of data, but well into the passage the effect of secondary flow is not as obvious.

Gaugler, R. E.↗
NASA NTRS1982

Secondaries of eclipsing binaries. IV - The triple system Lambda Tauri

High signal-to-noise ratio Reticon observations of Lambda Tauri have been obtained along with high-quality orbital elements for both the primary and secondary of the eclipsing system. The velocity curve of the secondary is determined for the first time. The findings include: K(1) = 56.9 + or - 0.6 km/s, K(2 = 215.6 + or - 0.7 km/s, m(1) = 7.18 + or - 0.09 solar masses, and m(2) = 1.89 + or - 0.04 solar masses. The 33-day periodicity in the residuals is confirmed and is present in the secondary velocities as well as those of the primary, and can unambiguously be ascribed to orbital motion about a third body. The K and f(m) for the 33-day orbit are 10.1 + or - 0.7 km/s and 0.0034 + or - 0.0008 solar masses. The photometry shows that the orbits are coplanar to within seven degrees. The mass of the third body is 0.7 + or - 0.2 solar masses; it is most probably a K dwarf.

Fekel, F. C., Jr.↗
NASA NTRS1983

A comparison of model helicopter rotor Primary and Secondary blade/vortex interaction blade slap

A study of the relative importance of blade/vortex interactions which occur on the retreating side of a model helicopter rotor disk is described. Some of the salient characteristics of this phenomenon are presented and discussed. It is shown that the resulting Secondary blade slap may be of equal or greater intensity than the advancing side (Primary) blade slap. Instrumented model helicopter rotor data is presented which reveals the nature of the retreating blade/vortex interaction. The importance of Secondary blade slap as it applies to predictive techniques or approaches is discussed. When Secondary blade slap occurs it acts to enlarge the window of operating conditions for which blade slap exists.

Hubbard, J. E., Jr.↗
NASA NTRS1983

Fate of very low-mass secondaries in accreting binaries and the 1.5-ms pulsar

It is shown analytically that the canonical stability postulate for low-mass binaries can be inaccurate when the secondary component mass is less than 0.02 solar mass. The adjustable evolutionary parameter h is demonstrated to have a value (in terms of the mass flow effects) of 2/3, less than which catastrophic instability and tidal disruption of the secondary might occur. The disrupted secondary would be reduced to a remnant significantly smaller in mass than the earth, and not be observable visually. Additionally, close passage by another star could accelerate or initiate the process. The model is applicable to the pulsar binary PSR1937+214, and is noted not to conflict with spin-up theories.

Ruderman, M. A.↗
NASA NTRS1984

Beam impingement angle effects on secondary electron emission characteristics of textured pyrolytic graphite

Experimentally determined values of true secondary electron emission and relative values of reflected primary electron yield for untreated and ion-textured pyrolytic graphite over a range of primary electron energy levels and electron beam impingement angles are presented. Information required to develop high efficiency multistage depressed collectors (MDC's) for microwave amplifier traveling-wave tubes for space communication and aircraft applications is provided. To attain the highest possible MDC efficiencies, the electrode surfaces must have low secondary electron emission characteristics. Pyrolytic graphite, a chemically vapor-deposited material, is a particularly promising candidate for this application. The pyrolytic graphite surfaces studied were tested over a range of primary electron beam energies and beam impingement angles from 200 to 2000 eV and direct (0 deg) to near-grazing angles (85 deg), respectively. Surfaces both parallel to and normal to the planes of material deposition were examined. The true secondary electron emission and reflected primary electron yield characteristics of the pyrolytic graphite surfaces are compared to those of sooted control surfaces.

Curren, A. N.↗
NASA NTRS1985

Calculation of secondary-electron escape currents from inclined-spacecraft surfaces in a magnetic field

In low Earth orbit, the geomagnetic field B(vector) is strong enough that secondary electrons emitted from spacecraft surfaces have an average gyroradius much smaller than typical dimensions of large spacecraft. This implies that escape of secondaries will be strongly inhibited on surfaces which are nearly parallel to B(vector), even if a repelling electric field exists outside them. This effect is likely to make an important contribution to the current balance and hence the equilibrium potential of such surfaces, making high voltage charging of them more likely. Numerically calculated escaping secondary electron fluxes are presented for these conditions. For use in numerical spacecraft charging simulations, an analytic curve fit to these results is given which is accurate to within 3% of the emitted current.

Laframboise, J. G.↗
NASA NTRS1985

Propagation and secondary production of low energy antiprotons in the atmosphere

Current theories, in which the observed antiproton component is attributed strictly to secondary production in high energy inelastic collisions of protons with the interstellar medium or the atmosphere, apparently fail to explain the relatively high p vertical intensities measured at mountain and balloon altitudes. Therefore, a more careful calculation of the theoretical secondary intensity spectra is required before more exotic sources for these excess p's can be explored. A one dimensional diffusion equation is used to calculate the expected vertical intensity of p's due only to secondary production in the atmosphere; any assumed primary p spectrum is also included. Two adjustable parameters, the inelasticity and charge exchange in nucleon-nucleus collisions, were included in the algorithm. In order to obtain an independent estimate of their values the proton vertical intensities in the atmosphere were calculated, adjusting the parameters until the curves fit the experimental proton data, and then assumed that these values were identical in antinucleon-nucleus collisions.

Bowen, T.↗
NASA NTRS1984

Infrared observations of the eclipse of Epsilon Aurigae Direct measurement of the 500 K secondary at 5, 10, and 20 microns

Photometric data of the once-every-27 yr eclipse of the Epsilon Auriga F supergiant are reported. The data were taken on 28 nights from July 1982-May 1984 and covered the 1.25-20 microns region. The secondary object was identified at 5, 10, and 20 microns when the eclipse removed 48 percent of the F star's light. The data indicated that the secondary is a compact object surrounded by a large optically thick cloud, with a luminosity under 0.01 of the primary. The secondary's mass is, however, more than 14 solar masses.

Backman, D. E.↗
NASA NTRS1984

The Epsilon Aurigae secondary - A binary embedded within a disk?

The eclipse characteristics of Epsilon Aurigae, which is an F supergiant in a spectroscopic binary system, imply a secondary that is elongated, measuring about 10 AU by less than 1 AU, with a mass of about 16 solar masses. Recent IR observations, however, indicate a color temperature of about 500 K and a luminosity that is apparently less than 1 percent that of a 16-solar mass star. It is presently suggested that the secondary consists of a close binary embedded in an optically thick disk, which is viewed edge-on. The observed low luminosity of the secondary would then be due to two 8-solar mass stars' luminosity, which is about 10 percent that of a 16-solar mass star, together with the loss of 90 percent of the emitted energy through escape from the poles of the disk. This hypothesis is discussed in relation to radio and UV observations of Epsilon Aurigae.

Lissauer, J. J.↗
NASA NTRS1986

Variable-Friction Secondary Face Seals

Feedback-controlled friction or damping suppresses vibrations. Variable-friction secondary seal conceived to control vibration and stability of primary seal ring over wide range of conditions. By varying friction force or damping applied to primary seal ring, vibration controlled to provide stable operation. Advantages of "variablefriction secondary seal": face-seal stability controlled as function of primary-ring vibration amplitudes, and also friction remotely changed to achieve acceptable vibration amplitudes for large range of seal-operating conditions without compromising secondary-seal performance. Concept also useful in seal testing in which dynamic stability of face seals is under evaluation.

Dirusso, E.↗
NASA NTRS1986

Verification of an improved computational design procedure for TWT-dynamic refocuser-MDC systems with secondary electron emission losses

A computational procedure for the design of TWT-refocuser-MDC systems was used to design a short 'dynamic' refocusing system and highly efficient four-stage depressed collector for a 200-W 8-18-GHz TWT. The computations were carried out with advanced multidimensional computer programs which model the electron beam as a series of disks of charge and follow their trajectories from the RF input of the TWT, through the slow-wave structure and refocusing section, to their points of impact in the depressed collector. Secondary emission losses in the MDC were treated semiquantitatively by injecting a representative beam of secondary electrons into the MDC analysis at the point of impact of each primary beam. A comparison of computed and measured TWT and MDC performance showed very good agreement. The electrodes of the MDC were fabricated from a particular form of isotropic graphite that was selected for its low secondary electron yield, thermal expansion characteristics, ease of machinability and vacuum properties. This MDC was tested at CW for more than 1000 h with negligible degradation in TWT and MDC performances.

Ramins, P.↗
NASA NTRS1986

Flow visualization of secondary flows in three curve ducts

Streak photography flow measurements are made for secondary flows in three 90-deg curved ducts of square cross section and different radii of curvature, at Dean numbers of 15,000-36,000 and radius ratios of 0.5, 2.3, and 3.0. Attention is given to secondary flow patterns for three cross sections in each bend: the inlet zero-deg plane, the midpoint 45-deg plane, and the outlet 90-deg plane. After a rapid transition region, the pressure-driven secondary flow patterns were characterized by flow moving toward the outer curved wall at the axial midplane and returning to the inner wall along the duct walls. The 0.5-radius ratio elbow was found to have the greatest influence on upstream inlet conditions.

Sanz, G. M.↗
NASA NTRS1986

Secondary metallicity in analytic models of chemical evolution of galaxies

Analytic models of the chemical evolution of galactic regions that grow in mass owing to the continuous infall of matter are characterized, emphasizing the solutions for secondary nuclei (defined as those nuclei whose stellar yields are proportional to the abundance of a primary seed nucleus) in the families of models described by Clayton (1984 and 1985). Wide variations in time dependence of both primary and secondary nuclei as well as in the ratio of secondary to primary are displayed by these model families, confirming again the usefulness of these families as interpretive guides if galaxies do in fact evolve with substantial infall. Additionally, analytic solutions are presented for two other possible interesting systems: the evolution of abundances if the primary metallicity in the infall is increasing in time, and the evolution of abundances if the primary yield changes linearly with time owing to continuous changes in the stellar mass function, the opacity, or other astrophysical agents. Finally, test evaluations of the instantaneous recycling approximation on which these analytic models rely are presented.

Clayton, D. D.↗
NASA NTRS1988

Net current measurements and secondary electron emission characteristics of the Voyager plasma science experiment and their impact on data interpretation

The Voyager Plasma Science (PLS) instrument is capable of returning integral (DC) current measurements, similar in some respects to measurements made with a Langmuir probe or a retarding potential analyzer, although there are significant differences. The integral measurements were made during a calibration sequence in the solar wind, during Cruise Science Maneuvers, and within the magnetospheres of Jupiter and Saturn by Voyager 1. After the failure of the PLS experiment following the Saturn encounter, that instrument was placed in the DC return mode returning possibly usable data from early 1981 through early 1985. The DC return measurements are difficult to interpret and are above threshold values only for relatively large fluxes; the determination of the measured current level is dependent on the operating temperature of the preamplifiers which further complicates the interpretation. Nevertheless, these measurements can be used to determine the efficiency of the suppressor grid at preventing the loss of secondary electrons off the collector plate. Some DC return measurements have been invaluable in aiding in the interpretation of some electron plasma measurements not previously understood. It is found that electron spectra can be significantly modified by the presence of second generation secondary electrons produced by either first generation secondaries or photoelectrons on the support ring of the negative high voltage modulator grid within the instrument housing.

Mcnutt, Ralph L., Jr.↗