Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Calibration of CDM-Based Creep Constitutive Model Using Accelerated Creep Test (ACT) Data

In conventional creep testing (CCT) a specimen is subject to constant load and temperature for a long-duration until creep rupture occurs. Conventional testing can be costly when considering the number of experiments needed to characterize the creep response of a material over a range of stress and temperature. To predict long-term creep-rupture properties, the time-temperature-stress superposition principle (TTSSP) approach has been employed where stress and/or temperature is applied at an elevated level; the result of which are extrapolated down to low stress and/or temperature conditions. These methods have been successful in predicting minimum-creep-strain-rate (MCSR) and stress-rupture (SR) but suffer from an inability to predict the creep deformation curve or account for changes in deformation mechanisms or aging that occurs at long-duration. An accelerated technique, termed the Stepped isostress method (SSM) allows the accelerated testing of materials to determine their creep deformation response. Unlike TTSSP tests, the SSM test employs a single specimen where the stress is periodically step increased until rupture. The SSM creep deformation curve is processed (time and strain shifted) to produce an accelerated creep deformation curve that represent the creep deformation curve at the initial stress level in SSM. A processing procedure for metals has yet to be developed. The research objective of this study is to develop a processing procedure for SSM test data using a creep-damage constitutive model. Triplicate SSM tests were conducted on Ni-based superalloy Inconel 718 at 650°C with stress being periodically increased until rupture. Triplicate CCT tests were conducted at the initial stress level of the SSM tests. The Sine-hyperbolic (Sinh) creep-damage model was employed in this study. The Sinh creep-damage constitutive model is based on coupled creep strain rate and damage evolution equations; where both rates are dependent on the current state of damage. Calibration is two-step: analytical and numerical optimization. Each stepped creep deformation curve is tackled quasi-analytically to determine MCSR and SR related material constants and accumulated damage. The damage accumulated at the end of each step was then passed onto subsequent steps to calibrate the MCSR, rupture prediction, and damage evolution. Numerical optimization was applied to optimize model constants involved in the creep strain constitutive equations in order to generate best-fitted Sinh creep deformation curves. The Sinh model predictions were compared to the SSM and CCT data. The Sinh model satisfactorily predicts the SSM data and thus the calibrated material constants provides a good estimate of rupture found in the CCT data. Calibration using SSM data reduces the number of tests needed to calibrate a model; significantly reducing costs. A single SSM test replaces numerous creep tests at different stresses.

36 MATERIALS SCIENCE↗
NASA NTRS2020

Modal Test of the NASA Mobile Launcher at Kennedy Space Center

The NASA Mobile Launcher (ML), located at Kennedy Space Center (KSC), has recently been modified to support the launch of the new NASA Space Launch System (SLS). The ML is a massive structure—consisting of a 345-foot tall tower attached to a two-story base, weighing approximately 10.5 million pounds—that will secure the SLS vehicle as it rolls to the launch pad on a Crawler Transporter, as well as provide a launch platform at the pad. The ML will also provide the boundary condition for an upcoming SLS Integrated Modal Test (IMT). To help correlate the ML math models prior to this modal test, and allow focus to remain on updating SLS vehicle models during the IMT, a ML-only experimental modal test was performed in June 2019. Excitation of the tower and platform was provided by five uniquely-designed test fixtures, each enclosing a hydraulic shaker, capable of exerting thousands of pounds of force into the structure. For modes not that were not sufficiently excited by the test fixture shakers, a specially-designed mobile drop tower provided impact excitation at additional locations of interest. The response of the ML was measured with a total of 361 accelerometers. Following the random vibration, sine sweep vibration, and modal impact testing, frequency response functions were calculated and modes were extracted for three different configurations of the ML in 0 Hz to 12 Hz frequency range. This paper will provide a case study in performing modal tests on large structures by discussing the Mobile Launcher, the test strategy, an overview of the test results, and recommendations for meeting a tight test schedule for a large-scale modal test.

Hydraulic shakers↗
DOE OSTI2020

Extremum seeking for optimal control problems with unknown time-varying systems and unknown objective functions

We consider the problem of optimal feedback control of an unknown, noisy, time-varying, dynamic system that is initialized repeatedly. Examples include a robotic manipulator which must perform the same motion, such as assisting a human, repeatedly and accelerating cavities in particle accelerators which are turned on for a fraction of a second with given initial conditions and vary slowly due to temperature fluctuations. In this paper, we present an approach that applies to systems of practical interest. The method presented here is model independent; does not require knowledge of the objective function; is robust to measurement noise; is applicable for any set of initial conditions; is applicable to simultaneously controlling an arbitrary number of parameters; and may be implemented with a broad range of continuous or discontinuous functions such as sine or square waves. For systems with convex cost functions we prove that our algorithm will produce controllers that approach the minimal cost. For linear systems we reproduce the cost minimizing linear quadratic regulator optimal controller that could have been designed analytically had the system and cost function been known. We demonstrate the effectiveness of the algorithm with simulation studies of noisy and time-varying systems.

42 ENGINEERING↗
DOE OSTI2020

Tunable Electromechanical Liquid Crystal Elastomer Actuators

Liquid crystal elastomers (LCE) are soft materials which anisotropically shape morph in response to external stimuli. Herein, a method to produce large‐area carbon nanotube–LCE nanocomposite films with exceptional electrostrictive properties is examined. A methodology to produce telechelic precursor oligomeric composites at scale (>100 g) is presented along with the continuous casting and photocuring process. The carbon nanotubes are well‐aligned and well‐dispersed in the films, which exhibit exceptional anisotropic thermomechanical, optical, and thermal shape change characteristics. When an electric field is applied through the film thickness, the material quickly and reversibly contracts along the alignment direction. As an example, a compliant carbon nanotube–LCE film contracts >4% against a 140 kPa load, roughly comparable to the blocking force of many natural muscular tissues. Furthermore, it is demonstrated that this tunable contraction is dependent upon the electric field strength, and that the contraction mimics the form function of the input electric field (e.g., a sine wave). These compliant actuators are excellent candidates for incorporation into soft and/or biological systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Gluon to $\textrm{q}\overline{\textrm{q}}$ antenna in anisotropic QCD matter: spin-polarized and azimuthal jet observables

We study the production of a quark-antiquark antenna in the presence of a dense and anisotropic QCD medium. We assume the antenna to originate from an unpolarized gluon state, and consider both massless and massive final states. The medium anisotropy is captured by allowing the jet quenching coefficient to take different magnitudes in orthogonal directions with respect to the jet axis. We find that the final particle distribution is sensitive to the medium anisotropy, and more importantly, that this effect couples directly to the helicity/spin of the final states. We propose to look into these effects by performing a Fourier decomposition of the particle distribution inside the jet. In our medium model, we find that the spin independent terms contribute to the even harmonics of the cosine series. The helicity/spin dependence enters only through the sine Fourier series. We further explore the spin dependence by examining the degree of polarization of the final states in different directions. Our results indicate that the anisotropies present in the QCD matter produced in heavy ion collisions can be probed by studying azimuthal and spin observables inside jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Fractonic gauge theory of smectics

Motivated by striped correlated quantum matter, and the recently developed duality between elasticity of a two-dimensional (2D) crystal and a gauge theory, we derive a dual coupled U(1) vector gauge theory for a two-dimensional (2D) quantum smectic, where the disclination is mapped onto the fractonic charge, that we demonstrate can only move transversely to smectic layers. This smectic gauge theory dual also emerges from a gauge dual of a quantum crystal through a Higgs transition corresponding to a single flavor of its dipole condensation, an anisotropic quantum melting via dislocation proliferation. A condensation of the second flavor of dislocations a corresponds to another Higgs transition describing the smectic-to-nematic melting. We also utilize the electrostatic limit of this duality to formulate a melting of a 2D classical smectic in terms of a higher derivative sine–Gordon model, demonstrating its instability to a nematic at any nonzero temperature. Generalizing this classical duality to a 3D smectic, gives formulation of a 3D nematic-to-smectic transition in terms of an anisotropic Abelian-Higgs model.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A hierarchical stochastic modeling approach for representing point bar geometries and petrophysical property variations

The flow of fluids in point bars is affected by the existence of heterogeneities like shale drapes that are found on the surfaces of inclined heterolithic stratifications. In fact, these shale drapes can act as fluid flow baffles; therefore, developing a framework for modeling point bars and their associated heterogeneities is vital. In this study, a stochastic process-based modeling approach is presented for capturing the main point bar heterogeneities: accretion surfaces (i.e., the aerial heterogeneity) and inclined heterolithic stratifications (i.e., the vertical heterogeneity). The former was modeled using a sine-generation function and the latter, with a sigmoidal function after which they were combined into a 3D point bar model. To ensure proper modeling of petrophysical properties, we developed a more representative gridding scheme which generates curvilinear grids representative of the point bar geometry. This grid was then transformed into a rectilinear grid to allow for geostatistical simulation after which all petrophysical properties were mapped back into the original curvilinear grid. An essential element of this modeling approach is the stochastic representation of shale drapes at the interface between successive accretion surfaces. The workflow was tested using a real field dataset for the Cranfield field, Mississippi. The constructed model was then subjected to a flow simulation study mimicking a CO 2 storage scenario. Various sensitivities were simulated to evaluate the effect of heterogeneities on CO 2 flow within the point-bar. Results demonstrate the importance of representing point-bar related heterogeneity and the spatial distribution of shale drapes on CO 2 plume migration and storage.

58 GEOSCIENCES↗
DOE OSTI2022

Performance of reverse osmosis membrane with large feed pressure fluctuations from a wave-driven desalination system

Wave-driven desalination systems are proposed water treatment systems that involve reverse osmosis of seawater powered directly by wave motion. Such a configuration would result in drastic feed pressure fluctuations. For a technology conventionally operated with a constant feed condition, the effect of these variable pressures on membrane integrity and performance is unknown. Here, experiments were conducted with spiral wound membranes coupled to a system capable of producing feed pressure fluctuations of more than 400 psi. Feed composition included 5, 20, and 35 g/L NaCl, and a synthetic seawater at normal and 1.5x concentration. The variable feed conditions included sine-like pressure waves swings of 200-500 and 500-900 psi with frequencies of 1.25, 7.5, and 12 waves/min, and a model-generated random waveform. Between each wave experiment we performed membrane integrity tests at 650 psi and 25 g/L NaCl feed, which showed a 7.4% drop in the membrane's water permeability coefficient, an 18.4% flux decline, and more than 99% salt rejection over 1770 h of cumulative experimental time. Analysis of permeate samples showed high salt rejection. In general, variable feed pressure had no significant deleterious effect on membrane integrity or performance.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Constitutive behavior and processing maps of a new wrought magnesium alloy ZE20 (Mg-2Zn-0.2Ce)

ZE20 (Mg-2Zn-0.2Ce) 2 is a new wrought magnesium alloy with improved extrudability and mechanical properties [1]. To understand the constitutive behavior and workability of this new alloy, Gleeble thermomechanical testing has been carried out in this study. The flow stress behavior of ZE20 was investigated between 250 °C–450 °C and 10 –3 s –1 –1.0 s –1 in isothermal compression. Constitutive descriptions of the flow stress are provided. A new general approach at application of the extended Ludwik equation is demonstrated and was found to be more accurate than the hyperbolic sine Arrhenius model while having a similar number of model constants. Processing maps were developed based on the experimental results and are verified with microstructural investigation. A region of safe processing with non-basal texture and high activity of dynamic recrystallization (DRX) was found between 375 °C and 450 °C, from 10 –1 s –1 to 10–2.5 s –1 . A region of potentially safe processing with annealing that is associated with shear band nucleation of non-basal grains was identified for temperatures as low as 300 °C and rates as high as 10 –1 s –1 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic structure of triangular lattice compound Tb2Ni0.90Si2.94

AlB 2 -type ternary intermetallic compound Tb 2 Ni 0.90 Si 2.94 (space group P 6=mmm, hP 3, No. 191) was reported to exhibit spin freezing behaviour of the ferromagnetic clusters present in the system below T f = 9:9 K, along with the presence of spatially limited antiferromagnetic phase. In this work, on the basis of variable temperature zero-field neutron diffraction measurements, we have shown that the antiferromagnetic phase transition occurs for the compound below T N ~13 K. Neutron diffraction study indicates ab-plane non-collinear sine-modulated antiferromagnetic ordering of the system with wave vectors of k 1 = [±1/6, ±1/6, 0] and k 2 = [±1/3, ±1/3, 0] down to 1.7 K. The weak and diffuse nature of the magnetic Bragg peaks along with limited coherence length further confirm the short-range nature of the antiferromagnetic phase in this compound.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Improvement of the AC orbit bump method of local kick factor measurement using reference bunches

Here we have improved the AC orbit bump technique of local kick factor measurement. This technique, developed at NSLS-II a few years ago, is based on local sine-wave excitation of the electron beam by four fast correctors adjacent to the impedance location. By implementing reference bunches and the time gate function of beam position monitors, we are now able to measure the AC orbits of bunches with different intensities simultaneously. This improvement allows us to obtain the impedance-driven orbit distortion in a single measurement, significantly improving the measurement accuracy and reducing the measurement time.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of a thermal creep model for aluminum alloy 6061 cladding in U-10Mo monolithic fuel plates

Plate-type fuel elements consisting of a high-density, low-enriched uranium (LEU) U–10Mo-based fuel foil encapsulated in an aluminum alloy (AA) cladding are fabricated using the hot isostatic pressing (HIP) technique. During the HIP process, the fuel plate system is heated to 560 °C, then cooled to room temperature. This heat cycle significantly affects the mechanical properties of the aluminum cladding, and experimental investigations have shown that, post-HIP bonding, the mechanical properties of the aluminum cladding transition from those of AA 6061-T6 to something closer to the O temper. More specifically, the ultimate strength of the cladding decreases while its ductility increases, making it challenging to capture the changes in mechanical behavior and material properties. Understanding the residual stresses generated during the HIP process is critical for assessing the fuel plate’s integrity under various temperature, pressure, and irradiation. To simulate the HIP bonding process, the elastic, plastic, and thermal properties of the cladding are assumed to be similar to those of AA 6061-O temper. However, the primary challenge lies in the lack of available data for the creep model of the AA 6061 cladding during this transient process of HIP. The present study focuses on developing a computational model that predicts the creep behavior of the aluminum cladding in the fuel plates during the HIP process, as cladding creep significantly influences the residual stresses generated in U-10Mo fuel plates during HIP fabrication. Furthermore, as HIP bonding occurs at high temperatures that are nearing the melting point of aluminum, the present work considered a temperature-dependent Arrhenius-type creep model. In particular, a hyperbolic sine creep model is employed to estimate the creep properties of the as-fabricated aluminum cladding. In conclusion, the residual stresses predicted in the U-10Mo fuel when using the newly calibrated creep model closely align with the experimental measurements, validating the model’s accuracy.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Tuning Surface Adhesion Using Grayscale Electron-beam Lithography

Surface texturing of manufactured products tailors their properties, such as friction, adhesion, biocompatibility, or fluid interactions. However, advancements in this area are largely the result of trial-and-effort testing and generally lack a science-guided framework for determining the surface topography that will optimize performance. The present investigation explores grayscale electron-beam lithography as a means to create multiscale surface patterns to control surface performance. Here, we created and characterized a set of surface textures on a silicon wafer; the textures were superpositions of sine waves of varying wavelengths and amplitudes. First, the multiscale topography of the patterned surface was characterized, using profilometry and atomic force microscopy, to understand its fidelity to the designed-in pattern. The results of this analysis demonstrated how grayscale lithography accurately controlled the lateral size of features but was less precise on the vertical height of the surface, and also introduced inherent roughness below the scale of patterning. Second, a micromechanical tester was used to characterize the adhesion of the surfaces with large-scale polished silicon spheres. The results showed that adhesion could be tailored, with significant contribution from all of the designed-in length scales of topography. The strength of adhesion did not correlate with conventional roughness parameters but could be accurately modeled using simple numerical integration. Taken together, this investigation demonstrates the promise and challenges of grayscale e-beam lithography with multiscale patterns as a method for the tailoring of surface performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Evaluation of Waveform Profiles for Traveling Wave Ion Mobility Separations in Structures for Lossless Ion Manipulations

Structures for lossless ion manipulations (SLIM) have recently enabled a powerful implementation of traveling wave ion mobility spectrometry (TWIMS) for ultra-high resolution separations. However, optimization of experimental parameters remains challenging. Most TWIMS separations have utilized square-shaped waveforms applied by time-dependent voltage stepping across a repeating sets of electrodes; however, alternative waveforms may provide further improvements to resolution. In this work, we characterize five waveforms (including square and sine) in terms of their transmission efficiency, IMS resolution, and resolving power, and explore the effects of TW amplitude and speed on the performance of each. We found, consistent with previous work, separations were generally improved with higher TW amplitudes, moderately improved by lower speeds (limited by ion ‘surfing’ with the waves), and found decreases in signal intensity at the extremes of operating conditions. The triangle and asymmetric ‘ramp forward’ shaped profiles were found to provide modestly greater resolution and resolving power, an observation we tentatively attribute to their relatively uniform fields and minimal low-field regions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Ion Mobility Separations Using Cocentric Architecture

Ion mobility separations are usually performed in linear channels, which, when extended, can have a large footprint. In this work, we explored the performance of an ion mobility device with a curved architecture which can have a more compact form. The Co-centric Ion Mobility Spectrometer (CIMS) works by manipulating ions between two co-centric surfaces, each containing a serpentine track. The mobility separation inside CIMS is achieved using traveling waveforms (TWs). We initially evaluated the device using ion trajectory simulations using SIMION, which indicated that when ions traveled circularly inside CIMS, they resulted in similar resolving powers and transmitted m/z range as traveling in a straight path in structures for lossless ion manipulations (SLIM). We then performed experimental validation of CIMS in conjunction with a TOF MS. The CIMS was made of 2 flexible printed circuit board materials folded into concentric cylinders separated by a gap of 2.8 mm. The device was about 50 mm diameter × 152 mm long and provided 1.846 m of serpentine path length. Three sets of mixtures (Agilent tune mixture, tetraalkylammonium salts, and 8 peptide mixture) and four traveling waveform profiles (square, sine, triangle, and sawtooth) were used. The sawtooth TW profile produced a slightly higher resolving power for the Agilent tuning mixture and tetraalkylammonium ions. The average resolving power for Agilent tune mixture ions ranged from 37 (using sawtooth TW) to 27 (using square TW). For tetraalkylammonium ions, the average resolving powers ranged from 45 (sawtooth TW) to 31 (square TW). For the peptide mixture ions, the resolving power was similar among the four TW profiles and ranged from 51 to 56. The average percent error in TW CCS for the peptide mixture ions ranged was about 0.4%. In conclusion, the new device showed promising results for a device made of a flexible printed circuit board material, but improvements are needed to further increase the resolving power.

59 BASIC BIOLOGICAL SCIENCES↗