Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solid state device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Probing Dynamic Phase Changes in Electrochemical Systems with Cryogenic and in Situ Analytical Electron Microscopy (Final Technical Report)

In this project, we focus on the advancement of our newly developed, unique in situ and cryogenic analytical electron microscopy (AEM) techniques and the development of additional high-end capabilities to quantitatively elucidate the mechanisms of resistive state changes in solid-state electrochemical materials for non-volatile, neuromorphic memory. The objectives of the proposed research are (1) to characterize and elucidate the mechanisms by which electronic state changes occur in various solid-state devices to build guiding principles for electrochemically activated smart materials; (2) to advance our understanding of such mechanisms by coupling cryogenic and in situ techniques to control kinetics of the observed mechanisms while mitigating probe-induced damage; and (3) to utilize additional advanced techniques including electron-beam induced current and quantum mechanical simulations in order to identify the underlying fundamental science of such processes, including roles of defect formation and its effect on phase nucleation, as well as dynamics of these processes in the electrochemical systems at the nanometer scale.

25 ENERGY STORAGE↗

Kryptonate Hydrogen Detection System (Final Report)

A prototype model of a multipurpose instrument which demonstrates the applicability of the Kryptonate® technique for detecting hydrogen gas was developed. This report describes the construction of the instrument and presents a laboratory evaluation of its performance. Performance was excellent. The instrument was designed to detect hydrogen in air at concentrations of 0-3% by volume, and to detect hydrogen in nitrogen or other inert gas at concentrations of 0-10% by volume. Other detection levels (both higher and lower) could be set if required. Ultimate response times can be made of the order of 0.5 seconds. The instrument is an all solid state device operating from 120V 60 Hz power source. The instrument has been designed to enable modifications to be made with a minimum amount of difficulty.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tailoring coherent charge transport in graphene by deterministic defect generation

Harnessing the wave-nature of charge carriers in solid state devices, electron optics investigates and exploits coherent phenomena, in analogy with optics and photonics. Typically, this requires complex electronic devices leveraging macroscopically coherent charge transport in two-dimensional electron gases and superconductors. Here, collective coherent effects are induced in a simple counterintuitive architecture by defect engineering. Deterministically introduced lattice defects in graphene enable the phase coherent charge transport by playing the role of potential barriers, instead of scattering centres as conventionally considered. Thus, graphene preserves its quasi-ballistic quantum transport and can support phase-matched charge carrier waves. Based on this approach, multiple electronic Fabry-Pèrot cavities are formed by creating periodically alternating defective and pristine nano-stripes through low energy electron-beam irradiation. Indeed, defective stripes behave as partially reflecting mirrors and resonantly confine the charge carrier waves within the pristine areas, giving rise to Fabry-Pèrot resonant modes. These modes experimentally manifest as sheet resistance oscillations, as also confirmed by Landauer-Büttiker simulations. Moreover, these coherent phenomena survive up to 30 K for both polarities of charge carriers, contrarily to traditional monopolar electrostatically created Fabry-Pèrot interferometers. Our study positions defective graphene as an innovative platform for coherent electronic devices, with potential applications in nano and quantum technologies.

Melchioni, Nicola↗

Reliability Assessment of Solid-State Circuit Breakers (CRADA CRD-21-21469, Project 4 Final Report)

Growth in power requirements and the complexity of emerging distribution systems are creating the need for new solid-state products for many applications. The qualification requirements, testing standards and life-cycle management practices of solid-state devices used in protection applications is not established. The project will leverage newly developed accelerated testing capabilities design specifically for protection applications to generate large data sets that will enable advanced digital techniques for data analysis and embedded health monitoring.

14 SOLAR ENERGY↗

Concept for sleeve induction motor with 1-msec mechanical time constant

Conductive sleeve induction motor having a 1-msec mechanical time constant is used with solid-state devices to control all-electric servo power systems. The servomotor rotor inertia is small compared to the maximum force rating of the servo motion, permitting high no-load acceleration.

Wiegand, D. E.↗

High-frequency wattage-to-voltage converter

Solid state device, which measures electric power over a wide frequency range, multiplies two electrical input signals to produce an output voltage that is proportional to their product. Quarter-square type of electronic analog multiplier is used.

Vrancik, J. E.↗

Increasing the response of PIN photodiodes to the ultraviolet

Solid state device uses sapphire windows and avoids coatings which absorb ultraviolet radiation and ultimately alter detector geometry. Ultimate solution for ultraviolet response is geometry with maximum peripheral area and horizontal field structure to draw out photon induced current carriers.

Burrous, C. N.↗

Avalanche diodes for the generation of coherent radiation

Solid state devices and characterization, and optimum imbedding networks for realizing best performance were investigated along with a barrier injection transit time diode. These diodes were investigated for possible application as microwave amplifiers and oscillators. Measurements were made of diode noise figures in the frequency ranges of 4 - 6 GHz. Initial results indicate that a noise figure of 6 - 8 db may be possible. Optimum device structure and fabrication techniques necessary for low noise performance were investigated. Previously published documents on electrodynamics are included.

Penfield, P., Jr.↗

Solid state technology: A compilation

A compilation, covering selected solid state devices developed and integrated into systems by NASA to improve performance, is presented. Data are also given on device shielding in hostile radiation environments.

Source record↗

The solid state remote power controller - Its status, use and perspective

Remote power controllers (RPCs) are solid state devices that combine in one unit the capability to perform all the needed functions of load switching, overload protection, and a direct indication of whether the load is on or off. They provide total system protection of equipment and wires. RPCs are designed to be located near the load and communicate control and status information remotely via low level signals of a few milliwatts. The design and operation of the RPC are considered, taking into account the operation of an RPC, the RPC power switch and drive circuits, control and trip circuits, fail-safe devices, and RPC overcurrent protection. Attention is given to the RPC development status, RPC applications, and RPC perspectives.

Sundberg, G. R.↗

Remote sensing of earth from space: Role of 'smart sensors'; Proceedings of the Conference, Hampton, Va., November 14-16, 1978

The papers in this volume cover a wide range of topics, from user requirements for 'smart' sensors to the development of innovative solid-state devices. By definition, a 'smart' sensor can, by means of its data/information processing capability, extract much more information than a simple sensor from the received physical signals, disregard or discard data with little or no information content, and handle efficiently the large volumes of data to be generated in future spacecraft. User concepts for 'smart' sensors are considered, and the topic of data processing systems is addressed. Attention is given to advanced device technology which brings forth unique device concepts applicable to 'smart' sensors. Also discussed are data preprocessing techniques.

Breckenridge, R. A.↗

Space tubes: A major challenge

The application of the TWT - the backbone of all civilian and military space communication programs - to past, present and future satellites is discussed. Performance characteristics and the trends and challenges in the future are reviewed. Finally, a comparison with Solid States devices, as derived from fundamental laws, is made and limitations discussed.

Kosmahl, H.↗

Space power tubes - very much alive

The application of the traveling wave tubes (TWT), the backbone of all civilian and military space communication programs, to past, present and future satellites is discussed. Performance characteristics and the trends and challenges in the future are reviewed. Finally, a comparison with Solid State devices, as derived from fundamental laws, is made and limitations discussed.

Kosmahl, H. G.↗

The Advanced X-ray Astrophysics Facility instrument interface requirements

A variety of instruments will be placed at the focus of the Advanced X-ray Astrophysics Facility (AXAF) telescope, either by moving them into focus through the use of an instrument carousel or by moving the telescope assembly. Focal plane instrument categories under consideration for AXAF encompass high and moderate resolution X-ray cameras, X-ray spectrometers, and polarimeters; some of these instruments may require such consumables as a cryogen, in the case of solid state device cooling, or a gas, as in the case of proportional counters. Attention is presently given to interface requirements impacting on the maintenance that must be conducted over the 15-year service life of AXAF, and, especially, on the 'aspect solution' criteria that must be met to minimize stiffness stability criteria.

Weisskopf, M. C.↗

On the absence of convective stability in materials preparation on earth

The yield in the production and the performance of electronic and optical solid state devices is frequently limited by nonuniformities in the composition and structure of the underlying crystalline material. The formation of such inhomogeneities can be favored by convective heat and mass transfer during the preparation. Hence, it is often desirable to establish purely diffusive conditions in materials preparation. It has been thought that buoyancy-driven convection can be readily excluded by appropriate orientation of the density gradient with respect to the gravity vector. Such expectations overlook, however, that materials preparation processes are inherently associated with multidimensional density gradients. Hence, it is concluded, there will always be convective contributions to transport in materials processing on earth.

Rosenberger, Franz↗