Search NASA⌕ Search

SEARCH · Search NASA

Results for “Source Recovery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

In situ TEM observation of alpha-particle induced annealing of radiation damage in Durango apatite

A major issue in thermochronology and U-Th-Pb dating is the effect of radiation damage, created by α-recoils from α-decay events, on the diffusion of radiogenic elements (e.g., He and Pb) in host mineral. Up until now, thermal events have been considered as the only source of energy for the recovery of radiation-damage. However, irradiation, such as from the α-particle of the α-decay event, can itself induce damage recovery. Quantification of radiation-induced recovery caused by α-particles during α-decay events has not been possible, as the recovery process at the atomic-scale has been difficult to observe. Here we present details of the dynamics of the amorphous-to-crystalline transition process during α-particle irradiations using in situ transmission electron microscopy (TEM) and consecutive ion-irradiations: 1 MeV Kr 2+ (simulating α-recoil damage), followed by 400 keV He+ (simulating α-particle annealing). Upon the He + irradiation, partial recrystallization of the original, fully-amorphous Durango apatite was clearly evident and quantified based on the gradual appearance of new crystalline domains in TEM images and new diffraction maxima in selected area electron diffraction patterns. Thus, α-particle induced annealing occurs and must be considered in models of α-decay event damage and its effect on the diffusion of radiogenic elements in geochronology and thermochronology.

58 GEOSCIENCES↗

Design, conditioning, and performance of a high voltage, high brightness dc photoelectron gun with variable gap

A new high voltage photoemission gun has been constructed at Cornell University which features a segmented insulator and a movable anode, allowing the cathode-anode gap to be adjusted. In this work, we describe the gun's overall mechanical and high voltage design, the surface preparation of components, as well as the clean construction methods. We present high voltage conditioning data using a 50 mm cathode-anode gap, in which the conditioning voltage exceeds 500 kV, as well as at smaller gaps. Finally, we present simulated emittance results obtained from a genetic optimization scheme using voltage values based on the conditioning data. These results indicate that for charges up to 100 pC, a 30 mm gap at 400 kV has equal or smaller 100% emittance than a 50 mm gap at 450 kV, and also a smaller core emittance, when placed as the source for the Cornell energy recovery linac photoinjector with bunch length constrained to be <3 ps rms. For 100 pC up to 0.5 nC charges, the 50 mm gap has larger core emittance than the 30 mm gap, but conversely smaller 100% emittance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

BEYOND ELLIPSE(S): ACCURATELY MODELING THE ISOPHOTAL STRUCTURE OF GALAXIES WITH ISOFIT AND CMODEL

This work introduces a new fitting formalism for isophotes that enables more accurate modeling of galaxies with non-elliptical shapes, such as disk galaxies viewed edge-on or galaxies with X-shaped/peanut bulges. Within this scheme, the angular parameter that defines quasi-elliptical isophotes is transformed from the commonly used, but inappropriate, polar coordinate to the “eccentric anomaly.” This provides a superior description of deviations from ellipticity, better capturing the true isophotal shape. Furthermore, this makes it possible to accurately recover both the surface brightness profile, using the correct azimuthally averaged isophote, and the two-dimensional model of any galaxy: the hitherto ubiquitous, but artificial, cross-like features in residual images are completely removed. The formalism has been implemented into the Image Reduction and Analysis Facility tasks Ellipse and Bmodel to create the new tasks “Isofit,” and “Cmodel.” The new tools are demonstrated here with application to five galaxies, chosen to be representative case-studies for several areas where this technique makes it possible to gain new scientific insight. Specifically: properly quantifying boxy/disky isophotes via the fourth harmonic order in edge-on galaxies, quantifying X-shaped/peanut bulges, higher-order Fourier moments for modeling bars in disks, and complex isophote shapes. Higher order (n > 4) harmonics now become meaningful and may correlate with structural properties, as boxyness/diskyness is known to do. This work also illustrates how the accurate construction, and subtraction, of a model from a galaxy image facilitates the identification and recovery of over-lapping sources such as globular clusters and the optical counterparts of X-ray sources.

79 ASTRONOMY AND ASTROPHYSICS↗

WPTO Comprehensive References [Poster]

Protecting hydroelectric plants from incidents that adversely impact their cyber-physical systems presents unique challenges due to the plants’ widely dispersed geographic locations and varied configurations as well as the relative nascent nature of the cyberattacks targeting these facilities. To help hydroelectric plants better respond to and mitigate cybersecurity incidents, this Department of Energy Water Power Technologies Office Cyber Comprehensive Reference list is to be used at a hydroelectric plant to quickly go to appropriate sources during the response and recovery of a cyber incident. In addition to this product, there are three other products meant to be distributed to a hydroelectric plant to assist in their cyber incident response and recovery. The first, a report on the processes of building a R&R flip book based on a large set of existing guidance. The second, a handy flip book meant to be distributed to hydroelectric plants to assist them during a cybersecurity incident occurring on a hydroelectic plant. And the third is a correlated alignment of the steps an hydroelectric plant operator would take for both a cyber incident as well as an emergency response process if the event rises to a cyber incident affecting the safe and reliable operations of a hydroelectric plant.

13 HYDRO ENERGY↗

Future Synchrotron Light Sources Based on Ultimate Storage Rings

The main purpose of this talk is to describe how far one might push the state of the art in storage ring design. The talk will start with an overview of the latest developments and advances in the design of synchrotron light sources based on the concept of an 'ultimate' storage ring. The review will establish how bright a ring based light source might be, where the frontier of technological challenges are, and what the limits of accelerator physics are. Emphasis will be given to possible improvements in accelerator design and developments in technology toward the goal of achieving an ultimate storage ring. An ultimate storage ring (USR), defined as an electron ring-based light source having an emittance in both transverse planes at the diffraction limit for the range of X-ray wavelengths of interest for a scientific community, would provide very high brightness photons having high transverse coherence that would extend the capabilities of X-ray imaging and probe techniques beyond today's performance. It would be a cost-effective, high-coherence 4th generation light source, competitive with one based on energy recovery linac (ERL) technology, serving a large number of users studying material, chemical, and biological sciences. Furthermore, because of the experience accumulated over many decades of ring operation, it would have the great advantage of stability and reliability. In this paper we consider the design of an USR having 10-pm-rad emittance. It is a tremendous challenge to design a storage ring having such an extremely low emittance, a factor of 100 smaller than those in existing light sources, especially such that it has adequate dynamic aperture and beam lifetime. In many ultra-low emittance designs, the injection acceptances are not large enough for accumulation of the electron beam, necessitating on-axis injection where stored electron bunches are completely replaced with newly injected ones. Recently, starting with the MAX-IV 7-bend achromatic cell, we have made significant progress with the design of PEP-X, a USR that would inhabit the decommissioned PEP-II tunnel at SLAC. The enlargement of the dynamic aperture is largely a result of the cancellations of the 4th-order resonances in the 3rd-order achromats and the effective use of lattice optimization programs. In this paper, we will show those cancellations of the 4th-order resonances using an analytical approach based on the exponential Lie operators and the Poisson brackets. Wherever possible, our analytical results will be compared with their numerical counterparts. Using the derived formulae, we will construct 4th-order geometric achromats and use them as modules for the lattice of the PEP-X USR, noting that only geometric terms are canceled to the 4th order.

43 PARTICLE ACCELERATORS↗

Hydrocarbon Recovery from Williston Basin Shale and Mudrock Cores with Supercritical CO 2 : 2. Mechanisms That Control Oil Recovery Rates and CO 2 Permeation

In part 1 (10.1021/acs.energyfuels.9b01177), CO2 was used to recover oil from 51 source shale and reservoir mudrock cores collected from the Bakken Petroleum System in the Williston Basin. Oil hydrocarbon recoveries after 24 hexposures to CO2 at reservoir pressure and temperature were >94% for the reservoir mudrock cores and ranged from a few percent to as much as 80% for the source shales depending on the well location. In part 2, the experimental parameters that control oil recoveries were investigated, and the results show that exposed rock surface areas and CO2 contact times are primary factors controlling oil recovery at reservoir temperature and pressure. Compared to the 11.2 mm diameter rods used in part 1,increasing the surface area by splitting the rods into a stack of 2−3 mm thick “coins” doubled the oil recovery rates from both reservoir and source rocks, while further increasing the surface area using ground and sieved 1−3.4 mm samples at least tripledrecovery rates. In addition, extending the exposure time for the 11.2 mm diameter source shale rods to 96 h yielded nearly complete oil recoveries (as did the 24 h exposures with the 1−3.4 mm samples), indicating that pore spaces in the source shales as well as the more permeable reservoir rocks can be accessed by the CO2 and the associated oil hydrocarbons recovered. Higher CO 2 pressures yielded higher oil recoveries from both the reservoir rocks and source shales regardless of whether the exposure pressure was at or a little below, somewhat above, or substantially above the minimum miscibility pressure (MMP).Laboratory experiments also demonstrated that crude oil recoveries are based primarily on the ability of the CO 2 to penetrate the rock matrix and dissolve the oil hydrocarbons via hydrocarbon vaporization into the CO 2 phase rather than bulk physical processes (e.g., swelling, lowered viscosity, the physical “sweeping” effect) that are important in conventional CO 2 floods. Lighter hydrocarbons (e.g., C7 to C14) were recovered at much faster rates than heavier hydrocarbons (e.g., >C20) from all rock samples and geometries as well as for all CO2 pressures tested, as might be expected because lighter hydrocarbons have both higher diffusion coefficients and higher solubilities in CO 2 than heavier hydrocarbons. Limiting the amount of CO2 had little or no effect on the recovery rates of the lighter hydrocarbons but greatly reduced those of the heavier hydrocarbons. These two observations are consistent with a concentration-gradient-driven diffusion recovery mechanism. Laboratory results suggest that oil recovery in the Bakken play with CO2 will be enhanced by longer soak times, larger exposed rock surface areas, and higher pressures.

Energy & Fuels↗

Science Requirements and Conceptual Design for a Polarized Medium Energy Electron-Ion Collider at Jlab

Researchers have envisioned an electron-ion collider with ion species up to heavy ions, high polarization of electrons and light ions, and a well-matched center-of-mass energy range as an ideal gluon microscope to explore new frontiers of nuclear science. In its most recent Long Range Plan, the Nuclear Science Advisory Committee (NSAC) of the US Department of Energy and the National Science Foundation endorsed such a collider in the form of a &#x27;half-recommendation.&#x27; As a response to this science need, Jefferson Lab and its user community have been engaged in feasibility studies of a medium energy polarized electron-ion collider (MEIC), cost-effectively utilizing Jefferson Lab&#x27;s already existing Continuous Electron Beam Accelerator Facility (CEBAF). In close collaboration, this community of nuclear physicists and accelerator scientists has rigorously explored the science case and design concept for this envisioned grand instrument of science. An electron-ion collider embodies the vision of reaching the next frontier in Quantum Chromodynamics - understanding the behavior of hadrons as complex bound states of quarks and gluons. Whereas the 12 GeV Upgrade of CEBAF will map the valence-quark components of the nucleon and nuclear wave functions in detail, an electron-ion collider will determine the largely unknown role sea quarks play and for the first time study the glue that binds all atomic nuclei. The MEIC will allow nuclear scientists to map the spin and spatial structure of quarks and gluons in nucleons, to discover the collective effects of gluons in nuclei, and to understand the emergence of hadrons from quarks and gluons. The proposed electron-ion collider at Jefferson Lab will collide a highly polarized electron beam originating from the CEBAF recirculating superconducting radiofrequency (SRF) linear accelerator (linac) with highly polarized light-ion beams or unpolarized light- to heavy-ion beams from a new ion accelerator and storage complex. Since the very beginning, the design studies at Jefferson Lab have focused on achieving high collider performance, particularly ultrahigh luminosities up to 10{sup 34} cm{sup -2}s{sup -1} per detector with large acceptance, while maintaining high polarization for both the electron and light-ion beams. These are the two key performance requirements of a future electron-ion collider facility as articulated by the NSAC Long Range Plan. In MEIC, a new ion complex is designed specifically to deliver ion beams that match the high bunch repetition and highly polarized electron beam from CEBAF. During the last two years, both development of the science case and optimization of the machine design point toward a medium-energy electron-ion collider as the topmost goal for Jefferson Lab. The MEIC, with relatively compact collider rings, can deliver a luminosity above 10{sup 34} cm{sup -2}s{sup -1} at a center-of-mass energy up to 65 GeV. It offers an electron energy up to 11 GeV, a proton energy up to 100 GeV, and corresponding energies per nucleon for heavy ions with the same magnetic rigidity. This design choice balances the scope of the science program, collider capabilities, accelerator technology innovation, and total project cost. An energy upgrade could be implemented in the future by adding two large collider rings housed in another large tunnel to push the center-of-mass energy up to or exceeding 140 GeV. After careful consideration of an alternative electron energy recovery linac on ion storage ring approach, a ring-ring collider scenario at high bunch repetition frequency was found to offer fully competitive performance while eliminating the uncertainties of challenging R&D on ampere-class polarized electron sources and many-pass energy-recovery linacs (ERLs). The essential new elements of an MEIC facility at Jefferson Lab are an electron storage ring and an entirely new, modern ion acceleration and storage complex. For the high-current electron collider ring, the upgraded 12 GeV CEBAF SRF linac will serve as a full-energy injector, and, if needed, provide top-off refilling. The CEBAF fixed-target nuclear physics program can be simultaneously operated since the filling time of the electron ring is very short. The ion complex for MEIC consists of sources for polarized light ions and unpolarized light to heavy ions, an SRF ion linac with proton energy up to 280 MeV, a 3 GeV prebooster synchrotron, a large booster synchrotron for proton energy up to 20 GeV, and a medium-energy collider ring with energy up to 100 GeV. The ion complex can accelerate other species of ions with corresponding energies at each accelerating stage. There are three collision points planned for MEIC. Two of them are for collisions with medium-energy ions; the third is for low energy ion beams stored in a dedicated low-energy compact storage ring, as a possible follow-on project.

43 PARTICLE ACCELERATORS↗

Decomposing Fuel Economy and Greenhouse Gas Regulatory Standards in the Energy Conversion Efficiency and Tractive Energy Domain

The three foundational elements that determine mobile source energy use and tailpipe carbon dioxide (CO2) emissions are the tractive energy requirements of the vehicle, the on-cycle energy conversion efficiency of the propulsion system, and the energy source. The tractive energy requirements are determined by the vehicle's mass, aerodynamic drag, tire rolling resistance, and parasitic drag. Oncycle energy conversion of the propulsion system is dictated by the tractive efficiency, non-tractive energy use, kinetic energy recovery, and parasitic losses. The energy source determines the mobile source CO2 emissions. For current vehicles, tractive energy requirements and overall energy conversion efficiency are readily available from the decomposition of test data. For future applications, plausible levels of mass reduction, aerodynamic drag improvements, and tire rolling resistance can be transposed into the tractive energy domain. Similarly, by combining thermodynamic, mechanical efficiency, and kinetic energy recovery fundamentals with logical proxies, achievable levels of energy conversion efficiency can be established to allow for the evaluation of future powertrain requirements. Combining the plausible levels of tractive energy and on-cycle efficiency provides a means to compute sustainable vehicle and propulsion system scenarios that can achieve future regulations. Using these principles, the regulations established in the United States (U.S.) for fuel consumption and CO2 emissions are evaluated. Fleet-level scenarios are generated and compared to the technology deployment assumptions made during rule-making. When compared to the rule-making assumptions, the results indicate that a greater level of advanced vehicle and propulsion system technology deployment will be required to achieve the model year 2025 U.S. standards for fuel economy and CO2 emissions.

CAFE↗

Case Study in Corporate Memory Recovery: Hanford Tank Farms Miscellaneous Underground Waste Storage Tanks - 15344

In addition to managing the 177 underground waste storage tanks containing 212,000 m3 (56 million gal) of radioactive waste at the U. S. Department of Energy’s Hanford Site 200 Area Tank Farms, Washington River Protection Solutions LLC is responsible for managing numerous small catch tanks and special surveillance facilities. These are collectively known as “MUSTs” - Miscellaneous Underground Storage Tanks. The MUSTs typically collected drainage and flushes during waste transfer system piping changes; special surveillance facilities supported Tank Farm processes including post-World War II uranium recovery and later fission product recovery from tank wastes. Most were removed from service following deactivation of the single-shell tank system in 1980 and stabilized by pumping the remaining liquids from them. The MUSTs were isolated by blanking connecting transfer lines and adding weatherproofing to prevent rainwater entry. Over the next 30 years MUST operating records were dispersed into large electronic databases or transferred to the National Archives Regional Center in Seattle, Washington. During 2014 an effort to reacquire the historical bases for the MUSTs’ published waste volumes was undertaken. Corporate Memory Recovery from a variety of record sources allowed waste volumes to be initially determined for 21 MUSTs, and waste volumes to be adjusted for 37 others. Precursors and symptoms of Corporate Memory Loss were identified in the context of MUST records recovery.

Washenfelder, D. J.↗

Case study in corporate memory recovery: Hanford tank farms miscellaneous underground waste storage tanks - 15344

In addition to managing the 177 underground waste storage tanks containing 212,000 m{sup 3} (56 million gal) of radioactive waste at the U. S. Department of Energy's Hanford Site 200 Area Tank Farms, Washington River Protection Solutions LLC is responsible for managing numerous small catch tanks and special surveillance facilities. These are collectively known as 'MUSTs' - Miscellaneous Underground Storage Tanks. The MUSTs typically collected drainage and flushes during waste transfer system piping changes; special surveillance facilities supported Tank Farm processes including post-World War II uranium recovery and later fission product recovery from tank wastes. Most were removed from service following deactivation of the single-shell tank system in 1980 and stabilized by pumping the remaining liquids from them. The MUSTs were isolated by blanking connecting transfer lines and adding weatherproofing to prevent rainwater entry. Over the next 30 years MUST operating records were dispersed into large electronic databases or transferred to the National Archives Regional Center in Seattle, Washington. During 2014 an effort to re-acquire the historical bases for the MUSTs' published waste volumes was undertaken. Corporate Memory Recovery from a variety of record sources allowed waste volumes to be initially determined for 21 MUSTs, and waste volumes to be adjusted for 37 others. Precursors and symptoms of Corporate Memory Loss were identified in the context of MUST records recovery. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

FAINT SUBMILLIMETER GALAXY COUNTS AT 450 {mu}m

We present the results of SCUBA-2 observations at 450 {mu}m and 850 {mu}m of the field lensed by the massive cluster A370. With a total survey area >100 arcmin{sup 2} and 1{sigma} sensitivities of 3.92 and 0.82 mJy beam{sup -1} at 450 and 850 {mu}m, respectively, we find a secure sample of 20 sources at 450 {mu}m and 26 sources at 850 {mu}m with a signal-to-noise ratio (S/N) > 4. Using the latest lensing model of A370 and Monte Carlo simulations, we derive the number counts at both wavelengths. The 450 {mu}m number counts probe a factor of four deeper than the counts recently obtained from the Herschel Space Telescope at similar wavelengths, and we estimate that {approx}47%-61% of the 450 {mu}m extragalactic background light resolved into individual sources with 450 {mu}m fluxes greater than 4.5 mJy. The faint 450 {mu}m sources in the 4{sigma} sample have positional accuracies of 3 arcsec, while brighter sources (S/N >6{sigma}) are good to 1.4 arcsec. Using a deep radio map (1{sigma} {approx} 6 {mu}Jy) we find that the percentage of submillimeter sources having secure radio counterparts is 85% for 450 {mu}m sources with intrinsic fluxes >6 mJy and 67% for 850 {mu}m sources with intrinsic fluxes >4 mJy. We also find that 67% of the >4{sigma} 450 {mu}m sources are detected at 850 {mu}m, while the recovery rate at 450 {mu}m of >4{sigma} 850 {mu}m sources is 54%. Combined with the source redshifts estimated using millimetric flux ratios, the recovered rate is consistent with the scenario where both 450 {mu}m and 20 cm emission preferentially select lower redshift dusty sources, while 850 {mu}m emission traces a higher fraction of dusty sources at higher redshifts. We identify potential counterparts in various wavelengths from X-ray to mid-infrared and measure the multiwavelength photometry, which we then use to analyze the characteristics of the sources. We find three X-ray counterparts to our robust submillimeter sample (S/N > 5), giving an active galactic nucleus fraction for our 450 (850) {mu}m sample of 3/8 (3/9) or 38% (33%). We also find a correlation between the K{sub s} band and the 850 {mu}m/20 cm flux ratio.

79 ASTRONOMY AND ASTROPHYSICS↗

Recovery of active recombinant EGFP from the excrement of transgenic mice: A possible source of recombinant protein

Transgenic animals provide attractive systems for the production of valuable recombinant proteins. Previous studies indicate that milk is a suitable source of secreted recombinant proteins. In the current study, we examine whether excrement can be another source of recombinant proteins by using transgenic mice ubiquitously-expressing green fluorescent protein (GFP) as a model. We found that the surface of excrement from GFP-transgenic mice was fluorescent, and the supernatant after centrifugation of an excrement suspension was rich in undegraded, actively fluorescing GFP. GFP was successfully purified from stool as a fluorescent 27 kDa protein by using a common procedure. Finally, we observed that the fluorescence of digested materials began in the ileum and persisted throughout the remainder of the digestive tract. Our results demonstrate that excrement, which is produced daily regardless of the sex or age of the animal, may be another feasible source of recombinant proteins. The preparation method is simple, economical, and noninvasive.

60 APPLIED LIFE SCIENCES↗

MBMS1.0: An Open-Source Code for Modeling and Simulation of Membrane-Based Dehumidification and Energy Recovery

Air dehumidification processes are important and significantly impact both the performance of building ventilation and air conditioning systems, and the health of occupants. In a membrane-based dehumidifier, a permselective membrane is adopted to separate the two flow streams at feed and permeate sides. The feed side is continuously supplied with humid air at atmospheric pressure, while the permeate side is connected to a vacuum pump to produce vacuum or a low permeate vapor pressure as a driving force for water vapor permeation. The software MBMS 1.0 enables modeling and simulation of the design and configuration optimization of a membrane-based air-to-air (A2A) or air-to-vapor (A2V) device. A first-order physical-constant model was developed to reasonably account for the fundamental heat and mass transfer processes involved.

Gao, Zhiming↗

OzDES Reverberation Mapping Program: Stacking analysis with Hβ, Mg ii , and C iv

ABSTRACT Reverberation mapping is the leading technique used to measure direct black hole masses outside of the local Universe. Additionally, reverberation measurements calibrate secondary mass-scaling relations used to estimate single-epoch virial black hole masses. The Australian Dark Energy Survey (OzDES) conducted one of the first multi-object reverberation mapping surveys, monitoring 735 AGN up to z ∼ 4, over 6 years. The limited temporal coverage of the OzDES data has hindered recovery of individual measurements for some classes of sources, particularly those with shorter reverberation lags or lags that fall within campaign season gaps. To alleviate this limitation, we perform a stacking analysis of the cross-correlation functions of sources with similar intrinsic properties to recover average composite reverberation lags. This analysis leads to the recovery of average lags in each redshift-luminosity bin across our sample. We present the average lags recovered for the Hβ, Mg ii, and C iv samples, as well as multiline measurements for redshift bins where two lines are accessible. The stacking analysis is consistent with the Radius–Luminosity relations for each line. Our results for the Hβ sample demonstrate that stacking has the potential to improve upon constraints on the R–L relation, which have been derived only from individual source measurements until now.

79 ASTRONOMY AND ASTROPHYSICS↗

A Fundamental Economic Assessment of Recovering Rare Earth Elements and Critical Minerals from Acid Mine Drainage Using a Network Sourcing Strategy

In recent years, acid mine drainage (AMD) has emerged as a promising unconventional source of rare earth elements (REEs) and other critical minerals (CMs) such as cobalt and manganese. In this regard, AMD provides a natural heap leaching effect that extracts and concentrates REE/CM from the host strata creating a partially enriched feedstock suitable for downstream extraction, separation, and recovery. While several prior studies have described processes and approaches for the valorization of AMD, very few have described the supply chain and infrastructure requirements as well as the associated economic assessment. To that end, this paper provides a fundamental economic assessment of REE/CM recovery from AMD using a network sourcing strategy in addition to a robust, flexible feedstock separations and refining facility. The methodology of this paper follows that of a typical techno-economic analysis with capital and operating costs estimated using AACE Class IV (FEL-2) guidelines. To demonstrate the range of possible outcomes, four pricing scenarios were modeled including contemporary prices (September, 2021) as well as the minimum and maximum prices over the last decade. In addition, five production scenarios were considered reflecting variations in the product suite, ranging from full elemental separation to magnet REE and CM production only (i.e., Pr, Nd, Tb, Dy, Y, Sc, Co, and Mn). The results of this analysis show that, with the exception of the minimum price scenario, all operational configurations have positive economic indicators with rates of return varying from 25% to 32% for the contemporary price scenario. The optimal configuration was determined to be production of Co, Mn, and all REEs except for mischmetal, which is not recovered. Sensitivity analysis and Monte Carlo simulation show that capital cost and HCl consumption are the two major factors influencing rate of return, thus indicating opportunities for future technology development and cost optimization. Implications of the study and a cooperative profit-sharing model for sourcing are also described.

42 ENGINEERING↗

Web-GIS oriented systems viability for municipal solid waste selective collection optimization in developed and transient economies

Highlights: ► As an appropriate solution for MSW management in developed and transient countries. ► As an option to increase the efficiency of MSW selective collection. ► As an opportunity to integrate MSW management needs and services inventories. ► As a tool to develop Urban Mining actions. - Abstract: Municipal solid waste management is a multidisciplinary activity that includes generation, source separation, storage, collection, transfer and transport, processing and recovery, and, last but not least, disposal. The optimization of waste collection, through source separation, is compulsory where a landfill based management must be overcome. In this paper, a few aspects related to the implementation of a Web-GIS based system are analyzed. This approach is critically analyzed referring to the experience of two Italian case studies and two additional extra-European case studies. The first case is one of the best examples of selective collection optimization in Italy. The obtained efficiency is very high: 80% of waste is source separated for recycling purposes. In the second reference case, the local administration is going to be faced with the optimization of waste collection through Web-GIS oriented technologies for the first time. The starting scenario is far from an optimized management of municipal solid waste. The last two case studies concern pilot experiences in China and Malaysia. Each step of the Web-GIS oriented strategy is comparatively discussed referring to typical scenarios of developed and transient economies. The main result is that transient economies are ready to move toward Web oriented tools for MSW management, but this opportunity is not yet well exploited in the sector.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rare earth element extraction from pretreated bastnäsite in supercritical carbon dioxide

Rare earth elements are a critical component in many clean energy technologies. Extraction of individual rare earth elements from natural ores or recycled material is challenging due to the very similar chemical properties across the lanthanide series. Supercritical carbon dioxide has emerged in recent years as a possible extraction medium for rare earth elements, due to its tunability and selectivity as a solvent. In this study, rare earth elements were recovered from bastnäsite concentrate using supercritical carbon dioxide extraction with nitric acid/tributyl phosphate adducts. Two bastnäsite pretreatment methods were used to render the rare earth elements amenable to recovery: 1) dry roasting of the source material at 730 °C for 3 hours, and 2) decomposition with 50% sodium hydroxide solution at 150 °C for 4 hours. These pretreated powder samples were extracted in supercritical carbon dioxide at 34 MPa and 65 °C, with kinetic samples obtained at 15-30 minute intervals. A range of tributyl phosphate/nitric acid adduct compositions (from 2 mol/L H + to 6 mol/L H + ) were used in order to determine the effect of adduct composition on recovery rate. The results showed the fastest extraction with an adduct containing approximately 4 M HNO 3 . Adducts with higher acidity showed reduced extraction of cerium, praseodymium, and neodymium. This could be due to the formation of aqueous droplets which dissolve rare earth elements and create an equilibrium limitation, or due to competition between the rare earth nitrates and nitric acid for coordination with tributyl phosphate. Extraction with various adduct concentrations in supercritical CO 2 showed the expected increase in reaction rate with increased adduct concentration. For the 4 mol/L H + adduct at 5.0 mol% adduct concentration, roasted bastnäsite recoveries were 72% for La, 96% for Ce, 88% for Pr, and 90% for Nd after 120 minutes. For 4 mol/L H + adduct at 5.1 mol% adduct concentration, NaOH digested bastnäsite recoveries were 93% for La, 100% for Ce, 99% for Pr, and 101% for Nd after 90 minutes. In conclusion, though further research is needed, these results are a key step in demonstrating applicability of supercritical extraction to rare earth element ores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗