A new laser-ranged satellite for General Relativity and space geodesy: III. De Sitter effect and the LARES 2 space experiment
Explore the source record for details and available documents.
Ignazio Ciufolini↗
SEARCH · Search NASA
Results for “Space experiment”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Modal survey testing of the Lidar In-space Technology Experiment (LITE) - A Space Shuttle payload
This paper presents the results of the modal survey test of the Lidar In-space Technology Experiment (LITE), a Space Shuttle payload mounted in a Spacelab flight single pallet. The test was performed by the Dynamics Test Branch at Marshall Space Flight Center, AL and run in two phases. In the first phase, an unloaded orthogrid connected to the pallet with 52 tension struts was tested. This test included 73 measurement points in three directions. In the second phase, the pallet was integrated with mass simulators mounted on the flight support structure to represent the dynamics (weight and center of gravity) of the various components comprising the LITE experiment and instrumented at 213 points in 3 directions. The test article was suspended by an air bag system to simulate a free-free boundary condition. This paper presents the results obtained from the testing and analytical model correlation efforts. The effect of the suspension system on the test article is also discussed.
Anderson, J. B.↗
Preparation of guinea pig macrophage for electrophoretic experiments in space
Methods of storage and cultivation of macrophage cells in preparation for space experiments were investigated. Results show that freezing and thawing immediately after extraction did not cause any change in viability or electrophoretic mobility of the cells. A prolonged storage at -80 C did cause cell damage as indicated by a 95% reduction in variable cells. Cell damage was decreased when Glycerol or Dimethyl Sulfoxide (DMSO) was added as a cryogenic protective agent. A 100% viability was observed in cultivation experiments after two weeks due to the additional serum. Results from gamma-glutamyl transpeptidase study showed a zero activity rate. It is suggested that a flat stationary field be used for the collection and use of macrophage. It was found that a 24-hour delay in obtaining macrophage cells helps to maintain a pure culture.
Source record↗
Critical velocity experiments in space
Published data from active space experiments designed to demonstrate the Alfven critical-velocity effect are compiled in graphs and compared with the predictions of numerical simulations. It is found that the discrepancies in the ionization yields obtained in shaped-charge releases of alkali metals are related to the macroscopic limits of time and energy in such releases. It is argued that the total ionization yield is an inadequate measure of the critical-velocity effect, and a new criterion based on eta, the efficiency of energy transfer from the recently ionized neutrals to a heated electron population, is proposed: the effect would be verified if eta values of 10 percent or greater were observed.
Torbert, R. B.↗
Space Technology Experiment Platform (STEP). A Shuttle-borne support facility for structures, structural dynamics, and control technology flight experiments
The Space Transportation System (STS) is used for technology experiments in space. The Space Technology Experiment Platform (STEP) is a Shuttle-borne experiment support facility for use by structures, structural dynamics, and controls technology flight experiments. STEP represents a key element in the commitment to STS utilization. The STEP concept and definition process is discussed, and the results obtained to date on the configuration and function capability are summarized, and preliminary schedule information is presented.
Harris, J. E.↗
Large deployable antenna flight experiment for the Space Technology Experiments Platform (STEP)
Spaceborne experiments to test the deployment reliability of large space antennas are discussed. Retraction, reflector surface tolerance, thermal distortion, electromagnetic performance, and dynamic controls are discussed.
Tankersly, B. C.↗
System level verification applying the Space Shuttle experience to the Space Station
The applicability of the verification process for the Shuttle guidance, navigation and control (GNC) and data management system (DMS) for the development of the Space Station are described. Shuttle avionics hardware/software integration was delayed to finalize the hardware design before detailed definition and testing of the software. A block diagram is provided of the flight simulation laboratory used to test the GNC programs before flight data were available. The Station will have distributed computers, unlike the Orbiter, and will only be assembled fully in space. Standardized integration simulation test equipment are being defined to guide the development of hardware and software. The simulation capability may become part of nominal in-flight operations to initiate new capabilities as they are added to the Station. The Station GNC and DMS systems development will be somewhat simplified relative to those of the Shuttle because ascent and reentry will not be considered for the Station.
Gilbert, David W.↗
A Hardware and Software Perspective of the Fifth Materials on the International Space Station Experiment (MISSE-5)
Conducting space experiments with small budgets is a fact of life for many design groups with low-visibility science programs. One major consequence is that specialized space grade electronic components are often too costly to incorporate into the design. Radiation mitigation now becomes more complex as a result of being restricted to the use of commercial off-the-shelf (COTS) parts. Unique hardware and software design techniques are required to succeed in producing a viable instrument suited for use in space. This paper highlights some of the design challenges and associated solutions encountered in the production of a highly capable, low cost space experiment package.
Krasowski, Michael↗
The Ruggedized STD Bus Microcomputer - A low cost computer suitable for Space Shuttle experiments
Previous space flight computers have been costly in terms of both hardware and software. The Ruggedized STD Bus Microcomputer is based on the commercial Mostek/Pro-Log STD Bus. Ruggedized PC cards can be based on commercial cards from more than 60 manufacturers, reducing hardware cost and design time. Software costs are minimized by using standard 8-bit microprocessors and by debugging code using commercial versions of the ruggedized flight boards while the flight hardware is being fabricated.
Budney, T. J.↗
Selected examples for space manufacturing processes, facilities, and experiments
Space manufacturing processes based on potential and limitations of g-environment
Steurer, W. H.↗
MISSE 5 Thin Films Space Exposure Experiment
The Materials International Space Station Experiment (MISSE) is a set of space exposure experiments using the International Space Station (ISS) as the flight platform. MISSE 5 is a co-operative endeavor by NASA-LaRC, United Stated Naval Academy, Naval Center for Space Technology (NCST), NASA-GRC, NASA-MSFC, Boeing, AZ Technology, MURE, and Team Cooperative. The primary experiment is performance measurement and monitoring of high performance solar cells for U.S. Navy research and development. A secondary experiment is the telemetry of this data to ground stations. A third experiment is the measurement of low-Earth-orbit (LEO) low-Sun-exposure space effects on thin film materials. Thin films can provide extremely efficacious thermal control, designation, and propulsion functions in space to name a few applications. Solar ultraviolet radiation and atomic oxygen are major degradation mechanisms in LEO. This paper is an engineering report of the MISSE 5 thm films 13 months space exposure experiment.
Harvey, Gale A.↗
The isothermal dendritic growth experiment - A USMP-2 space flight experiment
The NASA Isothermal Dendritic Growth Experiment (IDGE), which is to be performed on three of the U.S. Microgravity Payload flights, is discussed. IDGE is designed to investigate dendritic growth under microgravity. The theory of dendritic growth and the effects of gravity on it are reviewed, and the IDGE experimental apparatus, design, and ground-based tests are discussed.
Glicksman, M. E.↗
Scientific basis for the Isothermal Dendritic Growth Experiment - A USMP-2 space flight experiment
NASA has planned three flight experiments, designated as the Isothermal Dendritic Growth Experiment (IDGE), to be performed on three of the United States Microgravity Payload (USMP) flights. IDGE is designed to provide microgravity data on dendritic growth for a critical test of theory. Terrestrial gravity, g sub 0, and the associated phenomenon of buoyancy driven convection, prevent a truly quantitative test of pure, diffusocapillary dendritic growth theory. However, recent theoretical analysis provides a fluid mechanics framework for estimating the effects of reduced gravity on the dendritic solidification of pure succinonitrile (SCN), the model material selected for the first IDGE flight. The results (dendritic tip radii and velocities) of the recent fully integrated ground-based tests on the IDGE prototype engineering hardware is in general agreement with the 'historical' ground based data for SCN. At undercoolings of 0.5 K or less, a microgravity environment of approximately 10 exp -3 g sub 0 or lower would have a significant difference from the g sub 0 dendritic growth of SCN.
Glicksman, M. E.↗
The SPAce Readiness Coherent Lidar Experiment (SPARCLE) Space Shuttle Mission
For over 20 years researchers have been investigating the feasibility of profiling tropospheric vector wind velocity from space with a pulsed Doppler lidar. Efforts have included theoretical development, system and mission studies, technology development, and ground-based and airborne measurements. Now NASA plans to take the next logical step towards enabling operational global tropospheric wind profiles by demonstrating horizontal wind measurements from the Space Shuttle in early 2001 using a coherent Doppler wind lidar system.
Kavaya, Michael J.↗
Materials Processing in Space: Model Experiments aboard the International Space Station
Direct observation of fluid flow, bubble movement and solidification during controlled melting and solidification of succinonitrile were conducted in the glovebox facility of the International Space Station (ISS). The samples were processed in the Pore Formation and Mobility Investigation (PFMI) apparatus in the glovebox facility (GBX) on board the ISS. Experimental processing parameters of temperature gradient and translation speed, as well as camera settings, were remotely monitored and manipulated from the ground Telescience Center (TSC) at the Marshall Space Flight Center. Real time visualization of the controlled directional melt back and resolidification reveals a number of microgravity dependent phenomena otherwise masked by Earth s gravity. These and some initial analysis of the observed events is presented.
Grugel, Richard↗
Vented Tank Resupply Experiment (VTRE) for In-space Technology Experiment Program (IN-STEP)
An overview of the Vented Tank Resupply Experiment (VTRE) program is presented in outline and graphical form. The goal of the program is to develop, design, build and provide flight and post flight support for a Shuttle Hitchhiker Experiment to investigate and demonstrate vented tank venting in space. Program schedules and experiment subsystem schematics are presented and specific technical objectives, power requirements, payload assemblies, Hitchhiker canister integration, and orbiter mission approach are addressed.
Source record↗
Space Technology Experiments Platform (STEP) Status: an In-space Test Facility
Designed for utilization of the space transportation system for technology experiments in space, the space technology experiment platform (STEP) is a shuttle-borne experiment support facility for use primarily for structures, structural dynamics, and control flexible structures technology flight experiments. The STEP concept is discussed as well as shows its relationship to broad NASA goals and objectives. The development chronology is presented and the current system capability in block diagram format is described. The STEP development schedule is included.
Harris, J. E.↗