SEARCH · Search NASA

Results for “Stability and transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Stability of boundary layers with porous suction strips: Experiment and theory

Low turbulence tunnel experiments on the stability and transition of 2 D boundary layers on flat plates with and without suction are described. A number of general suction cases are discussed. Test results showed that the maximum stabilization occurred when the suction was moved toward the Branch I neutral point. An analytical study of the stability of two dimensional, incompressible boundary layer flows over plates with suction through porous strips was performed. The mean flow was calculated using linearized triple deck, closed form solutions. The stability results of the triple deck theory are shown to be in good agreement with those of the interacting boundary layers. An analytical optimization scheme for the suction configuration was developd. Numerical calculations were performed corresponding to the experimental configurations. In each case, the theory correctly predicts the experimental results.

Reynolds, G. A.↗

NASA NTRS1987

Three-dimensional stability of boundary layers

The most recent efforts on the stability and transition of three-dimensional flows are reviewed. These include flows over swept wings, rotating disks, rotating cones, yawed bodies, corners, and attachment lines. The generic similarities of their stability behavior is discussed. It is shown that the breakdown process is very complex, often leading to contradictory results. Particular attention is paid to opposing observations of stationary and traveling wave disturbances.

Saric, William S.↗

NASA NTRS1994

Quiet Supersonic Wind Tunnel Development

The ability to control the extent of laminar flow on swept wings at supersonic speeds may be a critical element in developing the enabling technology for a High Speed Civil Transport (HSCT). Laminar boundary layers are less resistive to forward flight than their turbulent counterparts, thus the farther downstream that transition from laminar to turbulent flow in the wing boundary layer is extended can be of significant economic impact. Due to the complex processes involved experimental studies of boundary layer stability and transition are needed, and these are performed in "quiet" wind tunnels capable of simulating the low-disturbance environment of free flight. At Ames, a wind tunnel has been built to operate at flow conditions which match those of the HSCT laminar flow flight demonstration 'aircraft, the F-16XL, i.e. at a Mach number of 1.6 and a Reynolds number range of 1 to 3 million per foot. This will allow detailed studies of the attachment line and crossflow on the leading edge area of the highly swept wing. Also, use of suction as a means of control of transition due to crossflow and attachment line instabilities can be studied. Topics covered include: test operating conditions required; design requirements to efficiently make use of the existing infrastructure; development of an injector drive system using a small pilot facility; plenum chamber design; use of computational tools for tunnel and model design; and early operational results.

King, Lyndell S.↗

NASA NTRS1990

Suggested future directions in high-speed transition experimental research

Historical developments in the area of high-speed experimental transition research are outlined, and future directions in this area as determined by the panel membership are listed. The directions include measurement and modeling of initial disturbance fields, both in ground facilities and flight, for all modes; development of advanced high-speed instrumentation for disturbance field measurements, measurements of the details of receptivity in multitudinous flows; further development and use of high-speed quiet tunnels; stability and transition studies for multitudinous flows; detailed studies of the transitional region for boundary layers, free flows, vortices separated flows, corner flows, etc.; and studies of flow-chemistry effects on transition phenomena. Applied research such areas as the physics of perforated-surface suction stabilization and the resolution of anomalies in the existing high-speed database is also suggested.

Bushnell, Dennis↗

DOE OSTI2020

A Preorganized Electric Field Leads to Minimal Geometrical Reorientation in the Catalytic Reaction of Ketosteroid Isomerase

Electrostatic interactions play a pivotal role in enzymatic catalysis and are increasingly modeled explicitly in computational enzyme design; nevertheless, they are challenging to measure experimentally. Using vibrational Stark effect (VSE) spectroscopy, we have measured electric fields inside the active site of the enzyme ketosteroid isomerase (KSI). These studies have shown that these fields can be unusually large, but it has been unclear to what extent they specifically stabilize the transition state (TS) relative to a ground state (GS). In the following, we use crystallography and computational modeling to show that KSI’s intrinsic electric field is nearly perfectly oriented to stabilize the geometry of its reaction’s TS. Moreover, we find that this electric field adjusts the orientation of its substrate in the ground state so that the substrate needs to only undergo minimal structural changes upon activation to its TS. This work provides evidence that the active site electric field in KSI is preorganized to facilitate catalysis and provides a template for how electrostatic preorganization can be measured in enzymatic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRSDate not supplied

Modeling Boundary-Layer Transition in Subsonic Flow over a Swept Wing

Predicting the onset of boundary-layer transition is often more accurate using physics-based models that directly compute disturbance growth rather than phenomenological models often implemented into industrial CFD codes. The aim of this ongoing study is to calibrate linear, physics-based computations of transition in subsonic flows over swept wings against a large set of experimental data. Advancing the calibration of linear models of transition contributes to the CFD-Vision-2030 goal of automated boundary-layer transition prediction. This progress report uses the dual N-factor method to model transition over the swept NACA 64-2-015A wing. The flow conditions match selected test conditions from an extensive experimental dataset acquired from the NASA Ames 12-ft Pressure Tunnel. The OVERFLOW 2.4b flow solver is used to obtain laminar basic states based on an infinite-span assumption. Stability analyses are performed on 365 distinct configurations with linear stability theory (LST) and parabolized stability equations (PSE) from the Langley Stability and Transition Analysis Codes (LASTRAC), modeling the growth of Tollmien-Schlichting (TS) and stationary crossflow (SCF) disturbances. From a total of 67 data points for unswept, i.e., TS-dominant configurations, the critical N-factor based on PSE is found to be N_TS = 9. The SCF critical N-factor is found to be near 8 for the highly swept, SCF-dominant configurations. Dual N-factor curves for both LST and PSE computations demonstrate a high level of interaction between TS and SCF. It may be worthwhile to investigate an alternate metric to visualize maximal SCF amplification upstream of the transition location to account for the growth of SCF modes near the leading edge, which is not considered in the conventional applications of the dual N-factor criterion.

boundary-layer transition↗

NASA NTRS2011

Data Analysis for the NASA/Boeing Hybrid Laminar Flow Control Crossflow Experiment

The Hybrid-Laminar Flow Control (HLFC) Crossflow Experiment, completed in 1995. generated a large database of boundary layer stability and transition data that was only partially analyzed before data analysis was abruptly ended in the late 1990's. Renewed interest in laminar flow technologies prompted additional data analysis, to integrate all data, including some post-test roughness and porosity measurements. The objective is to gain new insights into the effects of suction on boundary layer stability. A number of challenges were encountered during the data analysis, and their solutions are discussed in detail. They include the effect of the probe vibration, the effect of the time-varying surface temperature on traveling crossflow instabilities, and the effect of the stationary crossflow modes on the approximation of wall location. Despite the low turbulence intensity of the wind tunnel (0.01 to 0.02%), traveling crosflow disturbances were present in the data, in some cases at amplitudes up to 1% of the freestream velocity. However, the data suggests that transition was dominated by stationary crossflow. Traveling crossflow results and stationary data in the presence of suction are compared with linear parabolized stability equations results as a way of testing the quality of the results.

Eppink, Jenna L.↗

DOE OSTI2025

Controlling Interlayer Disorder Toward Reversible Phase Transition in a Layered Sodium Manganese Oxide Cathode

Sodium manganese oxides are promising Na-ion battery cathodes but they suffer from irreversible phase transitions during electrochemical reactions. Most strategies to date have aimed to suppress the phase transitions by stabilizing their layered structures through limiting the content of extractable Na + . Here, we conversely increase atomic disorder in the Na-birnessite, a layered sodium manganese oxide, and thereby modulate its phase transition behavior toward improved electrochemical reversibility. Our study reveals that Mn vacancies and Mn migrated into the interlayer affect interlayer local environment of Na + and water molecules consequently enhancing Na + mobility. We observe better capacity retention for disordered “D-Na-birnessite”, which undergoes a reversible phase transition from the birnessite-type structure to an O′3-type α-Na x MnO 2 -like structure through another intermediate metastable birnessite-type phase. In conclusion, this research highlights the positive effects of atomic disorder to regulate phase transition routes for achieving superior electrochemical reversibility, finally paving the way to overcoming the limits of layered oxide cathodes.

Kang, Seongkoo [Korea Univ., Seoul, (Korea, Republ↗

NASA NTRS2003

Technical Training on High-Order Spectral Analysis and Thermal Anemometry Applications

The topics of thermal anemometry and high-order spectral analyses were the subject of the technical training. Specifically, the objective of the technical training was to study: (i) the recently introduced constant voltage anemometer (CVA) for high-speed boundary layer; and (ii) newly developed high-order spectral analysis techniques (HOSA). Both CVA and HOSA are relevant tools for studies of boundary layer transition and stability.

THERMAL ANEMOMETRY↗

NASA NTRS1986

Boundary layer transition

The boundary layer stability, its active control by sound and surface heating and the effect of curvature are studied numerically and experimentally for subsonic flow. In addition, the experimental and flight test data are correlated using the stability theory for supersonic Mach numbers. Active transition fixing and feedback control of boundary layer by sound interactions are experimentally investigated at low speed over an airfoil. Numerical simulation of active control by surface heating and cooling in air shows that by appropriate phase adjustment a reduction in the level of perturbation can be obtained. This simulation is based on the solution of two-dimensional compressible Navier-Stokes equations for a flat plate. Goertler vortices are studied experimentally on an airfoil in the Low Turbulence Pressure Tunnel (LTPT). The flow pattern was visualized using the sublimating chemical technique and data were obtained using a three component laser velocimeter. The effect of curvature on swept leading-edge stability on a cylinder was numerically studied. The results suggest that transition is dominated by traveling disturbance waves and that the waves with the greatest total amplification has an amplitude ratio of e sup 11. Experimental data from the quiet supersonic tunnel and flight tests are analyzed using linear compressible stability theory.

Maestrello, L.↗

NASA NTRS2020

Mechanisms of Stationary Crossflow Instability Growth and Breakdown Induced by Forward-Facing Steps

An experimental study is performed to determine the mechanisms by which a forward-facing step impacts the growth and breakdown to turbulence of the stationary cross-flow instability. Particle image velocimetry measurements are obtained in the boundary layer of a 30◦swept flat plate with a pressure body. Step heights range from 53 % to 71 % of the boundary-layer thickness. The critical step height is approximately 60 % of the boundary-layer thickness for the current study, although it is also shown that the critical step height depends on the initial amplitude of the stationary cross-flow vortices. For the critical cases, the stationary cross-flow amplitude grows sharply downstream of the step, decays for a short region and then grows again. The initial growth region is linear, and can be explained primarily through the impact of the step on the mean flow. Namely, the step causes abrupt changes to the mean flow, resulting in large values of wall-normal shear, as well as highly inflectional profiles, due to either cross-flow reversal, separation or both. These inflectional profiles are highly unstable for the stationary cross-flow. Additionally,the reversed flow regions are significantly modulated by the stationary cross-flow vortices. The second region of growth occurs due to the stationary-cross-flow-induced modulation of the shear layer, which leads to multiple smaller wavelength stream wise vortices. High-frequency fluctuations indicate that the unsteady transition mechanism for the critical cases relates to the shedding of vortices downstream of reattachment of the modulated separated regions.

boundary layer stability↗

DOE OSTI2021

Transition Path Sampling Study of the Feruloyl Esterase Mechanism

Serine hydrolases cleave peptide and ester bonds and are ubiquitous in nature, with applications in biotechnology, in materials, and as drug targets. The serine hydrolase two-step mechanism employs a serine–histidine–aspartate/glutamate catalytic triad, where the histidine residue acts as a base to activate poor nucleophiles (a serine residue or a water molecule) and as an acid to allow the dissociation of poor leaving groups. This mechanism has been the subject of debate regarding how histidine shuttles the proton from the nucleophile to the leaving group. To elucidate the reaction mechanism of serine hydrolases, we employ quantum mechanics/molecular mechanics-based transition path sampling to obtain the reaction coordinate using the Aspergillus niger feruloyl esterase A (AnFaeA) as a model enzyme. The optimal reaction coordinates include terms involving nucleophilic attack on the carbonyl carbon and proton transfer to, and dissociation of, the leaving group. During the reaction, the histidine residue undergoes a reorientation on the time scale of hundreds of femtoseconds that supports the “moving histidine” mechanism, thus calling into question the “ring flip” mechanism. We find a concerted mechanism, where the transition state coincides with the tetrahedral intermediate with the histidine residue pointed between the nucleophile and the leaving group. Moreover, motions of the catalytic aspartate toward the histidine occur concertedly with proton abstraction by the catalytic histidine and help stabilize the transition state, thus partially explaining how serine hydrolases enable poor nucleophiles to attack the substrate carbonyl carbon. Rate calculations indicate that the second step (deacylation) is rate-determining, with a calculated rate constant of 66 s –1 . Altogether, these results reveal the pivotal role of active-site dynamics in the catalytic mechanism of AnFaeA, which is likely similar in other serine hydrolases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1989

Experimental transition and boundary-layer stability analysis for a slotted swept laminar flow control airfoil

A swept, supercritical laminar flow control (LFC) airfoil designated NASA SCLFC(1)-0513F was tested at subsonic and transonic speeds in the NASA Langley eight-foot Transonic Pressure Tunnel. This paper examines Tollmien-Schlichting and crossflow disturbance amplification for this airfoil using the linear stability method. The design methodology using linear stability analysis is evaluated and the results of the incompressible and compressible methods are compared. Experimental data on the swept, supercritical LFC airfoil and reference wind tunnel and flight results are used to correlate and evaluate the N-factor method for transition prediction over a speed range M(infinity) from zero to one.

Harvey, William D.↗

NASA NTRS1978

A demonstration of the value of general purpose, on-board satellite computers

Failure of the solar panels to erect and spin stabilize the TRANSIT Improvement Program (TIP) satellites is discussed, with emphasis on how the flight computer was reprogrammed to perform various control functions in order to achieve a partial mission success. These functions include: (1) power management to avoid troublesome spacecraft blackouts; (2) achieve enough spin stability to fire the OATS thruster; (3) raise the parking orbit to a workable altitude; (4) remove a high tumble rate which was the indirect result of the failure; and (5) deploy the gravity-gradient boom successfully on TIP-3.

Jenkins, R. E.↗

NASA NTRS1988

Rotating disk transition due to isolated roughness with intense acoustic irradiation

The low transition Reynolds numbers associated with boundary-layers which exhibit crossflow instability have made them an important area of study in fluid mechanics. An excellent test bed for the study of this flow is a flat disk rotating in still fluid. An experimental investigation of stability and transition of a rotating disk boundary-layer has been conducted. The effects of isolated roughness elements and acoustic forcing, both alone and in combination, were considered. The flow showed no receptivity to intense monochromatic acoustic forcing except in the presence of sizable roughness. A case was investigated where the growth of the primary instability, seeded by an isolated roughness element, was positively altered in the presence of sound, leading to a downstream movement of transition. In agreement with the work of several investigators, the results of this study suggest that receptivity to long wavelength phenomena, such as traveling sound waves, is contingent upon the presence of strong localized pressure gradients (such as those introduced by roughness) to reduce the length scales of the disturbance to those which are consistent with unstable wavelengths in the flow field.

Waitz, Ian A.↗

NASA NTRS2004

Opto-Electronic Oscillator Stabilized By A Hyperfine Atomic Transition

Opto-electronic oscillator (OEO) is a closed-loop system with part of the loop is implemented by an optical beam, and the rest by RF circuitry. The technological advantage of this approach over traditional all-RF loops in the gigahertz range comes from the that frequency filtering can be done far more efficiently in the optical range with compact, low power, and have superior stability. In this work, we report our preliminary results on using the phenomenon of coherent population trapping in (87) Rb vapor as an optical filter. Such a filter allows us to stabilize the OEO at the hyperfine splitting frequency of rubidium, thus implementing a novel type of frequency standard.

OEO (OPTO-ELECTRONIC OSCILLATORS)↗

NASA NTRS2023

Measurements and Computations of Natural Transition on the NASA Juncture-Flow Model with a Symmetric Wing

Experiments were performed in the 14- by 22-Foot Subsonic Tunnel to assess natural transition on the symmetric-airfoil wings of the NASA Juncture-Flow Model. Infrared thermography was used to visualize the heating on the upper surface of both wings of the full-span model, and on the fuselage, for angles of incidence ranging from -10° to 10° at a fixed Reynolds number of 2.4E6 based on the chord length at the wing planform break. The fuselage boundary layer transitioned well upstream of the wing-root leading edge for all conditions. Transition fronts were identified by a steep rise in the surface temperature, and the transition coordinates were transformed from an image-based to a body-fixed system. Additionally, the state of the boundary layer was estimated at pressure ports distributed on the wings through observation of the pressure coefficient as a function of the angle of incidence. For increasing angles of incidence, the transition front was observed to advance upstream, in a mostly spanwise-uniform fashion, from near midchord at α = 0°; however, for increasingly negative angles of incidence, the transition front first receded and then advanced in a nonuniform jagged manner that is typically observed with stationary crossflow. The transition wedges first appeared inboard of the wing break and then spread outboard to near the tip by α = -6°. The upstream shift in transition at positive angles of incidence and the outboard progression of crossflow-dominated transition at increasingly negative angles of incidence are consistent with trends identified in a computational assessment of the boundary-layer transition based on both linear stability analysis and Reynolds-averaged-Navier-Stokes-based transition models. The stability results obtained from the Langley Stability and Transition Analysis Code were used to recalibrate a dual N-factor criterion, which allowed for the prediction of transition fronts that showed excellent agreement with the experiment. The Reynolds-averaged-Navier-Stokes-based models, from the NASA OVERFLOW 2.3 solver, that accounted for the crossflow instability showed mixed results in comparison with the experiment, with the helicity-based Langtry-Menter model performing the best. The experimental data, particularly the cases involving strong influence from both Tollmien-Schlichting and crossflow instabilities, will be valuable for the continued validation and improvement of transition models.

Boundary layer transition↗

NASA NTRS2023

Measurements and Computations of Natural Transition on the NASA Juncture-Flow Model with a Symmetric Wing

boundary layer transition↗