CO2 storage associated with CO2 enhanced oil recovery: A statistical analysis of historical operations
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Pulsed-neutron well logs (PNLs) were acquired to monitor CO 2 storage associated with enhanced oil recovery. This work quantifies the precision of repeat PNLs using data from four wells and 15 repeat PNLs. Root-mean-square (RMS) precision for the repeat PNLs was less than 3%, indicating good agreement between the baseline and repeat PNLs. Evaluations of scaled relative difference (Scaled-D) showed variation in precision among individual wells and formations. Analysis of false-positive rates (FPRs) across the entire data set showed that a Scaled-D threshold in sandstone formations of approximately ±8% resulted in a 1% FPR. These Scaled-D precision thresholds were used to estimate the value of CO 2 saturation able to be confidently distinguished from baseline. The detection limit for CO 2 is lowest for high-porosity formations filled with saline water and is highest for low-porosity formations filled with fresh water. Thus, detection of vertical out-of-zone CO 2 migration using repeat PNLs is a function of instrument precision, petrophysical properties, and hydrology, all of which must be taken into account as part of the monitoring program. Here, the results of this work provide insight into how PNLs may be included within monitoring plans to detect vertical out-of-zone CO 2 migration along a wellbore or instances of wellbore failure and provide a quantitative basis for establishing detection limits of repeat PNLs to distinguish change from baseline conditions.
Purpose: The study aimed to analyze the dose–volume profiles of 3-dimensional radiation therapy (3D-CRT) and intensity modulated RT (IMRT) in the treatment of prostate carcinoma and to specify the profiles responsible for the development of gastrointestinal (GI) toxicity. Methods and Materials: In the period 1997 to 2007, 483 patients with prostate carcinoma in stage T1-3 N0 (pN0) M0 were treated with definitive RT. Two groups of patients were defined for the analysis: the 3D-CRT group (n=305 patients) and the IMRT group (n=178 patients). In the entire cohort of 483 patients, the median follow-up time reached 4.4 years (range, 2.0-11.7 years). The cumulative absolute and relative volumes of irradiated rectum exposed to a given dose (area under the dose–volume curve, AUC) were estimated. The receiver operating characteristic analysis was then used to search for the optimal dose and volume cutoff points with the potential to distinguish patients with enhanced or escalated toxicity. Results: Despite the application of high doses (78-82 Gy) in the IMRT group, GI toxicity was lower in that group than in the group treated by 3D-CRT with prescribed doses of 70 to 74 Gy. Both RT methods showed specific rectal dose–volume distribution curves. The total AUC values for IMRT were significantly lower than those for 3D-CRT. Furthermore, IMRT significantly decreased the rectal volume receiving low to intermediate radiation doses in comparison with 3D-CRT; specific cutoff limits predictable for the level of GI toxicity are presented and defined in our work. Conclusions: Total area under the dose–volume profiles and specific cutoff points in low and intermediate dose levels have significant predictive potential toward the RT GI toxicity. In treatment planning, it seems that it is valuable to take into consideration the entire dose–volume primary distribution.
Highlights: ► Sonochemical synthesis of SAPO-34 nanocrystals. ► Using Taguchi experimental design (L9) for optimizing the experimental procedure. ► The significant effects of all the ultrasonic parameters on the response. - Abstract: SAPO-34 nanocrystals with high crystallinity were synthesized by means of sonochemical method. An L9 orthogonal array of the Taguchi method was implemented to investigate the effects of sonication conditions on the preparation of SAPO-34 with respect to crystallinity of the final product phase. The experimental data establish the favorable phase crystallinity which is improved by increasing the ultrasonic power and the sonication temperature. In the case of ultrasonic irradiation time, however, an initial increases in crystallinity from 5 min to 15 min is followed by a decrease in crystallinity for longer sonication time.
Not Available
Not Available
Knock formation and its intensity for a stoichiometric ethanol/air mixture under a representative end-gas auto-ignition condition in IC engines with temperature inhomogeneities are investigated using multi-dimensional direct numerical simulations (DNS) with a 40-species skeletal mechanism of ethanol. Two- and three-dimensional simulations are performed by systematically varying temperature fluctuations and its most energetic length scale, l T . The volumetric fraction of the mixture regions that have the propensity to detonation development, F D , is proposed as a metric to predict the amplitude of knock intensity. It is found that with increasing l T , F D shows a good agreement with the heat release fraction of the mixture regions with pressure greater than equilibrium pressure, F H . The detonation peninsula is well captured by F D and F H when plotting them as a function of the volume-averaged ξ, ξ, (ξ= a/S sp is the ratio of the acoustic speed, a to the ignition front speed, S sp ) Decreasing l T is found to significantly reduce the super-knock intensity. The results suggest that decreasing l T , as in engines with tumble designs resulting in a smaller turbulence scale, will be effective in mitigating the the super-knock development.
Chemical attribution of the origin of an illegal drug is a key component of forensic efforts aimed at combating illicit and clandestine manufacture of drugs and pharmaceuticals. The results of these studies yield detailed information on synthesis byproducts, reagents, and precursors that can be used to identify the method of manufacture. Here in the present work, chemical attribution signatures (CAS) associated with the synthesis of the analgesic 3-methylfentanyl, N-(3-methyl-1-phenethylpiperidin-4-yl)-N-phenylpropanamide, were investigated. Eighteen crude samples from six synthesis methods were generated, the analysis of which was used to identify signatures (i.e. chemical compounds) that were important in the discrimination of synthetic route. These methods were carefully selected to minimize the use of scheduled precursors, complicated laboratory equipment, number of steps, and extreme reaction conditions. Using gas and liquid chromatographies combined with time-of-flight mass spectrometry (GC-QTOF and LC-QTOF) over 160 distinct species were monitored. Lastly, analysis of this combined data set was performed using modern machine learning techniques capable of reducing the size of the data set, prioritizing key chemical attribution signatures, and identifying the method of production for blindly synthesized 3-methylfentanyl materials.
Explore the source record for details and available documents.
The behavior of fast pyrolysis (FP) and catalytic FP (CFP) of 20 renewable feedstocks was studied in a microscale reactor with molecular beam mass spectral analysis of products generated. A partial least-squares (PLS) model was constructed based on the FP vapor spectra that predicts the aromatic selectivity when upgrading over a ZSM-5 catalyst. Additionally, principal component analysis of both FP and CFP spectra was performed for comprehensive spectral analysis. This work highlighted the value of vapor-phase mass spectral screening to predict the subsequent feedstock performance and demonstrated that the quantity of coke deposited on the catalyst is not a reliable measure of catalyst deactivation when the feedstock type is varied.
Trans-ionospheric pulse pairs (TIPPs), first observed in 1993, are signatures of in-cloud lightning discharges observed by satellite-based broadband very high frequency (VHF) receivers. It has been definitively shown that TIPPs are the space-based signatures of compact intracloud discharges (CIDs), and that the associated pair of pulses that comprise a TIPP result from the direct VHF pulse from the discharge, followed by a pulse reflected from the Earth's surface. However, the ratio of the peak amplitudes of these two pulses can vary widely, with the second pulse often having considerably higher peak amplitude than the first. This observation has not been satisfactorily explained. Using data collected from geostationary orbit by the Radio Frequency Sensor (RFS) and matched to locations reported by the Global Lightning Dataset (GLD360), we assemble the largest database to date of 76,348 TIPPs with associated location, altitude, and amplitude ratio of the two pulses in the TIPP. We show that the amplitude ratio of TIPPs is strongly correlated to the altitude of the associated discharges and the geometry of the source location with respect to the Earth's surface and the receiver. These observations strongly suggest that the difference in amplitude of the two pulses is driven by a nondipole radiated beam pattern that is dependent on the polarity of the CID, velocity of the current wavefront, and viewing angle.
We test the usefulness of the intermediate ionisation lines Al IIIλ1860 and C III]λ1909 as reliable virial mass estimators for quasars. We identified a sample of 309 quasars from the Sloan Digital Sky Survey Data Release 16 (SDSS DR16) in the redshift range 1.2 ≤ z ≤ 1.4 that have [O II]λ3728 recorded on the same spectrum as Al IIIλ1860, Si III]λ1892, and C III]λ1909. We set the systemic quasar redshift using careful measurements of [O II]λ3728. We then classified the sources as Population A (Pop. A), extreme Population A (Pop. xA), and Population B (Pop. B), and analysed the 1900 Å blend using multi-component models to look for systematic line shifts of Al IIIλ1860 and C III]λ1909 along the quasar main sequence. We do not find significant shifts of the Al IIIλ1860 line peak in Pop. B or in the vast majority of Pop. A. For Pop. xA, a small median blueshift of -250 km s -1 was observed, motivating a decomposition of the Al III line profile into a virialised component centred at rest frame and a blueshifted component for an outflow emission. For Pop. B objects, we proved the empirical necessity to fit a redshifted very broad component, clearly seen in C III], and analysed the physical implications on a Pop. B composite spectrum using CLOUDY simulations. We find consistent black hole mass estimations using Al III and C III] as virial estimators for the bulk of Pop. A. Al III (and even C III]) is a reliable virial black hole mass estimator for Pop. A and Pop. B objects. The Pop. xA sources deserve special attention due to the significant blueshifted excess observed in the line profile of Al III, although it is not as large as the excess observed in C IVλ1549.
We have measured ion temperature as well as electron temperature in plasma blobs observed in a linear plasma device by using an improved ion sensitive probe. Current-voltage characteristics of the ion sensitive probe inside and outside plasma blobs were re-constructed with a conditional sampling method. It is clearly found that both ion and electron temperatures in plasma blobs decrease more slowly in a cross-field direction than those in a bulk plasma without plasma blobs.
The paper presents the results of a study on shot to shot variation in energy density of an ion beam formed by a self-magnetically insulated diode with an explosive emission cathode. The experiments were carried out with the TEMP-4M accelerator operating in double-pulse mode: plasma formation occurs during the first pulse (negative polarity, 300–500 ns, 100–150 kV), and ion extraction and acceleration during the second pulse (positive polarity, 150 ns, 250–300 kV). Crucially, it was found that the standard deviation of energy density does not exceed 11%, whilst the same variation for ion current density was 20%–30%, suggesting the presence of neutrals in the beam. This idea is further supported by the fact that ion current density is only weakly dependant on the accelerating voltage and other output parameters of the accelerator (coefficient of determination < 0.3), whilst the correlation between the energy density of the beam and the output parameters is strong (coefficient of determination > 0.9). We attribute the neutral component as being due to charge exchange between accelerated ions and neutral molecules from a neutral layer near the anode surface. Implementation using a self-magnetically insulated diode with an explosive-emission cathode, having an operational lifetime of up to 10{sup 7} shots, has promising prospects for various technological applications.
The connection between impurity ion heating and other physical processes in the plasma is evaluated by studying variations in the amount of ion heating at reconnection events in the Madison Symmetric Torus (MST). Correlation of the change in ion temperature with individual tearing mode amplitudes indicates that the edge-resonant modes are better predictors for the amount of global ion heating than the core-resonant modes. There is also a strong correlation between ion heating and current profile relaxation. Simultaneous measurements of the ion temperature at different toroidal locations reveal, for the first time, a toroidal asymmetry to the ion heating in MST. These results present challenges for existing heating theories and suggest a stronger connection between edge-resonant tearing modes, current profile relaxation, and ion heating than has been previously thought.
In the present work, results of investigations into the dynamics of secondary electrons with helium atoms in the presence of the reverse electric field arising in the flare of a high-voltage pulsed beam-type discharge and leading to degradation of the primary electron beam are presented. The electric field in the discharge of this type at moderate pressures can reach several hundred V/cm and leads to considerable changes in the kinetics of secondary electrons created in the process of propagation of the electron beam generated in the accelerating gap with a grid anode. Moving in the accelerating electric field toward the anode, secondary electrons create the so-called compensating current to the anode. The character of electron motion and the compensating current itself are determined by the ratio of the field strength to the concentration of atoms (E/n). The energy and angular spectra of secondary electrons are calculated by the Monte Carlo method for different ratios E/n of the electric field strength to the helium atom concentration. The motion of secondary electrons with threshold energy is studied for inelastic collisions of helium atoms and differential analysis is carried out of the collisional processes causing energy losses of electrons in helium for different E/n values. The mechanism of creation and accumulation of slow electrons as a result of inelastic collisions of secondary electrons with helium atoms and selective population of metastable states of helium atoms is considered. It is demonstrated that in a wide range of E/n values the motion of secondary electrons in the beam-type discharge flare has the character of drift. At E/n values characteristic for the discharge of the given type, the drift velocity of these electrons is calculated and compared with the available experimental data.
The present study was carried out to determine levels of inorganic compounds contained in the ground water and Reverse Osmosis (RO) water filtration result. The data in groundwater samples was collected from Bekasi, Tangerang and Jakarta in Indonesia. A total of 30 samples were collected and analyzed for the determine Cadmium (Cd), Chromium (Cr), Manganese (Mn), Cyanide (CN) and Lead (Pb). The results of the study revealed that in groundwater, the average of Cd 0.0058 mg / l, Mn 1.5233 mg / l, Cr 0.0127 mg/l, Pb 0.0060 mg / l, and CN 0.0040 mg / l. The level of RO result were: Cd 0.0027 mg / l, Mn 0.1767 mg / l, Cr 0.0024 mg / l, Pb 0.0021 mg / l, and CN 0.0023 mg / l . This means that Cd and Mn in ground water were higher than the values recommended by PAK-EPA and WHO or the standard of Indonesian Ministry of Health. But after filtration Reverse Osmosis (RO) Mn and Cd levels decreased to levels below the standardized value. By comparing of mean in MANOVA and nonparametric MANOVA in α=5%, there are differences in average levels of inorganic substances Mn, Cr, Cd, Pb, and CN between before and after RO filtration.