Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stress intensity factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Interaction between a circular inclusion and an arbitrarily oriented crack

The plane interaction problem for a circular elastic inclusion imbedded into an elastic matrix which contains an arbitrarily oriented crack is considered. Using the existing solutions for the edge dislocations as Green's functions, first the general problem of a through crack in the form of an arbitrary smooth arc located in the matrix in the vicinity of the inclusion is formulated. The integral equations for the line crack are then obtained as a system of singular integral equation with simple Cauchy kernels. The singular behavior of the stresses around the crack tips is examined and the expressions for the stress intensity factors representing the strength of the stress singularities are obtained in terms of the asymptotic values of the density functions of the integral equations. The problem is solved for various typical crack orientations and the corresponding stress intensity factors are given.

Erdogan, F.↗
NASA NTRS1975

Interaction between a circular inclusion and an arbitrarily oriented crack

The plane interaction problem for a circular elastic inclusion embedded in an elastic matrix which contains an arbitrarily oriented crack is considered. Using the existing solutions for the edge dislocations as Green's functions, first the general problem of a through crack in the form of an arbitrary smooth arc located in the matrix in the vicinity of the inclusion is formulated. The integral equations for the line crack are then obtained as a system of singular integral equations with simple Cauchy kernels. The singular behavior of the stresses around the crack tips is examined and the expressions for the stress-intensity factors representing the strength of the stress singularities are obtained in terms of the asymptotic values of the density functions of the integral equations. The problem is solved for various typical crack orientations and the corresponding stress-intensity factors are given.

Erdogan, F.↗
NASA NTRS1994

On the measurement of the crack tip stress field as a means of determining Delta K(sub eff) under conditions of fatigue crack closure

The optical method of caustics has been successfully extended to enable stress intensity factors as low as 1MPa square root of m to be determined accurately for central fatigue cracks in 2024-T3 aluminium alloy test panels. The feasibility of using this technique to study crack closure, and to determine the effective stress intensity factor range, Delta K(sub eff), has been investigated. Comparisons have been made between the measured values of stress intensity factor, K(sub caus), and corresponding theoretical values, K(sub theo), for a range of fatigue cracks grown under different loading conditions. The values of K(sub caus) and K(sub theo) were in good agreement at maximum stress, where the cracks are fully open, while K(sub caus) exceeded K(sub theo) at minimum stress, due to crack closure. However, the levels of crack closure and values of Delta K(sub eff) obtained could not account for the variations of crack growth rate with loading conditions. It is concluded that the values of Delta K(sub eff), based on caustic measurements in a 1/square root of r stress field well outside the plastic zone, do not fully reflect local conditions which control crack tip behavior.

Wallhead, Ian R.↗
NASA NTRS1984

Methods for analysis of cracks in three-dimensional solids

Analytical and numerical methods evaluating the stress-intensity factors for three-dimensional cracks in solids are presented, with reference to fatigue failure in aerospace structures. The exact solutions for embedded elliptical and circular cracks in infinite solids, and the approximate methods, including the finite-element, the boundary-integral equation, the line-spring models, and the mixed methods are discussed. Among the mixed methods, the superposition of analytical and finite element methods, the stress-difference, the discretization-error, the alternating, and the finite element-alternating methods are reviewed. Comparison of the stress-intensity factor solutions for some three-dimensional crack configurations showed good agreement. Thus, the choice of a particular method in evaluating the stress-intensity factor is limited only to the availability of resources and computer programs.

Raju, I. S.↗
NASA NTRS1998

Computation of Anisotropic Bi-Material Interfacial Fracture Parameters and Delamination Creteria

This report documents the recent developments in methodologies for the evaluation of the integrity and durability of composite structures, including i) the establishment of a stress-intensity-factor based fracture criterion for bimaterial interfacial cracks in anisotropic materials (see Sec. 2); ii) the development of a virtual crack closure integral method for the evaluation of the mixed-mode stress intensity factors for a bimaterial interfacial crack (see Sec. 3). Analytical and numerical results show that the proposed fracture criterion is a better fracture criterion than the total energy release rate criterion in the characterization of the bimaterial interfacial cracks. The proposed virtual crack closure integral method is an efficient and accurate numerical method for the evaluation of mixed-mode stress intensity factors.

Chow, W-T.↗
NASA NTRS1974

The circumferentially notched cylindrical bar as a fracture toughness test specimen

The present work reviews the use of the notched cylinder as a screening specimen for use in sorting materials with respect to their relative levels of plane strain fracture toughness. Irwin's work in developing an estimate of stress intensity factors for the circumferentially cracked cylinder is reviewed. Some discrepancies between stress intensity factors determined with fatigue cracked notched cylinders and those determined with plate specimens are discussed. Problems in the technical realization of fatigue cracking a specimen are briefly discussed, and the problem of ensuring low eccentricity of loading when testing notch cylindrical specimens is considered. Finally, specimen size requirements for testing are examined.

Brown, W. F., Jr.↗
NASA NTRS1988

A finite-element alternating method for two-dimensional Mode-1 crack configurations

A finite-element alternating method is presented for 2-D Mode-1 crack problems. An analytical solution for an arbitrary polynomial normal pressure distribution applied to the crack faces is obtained and used as the basic solution in the method. The method is applied to several crack problems to study its efficiency and the results are compared to accurate stress-intensity factor solutions in the literature. The method gave reasonably accurate stress-intensity factors and crack opening displacements with minimal computing effort. Because the method must model only the uncracked body, finite-element models with many degrees of freedom are not warranted and therefore, the method has been implemented on personal computers.

Raju, I. S.↗
NASA NTRS1989

A finite-element alternating method for two dimensional mode I crack configurations

A finite-element alternating method is presented for two-dimensional Mode-1 crack problems. An analytical solution for an arbitrary polynomial normal pressure distribution applied to the crack faces is obtained and used as the basic solution in the method. The method is applied to several crack problems to study its efficiency and the results are compared to accurate stress-intensity factor solutions in the literature. The method gave reasonably accurate stress-intensity factors and crack opening displacements with minimal computing effort. Because the method must model only the uncracked body, finite-element models with many degrees of freedom are not warranted and therefore, the method has been implemented on personal computers.

Raju, I. S.↗
NASA NTRS1999

Analysis of a Generally Oriented Crack in a Functionally Graded Strip Sandwiched Between Two Homogeneous Half Planes

The driving forces for a generally oriented crack embedded in a Functionally Graded strip sandwiched between two half planes are analyzed using singular integral equations with Cauchy kernels, and integrated using Lobatto-Chebyshev collocation. Mixed-mode Stress Intensity Factors (SIF) and Strain Energy Release Rates (SERR) are calculated. The Stress Intensity Factors are compared for accuracy with previously published results. Parametric studies are conducted for various nonhomogeneity ratios, crack lengths. crack orientation and thickness of the strip. It is shown that the SERR is more complete and should be used for crack propagation analysis.

Shbeeb, N.↗
NASA NTRS1982

Fracture mechanics in fiber reinforced composite materials, taking as examples B/A1 and CRFP

The validity of linear elastic fracture mechanics and other fracture criteria was investigated with laminates of boron fiber reinforced aluminum (R/A1) and of carbon fiber reinforced epoxide (CFRP). Cracks are assessed by fracture strength Kc or Kmax (critical or maximum value of the stress intensity factor). The Whitney and Nuismer point stress criterion and average stress criterion often show that Kmax of fiber composite materials increases with increasing crack length; however, for R/A1 and CFRP the curve showing fracture strength as a function of crack length is only applicable in a small domain. For R/A1, the reason is clearly the extension of the plastic zone (or the damage zone n the case of CFRP) which cannot be described with a stress intensity factor.

Peters, P. W. M.↗
NASA NTRS1979

Normal and radial impact of composites with embedded penny-shaped cracks

A method is developed for the dynamic stress analysis of a layered composite containing an embedded penny-shaped crack and subjected to normal and radial impact. The material properties of the layers are chosen such that the crack lies in a layer of matrix material while the surrounding material possesses the average elastic properties of a two-phase medium consisting of a large number of fibers embedded in the matrix. Quantitatively, the time-dependent stresses near the crack border can be described by the dynamic stress intensity factors. Their magnitude depends on time, on the material properties of the composite and on the relative size of the crack compared to the composite local geometry. Results obtained show that, for the same material properties and geometry of the composite, the dynamic stress intensity factors for an embedded (penny-shaped) crack reach their peak values within a shorter period of time and with a lower magnitude than the corresponding dynamic stress intensity factors for a through-crack.

Sih, G. C.↗
NASA NTRS1974

An orthotropic laminate composite containing a layer with a crack

A laminate composite containing an orthotropic layer with a crack situated normal to the interfaces, and bonded to two orthotropic half-planes of dissimilar materials was considered. The solutions for two different classes of orthotropic materials are presented. In each case, the problem was first reduced to a system of dual integral equations, then to a singular integral equation which was subsequently solved numerically for the stress intensity factors at the tip of the crack. The effect of the material properties on the stress intensity factor was investigated. The generalized plane stress and the plane strain were treated simultaneously.

Arin, K.↗
NASA NTRS1994

A Review Of Modelling Small-Crack Behavior And Fatigue-Life Predictions For Aluminum Alloys

The small-crack effect, where small fatigue cracks grow faster and at lower stress-intensity factors than large cracks, has been found to be significant for many materials and loading conditions. In this paper, plasticity effects and crack-closure modelling of small fatigue cracks are reviewed. A crack-closure model with a cyclic-plastic zone-corrected effective stress-intensity factor range (related to the cyclic J-integral) and microstructural data on crack-initiation sites were used to calculate small-crack growth rates and fatigue lives for unnotched and notched specimens made of two aluminum alloys. The crack-closure transient from the plastic wake was shown to be the dominant cause of the small-crack effect and plasticity effects on the cyclic-plastic zone-corrected stress-intensity factor range were negligible except at extremely high stress levels. Small-crack growth rates and fatigue lives under both constant-amplitude and spectrum loading from tests and analyses agreed well.

Newman, J. C., Jr.↗
NASA NTRS1985

A pressurized cylindrical shell with a fixed end which contains an axial part-through or through crack

In this paper a cylindrical shell having a very stiff end plate or a flange is considered. It is assumed that near the end the cylinder contains an axial flow which may be modeled as a part-through surface crack or through crack. The primary objective is to study the effect of the end constraining on the stress intensity factor which is the main fracture mechanics parameter. The applied loads acting on the cylinder are assumed to be axisymmetric. Thus the crack problem under consideration is symmetric with respect to the plane of the crack and consequently only the mode I stress intensity factors are nonzero. With this limitation, the general perturbation problem for a cylinder with a built-in end containing an axial crack is considered. Reissner's shell theory is used to formulate the problem. The part-through crack problem is treated by using a line-spring model. In the case of a crack tip terminating at the fixed end it is shown that the integral equation of the shell problem has the same generalized Cauchy kernel as the corresponding plane stress elasticity problem. Even though the problem is formulated for a general surface crack profile and arbitrary crack surface tractions, the numerical results are obtained only for a semielliptic part-through axial crack located at the inside or outside surface of the cylinder and for internal pressure acting on the cylinder. The stress intensity factors are calculated and presented for a relatively wide range of dimensionless length parameters of the problem.

Yahsi, O. S.↗
NASA NTRSDate not supplied

Fracture Mechanics Testing of Titanium 6AL-4V in LMP-103S Propellant

Propellant tank safe-life analysis is a spacecraft propulsion subsystem Launch Range processing requirement. The material property inputs for the safe-life analysis include the stress intensity factor for environment-assisted cracking (KEAC). The KEAC for titanium alloy Ti 6Al-4V in LMP-103S propellant was determined experimentally using an innovative test method following ASTM E1681, Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials. This effort was a collaboration between NASA Goddard Space Flight Center and NASA Kennedy Space Center to expose the test specimens in the propellant, while loaded in the test fixtures, for 1000- hour (42 days) at 50°C. Two test rounds have been completed to date; 1) testing mechanically loaded specimens but without propellant and 2) testing mechanically loaded specimens wetted with LMP-103S propellant. The dry test was to evaluate the crack growth without exposure to the LMP-103S propellant, and further assess the un-wetted stress intensity factor for the full 1000-hour duration. The second round of testing included the propellant soak for the requisite 1000- hour at 50°C. Current results show that the threshold intensity factor for environment-assisted cracking (exposed to LMP103S) is 22.5 ksi√in for the bulk material and 36. 2 ksi√in for the weld material. A generic ‘candidate’ tank geometry and material thickness is developed for a damage tolerance of known surface cracks below the nondestructive inspection technique detection limit. Evaluations with and without the use of a threshold intensity factor for environment-assisted cracking is performed for the required 4x propellant tank service life using the software tool NASGRO. SP2024_00239

Green propulsion↗
NASA NTRS1973

Two bonded half planes with a crack going through the interface

The plane problem of two bonded elastic half planes containing a finite crack perpendicular to and going through the interface is considered. The problem is formulated as a system of singular integral equations with generalized Cauchy kernels. Even though the system has three irregular points, it is shown that the unknown functions are algebraically related at the irregular point on the interface and the integral equations can be solved by a method developed previously. The system of integral equations is shown to yield the same characteristic equation as that for two bonded quarter planes in the general case of the through crack, and the characteristic equation for a crack tip terminating at the interface in the special case. The numerical results given in the paper include the stress intensity factors at the crack tips, the normal and shear components of the stress intensity factors at the singular point on the interface, and the crack surface displacements.

Erdogan, F.↗
NASA NTRS1973

A note on the interference of two collinear cracks in a cylindrical shell

A stress analysis of a pressurized shallow cylindrical shell containing two collinear axial cracks of equal length was conducted. The mathematical relationships for conducting the stress analysis are developed. Graphs are presented to show the stress intensity factor ratio in the cylindrical shell and the bending components of the stress intensity factor ratio.

Erdogan, F.↗
NASA NTRS1977

An orthotropic laminate composite containing a layer with a crack

A laminate composite containing an orthotropic layer with a crack situated normal to the interfaces, and bonded to two orthotropic half-planes of dissimilar materials, is considered. The solutions for two different classes of orthotropic materials are presented separately. In each case, the problem is first reduced to a system of dual integral equations, then to a singular integral equation which is subsequently solved numerically for the stress intensity factors at the tip of the crack. The effect of the material properties on the stress intensity factor is investigated. Two cases, the generalized plane stress and the plane strain, are treated simultaneously.

Arin, K.↗