Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sulfate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Variable Chain Length Carboxylic Acids as Modifiers to Enhance the Antiviral Efficacy of Sodium Dodecyl Sulfate.

Non-toxic disinfectants composed of readily available commodity chemicals are needed for immediate response to the current COVID-19 pandemic. One such area is the active research field for food-grade sanitization. Combinations of levulinic acid, a five-carbon ketocarboxylic acid, and sodium dodecyl sulfate, have been frequently described for antibacterial use on food contact surfaces. Levulinic acid has been identified as a renewable feedstock but is not presently in commodity production. Other carboxylic acids, such as acetic acid, may be equally usable and food-safe. Acidic and buffered solutions were highly effective, yielding no countable surviving organisms. The high efficacy of each acid may suggest that carboxylic acid sanitizers in general have potential use against viruses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Removal of High Specific Activity Fission Products from Uranyl Sulfate Waste Solutions

The Savannah River National Laboratory (SRNL) is currently providing support to SHINE Medical Technologies (SHINE) which plans to deploy a low energy, accelerator-based neutron source to fission low enriched U in a uranyl sulfate target solution for 99 Mo production. The 99 Mo is initially separated from the fission products and target solution by an extraction column. Subsequent washing of the column will generate waste solutions containing residual U and fission product activity. A small number of high specific activity fission products (e.g., 90 Sr, 137 Cs, and 144 Ce) in these streams will likely control the classification of the low level waste (LLW). If a sufficient amount of the high specific activity isotopes are separated from the SHINE waste streams and concentrated into a waste form, it would be possible to treat a majority of the wash solutions from the column operations as a lower class of LLW (Class A versus Class B or C or Class B versus Class C). The high specific activity fission product elements could then be dispositioned as a much smaller volume of waste rather than requiring the disposal of the entire waste stream at the higher waste classification. The Savannah River Site (SRS) has experience with using monosodium titanate (MST) and crystalline silicotitanate (CST) to remove Cs and Sr from high salt content waste solutions generated during the reprocessing of nuclear fuels and targets. Both of these materials have worked very well for their intended purposes at the SRS where the fission product elements are removed from highly alkaline waste. On the other hand, SHINE waste streams from the extraction column contain H 2 SO 4 which makes the solution acidic. Additionally, the SRS waste streams do not contain other fission product elements such as transition metals or lanthanides because they precipitate upon neutralization of the SRS waste and are not present in the supernate which is dispositioned as LLW following treatment. As such, there are inherent differences between SHINE and SRS waste treatment strategies. Savannah River National Laboratory was tasked with performing scoping studies to see if MST and CST would remove Sr, Cs, and Ce from an acidic mixed metal simulant solution. Batch contact experiments were performed using MST and two CST type materials. The MST material is a 15 wt % powder in 0.15 M NaOH slurry. The MST showed low adsorption for elements of interest from acidic solution. Furthermore, the powder size makes MST non-ideal for column operations. A CST IE-911 ion exchange material had high Cs adsorption, moderate Sr, and marginal Ce adsorption. Based on adsorption of all species, the ion exchange capacity was found to be 0.032 meq/mL. A bench-top column experiment to measure elemental breakthrough curves was performed using CST IE-911 where chromatographic separations of the mixed simulant were expected to occur. While most elements behaved as expected, the lanthanide series, containing Ce, broke though the column earlier than expected. The second CST material, CST R9120, displayed high adsorption for all elements in the acidic mixed simulant solutions in a batch contact study, and had a calculated loading capacity of 0.091 meq/mL. Future studies to develop a waste treatment flowsheet should focus on CST R9120 to treat SHINE waste solutions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Functional Ion Pair Receptors Targeting Cesium, Lithium, Sulfate, and Uranyl (Final Technical Report)

The major goal of this project was the synthesis and study of receptors for key ions of interest to the DOE mission, namely cesium, lithium, sulfate, hydroxide, carbon dioxide/bicarbonate, and early actinides. The work, fundamental in nature, had as its objective achieving an increased understanding of how changes in receptor design could be used to optimize binding energies, ion specificity, complex structure, extraction efficiency, and substrate release. Within this broad paradigm, particular emphasis was placed on systems that could be used to sense the cesium cation in mixed aqueous media and act as extractants for the lithium cation and, separately, the carbon dioxide/bicarbonate and hydroxide anions in the form of ion pairs likely to be encountered under conditions of putative use in the field. The development of new nitrogen-rich ligands that act as receptors for early, high-valent actinide cations was also a major point of emphasis. The first in-plane actinide complexes were synthesized using a hexa-aza porphyrin analogue. The complexes exhibited an increase in the ligand–metal bonding covalency on passing from thorium(IV) to uranium(IV) to neptunium(IV) and illustrates how the use of appropriate porphyrinoid-like ligands could be used to modulate the covalency interactions between an f-element metal center and a ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fission Induced Radiolysis of Uranyl Sulfate Solutions

At Argonne National Laboratory, an experimental pilot facility is being tested for the production of the medical isotope molybdenum-99 ( 99 Mo). AMORE (Argonne Molybdenum Research Experiment) is an experimental pilot facility in which a 40 MeV electron beam from the LINAC strikes a depleted uranium (DU) target. The target generates high energy neutrons, which are thermalized in an 18-liter uranyl sulfate solution of low enriched uranium (LEU). Thermalized neutrons fission the uranium-235 ( 235 U) to produce 99 Mo as well as many other fission products. The 99 Mo is recovered from the uranium solution and purified. The goal of our work is to reduce the use of highly enriched uranium (HEU) for the production of this isotope.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

Pharmacokinetics and relative bioavailability study of two cefquinome sulfate intramammary infusions in cow milk

In this study, two intramammary infusions of cefquinome sulfate were investigated for pharmacokinetics and bioavailability. Twelve lactating cows for each group were administered an effective dose of 75 mg/gland for cefquinome, with milk samples collected at various time intervals. The concentrations of cefquinome in milk at different times were determined by the UPLC-MS/MS method. Analyses of noncompartmental pharmacokinetics were conducted on the concentration of cefquinome in milk. Mean pharmacokinetic parameters of group A and group B following intramammary administration were as follows: AUC last 300558.57 ± 25052.78 ng/mL and 266551.3 ± 50654.85 ng/mL, C max 51786.35 ± 11948.4 ng/mL and 59763.7 ± 8403.2 ng/mL, T 1/2 5.69 ± 0.62 h and 5.25 ± 1.62 h, MRT 7.43 ± 0.79 h and 4.8 ± 0.78 h, respectively. Pharmacokinetic experiments showed that the relative bioavailability of group B was 88.69% that of group A. From our findings, group B (3 g: 75 mg) shows a quicker drug elimination process than group A (8 g: 75 mg), which suggests that the withdrawal period for the new formulation may be shorter.

Li, Shuang↗
DOE OSTI2020

Bacteriophage-Induced Lipopolysaccharide Mutations in Escherichia coli Lead to Hypersensitivity to Food Grade Surfactant Sodium Dodecyl Sulfate

Bacteriophages (phages) are considered as one of the most promising antibiotic alternatives in combatting bacterial infectious diseases. However, one concern of employing phage application is the emergence of bacteriophage-insensitive mutants (BIMs). Here, we isolated six BIMs from E. coli B in the presence of phage T4 and characterized them using genomic and phenotypic methods. Of all six BIMs, a six-amino acid deletion in glucosyltransferase WaaG likely conferred phage resistance by deactivating the addition of T4 receptor glucose to the lipopolysaccharide (LPS). This finding was further supported by the impaired phage adsorption to BIMs and glycosyl composition analysis which quantitatively confirmed the absence of glucose in the LPS of BIMs. Since LPSs actively maintain outer membrane (OM) permeability, phage-induced truncations of LPSs destabilized the OM and sensitized BIMs to various substrates, especially to the food-grade surfactant sodium dodecyl sulfate (SDS). This hypersensitivity to SDS was exploited to design a T4–SDS combination which successfully prevented the generation of BIMs and eliminated the inoculated bacteria. Collectively, phage-driven modifications of LPSs immunized BIMs from T4 predation but increased their susceptibilities as a fitness cost. The findings of this study suggest a novel strategy to enhance the effectiveness of phage-based food safety interventions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Properties of Gaseous Deprotonated L-Cysteine S-Sulfate Anion [cysS-SO3]−: Intramolecular H-Bond Network, Electron Affinity, Chemically Active Site, and Vibrational Fingerprints

L-cysteine S-sulfate, Cys-SSO3H, and their derivatives play essential roles in biological chemistry and pharmaceutical synthesis, yet their intrinsic molecular properties have not been studied to date. In this contribution, the deprotonated anion [cysS-SO3]− was introduced in the gas phase by electrospray and characterized by size-selected, cryogenic, negative ion photoelectron spectroscopy. The electron affinity of the [cysS-SO3]• radical was determined to be 4.95 ± 0.10 eV. In combination with theoretical calculations, it was found that the most stable structure of [cysS-SO3]− (S1) is stabilized via three intramolecular hydrogen bonds (HBs); i.e., one O-H……N between the -COOH and -NH2 groups, and two N-H……O HBs between -NH2 and -SO3, in which the amino group serves as both HB acceptor and donor. In addition, a nearly iso-energetic conformer (S2) with the formation of an O-H……N-H……O-S chain-type binding motif competes with S1 in the source. The most reactive site of the molecule susceptible for electrophilic attacks is the linkage S atom. Theoretically predicted infrared spectra indicate that O-H and N-H stretching modes are the fingerprint region (2800 to 3600 cm−1) to distinguish different isomers. The obtained information lays out a foundation to better understand the transformation and structure–reactivity correlation of Cys-SSO3H in biologic settings.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Sodium Dodecyl Sulfate–Mediated Graphene Sensor for Electrochemical Detection of the Antibiotic Drug: Ciprofloxacin

The present study involves detecting and determining CIP by a new electrochemical sensor based on graphene (Gr) in the presence of sodium dodecyl sulfate (SDS) employing voltammetric techniques. Surface morphology studies of the sensing material were analyzed using a scanning electron microscope (SEM) and atomic force microscope (AFM). In the electroanalysis of CIP at the developed electrode, an enhanced anodic peak response was recorded, suggesting the electro-oxidation of CIP at the electrode surface. Furthermore, we evaluated the impact of the electrolytic solution, scan rate, accumulation time, and concentration variation on the electrochemical behavior of CIP. The possible electrode mechanism was proposed based on the acquired experimental information. A concentration variation study was performed using differential pulse voltammetry (DPV) in the lower concentration range, and the fabricated electrode achieved a detection limit of 2.9 × 10 -8 M. The proposed sensor detected CIP in pharmaceutical and biological samples. The findings displayed good recovery, with 93.8% for tablet analysis and 93.3% to 98.7% for urine analysis. The stability of a developed electrode was tested by inter- and intraday analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Heparan sulfate promotes TRAIL-induced tumor cell apoptosis

TRAIL (TNF-related apoptosis-inducing ligand) is a potent inducer of tumor cell apoptosis through TRAIL receptors. While it has been previously pursued as a potential anti-tumor therapy, the enthusiasm subsided due to unsuccessful clinical trials and the fact that many tumors are resistant to TRAIL. In this report, we identified heparan sulfate (HS) as an important regulator of TRAIL-induced apoptosis. TRAIL binds HS with high affinity (K D = 73 nM) and HS induces TRAIL to form higher-order oligomers. The HS-binding site of TRAIL is located at the N-terminus of soluble TRAIL, which includes three basic residues. Binding to cell surface HS plays an essential role in promoting the apoptotic activity of TRAIL in both breast cancer and myeloma cells, and this promoting effect can be blocked by heparin, which is commonly administered to cancer patients. We also quantified HS content in several lines of myeloma cells and found that the cell line showing the most resistance to TRAIL has the least expression of HS, which suggests that HS expression in tumor cells could play a role in regulating sensitivity towards TRAIL. We also discovered that death receptor 5 (DR5), TRAIL, and HS can form a ternary complex and that cell surface HS plays an active role in promoting TRAIL-induced cellular internalization of DR5. Combined, our study suggests that TRAIL-HS interactions could play multiple roles in regulating the apoptotic potency of TRAIL and might be an important point of consideration when designing future TRAIL-based anti-tumor therapy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

All-vanadium sulfate acid redox flow battery system

All-vanadium sulfate redox flow battery systems have a catholyte and an anolyte comprising an aqueous supporting solution including chloride ions and phosphate ions. The aqueous supporting solution stabilizes and increases the solubility of vanadium species in the electrolyte, allowing an increased vanadium concentration over a desired operating temperature range. According to one example, the chloride ions are provided by MgCl2, and the phosphate ions are provided by (NH4)2HPO4.

25 ENERGY STORAGE↗
DOE OSTI2022

All-vanadium sulfate acid redox flow battery system

All-vanadium sulfate redox flow battery systems have a catholyte and an anolyte comprising an aqueous supporting solution including chloride ions and phosphate ions. The aqueous supporting solution stabilizes and increases the solubility of vanadium species in the electrolyte, allowing an increased vanadium concentration over a desired operating temperature range. According to one example, the chloride ions are provided by MgCl 2 , and the phosphate ions are provided by (NH 4 ) 2 HPO 4 .

Nie, Zimin↗
DOE OSTI2025

Lanthanide Sulfate Recovery by Synergistic Dimethyl Ether and Na 2 SO 4 Fractional Crystallization

Lanthanides (Lns) are important to many technologies including magnets used in high-efficiency traction motors and generators. While commonly occurring in the environment and industrial waste streams, Ln are generally present at low concentrations. This work demonstrates synergistic Ln recovery from an aqueous magnet leachate to single ppm concentrations using Na 2 SO 4 addition and subsequent dimethyl ether-driven fractional crystallization (DME-FC) treatment. It is found that combining DME-FC with low concentrations of Na 2 SO 4 (≈0.1 M) results in synergistic isolation of Lns while making use of Na 2 SO 4 , an excessive byproduct of hydrometallurgical metal production. Combined Na 2 SO 4 + DME reduces Ln metal ion (Pr, Nd, Sm, Gd, Dy, and Ho) solubilities by 700–27,000x with final concentrations ranging from 2 ppm to 200 ppm. Separately, Na 2 SO 4 0.1 M provides a 10–200x reduction and DME provides a 90–1,400x reduction in Ln solubilities. Final Ln concentrations of the combined process are 99.8% lower than what is achieved with each individual process.

dimethyl ether↗
DOE OSTI2020

Contrasting stream nitrate and sulfate response to recovery from experimental watershed acidification

Improvements in air quality have led to ecosystem recovery from acidic deposition, but the mechanisms and trajectories of this recovery are not fully understood. Here, we present long-term stream response and recovery data for paired watersheds at the Bear Brook Watershed in Maine (BBWM) during declining ambient SO 4 and NO 3 in precipitation. East Bear (EB) received ambient deposition from 1989 to 2018; West Bear (WB) received artificially elevated N+S from 1989 to 2016. The WB treatment was discontinued after 2016, the beginning of the recovery from both the experimental N+S and ambient decline. Stream SO 4 in WB gradually declined after the treatment ended, from ~147 µeq L -1 in 2010-16 to ~126 µeq L -1 in 2017-18. The declining S inputs induced desorption of SO 4 from soil phase surfaces, with stream loss far exceeding precipitation input. At the current rate of recovery, it will be many decades before the WB stream returns to pre-treatment SO 4 concentrations. In contrast, NO 3 is only weakly adsorbed in soil, and WB stream NO 3 concentrations rapidly declined from ~39 µeq L -1 in 2010-16 to ~5 µeq L -1 in 2017-18, comparable to the N-limited EB stream. The acid anions are strongly coupled to base cation chemistry in streams, and there was a distinct hysteretic response of Ca and Mg to the chronic acidification, as (Ca+Mg) increased rapidly during the initial years, followed by declining values due to depletion of the soil exchange complex. This 30-year monitoring study (1989-2019) provides insights into recovery mechanisms from acidic deposition and highlights the role of abiotic processes in soil that mediate nutrient cycling and retention. Finally, documenting the rapid response of N alongside the slower recovery for S identifies the temporal resolution necessary for other whole-watershed recovery studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Improved Infrared Optical Constants from Pressed Pellets: II. Ellipsometric n and k Values for Ammonium Sulfate with Variability Analysis

Infrared spectral imaging is facilitated via the comparison of spectra recorded in situ to a databank of actual or synthetic infrared reflectance spectra. It has recently been shown that reference spectra corresponding to the many different morphological forms of the same chemical can be generated synthetically using the imaginary, k, and real, n, components of the complex refractive index, n~ = n + ik. One method to obtain the n and k vectors is infrared ellipsometry, which measures the changes in amplitude, tan ?, and phase, ?, of polarized light reflected from the sample both as a function of wavenumber and angle of incidence. The method requires specularly reflected light so best results are usually obtained with polished planar samples of large surface area. Due to the difficulties of obtaining such samples, however, we investigate the possibility of pressing powders of neat materials and obtaining the corresponding optical constants from the pellets. In this paper, variability in the sample pellet and preparation method is investigated, as is variability in the fitting procedure for the derived optical constants. The n/k vectors are derived from the measured ellipsometric parameters, tan ? and ?, as they are fit by an oscillator model which yield n(?) and k(?) vectors as a function of wavenumber, ?. Construction of the oscillator model is not automatic and depends on significant input from the analyst as well as the sample’s physical characteristics. For the pellet pressing, the experimental variability was found to be minimized for size-selected powdered samples as gauged by the minimal variance in ? and ? for three different pellets; similarly, the analytical precision for multiple measurements of the same pellet was also quite good, suggesting that a pressed pellet is a viable sample preparation method. The greatest variability came in the analytic fitting procedure with differences up to 20% arising from four different fits to the same data set. The final ellipsometric n/k data are compared to literature values obtained from crystalline (NH4)2SO4 samples as well as single-angle reflectance measurements that also used pressed pellets. Comparison with the previous literature values shows generally good agreement although higher k-values are observed for the independent sets of data derived from pressed pellets. These data are suggested as an improved set of optical constants for (NH4)2SO4.

optical constants, ellipsometry, ammonium sulfate,↗
DOE OSTI2023

Evaluation of the 0.65 Weight Percent Sulfate Solubility Limit for Sludge Batch 10 Based on November 2022 Projections

The Defense Waste Processing Facility (DWPF) is currently preparing to initiate processing of Sludge Batch 10 (SB10), which is comprised of material from Tanks 11H, 13H, 15H, 26F, 40H (heel only), and Alternate Feed Stock-2 and Sodium Reactor Experiment material from H-Canyon. Frit 473 was recommended for sludge-only (SO) and coupled processing with the Salt Waste Processing Facility (SWPF) based on previous assessments of SB10 projections with the DWPF Product Composition Control System glass property models and their associated Measurement Acceptance Region constraints. Savannah River Mission Completion (SRMC) subsequently pursued Wash Cycle Y to further reduce the total sulfur in the sludge batch and increase processing flexibility at DWPF. In October 2022, SRMC System Planning provided an updated SB10 Tank 40H blend baseline projection based on the Tank 51 confirmation sample results. Due to the reduced Na concentration relative to previous SB10 projections, two additional projections based on the addition of 7,000 gallons of caustic were provided in November 2022.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Effect of redox promoters (CeO x and CuO x ) and surface sulfates on the selective catalytic reduction (SCR) of NO with NH 3 by supported V 2 O 5 -WO 3 /TiO 2 catalysts

A series of TiO 2 -supported MO x catalysts (M=V, W, Ce, Cu and S) were investigated for their SCR activity. In situ Raman spectroscopy indicated that the supported MO x phases were completely dispersed as surface sites on the TiO 2 support. In situ IR revealed that surface VO x , WO x and SO x sites anchored at both CeO x /CuO x and TiO 2 sites. The number of surface Lewis acid sites decreased with the addition of basic (CeO x /CuO x ) and acidic (VO x /WO x ) sites in all catalysts, and acidic SO x in the unpromoted and Ce-promoted catalysts. The surface VO x , WO x and SO x sites introduced surface Brønsted acid sites. The redox promoters increased the NO conversion, but SO x impregnation inhibited their effect due to acid (SO x )-base (CeO x /CuO x ) interactions. Finally, the SCR reaction was shown to efficiently proceed via either surface NH 3 * or NH 4 +* species, resolving the long-standing dispute on the involvement of these species in the SCR reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗