Search NASA⌕ Search

SEARCH · Search NASA

Results for “Supersonic flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Computations of the Magnus effect for slender bodies in supersonic flow

A recently reported Parabolized Navier-Stokes code has been employed to compute the supersonic flow field about spinning cone, ogive-cylinder, and boattailed bodies of revolution at moderate incidence. The computations were performed for flow conditions where extensive measurements for wall pressure, boundary layer velocity profiles and Magnus force had been obtained. Comparisons between the computational results and experiment indicate excellent agreement for angles of attack up to six degrees. The comparisons for Magnus effects show that the code accurately predicts the effects of body shape and Mach number for the selected models for Mach numbers in the range of 2-4.

Sturek, W. B.↗
NASA NTRS1988

Experimental comparison of two hot-wire techniques for resolution of turbulent mass flux and local stagnation temperature in supersonic flow

The performance of two constant-temperature normal hot-wire techniques in a supersonic flow is examined. The first technique uses a single-wire and rapid scanning of multiple overheat ratios. Time averages of the signals at all overheats are used to separate the mean and rms mass flux, stagnation temperature and their cross-correlation. The second technique uses a dual-wire probe with each wire operating at different overheat ratios, giving instantaneous mass flux and stagnation temperature. Preliminary results indicate that the separation distance (0.18 mm) between the two hot wires in the dual-wire probe does not introduce significant error. However, the rms mass flux inferred from the dual-wire technique is a factor of two higher than that from the single-wire technique.

Walker, D. A.↗
NASA NTRS1990

Numerical simulations of supersonic flow through oscillating cascade sections

A finite difference code was developed for modeling inviscid, unsteady supersonic flow by solution of the compressible Euler equations. The code uses a deforming grid technique to capture the motion of the airfoils and can model oscillating cascades with any arbitrary interblade phase angle. A flat plate cascade is analyzed, and results are compared with results from a small perturbation theory. The results show very good agreement for both the unsteady pressure distributions and the integrated force predictions. The reason for using the numerical Euler code over a small perturbation theory is the ability to model real airfoils that have thickness and camber. Sample predictions are presented for a cascade of loaded airfoils and show appreciable differences in the unsteady surface pressure distributions when compared with the flat plate results.

Huff, Dennis L.↗
NASA NTRS2017

Effect of Off-Body Laser Discharge on Drag Reduction of Hemisphere Cylinder in Supersonic Flow

The interaction of an off-body laser discharge with a hemisphere cylinder in supersonic flow is investigated. The objectives are 1) experimental determination of the drag reduction and energetic efficiency of the laser discharge, and 2) assessment of the capability for accurate simulation of the interaction. The combined computational and experimental study comprises two phases. In the first phase, laser discharge in quiescent air was examined. The temporal behavior of the shock wave formed by the laser discharge was compared between experiment and simulation and good agreement is observed. In the second phase, the interaction of the laser discharge with a hemisphere cylinder was investigated numerically. Details of the pressure drag reduction and the physics of the interaction of the heated region with the bow shock are included. The drag reduction due to this interaction persisted for about five characteristic times where one characteristic time represents the time for the flow to move a distance equal to the hemisphere radius. The energetic efficiency of laser discharge for the case with 50 mJ energy absorbed by the gas is calculated as 3.22.

Kianvashrad, Nadia↗
NASA NTRS1980

Computation of three-dimensional viscous supersonic flow in inlets

A new approach has been developed for the computation of the three-dimensional viscous supersonic flow with embedded subsonic regions adjacent to solid boundaries and is applied to a mixed-compression supersonic inlet typical of current designs. The approach uses a reduced form of the three-dimensional Navier-Stokes equations so that the resultant equations can be treated as an initial boundary value problem and thus be solved by non-iterative forward marching in space. The numerical procedure utilizes an efficient consistently-split linearized block implicit technique to solve the finite difference analogues to the set of governing partial differential equations.

Buggeln, R. C.↗
NASA NTRS1985

Numerical simulation of viscous supersonic flow over a generic fighter configuration

A procedure is presented, as well as some results, to calculate the flow over a generic fighter configuration. A parabolized marching Navier-Stokes code is used to obtain the solution over a wing-canopy body. The flow conditions simulate supersonic cruise with a freestream Mach number of 2.169 and angles of attack of 4 and 10 deg. The body surface is considered to be an adiabatic wall and the flow is assumed to be turbulent for the given Reynolds number.

Chaussee, D. S.↗
NASA NTRS1980

Supersonic flow development in slotted wind tunnels

The development of test section slot shapes for achieving smooth supersonic Mach number distribution without overexpansion or waviness has, in the past, been largely an experimentally iterative or 'cutand try' procedure for each wind tunnel. To overcome the obvious disadvantages of time and expense involved in such an experimental approach, a simple analytical method has been developed to predict the supersonic flow development in a two-dimensional slotted tunnel given only the variation of open area ratio with downstream distance and the Mach number corresponding to the plenum static pressure. The well known method of characteristics is used with the constraint that it be compatible with the quadratic cross-flow pressure drop boundary condition at the slotted wall. The predicted results from this method agree remarkably well with the experimental calibration data available for some of the existing facilities. The flow mechanism responsible for causing overexpansion in the centerline Mach number distribution with some slot shapes has been brought to light.

Ramaswamy, M. A.↗
NASA NTRS1990

Numerical simulations of supersonic flow through oscillating cascade sections

A finite difference code has been developed for modeling inviscid, unsteady supersonic flow by solution of the compressible Euler equations. The code uses a deforming grid technique to capture the motion of the airfoils and can model oscillating cascades with any arbitrary interblade phase angle. A flat plate cascade is analyzed, and results are compared with results from a small-perturbation theory. The results show very good agreement for both the unsteady pressure distributions and the integrated force predictions. The reason for using the numerical Euler code over a small-perturbation theory is the ability to model 'real' airfoils that have thickness and camber. Sample predictions are presented for a cascade of loaded airfoils and show appreciable differences in the unsteady surface pressure distributions when compared with the flat plate results.

Huff, Dennis L.↗
NASA NTRS1949

Theoretical characteristics in supersonic flow of two types of control surfaces on triangular wings

Methods based on the linearized theory for supersonic flow were used to find the characteristics of two types of control surfaces on thin triangular wings. The first type, the constant-chord partial-span flap, was considered to extend either outboard from the center of the wing or inboard from the wing tip. The second type, the full-triangular-tip flap, was treated only for the case in which the Mach number component normal to the leading edge is supersonic. For each type, expressions were found for the lift, rolling-moment, pitching-moment, and hinge-moment characteristics.

Tucker, Warren A↗
NASA NTRS1992

Spectral solution of inviscid supersonic flows over wedges and axisymmetric cones

A shock-fitted multidomain spectral collocation method is used to solve both steady and unsteady inviscid supersonic flows over bodies. New aspects of the method include two subdomain interface types and a zonal solution procedure to get efficient convergence to steady-state in supersonic regions. Steady-state examples include flow over a sharp cone, a hyperbolic cone and a hyperbolic wedge. For the cone, the exact flow solution is used to show that the method is spectrally accurate. As an example of an unsteady flow, a calculation of the interaction of a free-stream hot ring with the flow over a sharp cone is presented.

Kopriva, David A.↗
NASA NTRS1993

Analysis of supersonic flows using k-epsilon model and the RPLUS code: Progress towards high speed combustor analysis

The problem of interest here is the analysis of chemically reacting flow inside of supersonic ramjet combustors. Two key parameters need to be determined: mixing/combustion efficiency and kinetic energy efficiency. In order to determine these parameters, several potential loss mechanisms must be modeled correctly, including mixing, shear, turbulence, vorticity, shock waves, heat transfer, fuel injector drag, poor wall pressure integral, and chemical dissociation. This document discusses k-epsilon turbulence models for use in the RPLUS code for numerical modeling of combustor flow fields.

Lee, J.↗
NASA NTRS1984

Prediction of vortex shedding from circular and noncircular bodies in supersonic flow

An engineering prediction method and associated computer code NOZVTX to predict nose vortex shedding from circular and noncircular bodies in supersonic flow at angles of attack and roll are presented. The body is represented by either a supersonic panel method for noncircular cross sections or line sources and doublets for circular cross sections, and the lee side vortex wake is modeled by discrete vortices in crossflow planes. The three-dimensional steady flow problem is reduced to a two-dimensional, unsteady, separated flow problem for solution. Comparison of measured and predicted surface pressure distributions, flow field surveys, and aerodynamic characteristics is presented for bodies with circular and noncircular cross-sectional shapes.

Mendenhall, M. R.↗
NASA NTRS1973

Numerical calculation of flow fields about rectangular wings of finite thickness in supersonic flow

The calculation of the outer inviscid flow about a rectangular wing moving at supersonic speeds is reported. The inviscid equations of motion governing the flow generated by the wing form a set of hyperbolic differential equations. The flow field about the rectangular wing is separated into three regions consisting of the forebody, the afterbody, and the wing wake. Solutions for the forebody are obtained using conical flow techniques while the afterbody and the wing wake regions are treated as initial value problems. The numerical solutions are compared in the two dimensional regions with known exact solutions.

Vogel, J. M.↗
NASA NTRS1984

Application of a full potential method for computation of three-dimensional supersonic flows

A nonlinear aerodynamic analysis technique based on the full potential equation in conservative form has been modified to permit treatment of supersonic flows with embedded subsonic regions (typically near the fuselage-canopy juncture and the wing leading edge). Solution procedures for the equations do not require any specific form of geometry or physical grid system. This results in the capability to analyze easily very complex geometries provided the posed problem lies within the isentropic restrictions of the full potential theory. Characteristic signal propagation theory is used to monitor the type dependent flow and a conservative switching scheme is employed to transition from the supersonic marching algorithm to a subsonic relaxation procedure and vice versa. An implicit approximate factorization scheme is used to solve the finite-difference equations. These modifications now permit analysis of fully three-dimensional flowfields including the interference effects due to lifting surface wakes. Improved grid generation capability allows analysis of complete complex aircraft geometries (fuselage, wing, tail, wing wake, and tail wake). Results are presented showing very good correlations with experimental surface pressure data and aerodynamic force data at both design and off-design operating points. Configurations examined include several waverider concepts, an arrow wing-body with wake, an advanced tactical fighter concept, and a fighter forebody-canard configuration.

Jones, K. M.↗
NASA NTRS1976

Conformal mappings for computations of steady, three-dimensional, supersonic flows

The evaluation of steady, supersonic, three-dimensional inviscid flows is considered, taking into account the construction of suitable grids on the basis of a simple conformal mapping. A description is presented of an analytical mapping technique. The technique is illustrated with the aid of examples of mappings, involving nontrivial geometries. Attention is given to a wing-fuselage cross section, a FORTRAN program for the basic mapping, the coupling of mappings, and the equations of motion.

Moretti, G.↗
NASA NTRS1993

Hypersonic engine component experiments in high heat flux, supersonic flow environment

A major concern in advancing the state-of-the-art technologies for hypersonic vehicles is the development of an aeropropulsion system capable of withstanding the sustained high thermal loads expected during hypersonic flight. Even though progress has been made in the computational understanding of fluid dynamics and the physics/chemistry of high speed flight, there is also a need for experimental facilities capable of providing a high heat flux environment for testing component concepts and verifying/calibrating these analyses. A hydrogen/oxygen rocket engine heat source was developed at the NASA Lewis Research Center as one element in a series of facilities at national laboratories designed to fulfill this need. This 'Hot Gas Facility' is capable of providing heat fluxes up to 450 w/sq cm on flat surfaces and up to 5,000 w/sq cm at the leading edge stagnation point of a strut in a supersonic flow stream. Gas temperatures up to 3050 K can also be attained. Two recent experimental programs conducted in this facility are discussed. The objective of the first experiment is to evaluate the erosion and oxidation characteristics of a coating on a cowl leading edge (or strut leading edge) in a supersonic, high heat flux environment. Macrophotographic data from a coated leading edge model show progressive degradation over several thermal cycles at aerothermal conditions representative of high Mach number flight. The objective of the second experiment is to assess the capability of cooling a porous surface exposed to a high temperature, high velocity flow environment and to provide a heat transfer data base for a design procedure. Experimental results from transpiration cooled surfaces in a supersonic flow environment are presented.

Gladden, Herbert J.↗
NASA NTRS1961

Comparison of Experimental and Theoretical Static Aeroelastic Loads and Deflections of a Thin 45 deg Delta Wing in Supersonic Flow

Wind tunnel tests showing the effects of static aeroelasticity for a thin 45 degree delta wing in supersonic flow are presented and compared with theory in the Mach number range 1.30 t o 4.00. Calculated deformations, normal-force coefficients, and pitching-moment coefficients based on a linearized potential theory for subsonic leading edges at a Mach number of 1.30 and a linearized potential theory for supersonic leading edges at Mach numbers of 1.64, 3.00, and 4.00 are shown to compare favorably with the wind-tunnel results. Calculations of these same deformations and coefficients based on piston theory are shown to compare satisfactorily with experiment at a Mach number of 4.00 but not so well at a Mach number of 3.00. A factor modification of piston theory is suggested which improves the correlation of these results with experiment and also with the potential-theory results.

Bennett, Floyd V.↗