Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface segregation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Mineralogy and Geochemistry of Sedimentary Rocks and Eolian Sediments in Gale Crater, Mars: A Review After Six Earth Years of Exploration with Curiosity

The Mars Science Laboratory Curiosity rover arrived at Mars in August 2012 with a primary goal of characterizing the habitability of ancient and modern environments. Curiosity was sent to Gale crater to study a sequence of ∼3.5 Ga old sedimentary rocks that, based on orbital visible and near- to short-wave infrared reflectance spectra, contain secondary minerals that suggest deposition and/or alteration in liquid water. The sedimentary sequence in the lower slopes of Mount Sharp in Gale crater preserves a dramatic shift on early Mars from a relatively warm and wet climate to a cold and dry climate, based on a transition from smectite-bearing strata to sulfate-bearing strata. The rover is equipped with instruments to examine the sedimentology and identify compositional changes in the stratigraphy. The Chemistry and Mineralogy (CheMin) instrument is one of two internal laboratories on Curiosity and includes a transmission X-ray diffractometer (XRD) and X-ray fluorescence (XRF) spectrometer. CheMin measures loose sediment samples scooped from the surface and drilled rock powders, and the XRD provides quantitative mineralogy to a detection limit of ∼1 wt.% for crystalline phases. Curiosity has traversed>20 km since landing and has primarily been exploring an ancient lake environment fed by streams and groundwater. Of the 19 drilled rock samples analyzed by CheMin as of sol 2300 (January 2019), 15 are from fluvio-lacustrine deposits that comprise the Bradbury and Murray formations. Most of these samples were drilled from units that did not have a clear mineralogical signature from orbit. Results from CheMin demonstrate an astounding diversity in the mineralogy of these rocks that signifies geochemical variations in source rocks, transportation mechanisms, and depositional and diagenetic fluids. Most detrital igneous minerals are basaltic, but the discovery in a few samples of abundant silicate minerals that usually crystallize from evolved magmas on Earth remains enigmatic. Trioctahedral smectite and magnetite at the base of the section may have formed from low-salinity pore waters with a circumneutral pH in lake sediments. A transition to dioctahedral smectite, hematite, and Ca-sulfate going up section suggests a change to more saline and oxidative aqueous conditions in the lake waters themselves and/or in diagenetic fluids. Perhaps one of the biggest mysteries revealed by CheMin is the high abundance of X-ray amorphous materials (15–73 wt.%) in all samples drilled or scooped to date. CheMin has analyzed three modern eolian sands, which have helped constrain sediment transport and mineral segregation across the active Bagnold Dune Field. Ancient eolian sandstones drilled from the Stimson formation differ from modern eolian sands in that they contain abundant magnetite but no olivine, suggesting that diagenetic processes led to the alteration of olivine to release Fe(II) and precipitate magnetite. Fracture-associated halos in the Stimson and the Murray formations are evidence for complex aqueous processes long after the streams and lakes vanished from Gale crater. The sedimentology and composition of the rocks analyzed by Curiosity demonstrate that habitable environments persisted intermittently on the surface or in the subsurface of Gale crater for perhaps more than a billion years.

E.B. Rampe↗
NASA NTRS2022

Yonkers Urban Development II: Leveraging NASA Earth Observations to Support Modeling Urban Cooling Interventions and Urban Heat Vulnerability in Yonkers, New York

The City of Yonkers, New York, located in Westchester County, is experiencing rising temperatures which are a growing threat to the health and safety of its residents. Furthermore, the risk of heat-related illnesses and mortality disproportionately affects neighborhoods in Yonkers historically subjected to race-based housing segregation. To better understand these inequities, Groundwork Hudson Valley and NASA DEVELOP collaborated for a second term to evaluate community-level heat vulnerability, landcover distribution, street-level thermal comfort, and modeled urban cooling interventions. This team applied 2019 5-year American Community Survey (ACS) data and social and biophysical heat vulnerability variables established by the New York State Department of Health (NYSDOH), along with land surface temperature (LST) data collected from Landsat 8 Thermal Infrared Sensor (TIRS), and ISS ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) to identify communities in Yonkers in need of prioritized cooling intervention at the census tract level. Data from the Real-Time Mesoscale Analysis (RTMA) provided relevant meteorological data for the ENVI-met model to conduct street-level thermal observations and model tree canopy cooling interventions in the Yonkers neighborhoods of Kimball and Old 7th Ward. The project results will support the prioritization and equitable distribution of cooling infrastructure in identified neighborhoods. Additionally, Groundwork Hudson Valley will use the analyses as a heat literacy tool to improve advocacy efforts and inform both residents and officials about how investment in deliberate modification to tree canopy cover improves the city’s thermal environment and helps mitigate extreme heat.

Tamara Barbakova↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Meteorites: Experiments and Spectroscopy

The session "Meteorites: Experiments and Spectroscopy" included the following reports:The Suitability of Laser Induced Breakdown Spectroscopy for Determining the Compositions of Extraterrestrial Material; Deconvolving Terrestrial Alteration Mineral Spectral Signatures from Meteorite Reflectance Measurements; Impacts of Ions and Micrometeorites on Mineral Surfaces: Reflectance and Chemical Changes Found in Ordinary Chondrites; FT-IR Micro-spectroscopy of Fine-grained Planetary Materials: Further Results; Effusion Cell Measurements of the Vapor Pressure of Cobalt at Temperatures up to 2000K: Comparisons with Iron and Nickel; Kinetics of Fe2+-Mg Order-Disorder in P21/c Pigeonite: Implications for Cooling Rates Calculations; Compressional and Shear Wave Velocities in Meteorites; Chemical and Mineralogical Size Segregation in the Impact Disruption of Anhydrous Stone Meteorites; and Shock Pressures of Impacts vs. Crystallization Pressures of Shock-induced Melt Veins of the chondrites.

Source record↗
NASA NTRS1977

Germanium-silicon solid solutions

An experiment on melting and directional crystallization of an antimony (Sb) doped germanium silicon (GeSi) solid solution was designed for the Apollo-Soyuz Test Project (ASTP) to study the possibility of using zero-g conditions for obtaining solid-solution monocrystals with uniformly distributed components. Crystallization in the zero-g environment did not occur under ideal stationary growth and segregation conditions. Crystallization under zero-g conditions revealed the heterogeneous nature of Si and Sb distribution in the cross sections of crystals. The presence of the radial thermal gradient in the multipurpose furnace could be one of the reasons for such Si and Sb distribution. The structure of space-grown crystals correlates with the nature of heterogeneities of Si and Sb distribution in crystals. The type of surface morphology and the contour observed in space-grown crystals were never observed in ground-based crystals and indicate the absence of wetting of the graphitized walls of the ampoule by the melt during melting and crystallization.

Zemskov, V. S.↗
NASA NTRS1987

Studies of the Virgo cluster. VI - Morphological and kinematical structure of the Virgo cluster

The structure of the Virgo cluster is analyzed on the basis of the positions, Hubble types, and radial velocities of 1277 Virgo cluster galaxies. The surface distribution of galaxies is considered according to type, and is discussed using maps, isopleths, strip counts, and radial-density distributions. It is found that the Virgo cluster shows pronounced double structure. The main concentration has a large velocity dispersion and is made up predominantly of early-type galaxies, while the secondary concentration has a much smaller velocity dispersion and contains late types. There is a strong spatial segregation of the Hubble types, the early-type galaxies being more concentrated toward the cluster center. There is significant substructure in the cluster core. The irregularity of the Virgo cluster in both configuration and velocity space shows that the core and the envelope are still forming, and hence that the cluster is young.

Binggeli, Bruno↗
NASA NTRS1988

Effects of crucible wetting during solidification of immiscible Pb-Zn

Many industrial uses for liquid phase miscibility gap alloys are proposed. However, the commercial production of these alloys into useful ingots with a reasonable amount of homogeneity is arduous because of their immiscibility in the liquid state. In the low-g environment of space gravitational settling forces are abated, thus solidification of an immiscible alloys with a uniform distribution of phases becomes feasible. Elimination of gravitational settling and coalescence processes in low-g also makes possible the study of other separation and coarsening mechanisms. Even with gravitational separation forces reduced, many low-g experiments have resulted in severely segregated structures. The segregation in many cases was due to preferential wetting of the crucible by one of the immiscible liquids. The objective was to analyze the wetting behavior of Pb-Zn alloys on various crucible materials in an effort to identify a crucible in which the fluid flow induced by preferential wetting is minimized. It is proposed that by choosing the crucible for a particular alloy so that the difference in surface energy between the solid and two liqud phases is minimized, the effects of preferential wetting can be diminished and possibly avoided. Qualitative experiments were conducted and have shown the competitive wetting behavior of the immiscible Pb-Zn system and 13 different crucible materials.

Degroh, Henry C., III↗
NASA NTRS1989

Effects of crucible wetting during solidification of immiscible Pb-Zn alloys

Many industrial uses for liquid phase miscibility gap alloys are proposed. However, the commercial production of these alloys into useful ingots with a reasonable amount of homogeneity is arduous because of their immiscibility in the liquid state. In the low-g environment of space gravitational settling forces are abated, thus solidification of an immiscible alloy with a uniform distribution of phases becomes feasible. Elimination of gravitational settling and coalescence processes in low-g also makes possible the study of other separation and coarsening mechanisms. Even with gravitational separation forces reduced, many low-g experiments have resulted in severely segregated structures. The segregation in many cases was due to preferential wetting of the crucible by one of the immiscible liquids. The objective was to analyze the wetting behavior of Pb-Zn alloys on various crucible materials in an effort to identify a crucible in which the fluid flow induced by preferential wetting is minimized. It is proposed that by choosing the crucible for a particular alloy so that the difference in surface energy between the solid and two liquid phases is minimized, the effects of preferential wetting can be diminished and possibly avoided. Qualitative experiments were conducted and have shown the competitive wetting behavior of the immiscible Pb-Zn system and 13 different crucible materials.

De Groh, H. C., III↗
NASA NTRS1986

Early evolution of the earth - Accretion, atmosphere formation, and thermal history

The thermal and atmospheric evolution of the earth growing planetesimal impacts are studied. The generation of an H2O protoatmosphere is examined, and the surface temperatures are estimated. The evolution of an impact-induced H2O atmosphere is analyzed. Consideration is given to the formation time of a 'magma ocean'and internal water budgets. The thermal history of an accreting earth is reviewed. The wet convection and greenhouse effects are discussed, and the role of Fe oxidation on the evolution of an impact-induced H2O atmopshere is described. The relationship between differentiation processes and core segregation, the H2O and FeO content of the mantle, and the origin of the hydrosphere is also examined.

Abe, Yutaka↗
NASA NTRS1997

Functional specializations in human cerebral cortex analyzed using the Visible Man surface-based atlas

We used surface-based representations to analyze functional specializations in the human cerebral cortex. A computerized reconstruction of the cortical surface of the Visible Man digital atlas was generated and transformed to the Talairach coordinate system. This surface was also flattened and used to establish a surface-based coordinate system that respects the topology of the cortical sheet. The linkage between two-dimensional and three-dimensional representations allows the locations of published neuroimaging activation foci to be stereotaxically projected onto the Visible Man cortical flat map. An analysis of two activation studies related to the hearing and reading of music and of words illustrates how this approach permits the systematic estimation of the degree of functional segregation and of potential functional overlap for different aspects of sensory processing.

Non-NASA Center↗
NASA NTRS2024

San Joaquin Valley Health & Air Quality II: Assessing Urban Heat Island Distribution and its Intersections with Air Quality to Understand Converging Vulnerabilities

The city of Stockton, California, located within the San Joaquin Valley (SJV), is a major hub for agricultural production and has endured the continuous threat to community health from nitrogen dioxide (NO 2 ) and increasing temperatures. The convergence of these issues occurs within historically segregated communities that are disproportionately facing health risks related to heat and air quality. Little Manila Rising (LMR), a social and environmental justice (EJ) advocacy non-profit, partnered with NASA DEVELOP for a second term project to evaluate county wide urban heat islands, sociodemographic vulnerability, landcover classification, and the convergence of these variables. We utilized Landsat 8 Thermal Infrared Sensor (TIRS) and Operational Land Imager (OLI) data to produce a land surface temperature (LST) and Normalized Difference Vegetation Index map. They added Centers for Disease Control (CDC) socioeconomic data from 2020 to identify which communities in Stockton were more susceptible to these environmental factors. Additionally, we used NAIP imagery to create a landcover map differentiating developed infrastructure from tree canopy cover. We discovered that south Stockton, where LMR resides, had the worst convergence of heat, air pollution, low canopy coverage and sociodemographic vulnerability compared to northern and rural parts of the city. This was further substantiated by statistical analysis showing a strong positive relationship between areas of high LST and low vegetation. The results provided LMR with compelling evidence to use in their EJ advocacy, and in their efforts to inform state officials of the discriminatory issues they face.

Urban Heat Islands↗
NASA NTRS1984

Crystal nucleation and glass formation in metallic alloy melts

Homogeneous nucleation, containerless solidification, and bulk formation of metallic glasses are discussed. Homogeneous nucleation is not a limiting factor for metallic glass formation at slow cooling rates if the reduced glass transition temperature is high enough. Such glasses can be made in bulk if heterogeneous nucleants are removed. Containerless processing eleminates potential sources of nucleants, but as drop tube experiments on the Pd-Si alloys show, the free surface may still be a very effective heterogeneous nucleant. Combination of etching and heating in vacuum or fluxing can be effective for cleaning fairly large ingots of nucleants. Reduced gravity processing has a potentially useful role in the fluxing technique, for example to keep large metallic ingots surrounded by a low density, low fluidity flux if this proved difficult under ground conditions. For systems where heterogeneous nucleants in the bulk of the ingot need gravity to segregate to the flux-metal interface, reduced gravity processing may not be appropriate for bulk glass formation.

Spaepen, F.↗
NASA NTRS1994

Crystal growth and fluid mechanics problems in directional solidification

Broadly speaking, our efforts have been concentrated in two aspects of directional solidification: (A) a more complete theoretical understanding of convection effects in a Bridgman apparatus; and (B) a clear understanding of scalings of various features of dendritic crystal growth in the sensitive limit of small capillary effects. For studies that fall within class A, the principal objectives are as follows: (A1) Derive analytical formulas for segregation, interfacial shape and fluid velocities in mathematically amenable asymptotic limits. (A2) Numerically verify and extend asymptotic results to other ranges of parameter space with a view to a broader physical understanding of the general trends. With respect to studies that fall within class B, the principal objectives include answering the following questions about dendritic crystal growth: (B1) Are there unsteady dendrite solutions in 2-D to the completely nonlinear time evolving equations in the small surface tension limit with only a locally steady tip region with well defined tip radius and velocity? Is anisotropy in surface tension necessary for the existence of such solutions as it is for a true steady state needle crystal? How does the size of such a local region depend on capillary effects, anisotropy and undercooling? (B2) How do the different control parameters affect the nonlinear amplification of tip noise and dendritic side branch coarsening?

Tanveer, Saleh↗
NASA NTRS1976

Implications of an internal dynamo for the thermal history of Mercury

Constraints placed on the thermal evolution of Mercury by the dynamo model of the planet's magnetic field are investigated. It is assumed that Mercury is a differentiated planet possessing an iron-nickel core with a radius approximately three-fourths of the planetary radius, that the mantle is made of silicates with thermal and rheological properties similar to those of earth's upper mantle, and that differentiation was a global process which resulted in the removal of radioactive heat sources from the core and the upward segregation of heat sources in the mantle. These assumptions are found to lead to the conclusion that the existence of a molten core requires the retention of a minimum concentration of heat sources throughout the mantle, the value being comparable to the mantle-wide average concentration for earth. Thus, it is suggested that the differentiation of Mercury could not have resulted in the complete removal of heat sources from the mantle into a crust near the planet's surface.

Cassen, P.↗
NASA NTRS1986

A nonmagmatic origin of group-IIE iron meteorites

New neutron activation data on 10 elements in 12 IIE and IIE-related irons lead to a reclassification of several irons. Seymchan and Lonaconing are removed from IIE, and Leshan added. Four IIE members are designated IIE-An to call attention to some anomalous properties. The eight normal IIE members define element-Ni trends generally similar to those in the nonmagmatic group IAB; the small negative slopes on W-Ni and Ir-Ni diagrams are strongly indicative of a nonmagmatic origin of the IIE irons. It is proposed that IIE irons like IAB irons originated as individual pools of impact-produced melt in the near-surface region of a chondritic parent body. The positive As-Ni and Au-Ni trends are the only evidence suggesting fractional crystallization, but their slopes are lower than those in magmatic group IIIAB, and only slightly higher than those of Cu and Sb in IAB. It is suggested that the S and C contents of the IIE precursor materials were much lower than those of the IAB precursors, thus higher temperatures were required to generate enough metallic melt to segregate into pools. These higher temperatures are also reflected in the nonchondritic compositions of the silicate inclusions.

Wasson, J. T.↗
NASA NTRS1992

The effect of compositionally-generated elastic stresses on morphological instability during directional solidification

The effect of compositionally-generated elastic stresses on the conditions for morphological instability during directional solidification of a dilute, ideal binary alloy is investigated using the Gibbs-Thomson equations for an elastically-stressed solid with zero surface stress in equilibrium with a liquid. It is found that these stresses lead to a small stabilization of the Mullins and Sekerka cellular mode of instability. The steady mode is stabilized by a stress-induced modification to the interfacial concentration of the solid, which in turn alters the amount of solute rejected to inhibit the growth of perturbations. The presence of elastic stresses could generate a new oscillatory instability which is most likely to be found in experiments near absolute stability for materials with segregation coefficients near unity and large solute expansion coefficients.

Spencer, B. J.↗
NASA NTRS1978

Magma production and migration within the moon

Partial melting is likely to have occurred throughout much of the moon due to heating during accretion and the volumetric heating of radioactive isotopes. Important problems that have received relatively little attention concern the migration of the resulting magmas to form surface or near surface volcanic rock. In the paper the basic mechanism for the migration of the magma through the lunar asthenosphere is considered. A porous flow model is proposed. The magma behaves like a liquid flowing through a porous matrix. The volume fraction of liquid present determines the saturated porosity. The differential buoyancy of the magma drives it upwards. It is shown that the per cent partial melt in the lunar interior will only slightly exceed that required to provide interconnecting porosity. Assuming that the radioactive isotopes are preferentially segregated into the magma, the time dependence of the partial melting of the lunar interior is found. It is shown that the total degree of partial melting of the deep lunar interior is likely to be between five and ten per cent.

Turcotte, D. L.↗
NASA NTRS1988

Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain, and Kane Springs Wash volcanic centers, Southern Nevada

Comparative lab spectra and Thematic Mapper imagery investigations at 3 Tertiary calderas in southern Nevada indicate that desert varnish is absorbant relative to underlying host rocks below about 0.7 to 1.3 microns, depending on mafic affinity of the sample, but less absorbant than mafic host rocks at higher wavelengths. Desert varnish occurs chiefly as thin impregnating films. Distribution of significant varnish accumulations is sparse and localized, occurring chiefly in surface recesses. These relationships result in the longer wavelength bands and high 5/2 values over felsic units with extensive desert varnish coatings. These lithologic, petrochemical, and desert varnish controlled spectral responses lead to characteristic TM band relationships which tend to correlate with conventionally mappable geologic formations. The concept of a Rock-Varnish Index (RVI) is introduced to help distinguish rocks with a potentially detectable varnish. Felsic rocks have a high RVI, and those with extensive desert varnish behave differently, spectrally, from those without extensive varnish. The spectrally distinctive volcanic formations at Stonewall Mountain provide excellent statistical class segregation on supervised classification images. A binary decision rule flow-diagram is presented to aid TM imagery analysis over volcanic terrane in semi-arid environments.

Taranik, James V.↗
NASA NTRS2006

Metallurgical Design and Development of NASA Crawler/Transporter Tread Belt Shoe Castings

The NASA Crawler/Transporters (CT-1 and CT-2) used to transport the Space Shuffles are one of the largest tracked vehicles in existence today. Two of these machines have been used to move space flight vehicles at Kennedy Space Center since the Apollo missions of the 1960's and relatively few modifications have been made to keep them operational. In September of 2003 during normal Crawler/Transporter operations cracks were observed along the roller pad surfaces of several tread belt shoes. Further examination showed 20 cracked shoes on CT-1 and 40 cracked shoes on CT-2 and a formal failure analysis investigation was undertaken while the cracked shoes were replaced. Six shoes were cross-sectioned with the fracture surfaces exposed and it was determined that the cracks were due to fatigue that initiated on the internal casting web channels at pre-existing casting defects and propagated through thickness both transgranularly and intergranularly between internal shrinkage cavities, porosity, and along austenitic and ferritic grain boundaries. The original shoes were cast during the 1960's using a modified 861330 steel with slightly higher levels of chromium, nickel and molybdenum followed by heat treatment to achieve a minimum tensile strength of 11 Oksi. Subsequent metallurgical analysis of the tread belt shoes after multiple failures showed excessive internal defects, alloy segregation, a nonuniform ferritic/ bainitic/martensitic microstructure, and low average tensile properties indicative of poor casting and poor heat-treatment. As a result, NASA funded an initiative to replace all of the tread belt shoes on both crawler/transporters along with a redesign of the alloy, manufacturing, and heat-treatment to create a homogeneous cast structure with uniform mechanical and metallurgical properties. ME Global, a wholly owned subsidiary of ME Elecmetal based in Minneapolis, MN was selected as manufacturing and design partner to develop the new shoes and this paper describes the research, development, and manufacturing that resulted in the successful delivery of 1044 new Crawler/Transporter tread belt shoes all meeting rigid metallurgical and mechanical design criteria derived from finite element modeling of the stress loads required for safe space shuttle transport.

Parker, Donald S.↗