Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface topography”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Radar measurements of Martian topography and surface properties - The 1971 and 1973 oppositions

The Goldstone radar system was used at a wavelength of 12.6 cm to probe the Martian surface during the 1973 opposition. Measurements of range and reflected power were made at least weekly between July 12 and November 24. Surface cells isolated by the radar system were 8 km E-W by 110 km N-S. Altitudes were calculated from signal time delays measured relative to a triaxial ellipsoid and were combined with altitudes measured during the 1971 opposition. Contours of constant altitude were calculated at 200 m intervals between latitudes -14 and -22 deg. These contours are presented in conjunction with Mars charts derived from Mariner 9 television pictures. Reflected power was measured at angles of incidence between -5 and +5 deg. These measurements were combined with those obtained during the 1971 opposition.

Downs, G. S.↗
NASA NTRS1983

Nonlinear damage analysis: Postulate and evaluation

The objective of this program is to assess the viability of a damage postulate which asserts that the fatigue resistance curve of a metal is history dependent due to inelastic action. The study focusses on OFE copper because this simple model material accentuates the inelastic action central to the damage postulate. Data relevant to damage evolution and crack initiation are developed via a study of surface topography. The effects of surface layer residual stresses are explored via comparative testing as were the effects in initial prestraining. The results of the study very clearly show the deformation history dependence of the fatigue resistance of OFE copper. Furthermore the concept of deformation history dependence is shown to qualitatively explain the fatigue resistance of all histories considered. Likewise quantitative predictions for block cycle histories are found to accurately track the observed results. In this respect the assertion that damage per cycle for a given level of the damage parameter is deformation history dependent appears to be physically justified.

Leis, B. N.↗
NASA NTRS1988

Earth Observing System (EOS) advanced altimetry

In the post-TOPEX era, satellite radar altimeters will be developed with the capability of measuring the earth's surface topography over a wide swath of coverage, rather than just at the satellite's nadir. The identification of potential spacecraft flight missions in the future was studied. The best opportunity was found to be the Earth Observing System (EOS). It is felt that an instrument system that has a broad appeal to the earth sciences community stands a much better chance of being selected as an EOS instrument. Consequently, the Topography and Rain Radar Imager (TARRI) will be proposed as a system that has the capability to profile the Earth's topography regardless of the surface type. The horizontal and height resolutions of interest are obviously significantly different over land, ice, and water; but, the use of radar to provide an all-weather observation capability is applicable to the whole earth. The scientific guidance for the design and development of this instrument and the eventual scientific utilization of the data produced by the TARRI will be provided by seven science teams. The teams are formed around scientific disciplines and are titled: Geology/Geophysics, Hydrology/Rain, Oceanography, Ice/Snow, Geodesy/Orbit/Attitude, Cartography, and Surface Properties/Techniques.

Parsons, C. L.↗
NASA NTRS1997

The Nature of Comet Materials and Attachment to Them

Because cometary surfaces are likely to be far colder and of a different composition and surface topography than other planetary surfaces with which we have experience, there are some new considerations that must be examined in regards to placing and attaching instrumented packages or sample return devices in or on their surfaces. The qualitative analysis of the problem of embedding hardware in a comet icy core is limited to only one of several means for the purposes of this discussion. This means can be characterized as a kinetic impact piercing device. Such kinetic impact piercing device may be used to attach the feet of an instrumented package on the surface or it may be the means for implanting the package in the icy core below the mantle. The functional requirement is to implant a device in the icy core and by mechanical means, prevent the device from being ejected back into space.

Stephens, James↗
NASA NTRS1990

The diffusive boundary layer of sediments: oxygen microgradients over a microbial mat

Oxygen microelectrodes were used to analyze the distribution of the diffusive boundary layer (DBL) at the sediment-water interface in relation to surface topography and flow velocity. The sediment, collected from saline ponds, was covered by a microbial mat that had high oxygen consumption rate and well-defined surface structure. Diffusion through the DBL constituted an important rate limitation to the oxygen uptake of the sediment. The mean effective DBL thickness decreased from 0.59 to 0.16 mm as the flow velocity of the overlying water was increased from 0.3 to 7.7 cm s-1 (measured 1 cm above the mat). The oxygen uptake rate concurrently increased from 3.9 to 9.4 nmol cm-2 min-1. The effects of surface roughness and topography on the thickness and distribution of the DBL were studied by three-dimensional mapping of the sediment-water interface and the upper DBL boundary at 0.1-mm spatial resolution. The DBL boundary followed mat structures that had characteristic dimensions > 1/2 DBL thickness but the DBL had a dampened relief relative to the mat. The effective surface area of the sediment-water interface and of the upper DBL boundary were 31 and 14% larger, respectively, than a flat plane. Surface topography thereby increased the oxygen flux across the sediment-water interface by 49% relative to a one-dimensional diffusion flux calculated from the vertical oxygen microgradients.

NASA Center ARC↗
NASA NTRS2013

Engineered Surfaces for Mitigation of Insect Residue Adhesion

Maintenance of laminar flow under operational flight conditions is being investigated under NASA s Environmentally Responsible Aviation (ERA) Program. Among the challenges with natural laminar flow is the accretion of residues from insect impacts incurred during takeoff or landing. Depending on air speed, temperature, and wing structure, the critical residue height for laminar flow disruption can be as low as 4 microns near the leading edge. In this study, engineered surfaces designed to minimize insect residue adhesion were examined. The coatings studied included chemical compositions containing functional groups typically associated with abhesive (non-stick) surfaces. To reduce surface contact by liquids and enhance abhesion, the engineered surfaces consisted of these coatings doped with particulate additives to generate random surface topography, as well as coatings applied to laser ablated surfaces having precision patterned topographies. Performance evaluation of these surfaces included contact angle goniometry of pristine coatings and profilometry of surfaces after insect impacts were incurred in laboratory scale tests, wind tunnel tests and flight tests. The results illustrate the complexity of designing antifouling surfaces for effective insect contamination mitigation under dynamic conditions and suggest that superhydrophobic surfaces may not be the most effective solution for preventing insect contamination on aircraft wing leading edges.

Siochi, Emilie J.↗
DOE OSTI2020

Size-dependent stochastic tensile properties in additively manufactured 316L stainless steel

Recent work in metal additive manufacturing (AM) suggests that mechanical properties may vary with feature size; however, these studies do not provide a statistically robust description of this phenomenon, nor do they provide a clear causal mechanism. Because of the huge design freedom afforded by 3D printing, AM parts typically contain a range of feature sizes, with particular interest in smaller features, so the size effect must be well understood in order to make informed design decisions. This work investigates the effect of feature size on the stochastic mechanical performance of laser powder bed fusion tensile specimens. A high-throughput tensile testing method was used to characterize the effect of specimen size on strength, elastic modulus and elongation in a statistically meaningful way. The effective yield strength, ultimate tensile strength and modulus decreased strongly with decreasing specimen size: all three properties were reduced by nearly a factor of two as feature dimensions were scaled down from 6.25 mm to 0.4 mm. Hardness and microstructural observations indicate that this size dependence was not due to an intrinsic change in material properties, but instead the effects of surface roughness on the geometry of the specimens. Finite element analysis using explicit representations of surface topography shows the critical role surface features play in creating stress concentrations that trigger deformation and subsequent fracture. The experimental and finite element results provide the tools needed to make corrections in the design process to more accurately predict the performance of AM components.

316L stainless steel↗
DOE OSTI2023

Thermal hysteretic behavior and negative magnetoresistance in the charge density wave material EuTe 4

EuTe 4 is a van der Waals material exhibiting a charge density wave (CDW) with a large thermal hysteresis in the resistivity and CDW gap. In this paper, we systematically study the electronic structure and transport properties of EuTe 4 using high-resolution angle-resolved photoemission spectroscopy (ARPES), magnetoresistance (MR) measurements, and scanning tunneling microscopy (STM). Here, we observe a CDW gap of ~ 200meV at low temperatures that persists up to 400 K, suggesting that the CDW transition occurs at a much higher temperature. The ARPES intensity near the Fermi level shows large thermal hysteretic behavior, consistent with the resistivity measurement. The hysteresis in the resistivity measurement does not change under a magnetic field up to 7 T, excluding the thermal magnetic hysteretic effect. Instead, the surface topography measured with STM shows surface domains with different CDW trimerization directions, which may be important for the thermal hysteretic behavior. Interestingly, we reveal a large negative MR at low temperatures that can be associated with the canting of magnetically ordered Eu spins. Our results shed light on the understanding of magnetic, transport, and electronic properties of EuTe 4 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Understanding Fracture Aperture and Permeability Evolution due to Carbonate Mineralization Utilizing 3D Printing

Caprock formations are a crucial part of subsurface-engineered systems. Composed largely of shale, caprocks act as natural barriers that prevent the upward migration of fluids, thereby ensuring the containment of stored substances in subsurface formations. Fractures in these formations are potential leakage pathways for stored fluids. Mineral precipitation reactions in these fractures, particularly calcite, can significantly restrict the fluid permeability, reducing leakage potential. However, predictive capabilities of mineral precipitation in fractures and associated permeability evolution are limited due to a lack of fundamental understanding of such reactions in natural samples, complicated by mineral heterogeneity and the complexity of the fracture structure. In this study, 3D-printed fracture samples are used to understand the impact of carbonate mineralization on fracture aperture and permeability evolution. Samples were printed using a digital light processing (DLP) 3D printer and commercial liquid resin. Calcite precipitation was first tested on printed 2D films before conducting plug flow column experiments aimed to understand fracture permeability changes due to mineral precipitation. Contact angle measurement and Fourier transform infrared (FTIR) spectroscopy on printed 2D films show evidence of a substantial amount of surface energy for calcite nucleation and precipitation. Surface topography analysis of printed fractured surfaces reveals comparable values, highlighting the high replicability of the printed samples. During the column experiments, the permeability reduces exponentially due to a decrease in fracture aperture. Reductions in fracture aperture estimated from effluent concentration and 3D X-ray computed tomography (CT) show comparable results. Moreover, 3D X-ray CT images suggest the impact of local flow velocities on precipitation. The insights gained from this research contribute to a deeper understanding of the permeability evolution due to carbonate mineralization in caprock formations.

3D printing↗
NASA NTRS1991

Mean sea surface and gravity investigations using TOPEX/Poseidon altimeter data

From a broad point of view, we will be concerned with studying global ocean circulation patterns on the basis of ocean surface determinations with geoid undulation information. In addition, we will study local variations of the gravity field implied by the altimeter data. These general goals are reflected in the title of our investigation. To meet our general goal, we have defined a number of specific objectives: (1) sea surface topography representation; (2) mean sea surface determination; (3) development of local geoid models; (4) mean sea surface comparisons; (5) sea surface topographic files; and (6) gravity anomaly determination.

Rapp, Richard H.↗
NASA NTRS1998

The Laser Vegetation Imaging Sensor (LVIS): An Airborne Laser Altimeter for Mapping Vegetation and Topography

The Laser Vegetation Imaging Sensor (LVIS) is an airborne laser altimeter designed to quickly and extensively map surface topography as well as the relative heights of other reflecting surfaces within the laser footprint. Since 1997, this instrument has primarily been used as the airborne simulator for the Vegetation Canopy Lidar (VCL) mission, a spaceborne mission designed to measure tree height, vertical structure and ground topography (including sub-canopy topography). LVIS is capable of operating from 500 m to 10 km above ground level with footprint sizes from 1 to 60 m. Laser footprints can be randomly spaced within the 7 degree telescope field-of-view, constrained only by the operating frequency of the ND:YAG Q-switched laser (500 Hz). A significant innovation of the LVIS altimeter is that all ranging, waveform recording, and range gating are performed using a single digitizer, clock base, and detector. A portion of the outgoing laser pulse is fiber-optically fed into the detector used to collect the return signal and this entire time history of the outgoing and return pulses is digitized at 500 Msamp/sec. The ground return is then located using software digital signal processing, even in the presence of visibly opaque clouds. The surface height distribution of all reflecting surfaces within the laser footprint can be determined, for example, tree height and ground elevation. To date, the LVIS system has been used to monitor topographic change at Long Valley caldera, CA, as part of NASA's Topography and Surface Change program, and to map tree structure and sub-canopy topography at the La Selva Biological Research Station in Costa Rica, as part of the pre-launch calibration activities for the VCL mission. We present results that show the laser altimeter consistently and accurately maps surface topography, including sub-canopy topography, and vegetation height and structure. These results confirm the measurement concept of VCL and highlight the benefits of airborne prototypes of spaceborne instruments.

Bryan, J.↗
NASA NTRS1987

The evolution of topography on a comet

The evolution of cometary surface topography is presently modeled in terms of a focusing of thermal energy due to topographical concavity. The model encompasses incident sunlight, shadowing, molecular sublimation, and mutual radiative heating by the walls of a circle-segment cross section trench, which has a 'lensing' effect. After a large number of perihelion passages, the net effect of trench bottom sublimation losses will be the accentuation of topographical concavities. The comet surface sublimation, comet-splitting, and comet surface jet-formation consequences of this model are discussed.

Colwell, Joshua E.↗
NASA NTRS1991

An analytic model for the Phobos surface

Analytic expressions are derived to model the surface topography and the normal to the surface of Phobos. The analytic expressions are comprised of a spherical harmonic expansion for the global figure of Phobos, augmented by addition terms for the large crater Stickney and other craters. Over 300 craters were measured in more than 100 Viking Orbiter images to produce the model. In general, the largest craters were measured since they have a significant effect on topography. The topographic model derived has a global spatial and topographic accuracy ranging from about 100 m in areas having the highest resolution and convergent, stereo coverage, up to 500 m in the poorest areas.

Duxbury, Thomas C.↗
NASA NTRS1975

Summary of Skylab S-193 altimeter altitude results

The SKYLAB S-193 altimeter altitude results are presented in a concise format for further use and analysis by the scientific community. The altimeter mission and instrumentation is described along with the altimeter processing techniques and values of parameters used for processing. The determination of reference orbits is discussed, and the tracking systems utilized are tabulated. Techniques for determining satellite pointing are presented and a tabulation of pointing for each data mission included. The geographical location, the ocean bottom topography, the altimeter-determined ocean surface topography, and the altimeter automatic gain control history is presented. Some typical applications of this data are suggested.

Mcgoogan, J. T.↗
NASA NTRS1983

Surface analysis of graphite fiber reinforced polyimide composites

Several techniques have been used to establish the effect of different surface pretreatments on graphite-polyimide composites. Composites were prepared from Celion 6000 graphite fibers and the polyimide LARC-160. Pretreatments included mechanical abrasion, chemical etching and light irradiation. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were used in the analysis. Contact angle of five different liquids of varying surface tensions were measured on the composites. SEM results showed polymer-rich peaks and polymer-poor valleys conforming to the pattern of the release cloth used durng fabrication. Mechanically treated and light irradiated samples showed varying degrees of polymer peak removal, with some degradation down to the graphite fibers. Minimal changes in surface topography were observed on concentrations of surface fluorine even after pretreatment. The light irradiation pretreatment was most effective at reducing surface fluorine concentrations whereas chemical pretreatment was the least effective. Critical surface tensions correlated directly with the surface fluorine to carbon ratios as calculated from XPS.

Messick, D. L.↗
NASA NTRS1987

Spaceborne imaging radar on EOS

A multiparameter synthetic aperture imaging radar is planned as a facility instrument for the Earth Orbiting System (EOS). This sensor will operate at L, C, and X and at all possible polarizations (HH, VV, HV, VH), thus allowing the acquisition of detailed information about the surface physical and electrical properties. When combined with the visible and IR imaging spectrometry data and the surface topography, a full description of the surface structure, composition, thermal properties and physical properties could then be extracted.

Elachi, Charles↗
NASA NTRS1993

Magellan Mission

The Magellan spacecraft was launched from Cape Kennedy on 4 May 1989 and was inserted into orbit around Venus on 10 Aug. 1990. The Magellan spacecraft carries a radar instrument that makes synthetic aperture radar (SAR) images of the surface, measures the altitude of the Venusian surface directly below the spacecraft, and obtains radiometric observations of the surface. Radar and radiometric observations of the Venusian surface commenced on 15 Sep. 1990 and continued until 15 Sep. 1992. Gravity observations began on 24 Sep. 1992 and will continue until late May 1993. The radar observations produced SAR images and surface topography for 99 percent of the surface. These radar observations support the objective of improving the knowledge of the geological history of Venus by analysis of surface morphology and the processes that control them. The gravity observations that are being conducted now support the Magellan objective of improving the knowledge of the geophysics of Venus, principally its density distribution and dynamics. Also, Magellan generated more digital planetary image data than all previous planetary missions.

Thompson, Thomas W.↗