Design and operating characteristics of a centralized on-line data processing system at Langley Research Center
Centralized on-line data processing system providing concurrent service for five test facilities
Kopelson, S.↗
SEARCH · Search NASA
Results for “System Process”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Launch Processing System for Space Shuttle.
In order to reduce costs and accelerate vehicle turnaround, a single automated system will be developed to support shuttle launch site operations, replacing a multiplicity of systems used in previous programs. The Launch Processing System will provide real-time control, data analysis, and information display for the checkout, servicing, launch, landing, and refurbishment of the launch vehicles, payloads, and all ground support systems. It will also provide real-time and historical data retrieval for management and sustaining engineering (test records and procedures, logistics, configuration control, scheduling, etc.).
Springer, D. A.↗
Power processing system for a 200 watt communication satellite transmitter
A power processing system (PPS) for a communication satellite, high power (200W RF) multi-stage depressed collector, 12 GHz, traveling wave tube, is described. The PPS converts spacecraft bus power at a nominal voltage of 76 Vdc to the levels necessary for operating a ten-collector coupled cavity TWT requiring approximately 500 watts of input power. Regulated voltages of up to -11.3K Vdc are provided along with command, protection and telemetry signal conditioning circuits. Power processor interface requirements are set forth and a block diagram illustrating the basic approach utilized is presented. Overall performance, design characteristics and unique features are discussed. Thermal and mechanical interface requirements impacting on PPS design are described as well as the thermal control technique utilized for the overall PPS/TWT assembly.
Farber, B. F.↗
Launch Processing System
This paper presents a functional description of the Launch Processing System, which provides automatic ground checkout and control of the Space Shuttle launch site and airborne systems, with emphasis placed on the Checkout, Control, and Monitor Subsystem. Hardware and software modular design concepts for the distributed computer system are reviewed relative to performing system tests, launch operations control, and status monitoring during ground operations. The communication network design, which uses a Common Data Buffer interface to all computers to allow computer-to-computer communication, is discussed in detail.
Byrne, F.↗
An error analysis of tropical cyclone divergence and vorticity fields derived from satellite cloud winds on the Atmospheric and Oceanographic Information Processing System (AOIPS)
An advanced Man-Interactive image and data processing system (AOIPS) was developed to extract basic meteorological parameters from satellite data and to perform further analyses. The errors in the satellite derived cloud wind fields for tropical cyclones are investigated. The propagation of these errors through the AOIPS system and their effects on the analysis of horizontal divergence and relative vorticity are evaluated.
Hasler, A. F.↗
Development of the Data Acquisition and Processing System for a Pulsed 2-Micron Coherent Doppler Lidar System
A general overview of the development of a data acquisition and processing system is presented for a pulsed, 2-micron coherent Doppler Lidar system located in NASA Langley Research Center in Hampton, Virginia, USA. It is a comprehensive system that performs high-speed data acquisition, analysis, and data display both in real time and offline. The first flight missions are scheduled for the summer of 2010 as part of the NASA Genesis and Rapid Intensification Processes (GRIP) campaign for the study of hurricanes. The system as well as the control software is reviewed and its requirements and unique features are discussed.
Beyon, Jeffrey Y.↗
Image Processing System
Mallinckrodt Institute of Radiology (MIR) is using a digital image processing system which employs NASA-developed technology. MIR's computer system is the largest radiology system in the world. It is used in diagnostic imaging. Blood vessels are injected with x-ray dye, and the images which are produced indicate whether arteries are hardened or blocked. A computer program developed by Jet Propulsion Laboratory known as Mini-VICAR/IBIS was supplied to MIR by COSMIC. The program provides the basis for developing the computer imaging routines for data processing, contrast enhancement and picture display.
Source record↗
The Trash Compaction Processing System (TCPS) Technology Demonstration and Risk Reduction Updates FY23-FY24
The Next STEP Phase BTrash Compaction Processing System (TCPS) is being developed for a technology demonstration on the International Space Station(ISS) to process common spacecraft consumables trash such as food packaging and clothing to reduce trash storage volume, recover water, safen(e.g. reduce biological activity), and shape the trash for storage, jettison, reuse (e.g.,radiation shielding) and/or recycling. Sierra Space is developing the flight demonstration hardware and National Aeronautics and Space Administration(NASA) continues to conduct risk reduction activities to exploreoperational scenarios, setting the stage for successful on-orbit tests. After the flight demonstration on ISS, the TCPS becomes available to be infused into NASA short-and long-term missions.This paper will discuss the rationale for the updated requirement definitions outlined in the 2023 International Conference on Environmental System TCPS paper and the ongoing risk reduction activities. In addition, drawing from lessons learned in the development of the TCPS, a discussion of other compression technologies will be introduced for various mission types.
Trash Compaction Processing System↗
A post-processing system for automated rectification and registration of spaceborne SAR imagery
An automated post-processing system has been developed that interfaces with the raw image output of the operational digital SAR correlator. This system is designed for optimal efficiency by using advanced signal processing hardware and an algorithm that requires no operator interaction, such as the determination of ground control points. The standard output is a geocoded image product (i.e. resampled to a specified map projection). The system is capable of producing multiframe mosaics for large-scale mapping by combining images in both the along-track direction and adjacent cross-track swaths from ascending and descending passes over the same target area. The output products have absolute location uncertainty of less than 50 m and relative distortion (scale factor and skew) of less than 0.1 per cent relative to local variations from the assumed geoid.
Curlander, John C.↗
Timing errors - their detection and correction in the imp information processing system
Timing errors - detection and correction in IMP-I INFORMATION processing system
ERROR CORRECTING DEVICE↗
A one-megapixel image acquisition and processing system for solar oscillation studies
The 1-Mpixel image acquisition and processing system that has been installed at the Mt. Wilson observatory as part of the development effort for the NASA/ESA Solar Oscillations Imager Experiment of the projected Heliospheric Observatory mission is discussed. The system encompasses a high speed CCD camera with a 1024 x 1024-pixel virtual phase chip array, yielding a readout rate of about 800,000 pixels/sec; this allows the entire Mpixel array to be read out in just over 1 sec. The camera is interfaced with a floating point array processor that integrates several successive exposures from the CCD camera and differences selected pairs of integrated images. The system is currently being used to record and difference narrowband images of the sun.
Rhodes, Edward J., Jr.↗
Implementation of a VLSI Level Zero Processing system utilizing the functional component approach
A high rate Level Zero Processing system is currently being prototyped at NASA/Goddard Space Flight Center (GSFC). Based on state-of-the-art VLSI technology and the functional component approach, the new system promises capabilities of handling multiple Virtual Channels and Applications with a combined data rate of up to 20 Megabits per second (Mbps) at low cost.
Shi, Jianfei↗
VLSI mixed signal processing system
An economical and efficient VLSI implementation of a mixed signal processing system (MSP) is presented in this paper. The MSP concept is investigated and the functional blocks of the proposed MSP are described. The requirements of each of the blocks are discussed in detail. A sample application using active acoustic cancellation technique is described to demonstrate the power of the MSP approach.
Alvarez, A.↗
In-situ materials processing systems and bioregenerative life support systems interrelationships
The synergy and linkages between bioregenerative life support systems and the materials produced by in-situ materials processing systems was investigated. Such systems produce a broad spectrum of byproducts such as oxygen, hydrogen, processed soil material, ceramics, refractory, and other materials. Some of these materials may be utilized by bioregenerative systems either directly or with minor modifications. The main focus of this project was to investigate how these materials can be utilized to assist a bioregenerative life support system. Clearly the need to provide a sustainable bioregenerative life support system for long term human habitation of space is significant.
Mignon, George V.↗
The Trash Compaction Processing System (TCPS) Technology Demonstration and Risk Reduction Updates FY23-FY24 Presentation
The Next STEP Phase BTrash Compaction Processing System (TCPS) is being developed for a technology demonstration on the International Space Station(ISS) to process common spacecraft consumables trash such as food packaging and clothing to reduce trash storage volume, recover water, safen(e.g. reduce biological activity), and shape the trash for storage, jettison, reuse (e.g.,radiation shielding) and/or recycling. Sierra Space is developing the flight demonstration hardware and National Aeronautics and Space Administration(NASA) continues to conduct risk reduction activities to exploreoperational scenarios, setting the stage for successful on-orbit tests. After the flight demonstration on ISS, the TCPS becomes available to be infused into NASA short-and long-term missions.This paper will discuss the rationale for the updated requirement definitions outlined in the 2023 International Conference on Environmental System TCPS paper and the ongoing risk reduction activities. In addition, drawing from lessons learned in the development of the TCPS, a discussion of other compression technologies will be introduced for various mission types.
Trash Compaction Processing System↗
On the hitchhiker Robot Operated Materials Processing System: Experiment data system
The Space Shuttle Discovery STS-64 mission carried the first American autonomous robot into space, the Robot Operated Materials Processing System (ROMPS). On this mission ROMPS was the only Hitchhiker experiment and had a unique opportunity to utilize all Hitchhiker space carrier capabilities. ROMPS conducted rapid thermal processing of the one hundred semiconductor material samples to study how micro gravity affects the resulting material properties. The experiment was designed, built and operated by a small GSFC team in cooperation with industry and university based principal investigators who provided the material samples and data interpretation. ROMPS' success presents some valuable lessons in such cooperation, as well as in the utilization of the Hitchhiker carrier for complex applications. The motivation of this paper is to share these lessons with the scientific community interested in attached payload experiments. ROMPS has a versatile and intelligent material processing control data system. This paper uses the ROMPS data system as the guiding thread to present the ROMPS mission experience. It presents an overview of the ROMPS experiment followed by considerations of the flight and ground data subsystems and their architecture, data products generation during mission operations, and post mission data utilization. It then presents the lessons learned from the development and operation of the ROMPS data system as well as those learned during post-flight data processing.
Kizhner, Semion↗
The Trash Compaction Processing System (TCPS) Technology Demonstrations Science Objectives and Requirement Definitions
Throughout the Next STEP Phase A and Phase B, the Trash Compaction Processing System (TCPS) is being developed for a technology demonstration (TD) on the International Space Station (ISS) in 2025. For Phase A, two contractors built proof-of-concept hardware. One contractor was chosen to build the TD hardware for Phase B. Both Phase A lessons learned and risk reduction activities at Ames Research Center (ARC) were used to write the TD science objectives, scope, and requirements. The work at ARC aims to retire technical risks and provide design data to TCPS developers and the ISS system integrators. This paper will summarize the lessons learned from the proof-of-concept hardware, the risk reduction activities, and how these lessons learned form the basis of the TD requirement matrix.
TCPS↗
Development and fabrication of a solar cell junction processing system
Development of a pulsed electron beam subsystem, wafer transport system, and ion implanter are discussed. A junction processing system integration and cost analysis are reviewed. Maintenance of the electron beam processor and the experimental test unit of the non-mass analyzed ion implanter is reviewed.
Banker, S.↗