Search NASA⌕ Search

SEARCH · Search NASA

Results for “THEORIES - ELASTICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1957

Correlation, evaluation, and extension of linearized theories for tire motion and wheel shimmy

An evaluation is made of the existing theories of a linearized tire motion and wheel shimmy. It is demonstrated that most of the previously published theories represent varying degrees of approximation to a summary theory developed in this report which is a minor modification of the basic theory of Von Schlippe and Dietrich. In most cases where strong differences exist between the previously published theories and summary theory, the previously published theories are shown to possess certain deficiencies. A series of systematic approximations to the summary theory is developed for the treatment of problems too simple to merit the use of the complete summary theory, and procedures are discussed for applying the summary theory and its systematic approximations to the shimmy of more complex landing-gear structures than have previously been considered. Comparisons of the existing experimental data with the predictions of the summary theory and the systematic approximations provide a fair substantiation of the more detailed approximate theories.

Smiley, Robert F↗
NASA NTRS2017

Nonlinear Large Deflection Theory with Modified Aeroelastic Lifting Line Aerodynamics for a High Aspect Ratio Flexible Wing

This paper investigates the effect of nonlinear large deflection bending on the aerodynamic performance of a high aspect ratio flexible wing. A set of nonlinear static aeroelastic equations are derived for the large bending deflection of a high aspect ratio wing structure. An analysis is conducted to compare the nonlinear bending theory with the linear bending theory. The results show that the nonlinear bending theory is length-preserving whereas the linear bending theory causes a non-physical effect of lengthening the wing structure under the no axial load condition. A modified lifting line theory is developed to compute the lift and drag coefficients of a wing structure undergoing a large bending deflection. The lift and drag coefficients are more accurately estimated by the nonlinear bending theory due to its length-preserving property. The nonlinear bending theory yields lower lift and span efficiency than the linear bending theory. A coupled aerodynamic-nonlinear finite element model is developed to implement the nonlinear bending theory for a Common Research Model (CRM) flexible wing wind tunnel model to be tested in the University of Washington Aeronautical Laboratory (UWAL). The structural stiffness of the model is designed to give about 10% wing tip deflection which is large enough that could cause the nonlinear deflection effect to become significant. The computational results show that the nonlinear bending theory yields slightly less lift than the linear bending theory for this wind tunnel model. As a result, the linear bending theory is deemed adequate for the CRM wind tunnel model.

Aeroelasticity↗
DOE OSTI2021

Entanglement in Gravity and Quantum Field Theory (Final Report)

It is becoming increasingly clear that ideas from quantum information theory, particularly the notion of quantum entanglement, play a fundamental role in some of the deepest aspects of our modern theories of quantum fields and gravity. The aim of this research was to explore the role that quantum entanglement plays in quantum field theories and in the nature of space-time and gravity. Building on a variety of earlier results obtained in these regards at the University of Illinois, we explored the constraints on the dynamical content of quantum field theories that follow from their entanglement properties. Topological field theories are important examples of particularly simple quantum field theories whose patterns of entanglement make connections between high energy physics, condensed matter physics and mathematics. These theories are directly relevant to low energy properties of certain materials. The study of such theories allowed us to investigate ideas that are relevant to quantum information research, such as new notions of entanglement between multiple parties and the quantum properties of interfaces between different phases of such materials. In addition, we employed new results in mathematics which strengthen monotonicity constraints on relative entropy to study their ramifications in quantum field theories, and we used quantum information methods to study the emergence of quantum gravity and string theory in holographic quantum field theories.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2001

Theory Interpretations in PVS

The purpose of this task was to provide a mechanism for theory interpretations in a prototype verification system (PVS) so that it is possible to demonstrate the consistency of a theory by exhibiting an interpretation that validates the axioms. The mechanization makes it possible to show that one collection of theories is correctly interpreted by another collection of theories under a user-specified interpretation for the uninterpreted types and constants. A theory instance is generated and imported, while the axiom instances are generated as proof obligations to ensure that the interpretation is valid. Interpretations can be used to show that an implementation is a correct refinement of a specification, that an axiomatically defined specification is consistent, or that a axiomatically defined specification captures its intended models. In addition, the theory parameter mechanism has been extended with a notion of theory as parameter so that a theory instance can be given as an actual parameter to an imported theory. Theory interpretations can thus be used to refine an abstract specification or to demonstrate the consistency of an axiomatic theory. In this report we describe the mechanism in detail. This extension is a part of PVS version 3.0, which will be publicly released in mid-2001.

Owre, Sam↗
NASA NTRS2003

Aging Theories for Establishing Safe Life Spans of Airborne Critical Structural Components

New aging theories have been developed to establish the safe life span of airborne critical structural components such as B-52B aircraft pylon hooks for carrying air-launch drop-test vehicles. The new aging theories use the equivalent-constant-amplitude loading spectrum to represent the actual random loading spectrum with the same damaging effect. The crack growth due to random loading cycling of the first flight is calculated using the half-cycle theory, and then extrapolated to all the crack growths of the subsequent flights. The predictions of the new aging theories (finite difference aging theory and closed-form aging theory) are compared with the classical flight-test life theory and the previously developed Ko first- and Ko second-order aging theories. The new aging theories predict the number of safe flights as considerably lower than that predicted by the classical aging theory, and slightly lower than those predicted by the Ko first- and Ko second-order aging theories due to the inclusion of all the higher order terms.

Ko, William L.↗
DOE OSTI2020

Core excitations with excited state mean field and perturbation theory

In this work, we test the efficacy of excited state mean field theory and its excited-state-specific perturbation theory on the prediction of K-edge positions and x-ray peak separations. We find that the mean field theory is surprisingly accurate, even though it contains no accounting of differential electron correlation effects. In the perturbation theory, we test multiple core-valence separation schemes and find that, with the mean field theory already so accurate, electron-counting biases in one popular separation scheme become a dominant error when predicting K-edges. Happily, these appear to be relatively easy to correct for, leading to a perturbation theory for K-edge positions that is lower scaling and more accurate than coupled cluster theory and competitive in accuracy with recent high-accuracy results from restricted open-shell Kohn-Sham theory. For peak separations, our preliminary data show excited state mean field theory to be exceptionally accurate, but more extensive testing will be needed to see how it and its perturbation theory compare to coupled cluster peak separations more broadly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1944

On the general theory of thin airfoils for nonuniform motion

General thin-airfoil theory for a compressible fluid is formulated as boundary problem for the velocity potential, without recourse to the theory of vortex motion. On the basis of this formulation the integral equation of lifting-surface theory for an incompressible fluid is derived with the chordwise component of the fluid velocity at the airfoil as the function to be determined. It is shown how by integration by parts this integral equation can be transformed into the Biot-Savart theorem. A clarification is gained regarding the use of principal value definitions for the integral which occur. The integral equation of lifting-surface theory is used a s the starting point for the establishment of a theory for the nonstationary airfoil which is a generalization of lifting-line theory for the stationary airfoil and which might be called "lifting-strip" theory. Explicit expressions are given for section lift and section moment in terms of the circulation function, which for any given wing deflection is to be determined from an integral equation which is of the type of the equation of lifting-line theory. The results obtained are for airfoils of uniform chord. They can be extended to tapered airfoils. One of the main uses of the results should be that they furnish a practical means for the analysis of the aerodynamic span effect in the problem of wing flutter. The range of applicability of "lifting-strip" theory is the same as that of lifting-line theory so that its results may be applied to airfoils with aspect ratios as low as three.

BIBLIOGRAPHY-WINGS↗
DOE OSTI2024

Wilsonian effective potentials and closed string field theory

We investigate Wilsonian effective field theory as a model for the construction of the tachyon potential and nonperturbative vacua in closed string field theory. In a number of cases we are able to find the effective potential exactly, and observe what appear to be universal features. We find that the effective field theory contains the same nonperturbative vacuum structure as the bare Lagrangian, though this information is encoded less efficiently as the distance scale of the effective field theory is increased. The implication is that closed string field theory plausibly contains information about the nonperturbative vacuum structure of string theory, in spite of its similarities to effective field theory. We also truncate the effective potential at a fixed power of the field and investigate how the global structure of the effective potential may be approximated via Padé resummation. Qualitative comparisons suggest that computation of the eighth to sixteenth order closed string vertex should be enough to obtain reliable results for the closed string field theory action evaluated on the tachyon field.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Higher-rank tensor field theory of non-abelian fracton and embeddon

We formulate a new class of tensor gauge field theories in any dimension that is a hybrid class between symmetric higher-rank tensor gauge theory (i.e., higher-spin gauge theory) and anti-symmetric tensor topological field theory. Our theory describes a mixed unitary phase interplaying between gapless and gapped topological order phases (which can live with or without Euclidean, Poincaré, or anisotropic symmetry, at least in ultraviolet high or intermediate energy field theory, but not yet to a lattice cutoff scale). The “gauge structure” can be compact, continuous, abelian or non-abelian. Our theory sits outside the paradigm of Maxwell electromagnetic theory in 1865 and Yang–Mills isospin/color theory in 1954. We discuss its local gauge transformation in terms of the ungauged vector-like or tensor-like higher-moment global symmetry. The non-abelian gauge structure is caused by gauging the non-commutative symmetries: a higher-moment symmetry and a charge conjugation (particle–hole) symmetry. Vector global symmetries along time direction may exhibit time crystals. We explore the relation of these long-range entangled matters to a non-abelian generalization of Fracton order in condensed matter, a field theory formulation of foliation, the spacetime embedding and Embeddon that we newly introduce, and possible fundamental physics applications to dark matter or dark energy.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Degenerate coupled-cluster theory

A size-extensive, converging, black-box, ab initio coupled-cluster (ΔCC) ansatz is introduced that computes the energies and wave functions of states from any degenerate or nondegenerate Slater-determinant references with any numbers of α- and β-spin electrons, any patterns of orbital occupancy, any spin multiplicities, and any spatial symmetries. For a nondegenerate reference, it reduces to the single-reference coupled-cluster ansatz. For a degenerate multireference, it is a natural coupled-cluster extension of degenerate Møller–Plesset perturbation (ΔMP) theory. For ionized and electron-attached references, it is a coupled-cluster Green’s function, although the present theory is convergent toward the full-configuration-interaction limits, while the Feynman–Dyson many-body Green’s function (MBGF) theory generally is not. Its single-excitation instance is a projection Hartree–Fock theory as per the Thouless theorem, which may be useful for core ionizations, high-spin states, and possibly electron affinities. Additionally, a new multireference coupled-cluster theory for a general model space is developed. This quasidegenerate coupled-cluster (QCC) theory is exactly converging, but not black-box, and intended for strong correlation. Determinant-based, general-order algorithms of ΔCC and QCC theories are implemented and compared with configuration-interaction (CI) and equation-of-motion coupled-cluster (EOM-CC) theories through octuple excitations and with ΔMP and MBGF theories up to the nineteenth order. An algebraic, optimal-scaling algorithm of the ΔCC theory is computer-synthesized at the levels of single excitations (ΔCCS) and of single and double excitations (ΔCCSD). As a result, the order of performance is QCC ≈ ΔCC > EOM-CC > CI at the same order or QCC ≈ ΔCC > ΔMP > MBGF at the same cost scaling.

Hirata, So [University of Illinois at Urbana-Champ↗
NASA NTRS1984

Boundary-layer linear stability theory

Most fluid flows are turbulent rather than laminar and the reason for this was studied. One of the earliest explanations was that laminar flow is unstable, and the linear instability theory was first developed to explore this possibility. A series of early papers by Rayleigh produced many notable results concerning the instability of inviscid flows, such as the discovery of inflectional instability. Viscosity was commonly thought to act only to stabilize the flow, and flows with convex velocity profiles appeared to be stable. The investigations that led to a viscous theory of boundary layer instability was reported. The earliest application of linear stability theory to transition prediction calculated the amplitude ratio of the most amplified frequency as a function of Reynolds number for a Blasius boundary layer, and found that this quantity had values between five and nine at the observed Ret. The experiment of Schubauer and Skramstad (1947) completely reversed the prevailing option and fully vindicated the Gottingen proponents of the theory. This experiment demonstrated the existence of instability waves in a boundary layer, their connection with transition, and the quantitative description of their behavior by the theory of Tollmien and Schlichting. It is generally accepted that flow parameters such as pressure gradient, suction and heat transfer qualitatively affect transition in the manner predicted by the linear theory, and in particular that a flow predicted to be stable by the theory should remain laminar. The linear theory, in the form of the e9, or N-factor is today in routine use in engineering studies of laminar flow. The stability theory to boundary layers with pressure gradients and suction was applied. The only large body of numerical results for exact boundary layer solutions before the advent of the computer age by calculating the stability characteristics of the Falkner-Skan family of velocity profiles are given. When the digital computer reached a stage of development which permit the direct solution of the primary differential equations, numerical results were obtained from the linear theory during the next 10 years for many different boundary layer flows: three dimensional boundary layers; free convention boundary layers; compressible boundary layers; boundary layers on compliant walls; a recomputation of Falkner-Skan flows; unsteady boundary layers; and heated wall boundary layers.

Leslie M Mack↗
NASA NTRS1987

A higher-order theory for geometrically nonlinear analysis of composite laminates

A third-order shear deformation theory of laminated composite plates and shells is developed, the Navier solutions are derived, and its finite element models are developed. The theory allows parabolic description of the transverse shear stresses, and therefore the shear correction factors of the usual shear deformation theory are not required in the present theory. The theory also accounts for the von Karman nonlinear strains. Closed-form solutions of the theory for rectangular cross-ply and angle-ply plates and cross-ply shells are developed. The finite element model is based on independent approximations of the displacements and bending moments (i.e., mixed finite element model), and therefore, only C sup o -approximation is required. The finite element model is used to analyze cross-ply and angle-ply laminated plates and shells for bending and natural vibration. Many of the numerical results presented here should serve as references for future investigations. Three major conclusions resulted from the research: First, for thick laminates, shear deformation theories predict deflections, stresses and vibration frequencies significantly different from those predicted by classical theories. Second, even for thin laminates, shear deformation effects are significant in dynamic and geometrically nonlinear analyses. Third, the present third-order theory is more accurate compared to the classical and firt-order theories in predicting static and dynamic response of laminated plates and shells made of high-modulus composite materials.

Reddy, J. N.↗
NASA NTRS2012

Analytic and Computational Perspectives of Multi-Scale Theory for Homogeneous, Laminated Composite, and Sandwich Beams and Plates

This paper reviews the theoretical foundation and computational mechanics aspects of the recently developed shear-deformation theory, called the Refined Zigzag Theory (RZT). The theory is based on a multi-scale formalism in which an equivalent single-layer plate theory is refined with a robust set of zigzag local layer displacements that are free of the usual deficiencies found in common plate theories with zigzag kinematics. In the RZT, first-order shear-deformation plate theory is used as the equivalent single-layer plate theory, which represents the overall response characteristics. Local piecewise-linear zigzag displacements are used to provide corrections to these overall response characteristics that are associated with the plate heterogeneity and the relative stiffnesses of the layers. The theory does not rely on shear correction factors and is equally accurate for homogeneous, laminated composite, and sandwich beams and plates. Regardless of the number of material layers, the theory maintains only seven kinematic unknowns that describe the membrane, bending, and transverse shear plate-deformation modes. Derived from the virtual work principle, RZT is well-suited for developing computationally efficient, C0-continuous finite elements; formulations of several RZT-based elements are highlighted. The theory and its finite elements provide a unified and reliable computational platform for the analysis and design of high-performance load-bearing aerospace structures.

Tessler, Alexander↗
NASA NTRS2012

Analytic and Computational Perspectives of Multi-Scale Theory for Homogeneous, Laminated Composite, and Sandwich Beams and Plates

This paper reviews the theoretical foundation and computational mechanics aspects of the recently developed shear-deformation theory, called the Refined Zigzag Theory (RZT). The theory is based on a multi-scale formalism in which an equivalent single-layer plate theory is refined with a robust set of zigzag local layer displacements that are free of the usual deficiencies found in common plate theories with zigzag kinematics. In the RZT, first-order shear-deformation plate theory is used as the equivalent single-layer plate theory, which represents the overall response characteristics. Local piecewise-linear zigzag displacements are used to provide corrections to these overall response characteristics that are associated with the plate heterogeneity and the relative stiffnesses of the layers. The theory does not rely on shear correction factors and is equally accurate for homogeneous, laminated composite, and sandwich beams and plates. Regardless of the number of material layers, the theory maintains only seven kinematic unknowns that describe the membrane, bending, and transverse shear plate-deformation modes. Derived from the virtual work principle, RZT is well-suited for developing computationally efficient, C(sup 0)-continuous finite elements; formulations of several RZT-based elements are highlighted. The theory and its finite element approximations thus provide a unified and reliable computational platform for the analysis and design of high-performance load-bearing aerospace structures.

Tessler, Alexander↗
DOE OSTI2020

Universality between vector-like and chiral quiver gauge theories: anomalies and domain walls

We study low-energy dynamics of [SU($\textit{N}$)]$^K$ chiral quiver gauge theories in connection with $\mathcal{N}$ = 1 super Yang-Mills (SYM) theory, and quantum chromodynamics with bi-fundamental fermions (QCD(BF)). These theories can be obtained by $\mathbb Z_K$ orbifold projections of $\mathcal{N}$ = 1 SU($\textit{N K}$) SYM theory, but the perturbative planar equivalence does not extend nonperturbatively for $\textit{K}$ ≥ 3. In order to study low-energy behaviors, we analyze these systems using ’t Hooft anomaly matching and reliable semiclassics on $\mathbb R^3 × S^1$. Thanks to ’t Hooft anomaly that involves 1-form center symmetry and discrete chiral symmetry, we predict that chiral symmetry must be spontaneously broken in the confinement phase, and there exist $\textit{N}$ vacua. Theories with even $\textit{K}$ possess a physical θ angle despite the presence of massless fermions, and we further predict the $\textit{N}$-branch structure associated with it; the number of vacua is enhanced to 2$\textit{N}$ at θ = π due to spontaneous $\textit{C P}$ breaking. Both of these predictions are explicitly confirmed by reliable semiclassics on $\mathbb R^3 × S^1$ with the double-trace deformation. Symmetry and anomaly of odd-$\textit{K}$ theories are the same as those of the $\mathcal{N}$ = 1 SYM, and the ones of even-$\textit{K}$ theories are same as those of QCD(BF). We unveil why there exists universality between vector-like and chiral quiver theories, and conjecture that their ground states can be continuously deformed without quantum phase transitions. We briefly discuss anomaly inflow on the domain walls connecting the vacua of the theory and possible anomaly matching scenarios.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Charge completeness and the massless charge lattice in F-theory models of supergravity

We prove that, for every 6D supergravity theory that has an F-theory description, the property of charge completeness for the connected component of the gauge group (meaning that all charges in the corresponding charge lattice are realized by massive or massless states in the theory) is equivalent to a standard assumption made in F-theory for how geometry encodes the global gauge theory by means of the Mordell-Weil group of the elliptic fibration. This result also holds in 4D F-theory constructions for the parts of the gauge group that come from sections and from 7-branes. We find that in many 6D F-theory models the full charge lattice of the theory is generated by massless charged states; this occurs for each gauge factor where the associated anomaly coefficient satisfies a simple positivity condition. We describe many of the cases where this massless charge sufficiency condition holds, as well as exceptions where the positivity condition fails, and analyze the related global structure of the gauge group and associated Mordell-Weil torsion in explicit F-theory models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Thermal modeling of directed energy deposition additive manufacturing using graph theory

Purpose: The purpose of this paper is to develop, apply and validate a mesh-free graph theory–based approach for rapid thermal modeling of the directed energy deposition (DED) additive manufacturing (AM) process. Design/methodology/approach: Here, the authors develop a novel mesh-free graph theory–based approach to predict the thermal history of the DED process. Subsequently, the authors validated the graph theory predicted temperature trends using experimental temperature data for DED of titanium alloy parts (Ti-6Al-4V). Temperature trends were tracked by embedding thermocouples in the substrate. The DED process was simulated using the graph theory approach, and the thermal history predictions were validated based on the data from the thermocouples. Findings: The temperature trends predicted by the graph theory approach have mean absolute percentage error of approximately 11% and root mean square error of 23°C when compared to the experimental data. Moreover, the graph theory simulation was obtained within 4 min using desktop computing resources, which is less than the build time of 25 min. By comparison, a finite element–based model required 136 min to converge to similar level of error. Research limitations/implications: This study uses data from fixed thermocouples when printing thin-wall DED parts. In the future, the authors will incorporate infrared thermal camera data from large parts. Practical implications: The DED process is particularly valuable for near-net shape manufacturing, repair and remanufacturing applications. However, DED parts are often afflicted with flaws, such as cracking and distortion. In DED, flaw formation is largely governed by the intensity and spatial distribution of heat in the part during the process, often referred to as the thermal history. Accordingly, fast and accurate thermal models to predict the thermal history are necessary to understand and preclude flaw formation. Originality/value: This paper presents a new mesh-free computational thermal modeling approach based on graph theory (network science) and applies it to DED. The approach eschews the tedious and computationally demanding meshing aspect of finite element modeling and allows rapid simulation of the thermal history in additive manufacturing. Although the graph theory has been applied to thermal modeling of laser powder bed fusion (LPBF), there are distinct phenomenological differences between DED and LPBF that necessitate substantial modifications to the graph theory approach.

42 ENGINEERING↗
DOE OSTI2024

Anomalies of 4d SpinG theories

Abstract We consider ’t Hooft anomalies of four-dimensional gauge theories whose fermion matter content admits Spin G (4) generalized spin structure, withGeither gauged or a global symmetry. We discuss methods to directly computew 2 ∪w 3 ’t Hooft anomalies involving Stiefel-Whitney classes of gauge and flavor symmetry bundles that such theories can have on non-spin manifolds, e.g.M 4 = ℂℙ 2 . Such anomalies have been discussed for SU(2) gauge theory with adjoint fermions, where they were shown to give an effect that was originally found in the Donaldson-Witten topological twist of$$ \mathcal{N} $$ N = 2 SYM theory. We directly compute these anomalies for a variety of theories, including generalGgauge theories with adjoint fermions, SU(2) gauge theory with fermions in general representations, and Spin(N) gauge theories with fundamental matter. We discuss aspects of matching these and other ’t Hooft anomalies in the IR phase where global symmetries are spontaneously broken, in particular for generalG gauge theory withN f adjoint Weyl fermions. For example, in the case ofN f = 2 we discuss anomaly matching in the IR phase consisting of$$ {h}_{G_{\textrm{gauge}}}^{\vee } $$ h G gauge ∨ copies of a ℂℙ 1 non-linear sigma model, including for thew 2 w 3 anomalies when formulated with$$ {\textrm{Spin}}_{\textrm{SU}{(2)}_{\textrm{global}}}(4) $$ Spin SU 2 global 4 structure.

Physics↗