Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMODYNAMIC ACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Two-dimensional stability of laminar flames

The stability of laminar flames was studied numerically and the dependence of stability on finite rate chemistry with low activation energy and variable thermodynamic and transport properties was addressed. The calculations show that activation energy and details of chemistry play a minor role in altering the linear neutral stability results from asymptotic analysis. Variable specific heat makes a marginal change to the stability; variable transport properties, on the other hand, tend to substantially enhance the stability from a critical wave number of about 0.50 to 0.20. Also, the effects of variable properties tend to nullify the effects of nonunity Lewis number. When the Lewis number of a single species is different from unity, as is true in a hydrogen-air premixed flame, the stability results remain close to that of unity Lewis number.

Mukunda, H. S.↗

Mutagenesis of tGCN5 core region reveals two critical surface residues F90 and R140

Research highlights: {yields} Mutagenesis of the tGCN5 core region reveals two residues important for function. {yields} Developed a fluorescent lysate-based activity assay to assess mutants. {yields} Surface-exposed residues F90 and R140 of tGCN5 are critical for H3 acetylation. -- Abstract: Tetrahymena General Control Non-Derepressor 5 (tGCN5) is a critical regulator of gene transcription via acetylation of histones. Since the acetylation ability has been attributed to the 'core region', we perform mutagenesis of residues within the tGCN5 'core region' in order to identify those critical for function and stability. Residues that do not participate in catalysis are identified, mutated and characterized for activity, structure and thermodynamic stability. Variants I107V, Q114L, A121T and A130S maintain the acetylation function relative to wild-type tGCN5, while variants F90Y, F112R and R140H completely abolish function. Of the three non-functional variants, since F112 is mutated into a non-homologous charged residue, a loss in function is expected. However, the remaining two variants are mutated into homologous residues, suggesting that F90 and R140 are critical for the activity of tGCN5. While mutation to homologous residue maintains acetylation of histone H3 for the majority of the variants, the two surface-exposed residues, F90 and R140, appear to be essential for tGCN5 function, structure or stability.

60 APPLIED LIFE SCIENCES↗

Thermodynamics and kinetic behaviors of thickness-dependent crystallization in high-k thin films deposited by atomic layer deposition

Atomic layer deposition is adopted to prepare HfO{sub 2} and Al{sub 2}O{sub 3} high-k thin films. The HfO{sub 2} thin films are amorphous at the initial growth stage, but become crystallized when the film thickness (h) exceeds a critical value (h{sub critical}{sup *}). This phase transition from amorphous to crystalline is enhanced at higher temperatures and is discussed, taking into account the effect of kinetic energy. At lower temperatures, the amorphous state can be maintained even when h>h{sub critical}{sup *} owing to the small number of activated atoms. However, the number of activated atoms increases with the temperature, allowing crystallization to occur even in films with smaller thickness. The Al{sub 2}O{sub 3} thin films, on the other hand, maintain their amorphous state independent of the film thickness and temperature owing to the limited number of activated atoms. A thermodynamic model is proposed to describe the thickness-dependent phase transition.

36 MATERIALS SCIENCE↗

THERMODYNAMIC SPECTRUM OF SOLAR FLARES BASED ON SDO/EVE OBSERVATIONS: TECHNIQUES AND FIRST RESULTS

The Solar Dynamics Observatory (SDO)/EUV Variability Experiment (EVE) provides rich information on the thermodynamic processes of solar activities, particularly on solar flares. Here, we develop a method to construct thermodynamic spectrum (TDS) charts based on the EVE spectral lines. This tool could potentially be useful for extreme ultraviolet (EUV) astronomy to learn about the eruptive activities on distant astronomical objects. Through several cases, we illustrate what we can learn from the TDS charts. Furthermore, we apply the TDS method to 74 flares equal to or greater than the M5.0 class, and reach the following statistical results. First, EUV peaks are always behind the soft X-ray (SXR) peaks and stronger flares tend to have faster cooling rates. There is a power-law correlation between the peak delay times and the cooling rates, suggesting a coherent cooling process of flares from SXR to EUV emissions. Second, there are two distinct temperature drift patterns, called Type I and Type II. For Type I flares, the enhanced emission drifts from high to low temperature like a quadrilateral, whereas for Type II flares the drift pattern looks like a triangle. Statistical analysis suggests that Type II flares are more impulsive than Type I flares. Third, for late-phase flares, the peak intensity ratio of the late phase to the main phase is roughly correlated with the flare class, and the flares with a strong late phase are all confined. We believe that the re-deposition of the energy carried by a flux rope, which unsuccessfully erupts out, into thermal emissions is responsible for the strong late phase found in a confined flare. Furthermore, we show the signatures of the flare thermodynamic process in the chromosphere and transition region in the TDS charts. These results provide new clues to advance our understanding of the thermodynamic processes of solar flares and associated solar eruptions, e.g., coronal mass ejections.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermodynamic Spectrum of Solar Flares Based on SDO/EVE Observations: Techniques and First Results

The Solar Dynamics Observatory (SDO)/EUV Variability Experiment (EVE) provides rich information on the thermodynamic processes of solar activities, particularly on solar flares. Here, we develop a method to construct thermodynamic spectrum (TDS) charts based on the EVE spectral lines. This tool could potentially be useful for extreme ultraviolet (EUV) astronomy to learn about the eruptive activities on distant astronomical objects. Through several cases, we illustrate what we can learn from the TDS charts. Furthermore, we apply the TDS method to 74 flares equal to or greater than the M5.0 class, and reach the following statistical results. First, EUV peaks are always behind the soft X-ray (SXR) peaks and stronger flares tend to have faster cooling rates. There is a power-law correlation between the peak delay times and the cooling rates, suggesting a coherent cooling process of flares from SXR to EUV emissions. Second, there are two distinct temperature drift patterns, called Type I and Type II. For Type I flares, the enhanced emission drifts from high to low temperature like a quadrilateral, whereas for Type II flares the drift pattern looks like a triangle. Statistical analysis suggests that Type II flares are more impulsive than Type I flares. Third, for late-phase flares, the peak intensity ratio of the late phase to the main phase is roughly correlated with the flare class, and the flares with a strong late phase are all confined. We believe that the re-deposition of the energy carried by a flux rope, which unsuccessfully erupts out, into thermal emissions is responsible for the strong late phase found in a confined flare. Furthermore, we show the signatures of the flare thermodynamic process in the chromosphere and transition region in the TDS charts. These results provide new clues to advance our understanding of the thermodynamic processes of solar flares and associated solar eruptions, e.g., coronal mass ejections.

Wang, Yuming↗

Inhibition of AmpC beta-lactamase through a destabilizing interaction in the active site

{beta}-Lactamases hydrolyze {beta}-lactam antibiotics, including penicillins and cephalosporins; these enzymes are the most widespread resistance mechanism to these drugs and pose a growing threat to public health. {beta}-Lactams that contain a bulky 6(7){alpha} substituent, such as imipenem and moxalactam, actually inhibit serine {beta}-lactamases and are widely used for this reason. Although mutant serine {beta}-lactamases have arisen that hydrolyze {beta}-lactamase resistant {beta}-lactams (e.g., ceftazidime) or avoid mechanism-based inhibitors (e.g., clavulanate), mutant serine {beta}-lactamases have not yet arisen in the clinic with imipenemase or moxalactamase activity. Structural and thermodynamic studies suggest that the 6(7){alpha} substituents of these inhibitors form destabilizing contacts within the covalent adduct with the conserved Asn152 in class C {beta}-lactamases (Asn132 in class A {beta}-lactamases). This unfavorable interaction may be crucial to inhibition. To test this destabilization hypothesis, we replaced Asn152 with Ala in the class C {beta}-lactamase AmpC from Escherichia coli and examined the mutant enzyme's thermodynamic stability in complex with imipenem and moxalactam. Consistent with the hypothesis, the Asn152 {yields} Ala substitution relieved 0.44 and 1.10 kcal/mol of strain introduced by imipenem and moxalactam, respectively, relative to the wild-type complexes. However, the kinetic efficiency of AmpC N152A was reduced by 6300-fold relative to that of the wild-type enzyme. To further investigate the inhibitor's interaction with the mutant enzyme, the X-ray crystal structure of moxalactam in complex with N152A was determined to a resolution of 1.83 {angstrom}. Moxalactam in the mutant complex is significantly displaced from its orientation in the wild-type complex; however, moxalactam does not adopt an orientation that would restore competence for hydrolysis. Although Asn152 forces {beta}-lactams with 6(7){alpha} substituents out of a catalytically competent configuration, making them inhibitors, the residue is essential for orienting {beta}-lactam substrates and cannot simply be replaced with a much smaller residue to restore catalytic activity. Designing {beta}-lactam inhibitors that interact unfavorably with this conserved residue when in the covalent adduct merits further investigation.

36 MATERIALS SCIENCE↗

REMOVING COOL CORES AND CENTRAL METALLICITY PEAKS IN GALAXY CLUSTERS WITH POWERFUL ACTIVE GALACTIC NUCLEUS OUTBURSTS

Recent X-ray observations of galaxy clusters suggest that cluster populations are bimodally distributed according to central gas entropy and are separated into two distinct classes: cool core (CC) and non-cool core (NCC) clusters. While it is widely accepted that active galactic nucleus (AGN) feedback plays a key role in offsetting radiative losses and maintaining many clusters in the CC state, the origin of NCC clusters is much less clear. At the same time, a handful of extremely powerful AGN outbursts have recently been detected in clusters, with a total energy {approx}10{sup 61}-10{sup 62} erg. Using two-dimensional hydrodynamic simulations, we show that if a large fraction of this energy is deposited near the centers of CC clusters, which is likely common due to dense cores, these AGN outbursts can completely remove CCs, transforming them to NCC clusters. Our model also has interesting implications for cluster abundance profiles, which usually show a central peak in CC systems. Our calculations indicate that during the CC to NCC transformation, AGN outbursts efficiently mix metals in cluster central regions and may even remove central abundance peaks if they are not broad enough. For CC clusters with broad central abundance peaks, AGN outbursts decrease peak abundances, but cannot effectively destroy the peaks. Our model may simultaneously explain the contradictory (possibly bimodal) results of abundance profiles in NCC clusters, some of which are nearly flat, while others have strong central peaks similar to those in CC clusters. A statistical analysis of the sizes of central abundance peaks and their redshift evolution may shed interesting insights on the origin of both types of NCC clusters and the evolution history of thermodynamics and AGN activity in clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Electronic and Vibrational Contributions to the Bulk Stabilities of Trivalent 3d Transition Metal Oxyhydroxides from Electronic Structure Calculations

Any understanding of the thermodynamic driving forces active in the global cycles of earth abundant metals requires attendant knowledge of the bulk mineral free energies. This can be particularly challenging for metal (oxyhydr)oxide phases which at low temperature aqueous conditions can be produced at a variety of hydration states and particle sizes. Here we present high quality density functional theory calculations of the relative bulk stabilities of a geologically important family of polymorphic trivalent metal oxyhydroxide crystal structures MOOH (M=Cr, Al, Fe). To improve understanding of their relative stabilities we permute the metal cations into the various possible canonical structure types including goethite (isostructural to diaspore and bracewillite), lepidocrocite (isosctructural to boehmite), guyaniite, and grimaldiite. Electronic, vibrational, and magnetic contributions are considered on a consistent theoretical footing using hybrid functionals and converged plane-wave bases. We find the considered bulk structures to be thermodynamically degenerate within the precision of the available theory, despite the fact that the vibrational and magnetic contributions vary substantially among the cations. A significant conclusion is that Cr3+ supports strong hydrogen bonds, low O-H stretching frequencies and facile H movement relative to the other cations.

Prange, Micah P.↗

Portlandite solubility and Ca2+ activity in presence of gluconate and hexitols

The current paper investigates the impact of gluconate, D-sorbitol, d-mannitol and D-galactitol on calcium speciation at high pH values by i) solubility measurements of portlandite (Ca(OH){sub 2}) and ii) potentiometric titration measurements of calcium salt solutions. Thermodynamic modelling was used to fit the chemical activities of Ca{sup 2+} and OH{sup −} ions and thus to determine the strength and kind of the different Ca-organic-hydroxide complexes. The strength of complex formation with Ca{sup 2+} decreases in the order gluconate ≫ sorbitol > mannitol > galactitol, which follows the same order as sorption on portlandite. Heteropolynuclear gluconate complexes with calcium and hydroxide dominate the Ca-speciation in the presence of portlandite, while for sorbitol ternary CaSorbOH{sup +} complexes were dominant under alkaline conditions. We expect that these results will help in better understanding the influence of gluconate and hexitols on the hydration of alite and Portland cement.

36 MATERIALS SCIENCE↗

1-D NiO nanorods pillared 2-D MnO 2 nanosheets as lithium-free cathode materials for charged-state lithium batteries

Theoretically monolayer MnO 2 sheets have an impressive high capacity of 616 mAh/g, but practically monolayer MnO 2 sheets have poor performances due partially to monolayer restacking. In this paper, we report the preparation of three-dimensional porous NiO nanorod pillared δ-MnO 2 nanosheets as integrated nanoarchitectures as lithium-free cathode materials. The as-synthesized NiO pillared δ-MnO 2 nanosheets have resulted in a moderately high specific capacity of 185 mA h g –1 , with more than 63% capacity retention after 200 cycles. In comparison, 2D MnO 2 nanosheets without NiO pillared structures only achieved a low initial capacity of 137 mA h g –1 , with just 17% capacity retention after 200 cycles. The dramatically improved electrochemical performances could be attributed to high surface areas with excellent porosity which provides more electrochemically active sites and thermodynamically favorable insertion pathways for the lithium ions. Furthermore, our results reveal that insertion of pillars is a promising strategy to explore in order to mitigate the restacking issues and achieve electrochemical performances close to theoretical values for monolayer MnO 2 .

25 ENERGY STORAGE↗

Geochemical-hydromechanical couplings during water-serpentinized harzburgite interactions at 20° C and 30 bars

Interaction of groundwater with the serpentinized harzburgites of the upper mantle plays an important role in the geologic carbon cycle and serpentinization processes. Here, in this study, an intact serpentinized harzburgite with more than 60% lizardite from the Semail ophiolite in Oman was reacted with water at near neutral pH and low PCO 2 to observe its dissolution behavior and reaction path within the CaO-MgO-SiO 2 -CO 2 -H 2 O system at 20 °C and 30 bars. In the experiment, mass (i.e. H 2 O, ions) transfer is by diffusion and the selected temperature and pressure conditions mimic water-rock interactions at the shallow portions of most ultramafic rock hosted aquifers. Equilibrium activity-activity diagrams and thermodynamic data were used to compare the experimentally determined reaction path with the theoretical stability boundaries for minerals involved to investigate the evolution of bulk chemical composition, mineralogy, and water composition. The experiments demonstrated that (i) the water-rock interactions increased the pH of the aqueous phase from 5.9 to 7.5 over a period of 18 weeks; (ii) the dissolution of lizardite, orthopyroxene (enstatite), and clinopyroxene (diopside and augite) increased the concentration of Mg, Ca, and Si in the aqueous phase; (iii) the dissolution was incongruent with respect to Mg and Si, favoring Si release at pH > 6 due to (a) breaking of more reactive cation‑oxygen bonds that is consistent with the stoichiometry of magnesium for proton exchange reaction which favors a surface that is enriched in Mg at basic conditions, and (b) preferential dissolution of clinopyroxene Mg 1.30 Ca 0.52 Fe 0.06 Si 2 O 6 ; (iv) the aqueous phase was undersaturated with respect to carbonate (e.g. calcite, magnesite, and hydromagnesite) and hydrous (e.g. lizardite, chrysotile, brucite, and talc) minerals; (v) the bulk chemical composition and mineralogy of the intact serpentinized harzburgite matrix did not change; (vi) the thermodynamic data can successfully predict water-intact serpentinized harzburgite behavior if the water chemical composition can be constrained; and (vii) no detectable macroscopic form of damage (e.g. microcracks forming as a result of differential stress fields due to changes in volume during chemical reaction) was observed.

Carbonation↗

NCAR Release of CAM‐SE in CESM2.0: A Reformulation of the Spectral Element Dynamical Core in Dry‐Mass Vertical Coordinates With Comprehensive Treatment of Condensates and Energy

Abstract It is the purpose of this paper to provide a comprehensive documentation of the new NCAR (National Center for Atmospheric Research) version of the spectral element (SE) dynamical core as part of the Community Earth System Model (CESM2.0) release. This version differs from previous releases of the SE dynamical core in several ways. Most notably the hybrid sigma vertical coordinate is based on dry air mass, the condensates are dynamically active in the thermodynamic and momentum equations (also referred to as condensate loading), and the continuous equations of motion conserve a more comprehensive total energy that includes condensates. Not related to the vertical coordinate change, the hyperviscosity operators and the vertical remapping algorithms have been modified. The code base has been significantly reduced, sped up, and cleaned up as part of integrating SE as a dynamical core in the CAM (Community Atmosphere Model) repository rather than importing the SE dynamical core from High‐Order Methods Modeling environment as an external code.

54 ENVIRONMENTAL SCIENCES↗

Theoretical study of CO2 capture mechanisms of SrO and Sr(OH)2.nH2O (n=0,1,8)

<span style="font-family: Roboto; font-size: 11pt;">In this presentation, the adsorption reactions of CO</span><sub style="font-family: Roboto; font-size: 11pt;">2</sub><span style="font-family: Roboto; font-size: 11pt;"> on SrO surfaces and its hydrated counterparts are examined. The predicted energies of CO</span><sub style="font-family: Roboto; font-size: 11pt;">2</sub><span style="font-family: Roboto; font-size: 11pt;"> adsorption on follows the order of increasing H</span><sub style="font-family: Roboto; font-size: 11pt;">2</sub><span style="font-family: Roboto; font-size: 11pt;">O content. The carbonation on the monohydrate surface is barrierless, whereas the CO</span><sub style="font-family: Roboto; font-size: 11pt;">2</sub><span style="font-family: Roboto; font-size: 11pt;"> reaction on the Sr(OH)</span><sub style="font-family: Roboto; font-size: 11pt;">2</sub><span style="font-family: Roboto; font-size: 11pt;"> and the octahydrate surfaces follows pathways with finite activation barriers. The thermodynamics of bulk reaction is also addressed.</span>

computational science and engineering↗

Clustered or regular cumulus cloud fields - The statistical character of observed and simulated cloud fields

The spatial distribution of cumulus clouds is assumed to be the result of the effects of convective activity on the thermodynamic environment. The effects can be parameterized in terms of a stabilization function representing the time rate of change of convective available potential energy. Using these results, a new inhibition hypothesis explaining the expected characteristics of the spatial distribution of cumulus clouds is postulated. This paper performs a verification of the inhibition hypothesis on real and simulated cloud fields. In order to do so, an objective measure of the spatial characteristics of cumulus clouds is introduced. Multiple cloud experiments are performed with a three-dimensional numerical cloud model. Skylab pictures of real cumuli are also used in the verification. Results of applying this measure to simulated and observed cumulus cloud fields confirm the inhibition hypothesis.

Ramirez, Jorge A.↗

Solar Thermal Upper Stage Cryogen System Engineering Checkout Test

The Solar Thermal Upper Stage technology (STUSTD) program is a solar thermal propulsion technology program cooperatively sponsored by a Boeing led team and by NASA MSFC. A key element of its technology program is development of a liquid hydrogen (LH2) storage and supply system which employs multi-layer insulation, liquid acquisition devices, active and passive thermodynamic vent systems, and variable 40W tank heaters to reliably provide near constant pressure H2 to a solar thermal engine in the low-gravity of space operation. The LH2 storage and supply system is designed to operate as a passive, pressure fed supply system at a constant pressure of about 45 psia. During operation of the solar thermal engine over a small portion of the orbit the LH2 storage and supply system propulsively vents through the enjoy at a controlled flowrate. During the long coast portion of the orbit, the LH2 tank is locked up (unvented). Thus, all of the vented H2 flow is used in the engine for thrust and none is wastefully vented overboard. The key to managing the tank pressure and therefore the H2 flow to the engine is to manage and balance the energy flow into the LH2 tank with the MLI and tank heaters with the energy flow out of the LH2 tank through the vented H2 flow. A moderate scale (71 cu ft) LH2 storage and supply system was installed and insulated at the NASA MSFC Test Area 300. The operation of the system is described in this paper. The test program for the LH2 system consisted of two parts: 1) a series of engineering tests to characterize the performance of the various components in the system: and 2) a 30-day simulation of a complete LEO and GEO transfer mission. This paper describes the results of the engineering tests, and correlates these results with analytical models used to design future advanced Solar Orbit Transfer Vehicles.

Olsen, A. D↗

FIRST-PRINCIPLES CALCULATIONS OF INTRINSIC DEFECTS AND Mg TRANSMUTANTS IN 3C-SiC

Silicon carbide (SiC) possesses many desirable attributes for applications in high-temperature and neutron radiation environments. These attributes include excellent dimensional and thermodynamic stability, low activation, high strength, and high thermal conductivity. Therefore, SiC based materials draw broad attention as structural materials for the first wall (FW) and blanket in fusion power plants. Under the severe high-energy neutron environment of D-T fusion systems, SiC suffers significant transmutation resulting in both gaseous and metallic transmutants. Recent calculations by Sawan, et al. [2] predict that at a fast neutron dose of ~100 dpa, there will be about 0.5 at% Mg generated in SiC through nuclear transmutation. Other transmutation products, including 0.15 at% Al, 0.2 at% Be and 2.2 at% He, also emerge. Formation and migration energies of point defects in 3C-SiC have been widely investigated using density functional theory (DFT). However, the properties of defects associated with transmutants are currently not well understood. Fundamental understanding of where the transmutation products go and how they affect microstructure evolution of SiC composites will help to predict property evolution and performance of SiC-based materials in fusion reactors.

Environmental Molecular Sciences Laboratory↗

Deciphering when Metal Corrosion is Spontaneous in Molten Fluorides Using Potential-Activity Diagrams

The work identifies the conditions for thermodynamically favored spontaneous metal corrosion using potential-activity diagrams tailored for high-temperature molten fluorides. These diagrams provide insights into the thermodynamic phase stability of both solid and dissolved metal species, such as Cr, Cr(II), Cr(III), Ni, Ni(II), Fe, and Fe(II), along with their potential primary oxidizers, including Eu(III), O2, and HF, over a broad range of theoretical F− anion activities. The work further examines the practical implications, prospects, and challenges associated with the construction of these diagrams. The key objective of this project is to pinpoint crucial thermodynamic variables that substantially affect metal corrosion electrochemistry in the context of molten salt nuclear reactor applications.

Materials Science↗

Development of Kinetic Model for Reactions Between Cu-Containing Multicomponent Slag and Liquid Sulfide Using Coupled Reaction Model

Copper smelting slag contains less than 2 mass pct of Cu oxide and 30–50 mass pct of Fe{sub x}O. Each year, the grade of copper ore decreases, while the amount of slag generated in the copper smelting process increases. In this study, a coupled reaction model to simulate the reaction between multicomponent slag and FeS-based matte was developed using reported thermodynamic data and double-film theory for the recycling of copper smelting slag. The activity coefficients of oxides in the multicomponent slag were calculated using a regular solution. The activity coefficients of Cu{sub 2}O in the slag and those of FeS, Cu{sub 2}S, and CaS in the FeS-based matte used previously reported data. The behaviors of Cu in slag and matte were confirmed by comparing the simulated results and the reported solubility of Cu in the slag in the temperatures ranging from 1473 K to 1573 K. In addition, the effect of the input amount of FeS on the copper content of the slag was verified by comparing the results of reaction model to experimental results. Using the reaction model, the influences of the initial ratio of FeO/SiO{sub 2} of the slag, temperature, and matte composition on the behaviors of Cu in the slag and matte were investigated.

36 MATERIALS SCIENCE↗