Search NASA⌕ Search

SEARCH · Search NASA

Results for “TRANSITION ELEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Computations of Disturbance Amplification Behind Isolated Roughness Elements and Comparison with Measurements

Computations are performed to study laminar-turbulent transition due to isolated roughness elements in boundary layers at Mach 3.5 and 5.95, with an emphasis on flow configurations for which experimental measurements from low disturbance wind tunnels are available. The Mach 3.5 case corresponds to a roughness element with right-triangle planform with hypotenuse that is inclined at 45 degrees with respect to the oncoming stream, presenting an obstacle with spanwise asymmetry. The Mach 5.95 case corresponds to a circular roughness element along the nozzle wall of the Purdue BAMQT wind tunnel facility. In both cases, the mean flow distortion due to the roughness element is characterized by long-lived streamwise streaks in the roughness wake, which can support instability modes that did not exist in the absence of the roughness element. The linear amplification characteristics of the wake flow are examined towards the eventual goal of developing linear growth correlations for the onset of transition.

Choudhari, Meelan↗
NASA NTRS2012

The Transition-Edge-Sensor Array for the Micro-X Sounding Rocket

The Micro-X sounding rocket program will fly a 128-element array of transition-edge-sensor microcalorimeters to enable high-resolution X-ray imaging spectroscopy of the Puppis-A supernova remnant. To match the angular resolution of the optics while maximizing the field-of-view and retaining a high energy resolution (< 4 eV at 1 keV), we have designed the pixels using 600 x 600 sq. micron Au/Bi absorbers, which overhang 140 x 140 sq. micron Mo/Au sensors. The data-rate capabilities of the rocket telemetry system require the pulse decay to be approximately 2 ms to allow a significant portion of the data to be telemetered during flight. Here we report experimental results from the flight array, including measurements of energy resolution, uniformity, and absorber thermalization. In addition, we present studies of test devices that have a variety of absorber contact geometries, as well as a variety of membrane-perforation schemes designed to slow the pulse decay time to match the telemetry requirements. Finally, we describe the reduction in pixel-to-pixel crosstalk afforded by an angle-evaporated Cu backside heatsinking layer, which provides Cu coverage on the four sidewalls of the silicon wells beneath each pixel.

Eckart, M. E.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-13027-DND

Outline - Motivation - Transition control using discrete roughness elements (DRE) - Subsonic Aircraft Roughness Glove Experiment (SARGE) - Crossflow transition in the absence of control - Effect of control - Concluding Remarks

Mujeeb Malik↗
NASA NTRS1997

Isolated Roughness Induced Boundary-Layer Transition: Shuttle Orbiter Ground Tests and Flight Experience

Recent Orbiter wind tunnel data and flight data have been used to evaluate boundary-layer transition induced by discrete-roughness elements on the Orbiter windward surface. Orbiter flow field calculations have been used to compute transition parameters and disturbance parameters for correlating the results and comparing the trends. Existing transition correlations have been modified and applied to the Orbiter. These correlations provide a means to predict transition on the Orbiter given a known isolated roughness element. Furthermore, these data and data reduction methods provide information and guidance for the prediction of transition due to &screte-roughness elements on future winged reentry vehicles.

Bouslog, Stanley A.↗
NASA NTRSDate not supplied

MEDLI2: MISP Inferred Aerothermal Environment and Flow Transition Assessment

The Mars Entry, Descent, and Landing Instrumentation 2 (MEDLI2) sensor suite on the Mars2020 mission contained multiple sensors on the aeroshell to measure the aerothermal environment during entry into the Martian atmosphere. These sensors performed superbly and successfully returned forebody and aftbody heating measurements. Analysis of MEDLI2 data indicated flow transitioning from a laminar to turbulent state on the heatshield. No evidence of flow transition was observed on the backshell. Two methods were used to estimate flow transition times on the heatshield: (1) temperature gradient of near-surface thermocouple data and (2) heat flux gradient from an inverse reconstruction approach using thermocouple data and material response modeling. Both methods produced similar transition times with an estimated accuracy of ±1 s. To assess various transition criteria, transition parameters were evaluated at each sensor location using flow field solutions from computational fluid dynamics (CFD) simulations. The idea was to use conservative values inferred from MEDLI2 data as transition criteria for other Mars missions. To test this hypothesis, MEDLI data from the Mars Science Laboratory (MSL) mission was used to compare predicted vs. actual flow transition times. The comparisons suggest smooth wall transition criteria are not well-suited in modeling the rapid progression of a turbulent transition front. Transition criteria containing a roughness element parameter agreed better with the flight data. In summary, critical transition values derived from MEDLI2 data may be used as a starting point in constructing a flow transition model for future Mars missions.

Chun Y Tang↗
NASA NTRS1975

Discrete component bonding and thick film materials study

The results are summarized of an investigation of discrete component bonding reliability and a fundamental study of new thick film resistor materials. The component bonding study examined several types of solder bonded components with some processing variable studies to determine their influence upon bonding reliability. The bonding reliability was assessed using the thermal cycle: 15 minutes at room temperature, 15 minutes at +125 C 15 minutes at room temperature, and 15 minutes at -55 C. The thick film resistor materials examined were of the transition metal oxide-phosphate glass family with several elemental metal additions of the same transition metal. These studies were conducted by preparing a paste of the subject composition, printing, drying, and firing using both air and reducing atmospheres. The resulting resistors were examined for adherence, resistance, thermal coefficient of resistance, and voltage coefficient of resistance.

Kinser, D. L.↗
NASA NTRS1996

Conversion of Osculating Orbital Elements to Mean Orbital Elements

Orbit determination and ephemeris generation or prediction over relatively long elapsed times can be accomplished with mean elements. The most simple and efficient method for orbit determination, which is also known as epoch point conversion, performs the conversion of osculating elements to mean elements by iterative procedures. Previous epoch point conversion methods are restricted to shorter elapsed times with linear convergence. The new method presented in this paper calculates an analytic initial guess of the unknown mean elements from a first order theory of secular perturbations and computes a transition matrix with accurate numerical partials. It thereby eliminates the problem of an inaccurate initial guess and an identity transition matrix employed by previous methods. With a good initial guess of the unknown mean elements and an accurate transition matrix, converging osculating elements to mean elements can be accomplished over long elapsed times with quadratic convergence.

Der, Gim J.↗
NASA NTRS1980

A solution of the variational equations for elliptic orbits in rotating coordinates

For elliptic reference orbits, formulas are given for the perturbation state transition matrix of the two-body problem. The formulas relate perturbations expressed in a local vertical rotating coordinate system and are valid for motion in the linear neighborhood of reference orbits with e in the range of 0 to 1. The elements of the state transition matrix are expressed in terms of natural parameters (horizontal and radial velocity, radius, eccentricity, true anomaly, etc.) at the initial and final points. In addition to the general form, a simplified version, valid for small eccentricity orbits, is given.

Jones, J. B.↗
NASA NTRS1993

Two-directional skin friction measurement utilizing a compact internally mounted thin-liquid-film skin friction meter

A new, compact oil film skin friction meter capable of measuring skin friction in two directions has been designed and constructed. The instrument allows the thin liquid film technique to now be applied in flight and in a wider variety of laboratory conditions. The instrument was tested by comparing measurements with those given by a floating element gage in laminar, transitional, and turbulent boundary layers with zero pressure gradient. Both instruments agreed satisfactorily with each other and with the expected curves for the laminar and turbulent boundary layers. Significant differences were at first seen between the oil film meter and two floating element gages in the case of a favorable pressure gradient, but when a correction is applied to account for the normal force acting on the pendulum-type gage, the three instruents are much closer. The directional sensitivity of the oil film gage is also demonstrated.

Seto, Jeffrey A.↗
NASA NTRS1991

Geochemistry and petrogenesis of proterozoic mafic dykes in north Kerala, southwestern Indian Shield - Preliminary results

Mafic dyke intrusions occur in three distinct orientations ( NNW-SSE and NW-SE and NE-SW) in north Kerala regions, the southwestern part of the Indian Shield. Dating of two NNW-SSE trending dykes by K-Ar method has yielded Middle Proterozoic ages (ca. 1660 Ma and ca. 1420 Ma respectively). Our initial geochemical results on these dyke rocks (0.65-0.15 wt pct K2O, 0.37-0.38 wt pct P2O5, 3.30-1.00 wt pct TiO2, 11-1 p.p.m. Rb, 250-90 p.p.m. Sr, 230-40 p.p.m. Ba, 160-40 p.p.m. Zr, and 30-10 x chondrite rare earth elemental abundances) indicate a transitional character between abyssal and plateau tholeiites. Petrogenetic modelling suggests that the dyke compositions have been derived by different degrees of partial melting of a heterogenous source mantle. The mantle sources with accessory amphibole and/or garnet, variably enriched in LREE and LIL elements, are compatible with the observed geochemical data.

Radhakrishna, T.↗
NASA NTRS1994

Solar fine scale structures in the corona, transition region, and lower atmosphere

The American Science and Engineering Soft X-ray Imaging Payload and the Naval Research Laboratory High Resolution Telescope and Spectrograph (HRTS) were launched from White Sands on 1987 December 11 in coordinated sounding rocket flights. The goal was to investigate the correspondence of fine-scale structures from different temperature regimes in the solar atmosphere, and particularly the relationship between X-ray bright points (XBPs) and transition region explosive events. We present results of the analysis of co-aligned X-ray images, maps of sites of transition region explosive events observed in C IV 10(exp 5), HRTS 1600 A spectroheliograms of the T(sub min) region, and ground-based magnetogram and He I 10830 A images. We examined the relationship of He I 10830 A dark features and evolving magnetic features which correspond to XBPs. We note a frequent double ribbon pattern of the He I dark feature counterparts to XBPs. We discuss an analysis of the relationship of XBPs to evolving magnetic features by Webb et al., which shows that converging magnetic features of opposite polarity are the most significant magnetic field counterparts to XBPs. The magnetic bipolar features associated with XBPs appear as prominent network elements in chromospheric and transition region images. The features in C IV observations corresponding to XBP sites are in general bright, larger scale (approximately 10 arcsec) regions of complex velocity fields of order 40 km/s, which is typical of brighter C IV network elements. These C IV features do not reach the approximately 100 km/s velocities seen in the C IV explosive events. Also, there are many similar C IV bright network features without a corresponding XBP in the X-ray image. The transition region explosive events do not correspond directly to XBPs. The explosive events appear to be concentrated in the quiet Sun at the edges of strong network, or within weaker field strength network regions. We find a greater number of C IV events than expected from the results of a previous Spacelab 2 HRTS disk survey. We attribute this at least partly to better spatial resolution with the newer HRTS data. The full-disk X-ray image shows a pattern of dark lanes in quiet Sun areas. The number density of C IV events is twice as large inside as outside a dark lane (4.6 x 10(exp -3) vs. 2.3 x 10(exp -3) explosive events per arcsec (exp 2)). The dark lane corresponds to an old decaying magnetic neutral line. We suggest that this provides an increased opportunity for small-scale convergence and reconnection of opposite polarity magnetic field features, in analogy with the results of Webb et al. for XBPs but at a reduced scale of reconnection.

Moses, Dan↗
NASA NTRS1977

Vibrational and rotational transitions in low-energy electron-diatomic-molecule collisions. I - Close-coupling theory in the moving body-fixed frame. II - Hybrid theory and close-coupling theory: An /l subscript z-prime/-conserving close-coupling approximation

A detailed vibrational-rotational (V-R) close-coupling formulation of electron-diatomic-molecule scattering is developed in which the target molecular axis is chosen to be the z-axis and the resulting coupled differential equation is solved in the moving body-fixed frame throughout the entire interaction region. The coupled differential equation and asymptotic boundary conditions in the body-fixed frame are given for each parity, and procedures are outlined for evaluating V-R transition cross sections on the basis of the body-fixed transition and reactance matrix elements. Conditions are discussed for obtaining identical results from the space-fixed and body-fixed formulations in the case where a finite truncated basis set is used. The hybrid theory of Chandra and Temkin (1976) is then reformulated, relevant expressions and formulas for the simultaneous V-R transitions of the hybrid theory are obtained in the same forms as those of the V-R close-coupling theory, and distorted-wave Born-approximation expressions for the cross sections of the hybrid theory are presented. A close-coupling approximation that conserves the internuclear axis component of the incident electronic angular momentum (l subscript z-prime) is derived from the V-R close-coupling formulation in the moving body-fixed frame.

Choi, B. H.↗
NASA NTRS1980

Relativistic K-shell Auger rates, level widths, and fluorescence yields

Systematic relativistic (Dirac-Hartree-Slater) calculations of atomic K-shell Auger transition probabilities are reported for 25 elements with Z between 18 and 96, inclusive. K-level Auger widths are found to be enhanced by relativistic effects, while total K-level widths are reduced. Relativistic theoretical K-shell fluorescence yields are in excellent agreement with experiment. Theoretical relative intensities of K-LX Auger transitions in heavy elements, calculated in j-j coupling, agree well with measurements; for low Z, configuration interaction and intermediate coupling must apparently be included.

Chen, M. H.↗
NASA NTRS1999

X-33 Hypersonic Boundary Layer Transition

Boundary layer and aeroheating characteristics of several X-33 configurations have been experimentally examined in the Langley 20-Inch Mach 6 Air Tunnel. Global surface heat transfer distributions, surface streamline patterns, and shock shapes were measured on 0.013-scale models at Mach 6 in air. Parametric variations include angles-of-attack of 20-deg, 30-deg, and 40-deg; Reynolds numbers based on model length of 0.9 to 6.6 million; and body-flap deflections of 0, 10 and 20-deg. The effects of discrete and distributed roughness elements on boundary layer transition, which included trip height, size, location, and distribution, both on and off the windward centerline, were investigated. The discrete roughness results on centerline were used to provide a transition correlation for the X-33 flight vehicle that was applicable across the range of reentry angles of attack. The attachment line discrete roughness results were shown to be consistent with the centerline results, as no increased sensitivity to roughness along the attachment line was identified. The effect of bowed panels was qualitatively shown to be less effective than the discrete trips; however, the distributed nature of the bowed panels affected a larger percent of the aft-body windward surface than a single discrete trip.

Berry, Scott A.↗
NASA NTRS2013

A Comparison of Materials Issues for Cermet and Graphite-Based NTP Fuels

This paper compares material issues for cermet and graphite fuel elements. In particular, two issues in NTP fuel element performance are considered here: ductile to brittle transition in relation to crack propagation, and orificing individual coolant channels in fuel elements. Their relevance to fuel element performance is supported by considering material properties, experimental data, and results from multidisciplinary fluid/thermal/structural simulations. Ductile to brittle transition results in a fuel element region prone to brittle fracture under stress, while outside this region, stresses lead to deformation and resilience under stress. Poor coolant distribution between fuel element channels can increase stresses in certain channels. NERVA fuel element experimental results are consistent with this interpretation. An understanding of these mechanisms will help interpret fuel element testing results.

Nuclear Propulsion↗