Search NASA⌕ Search

SEARCH · Search NASA

Results for “TRANSITION ELEMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Visualization of the strain-induced topological phase transition in a quasi-one-dimensional superconductor TaSe 3

Control of the phase transition from topological to normal insulators can allow for an on/off switching of spin current. While topological phase transitions have been realized by elemental substitution in semiconducting alloys, such an approach requires preparation of materials with various compositions. Thus it is quite far from a feasible device application, which demands a reversible operation. In this work, we use angle-resolved photoemission spectroscopy and spin- and angle-resolved photoemission spectroscopy to visualize the strain-driven band-structure evolution of the quasi-one-dimensional superconductor TaSe 3 . We demonstrate that it undergoes reversible strain-induced topological phase transitions from a strong topological insulator phase with spin-polarized, quasi-one-dimensional topological surface states, to topologically trivial semimetal and band insulating phases. The quasi-one-dimensional superconductor TaSe 3 provides a suitable platform for engineering the topological spintronics, for example as an on/off switch for a spin current that is robust against impurity scattering.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Catalyst design for small molecule activation of energy consequence

This project targets the conversion of ubiquitous small molecules (e.g. NO, CO, H 2 O) into viable precursors to synthetic fuels. Current state of the art catalyst design has not directly targeted transition metal complexes capable of mediating the multi-electron redox processes necessary to reduce the overpotential (energy loss) required achieve efficient activation of small molecule substrates. In this vein, a new strategy has been developed for the assembly of polynuclear architectures; allowing for the construction of tunable polymetallic centers that assemble easily within a pre-organized template (conferring stability, selectivity and tunability) that can effect multi-electron redox processes for reactions. Catalyst development has commenced with the following target design elements: (1) catalysts featuring multiple transition metal ions in the same reaction space to greatly expand accessible molecular redox capabilities; (2) catalysts are assembled in a polynucleating ligand framework that permits control over the cluster morphology as well as the local steric and electronic environment of the transition metal ions within the cluster. The high-tunability of the catalyst composition (metal content) and geometric flexibility has permitted a rigorous assessment of electronic-structure-to-function relationship to be developed, further guiding synthetic efforts to realize more potent catalysts. The numerous permutations possible showcase the high degree of generality to this approach with many synthetic handles to tune redox and reaction chemistry. Trinuclear complexes have been synthesized featuring homo- and hetero-trinuclear cores featuring a variety of first row transition metal ions (Cr→Ni). The molecular clusters have been shown to successfully mediate multi-electron redox processes in a cooperative fashion without requiring strong chemical reductants or oxidants. The reactive molecular complexes are being utilized to activate and breakdown the robust bonds within typical waste stream small molecules (e.g., greenhouse gases) and convert them into value-added commodity chemicals. Ultimately, the catalysts developed by this approach will be required to convert energy acquired via renewable resources (e.g., solar or wind) into synthetic fuels as an energy storage mechanism.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Multistep Coulomb excitation of Ni 64 : Shape coexistence and nature of low-spin excitations

Here, the structure of 64 Ni, the heaviest stable Ni isotope, has been investigated via high-statistics, multistep safe Coulomb excitation to search for shape coexistence, a phenomenon recently observed in neutron-rich 66 Ni and 70 Ni as well as in doubly magic, N = 40, 68 Ni. The study was motivated by recent, state-of-the-art Monte Carlo shell-model calculations (MCSM), where a Hamiltonian with effective interactions incorporating the monopole tensor force predicts the existence of shape coexistence, also in the lower-mass 62,64 Ni isotopes. A set of transition and static E2 matrix elements for both yrast and near-yrast structures was extracted from the differential Coulomb excitation cross sections. From comparisons between the new results and MCSM as well as other shell-model calculations, a clearer picture of the structure of 64 Ni emerges. Specifically, the low-spin states are shown to be dominated by proton and neutron excitations mainly within the fp shell, with minimal contribution from the g 9/2 shape-driving neutron orbital. The agreement between experimental data and MCSM results indicates a small oblate deformation for the $0$$^{+}_{2}$ level and a spherical shape for the $0$$^{+}_{3}$ state. In addition, the small upper limit determined for the B(E2) probability of a transition associated with the decay of the recently observed 3463-keV, $0$$^{+}_{4}$ state agrees with its proposed assignment to a prolate shape, herewith providing first evidence for triple shape coexistence in a stable Ni isotope.

59 ≤ A ≤ 89↗
DOE OSTI2025

Detecting rare earth elements via optically detected magnetic resonance (ODMR) and spin-relaxometry using nitrogen vacancy centers in nanodiamonds

Nanodiamonds embedded with nitrogen-vacancy (NV) centers are emerging as powerful tools in quantum sensing due to their remarkable sensitivity to local variations in electromagnetic fields, temperature, and pressure. These point defects in the diamond lattice can be probed using optically detected magnetic resonance (ODMR) and spin relaxometry techniques, allowing for the detection and characterization of magnetic nanoparticles and ions. The sensing mechanism relies on laser-induced excitation of the NV center's non-degenerate triplet ground state, which promotes electrons to an excited state. Subsequent photoluminescence (PL) emission, which is spin-state dependent, is then measured. These spin states are highly responsive to magnetic perturbations in the surrounding environment. By analyzing changes in the ODMR spectra and spin relaxation times, we can effectively monitor how magnetic species influence the NV center's spin dynamics, thus enabling sensitive and selective characterization of nanoscale magnetic materials. These techniques have been applied for the characterization of transition metals and rare earth elements which shows natural ferromagnetic properties.

magnetic nanopartgicles and ions↗
DOE OSTI2025

High-Energy Density Li-Ion Battery Cathode Using Only Industrial Elements

Li-ion batteries are crucial for the global energy transition to renewables; however, their scalability is limited by the supply of key elements used in commercial cathodes (e.g., Ni, Mn, Co, P). Therefore, there is an urgent need for next-generation cathodes composed of widely available and industrially scalable elements. Here, we introduce a Li-rich cathode based on the known material Li 2 FeS 2 , composed of low-cost elements (Al, Fe, S) that are globally mined and refined at an industrial scale. The substitution of redox-inactive Al 3+ for Fe 2+ achieves remarkably high degrees of anion redox, which, in turn, yields high gravimetric capacity (≈450 mAh·g –1 ) and energy density (≳1000 Wh·kg –1 ). We show that Al 3+ enables high degrees of delithiation by stabilizing the delithiated state, suppressing phase transformations that would otherwise prevent deep delithiation and extensive anion redox. This mechanistic insight offers new possibilities for developing scalable, next-generation Li-ion battery cathodes to meet pressing societal needs.

25 ENERGY STORAGE↗
DOE OSTI2025

Predicting Quantum Criticality in Single-Crystalline Ce 2 Ru 3 Ge 5

Strongly correlated f-electron systems are known to host exotic quantum states, such as quantum criticality, complex order parameters, and unconventional superconductivity. However, the appearance of these exotic states is difficult to predict, making the study of quantum critical behavior challenging, especially in ferromagnetic materials. Herein, we report a structure–property map for Ce 2 M 3 X 5 (M = transition metal; X = main group element) that aids in the targeted design of materials likely to exhibit quantum criticality. Guided by this map, we report on the synthesis of single-crystalline Ce 2 Ru 3 Ge 5 and provide, for the first time, magnetic susceptibility, heat capacity, resistivity, and magnetoresistance measurements on single crystals. Here, we observe a weak ferromagnetic-like response at 7.5 K, which is contrasted with the bulk ferromagnetic ordering that appears in polycrystalline samples. Non-Fermi liquid behavior is seen in the temperature dependent electrical resistivity and heat capacity of the single crystals, suggesting proximity to a ferromagnetic quantum critical point without chemical or physical pressure. Given the contrast with previous reports of polycrystals, these results lead us to propose that single crystalline Ce 2 Ru 3 Ge 5 is intrinsically tuned into the vicinity of a ferromagnetic quantum critical point.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Raman spectroscopic study of anhydrous and hydrous REE phosphates, oxides, and hydroxides

Rare earth elements (REE) include the lanthanides (La–Lu), Y, and Sc which are critical elements for the green energy transition. The REE show a decrease in ionic radii with increased atomic numbers, which results in a so-called lanthanide contraction systematically affecting crystal structures and mineral properties. Here we present a compilation of reference Raman spectra of ten REE sesquioxides (A-, B- and C-type), five REE hydroxides, eight xenotime-structured REE phosphate endmembers and two solid solutions, seven monazite-structured REE phosphate endmembers and two solid solutions and seven rhabdophane endmembers with up to five Ce 1–x LREE x rhabdophane solid solutions (LREE = La–Gd). Raman mode assignment is based on a detailed literature review summarizing existing analytical work and theoretical calculations and systematic trends observed in this study by analyzing different REE-bearing solids. Here, the wavenumbers of the main REE-O Raman band systematically increase with decreasing ionic radii forming discrete linear trends within isostructural mineral groups, that can be used to estimate the REE-O mode in other solids with known REE-O coordination numbers. Photoluminescence using 266 nm, 532 nm and 633 nm excitation laser wavelengths for REE-bearing oxides, hydroxides, anhydrous and hydrous phosphates is also presented providing a new framework for identifying REE-phases in phosphate-bearing natural mineral deposits.

58 GEOSCIENCES↗
DOE OSTI2021

Ab Initio Calculation of the Contact Operator Contribution in the Standard Mechanism for Neutrinoless Double Beta Decay

Starting from chiral nuclear interactions, we evaluate the contribution of the leading-order contact transition operator to the nuclear matrix element (NME) of neutrinoless double-beta decay, assuming a light Majorana neutrino-exchange mechanism. The corresponding low-energy constant (LEC) is determined by fitting the transition amplitude of the nn → ppe – e – process to a recently proposed synthetic datum. We examine the dependence of the amplitude on similarity renormalization group (SRG) scale and chiral expansion order of the nuclear interaction, finding that both dependences can be compensated to a large extent by readjusting the LEC. We evaluate the contribution of both the leading-order contact operator and standard long-range operator to the neutrinoless double-beta decays in the light nuclei 6,8 He and the candidate nucleus 48 Ca. Furthermore, our results provide the first clear demonstration that the contact term enhances the NME by 43(7)% in 48 Ca, where the uncertainty is propagated from the synthetic datum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Machine learning magnetism classifiers from atomic coordinates

The determination of magnetic structure poses a long-standing challenge in condensed matter physics and materials science. Experimental techniques such as neutron diffraction are resource-limited and require complex structure refinement protocols, while computational approaches such as first-principles density functional theory (DFT) need additional semi-empirical correction, and reliable prediction is still largely limited to collinear magnetism. Here, we present a machine learning model that aims to classify the magnetic structure by inputting atomic coordinates containing transition metal and rare earth elements. By building a Euclidean equivariant neural network that preserves the crystallographic symmetry, the magnetic structure (ferromagnetic, antiferromagnetic, and nonmagnetic) and magnetic propagation vector (zero or non-zero) can be predicted with an average accuracy of 77.8% and 73.6%. In particular, a 91% accuracy is reached when predicting no magnetic ordering even if the structure contains magneticelement(s). Ourworkrepresents onestepforwardtosolvingthegrand challenge of full magnetic structure determination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Dithionite Inhibits Iron(III) (Hydr)oxide Formation during Olivine Dissolution Advancing Simultaneous CO 2 Mineralization and Nickel Recovery

Increasing CO 2 concentration poses significant global challenges, impacting both environmental and human health. As we strive for a carbon-neutral energy technology transition, the demand for critical elements (e.g., nickel and cobalt) continues to increase, while high-grade ores are depleting. Combining CO 2 mineralization with the recovery of critical elements from low-grade ores offers an innovative solution. Olivine, a magnesium-rich ultramafic with trace amounts of critical elements, is a promising mineral; however, its impurities, such as iron (Fe(III)), hinder the dissolution of Ni and Mg from olivine, reducing its carbonation and critical element recovery. Here, to address this challenge, this study examined Ni dissolution from San Carlos olivine at high temperatures and high CO 2 pressure. We found that iron(III) (hydr)oxide layers impeded olivine dissolution; however, with sodium dithionite (Na 2 S 2 O 4 ), a reducing agent, olivine dissolution is significantly improved by preventing iron(III) (hydr)oxide formation. With Na 2 S 2 O 4 , within 24 h, Mg and Ni dissolution from olivine increased 2.85-fold and 2.66-fold, respectively, compared to samples without Na 2 S 2 O 4 . After seven cycles, with solutions replaced every 24 h, 98.9% of the total Mg and 84.6% of the total Ni were recovered. This approach enhances olivine’s CO 2 mineralization and improves the sustainability of critical element supply.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Chlorocobaltate-Enabled Selective Separation of CoCl 2 from Mixed Chloride and Nitrate Salts of Mn, Co, and Ni

Described here is the effect of anionic metalates─chlorocobaltate and nitratocobaltate─on the heat-driven separation of the critical element cobalt from potentially competing transition metal salts. Resins bearing the hexadentate glycolamide receptor L (PS-L) exhibit sorption capacities, Q = 1.33 mmol/g for CoCl 2 and Q = 0.66 mmol/g for Co(NO 3 ) 2 , as inferred from sorption isotherm studies. This trend runs counter to the typical Hofmeister series for anion selectivity. Ion chromatographic analysis of a mixed CoCl 2 /Co(NO 3 ) 2 solution revealed an increase in chloride content from 55 mol % to 90 mol % after a single thermally driven catch-and-release cycle. This chloride-selective behavior was recapitulated in a mixed-metal cation, mixed-anion system containing the chloride and nitrate salts of Mn(II), Co(II), and Ni(II) at near-equimolar concentrations. PS-L also displayed enhanced selectivity for Co using this mixed stock solution as observed by ICP-OES. In contrast, for a nitrate-only solution containing Mn(II), Co(II), and Ni(II), PS-L showed increased affinity for Mn, with its proportion rising from 36.6 mol % to 58.1% after a single catch-and-release cycle. Density functional theory calculations support the suggestion that the enhanced uptake of Co(II) in chloride-rich media arises from the high thermodynamic stability of [CoCl 4 ] 2– , which facilitates its outer-sphere coordination to cationic resin-bound cobalt species. Single crystal X-ray crystallographic analyzes of L•MCl 2 (M = Mn, Co, Ni) and L•M(NO 3 ) 2 (M = Mn, Co) confirmed metal complexation by L in the solid state and the concomitant formation of metalate counteranions. Here, the present study highlights a relatively simple approach for separating cobalt from its transition metal congeners.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Spin Transitions and Compressibility of ε-Fe 7 N 3 and γ'-Fe 4 N: Implications for Iron Alloys in Terrestrial Planet Cores

Iron nitrides are possible constituents of the cores of Earth and other terrestrial planets. Pressure-induced magnetic changes in iron nitrides and effects on compressibility remain poorly understood. In this work, we report synchrotron X-ray emission spectroscopy (XES) and X-ray diffraction (XRD) results for ε-Fe 7 N 3 and γ'-Fe 4 N up to 60 GPa at 300 K. The XES spectra reveal completion of high- to low-spin transition in ε-Fe 7 N 3 and γ'-Fe 4 N at 43 and 34 GPa, respectively. The completion of the spin transition induces stiffening in bulk modulus of ε-Fe 7 N 3 by 22% at ~40 GPa, but has no resolvable effect on the compression behavior of γ'-Fe 4 N. Fitting pressure-volume data to the Birch-Murnaghan equation of state yields V 0 = 83.29 ± 0.03 (Å 3 ), K 0 = 232 ± 9 GPa, K 0 ' = 4.1 ± 0.5 for nonmagnetic ε-Fe 7 N 3 above the spin transition completion pressure, and V 0 = 54.82 ± 0.02 (Å 3 ), K 0 = 152 ± 2 GPa, K 0 ' = 4.0 ± 0.1 for γ'-Fe 4 N over the studied pressure range. By reexamining evidence for spin transition and effects on compressibility of other candidate components of terrestrial planet cores, Fe 3 S, Fe 3 P, Fe 7 C 3 , and Fe 3 C based on previous XES and XRD measurements, we located the completion of high- to low-spin transition at ~67, 38, 50, and 30 GPa at 300 K, respectively. The completion of spin transitions of Fe 3 S, Fe 3 P, and Fe 3 C induces elastic stiffening, whereas that of Fe 7 C 3 induces elastic softening. Changes in compressibility at completion of spin transitions in iron-light element alloys may influence the properties of Earth's and planetary cores.

58 GEOSCIENCES↗
DOE OSTI2025

Effective field theories for collective excitations of atomic nuclei

Collective modes emerge as the relevant degrees of freedom that govern low-energy excitations of atomic nuclei. These modes—rotations, pairing rotations, and vibrations—are separated in energy from non-collective excitations, making it possible to describe them in the framework of effective field theory. Rotations and pairing rotations are the remnants of Nambu–Goldstone modes from the emergent breaking of rotational symmetry and phase symmetries in finite deformed and finite superfluid nuclei, respectively. The symmetry breaking severely constrains the structure of low-energy Lagrangians and thereby clarifies what is essential and simplifies the description. The approach via effective field theories exposes the essence of nuclear collective excitations and is defined with a breakdown scale in mind. This permits one to make systematic improvements and to estimate and quantify uncertainties. Effective field theories of collective excitations have been used to compute spectra, transition rates, and other matrix elements of interest. In particular, predictions of the nuclear matrix element for neutrinoless double beta decay then come with quantified uncertainties. This review summarizes these results and also compares the approach via effective field theories to well-known models and ab initio computations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Visualizing nucleation, condensation and propagation of β-tubulin folding in chaperonin TRiC

AbstractThe folding nucleus (FN) initiates protein folding and enables an efficient folding pathway. Here we directly visualize the tubulin FN consisting of a nonnative, partially assembled Rossmann fold, in the closed chamber of human chaperonin TRiC. Chaperonin TRiC interacts with non-natively folded secondary structural elements, stabilizing the nucleus for transition into its first native domain. Through progressive folding, the unfolded sequence goes through drastic spatial arrangement in the TRiC chamber to sample the conformational space, mediated by the highly dynamic CCT tails. The observed presence of individual nonnative secondary structures first in the nonnative FN and then around the incrementally folded native domains supports the hypothesis that tubulin folding in TRiC is a hierarchical process of nucleation, condensation and propagation in cooperation with TRiC subunits.

Zhao, Yanyan (ORCID:0000000323021763)↗
DOE OSTI2023

Triaxiality and the nature of low-energy excitations in Ge 76

The deformation properties of the low-lying states in 76 Ge have been investigated following a safe energy Coulomb excitation measurement with the GRETINA tracking array and CHICO2 heavy-ion counter at the ATLAS accelerator facility at Argonne National Laboratory. A comprehensive set of transition and static E2 matrix elements were extracted from the measured differential Coulomb cross-sections, and compared with results of configuration interaction shell-model calculations and computations carried out within the framework of the generalized triaxial rotor model. The remarkable agreement between the calculated and experimental data supports a near-maximum triaxial deformation for the ground state of 76 Ge. Additionally, the degree of softness of the asymmetry in 76 Ge and 76 Se was investigated using rotational invariants generated from configuration interaction shell-model wave functions computed with the jj44b and JUN45 effective interactions. The resulting invariants are shown to be consistent with a stiff triaxial deformation in 76 Ge and a predominantly soft triaxial potential for 76 Se, in agreement with the conclusions of recent works by this collaboration.

59 ≤ A ≤ 89↗
DOE OSTI2024

Migration of 60 Co, 133 Ba, 137 Cs, and 152 Eu from cementitious wasteforms in field lysimeter experiments

Safe and effective storage of radioactive waste is essential to protect environmental health. Due to the potential for accidental releases and the severity of the associated risks, it is imperative to further understand radionuclide transport should an accident occur. This work analyzed the vadose zone migration of radionuclides from cementitious wasteforms at the Savannah River Site after ten years. The observed radionuclides are prominent constituents of radioactive waste or analogs for other groups or series of radionuclides. Lysimeters were first analyzed in 2016 using a collimated high-purity germanium gamma-ray spectrometer to non-destructively measure the concentration of each radionuclide in the sediment column as a function of depth. Following these measurements, the lysimeters were redeployed in the field for another 4 years. All radionuclides in all lysimeters were observed to transport further during the redeployment period; however, the extent of migration varied with the material used for introduction. Except for 137 Cs, migration through the sediment control system increased with decreasing ionic potential (ionic charge/radius); migration order: 152 Eu< 137 Cs< 60 Co< 133 Ba. Overall, the cementitious wasteforms were observed to decrease radionuclide migration extent relative to the filter paper. In both cementitious wasteforms, the migration extent increased in the order 152 Eu< 133 Ba< 60 Co< 137 Cs. However, less migration was measured when the radionuclides were incorporated into a reducing grout wasteform. The novelty of this paper is the demonstration of a technique capable of creating non-destructive measurements over decade time scales. Ultimately, this work provides insight into the long-term migration of alkali, alkali earth, divalent transition metal, and trivalent actinide element isotopes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

MR13A-3183: Microbial and Geochemical Characterization of Groundwater: Implications for Underground Hydrogen Storage Leakage

Underground hydrogen storage (UHS) in geological formations is a key element of the clean energy transition as it enables the decarbonization of the transportation and industrial sectors by decoupling hydrogen production and storage. UHS has many benefits, including low cost, much wider availability, large storage capacity, well-established infrastructure, and increased safety because of geological sealing capabilities. However, the impact of hydrogen (H2) biogeochemical interactions in the presence of subsurface microorganisms is largely neglected from UHS perspectives. These interactions might affect the effectiveness of storage and can even cause H2 to leak into the shallow aquifers. Leakage of H2 into groundwater can change the geochemistry and induce several microbial-driven processes. Microorganisms, such as sulfate-reducers, are naturally abundant in groundwater and consume H2 to produce hydrogen sulfide (H2S), which can contaminate the freshwater drinking groundwater and cause damage to infrastructure. Hydrogen leakage can also trigger microbial reactions responsible for metal mobility, which can impact the water quality. However, the kinetics of these reactions and the temporal impact of hydrogen leakage in groundwater are still unknown. Therefore, a time series hydrogen-groundwater interaction experiment was conducted, and the changes in fluid chemistry and headspace gas composition will be analyzed along with DNA sequencing results to understand the extent and kinetics of biogeochemical reactions that occur if hydrogen leaks into groundwater. In the experiments, Ultra High Purity (UHP) hydrogen gas will be injected into glass vials with groundwater samples, for a designated time period. For each glass-sealed vial, 16S rRNA gene sequencing, IC, ICP-MS, and GC-TCD will be performed. The experiments provide insights into plausible impacts of hydrogen leakage into shallow drinking water aquifers.

Clark, Allison [West Virginia University (WVU)]↗
DOE OSTI2020

Perspectives on Quenching and Tempering 4340 Steel

Steels are ubiquitous due to their affordability and the landscape of useful properties that can be generated for engineering applications. But to further expand the performance envelope, one must be able to understand and control microstructure development by alloying and processing. In this paper we use multiscale, advanced characterization to better understand the structural and chemical evolution of AISI 4340 steel after quenching and tempering (Q&T), including the role of quench rate and short-time, isothermal tempering below 573 K (300 °C), with an emphasis on carbide formation. We compare the microstructure and/or property changes produced by conventional tempering to those produced by higher temperature, short-time “rapid” tempering. We underscore that no single characterization technique can fully capture the subtle microstructure changes like carbon redistribution, transition carbide and/or cementite formation, and retained austenite decomposition that occur during Q&T. Only the use of multiple techniques begins to unravel these complexities. After controlled fast or slow quenching, η transition carbides clearly exist in the microstructure, likely associated with autotempering of this high martensite start temperature (Ms) steel. Isothermal tempering below 598 K (325 °C) results in the relief of carbon supersaturation in the martensite, primarily by the formation of η transition carbides that exhibit a range of carbon levels, seemingly without substitutional element partitioning between the carbide and matrix phases. Hägg transition carbide is present between 300 °C and 325 °C. After conventional tempering at or above 598 K (325 °C) for 2 h, cementite is predominant, but small amounts of cementite are also present in other conditions, even after quenching. Previous work has indicated that silicon (Si) and substitutional elements partition between the cementite, which initially forms under paraequilibrium conditions, and the matrix. Phosphorous (P) may also be preferentially located at cementite/matrix interfaces after high temperature tempering. Slower quench rates result in greater amounts of retained austenite compared to those after fast quenching, which we attribute to increased austenite stability resulting from “autopartitioning”. Rapid, high temperature tempering is also found to diminish tempered martensite embrittlement (TME) believed to be associated with the extent of austenite decomposition, resulting in mechanical properties not attainable by conventional tempering, which may have important implications with respect to industrial heat treatment processes like induction tempering. Controlling the amount and stability of retained austenite is not only relevant to the properties of Q&T steels, but also next-generation advanced high strength steels (AHSS) with austenite/martensite mixtures.

36 MATERIALS SCIENCE↗