Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tabulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Poster — Thur Eve — 20: CTDI Measurements using a Radiochromic Film-based clinical protocol

The purpose of the study was evaluating accuracy and reproducibility of a radiochromic film-based protocol to measure computer tomography dose index (CTDI) as a part of annual QA on CT scanners and kV-CBCT systems attached to linear accelerators. Energy dependence of Gafchromic XR-QA2 ® film model was tested over imaging beam qualities (50 – 140 kVp). Film pieces were irradiated in air to known values of air-kerma (up to 10 cGy). Calibration curves for each beam quality were created (Film reflectance change Vs. Air-kerma in air). Film responses for same air-kerma values were compared. Film strips were placed into holes of a CTDI phantom and irradiated for several clinical scanning protocols. Film reflectance change was converted into dose to water and used to calculate CTDIvol values. Measured and tabulated CTDIvol values were compared. Average variations of ±5.2% in the mean film reflectance change were observed in the energy range of 80 to 140 keV, and 11.1% between 50 and 140 keV. Measured CTDI values were in average 10% lower than tabulated CTDI values for CT-simulators, and 44% higher for CBCT systems. Results presented a mean variation for the same machine and protocol of 2.6%. Variation of film response is within ±5% resulting in ±15% systematic error in dose estimation if a single calibration curve is used. Relatively large discrepancy between measured and tabulated CTDI values strongly support the trend towards replacing CTDI value with equilibrium dose measurement in the center of cylindrical phantom, as suggested by TG- 111.

07 ISOTOPE AND RADIATION SOURCES↗

Spitfire

Spitfire is a Python and C++ code for solving canonical flame structure problems to build tabulated chemistry models for the simulation of large-scale fires. Spitfire is a modular software with performance critical code written in C++, abstract numerical methods provided in Python, and chemistry tabulation techniques made convenient for high-level use by non-expert users. It facilitates both high-level usage and novel research in tabulated chemistry approaches. SAND2019-11791 M Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Armstrong, Elizabeth↗

HTTR 3 D Cross Section Generation with Serpent and MAMMOTH

The High Temperature Test Reactor (HTTR) is a graphite moderated thermal reactor with a nominal power output of 30 MWth. The purpose of this work is to prepare a set of neutron cross sections for use in the transient analyses of three Loss of Forced Cooling (LOFC) events planned for this reactor. The cross sections are generated with the Serpent 2 3 D Monte Carlo code to include the axial heterogeneity and the strong axial coupling of this core. The approach yields good agreement of results when compared to previously used 2 D lattice models, which require a fine spatial discretization and, surprisingly, comes at a higher computational cost. In addition, the temperature distribution must be considered to obtain reasonable cross sections and the axial leakage component dominates the spectral effects in the core. Consequently, a temperature model as a function of the fuel and moderator temperatures is adopted, and the core is depleted to 390 effective full-power days (EFPDs). A full tabulation of cross sections is prepared at this burnup point for a variety of fuel and moderator temperatures. Next, the multiphysics reactor application MAMMOTH is used to evaluate the quality of these cross sections using a diffusion solver. As expected, the homogenization error in the cross sections is significant and the Super Homogenization (SPH) correction from MAMMOTH is necessary to preserve key reaction rates. The SPH corrected MAMMOTH results are in excellent agreement with the Serpent results and reproduce both the reference power profile and temperature coefficients at each tabulation point. This fact confirms the accuracy of the SPH corrected cross sections and demonstrates the maturity of using Serpent 2 and MAMMOTH for 3 D cross section generation, even for reactors as complex as the HTTR. Finally, the authors recommend that the cross sections should be parametrized with the local burnup and that a full core burnup calculation with coupled thermal fluids would provide a better estimate of the initial condition for any subsequent transient analysis. Unfortunately, this was not within the scope of this work, and direct analysis with these tabulations should be considered as a first order approximation, at best.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Correct Interpretations of ENDF-102 Definitions for Resonance Effects

My Uncle Willie circa 1600 wrote “What’s in a name; a rose by any other name would smell as sweet.” I fear in this case we have a somewhat similar problem in that we may be using the same word but are not using the same definition; specifically, the word Unresolved. The simplest physics definition as it applies to neutron resonances, is the energy point where we can no longer see/measure ALL – let me repeat that – ALL - of the individual resonances. That seems simple and clear, but the question is: how to represent resonances beyond this point in order to accurately reproduce the effects we have seen in measurements and expect/need to reproduce in our applications. We know there are more, unseen resonances, otherwise we wouldn’t say Unresolved. The ENDF approach is well defined in ENDF-102 and simple: for ENDF data the only way to represent Unresolved data is by using a theoretical model to define the distribution of resonances, including those that are too narrow to measure (i.e., are unresolved). It is important to note that in ENDF this is the one and only Unresolved model, e.g., there is no provision in ENDF to accurately define individually ALL resonances above the Resolved energy range – by ALL here I mean both those that we can measure and those that we cannot individually measure, but that theory and integral measurements tells us are present. An alternative approach, which would appear to be equally valid, would be to include the latest measured data as tabulated energy expendent data extending upwards in energy above the Resolved energy range. In this approach the evaluation would not include an ENDF style Unresolved energy range; it would only include a Resolved resonance region, followed by tabulated higher energy points, representing the resonances that could be measured beyond the Resolved range. But an important point to note: By listing these resonances above the resolved energy one admits that at least some resonances in this energy range are missing as Unresolved; i.e., they are too narrow or overlapping to measure. The purpose of this paper is to illustrate that the later approach, while done with good intentions, and appearing to be valid/adequate in plots, does not meet the need of our engineering applications. Why? As we will see below, of these two possible approaches, only the ENDF use of a model to statistically include the missing, i.e., unresolved, resonances, can meet our engineering needs to reproduce the integral effects we have measured and understand. Only with this statistical model can we predict and include in our calculated results the important effects of temperature (Doppler broadening), and energy integrals (self-shielding). Below I will first present results using two ENDF/B-VIII.1 evaluations, U235 and U238, that use the correct ENDF-102 definition of an Unresolved resonance region, using a statistical model to include the effects of resonances that theory predicts are present, but are too narrow to measure. These two evaluations reproduce the expected temperature (Doppler) and energy integral (self-shielding) effects that we expect. Next I will present results using one ENDF/B-VIII.1 evaluation, 26-Fe-56, that does not use an ENDF-102 Unresolved resonance region; instead above its Resolved energy range it lists many tabulated energy points, that look like measured data, but by definition, since they are included above the ENDF Resolved energy range there are missing Unresolved resonances, i.e., there are missing the resonances that are too narrow to resolve, i.e., are unresolved. My conclusion, and I hope yours, is that the below figures illustrate that this approach does not reproduce the temperature and energy integrals that we expect and need to accurately calculate results for our fission reactor calculations. As such this approach should not be used in ENDF formatted evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Normal- and oblique-shock flow parameters in equilibrium air including attached-shock solutions for surfaces at angles of attack, sweep, and dihedral

Normal- and oblique-shock flow parameters for air in thermochemical equilibrium are tabulated as a function of shock angle for altitudes ranging from 15.24 km to 91.44 km in increments of 7.62 km at selected hypersonic speeds. Post-shock parameters tabulated include flow-deflection angle, velocity, Mach number, compressibility factor, isentropic exponent, viscosity, Reynolds number, entropy difference, and static pressure, temperature, density, and enthalpy ratios across the shock. A procedure is presented for obtaining oblique-shock flow properties in equilibrium air on surfaces at various angles of attack, sweep, and dihedral by use of the two-dimensional tabulations. Plots of the flow parameters against flow-deflection angle are presented at altitudes of 30.48, 60.96, and 91.44 km for various stream velocities.

Hunt, J. L.↗

Effect of impurities and processing on silicon solar cells. Volume 1: Characterization methods for impurities in silicon and impurity effects data base

Two major topics are treated: methods to measure and evaluate impurity effects in silicon and comprehensive tabulations of data derived during the study. Discussions of deep level spectroscopy, detailed dark I-V measurements, recombination lifetime determination, scanned laser photo-response, conventional solar cell I-V techniques, and descriptions of silicon chemical analysis are presented and discussed. The tabulated data include lists of impurity segregation coefficients, ingot impurity analyses and estimated concentrations, typical deep level impurity spectra, photoconductive and open circuit decay lifetimes for individual metal-doped ingots, and a complete tabulation of the cell I-V characteristics of nearly 200 ingots.

Hopkins, R. H.↗

Electron-nitrogen molecular collisions in high-temperature nonequilibrium air

Ab initio calculation of vibrational excitation and deexcitation cross sections of N2 by low energy resonant electron impact have been carried out. The calculation includes initial target state in v = 0-12 and final target state in v = 0-17. The calculated cross sections are found to agree with available experimental data to within reported experimental error. Effect of target rotation has been investigated. Comparison of vibrational excitation cross sections at J = 0, 50, and 150 shows that the major effect of target rotation is to lower the resonance energy. Vibrational excitation and deexcitation rate coefficients are tabulated for electron temperatures of 1100-55,000 K. The present tabulation supercedes an earlier compilation by the Naval Research Laboratory that was derived from experimental data with a factor-of-two error. The tabulated rate coefficients are suited for flowfield modeling of aeroassisted orbital transfer vehicles.

Huo, W. M.↗

A method for calculation of free-space sound pressures near a propeller in flight including considerations of the chordwise blade loading

This report presents tabulated values of certain definite integral that are involved in the calculation of near-field propeller noise when the chordwise forces are assumed to be either uniform or of a Dirac delta type. The tabulations are over a wide range of operating conditions and are useful for estimating propeller noise when either the concept of an effective radius or radial distributions of forces are considered. Use of the tabulations is illustrated by several examples of calculated results for some specific propellers.

NOISE↗

Algorithm for Atmospheric and Glint Corrections of Satellite Measurements of Ocean Pigment

An algorithm is developed to correct satellite measurements of ocean color for atmospheric and surface reflection effects. The algorithm depends on taking the difference between measured and tabulated radiances for deriving water-leaving radiances. 'ne tabulated radiances are related to the measured radiance where the water-leaving radiance is negligible (670 nm). The tabulated radiances are calculated for rough surface reflection, polarization of the scattered light, and multiple scattering. The accuracy of the tables is discussed. The method is validated by simulating the effect of different wind speeds than that for which the lookup table is calculated, and aerosol models different from the maritime model for which the table is computed. The derived water-leaving radiances are accurate enough to compute the pigment concentration with an error of less than q 15% for wind speeds of 6 and 10 m/s and an urban atmosphere with aerosol optical thickness of 0.20 at lambda 443 nm and decreasing to 0.10 at lambda 670 nm. The pigment accuracy is less for wind speeds less than 6 m/s and is about 30% for a model with aeolian dust. On the other hand, in a preliminary comparison with coastal zone color scanner (CZCS) measurements this algorithm and the CZCS operational algorithm produced values of pigment concentration in one image that agreed closely.

Fraser, Robert S.↗

Ab Initio Calculations of Water Line Strengths

We report on the determination of a high quality ab initiu potential energy surface (PES) and dipole moment function for water. This PES is empirically adjusted to improve the agreement between the computed line positions and those from the HITRAN 92 data base with J less than 6 for H2O. The changes in the PES are small, nonetheless including an estimate of core (oxygen 1s) electron correlation greatly improves the agreement with experiment. Using this adjusted PES, we can match 30,092 of the 30,117 transitions in the HITRAN 96 data base for H2O with theoretical lines. The 10,25,50,75, and 90 percentiles of the difference between the calculated and tabulated line positions are -0.11, -0.04, -0.01, 0.02, and 0.07 l/cm. Non-adiabatic effects are not explicitly included. About 3% of the tabulated line positions appear to be incorrect. Similar agreement using this adjusted PES is obtained for the oxygen 17 and oxygen 18 isotopes. For HDO, the agreement is not as good, with root-mean-square error of 0.25 l/cm for lines with J less than 6. This error is reduced to 0.02 l/cm by including a small asymmetric correction to the PES, which is parameterized by simultaneously fitting to HDO md D2O data. Scaling this correction by mass factors yields good results for T2O and HTO. The intensities summed over vibrational bands are usually in good agreement between the calculations and the tabulated results, but individual lines strengths can differ greatly. A high temperature list consisting of 307,721,352 lines is generated for H2O using our PES and dipole moment function.

Schwenke, David W.↗

Development and Characterization of a Rate-Dependent Three-Dimensional Macroscopic Plasticity Model Suitable for Use in Composite Impact Problems

Several key capabilities have been identified by the aerospace community as lacking in the material/models for composite materials currently available within commercial transient dynamic finite element codes such as LS-DYNA. Some of the specific desired features that have been identified include the incorporation of both plasticity and damage within the material model, the capability of using the material model to analyze the response of both three-dimensional solid elements and two dimensional shell elements, and the ability to simulate the response of composites composed with a variety of composite architectures, including laminates, weaves and braids. In addition, a need has been expressed to have a material model that utilizes tabulated experimentally based input to define the evolution of plasticity and damage as opposed to utilizing discrete input parameters (such as modulus and strength) and analytical functions based on curve fitting. To begin to address these needs, an orthotropic macroscopic plasticity based model suitable for implementation within LS-DYNA has been developed. Specifically, the Tsai-Wu composite failure model has been generalized and extended to a strain-hardening based orthotropic plasticity model with a non-associative flow rule. The coefficients in the yield function are determined based on tabulated stress-strain curves in the various normal and shear directions, along with selected off-axis curves. Incorporating rate dependence into the yield function is achieved by using a series of tabluated input curves, each at a different constant strain rate. The non-associative flow-rule is used to compute the evolution of the effective plastic strain. Systematic procedures have been developed to determine the values of the various coefficients in the yield function and the flow rule based on the tabulated input data. An algorithm based on the radial return method has been developed to facilitate the numerical implementation of the material model. The presented paper will present in detail the development of the orthotropic plasticity model and the procedures used to obtain the required material parameters. Methods in which a combination of actual testing and selective numerical testing can be combined to yield the appropriate input data for the model will be described. A specific laminated polymer matrix composite will be examined to demonstrate the application of the model.

Impact↗

Robust second-order approximation of the compressible Euler equations with an arbitrary equation of state

Here, this paper is concerned with the approximation of the compressible Euler equations supplemented with an arbitrary or tabulated equation of state. The proposed approximation technique is robust, formally second-order accurate in space, invariant-domain preserving, and works for every equation of state, tabulated or analytic, provided the pressure is nonnegative. An entropy surrogate functional that grows across shocks is proposed. The numerical method is verified with novel analytical solutions and then validated with several computational benchmarks seen in the literature including problems with composite waves.

97 MATHEMATICS AND COMPUTING↗

On the applicability of surrogate-based Markov chain Monte Carlo-Bayesian inversion to the Community Land Model: Case studies at flux tower sites: SURROGATE-BASED MCMC FOR CLM

The Community Land Model (CLM) has been widely used in climate and Earth system modeling. Accurate estimation of model parameters is needed for reliable model simulations and predictions under current and future conditions, respectively. In our previous work, a subset of hydrological parameters has been identified to have significant impact on surface energy fluxes at selected flux tower sites based on parameter screening and sensitivity analysis, which indicate that the parameters could potentially be estimated from surface flux observations at the towers. To date, such estimates do not exist. In this paper, we assess the feasibility of applying a Bayesian model calibration technique to estimate CLM parameters at selected flux tower sites under various site conditions. The parameters are estimated as a joint probability density function (PDF) that provides estimates of uncertainty of the parameters being inverted, conditional on climatologically-average latent heat fluxes derived from observations. We find that the simulated mean latent heat fluxes from CLM using the calibrated parameters are generally improved at all sites when compared to those obtained with CLM simulations using default parameter sets. Further, our calibration method also results in credibility bounds around the simulated mean fluxes which bracket the measured data. The modes (or maximum a posteriori values) and 95% credibility intervals of the site-specific posterior PDFs are tabulated as suggested parameter values for each site. Analysis of relationships between the posterior PDFs and site conditions suggests that the parameter values are likely correlated with the plant functional type, which needs to be confirmed in future studies by extending the approach to more sites.

Huang, Maoyi↗

Electron Bifurcating Hydrogenases

The importance of electron-bifurcating enzymes is manifest by their ability to maximize energy efficiency. Specifically, they couple a downhill oxidation-reduction (redox) reaction with an uphill redox reaction. Since the rapid increase in the discovery of bifurcating enzymes starting in 2008, there has been interest in incorporating their mechanistic principles into artificial/semiartificial systems to drive chemically challenging reactions. This has yet to be achieved, partly because the details of electron bifurcation, i.e. mechanisms, are largely elusive. Nevertheless, much progress has been made in understanding reactivities, structures, and some mechanistic aspects of these enzymes. Notable examples are electron-bifurcating hydrogenases, which are the focus of this chapter. The chapter is organized as follows. Section 11.1 provides an overview of hydrogenases and electron bifurcation. In Section 11.2, some physiological roles of electron-bifurcating hydrogenases are highlighted. Additionally, electron-bifurcating subunit compositions and biochemical reactivities are comprehensively tabulated, and some key points/considerations about these are noted. In Section 11.3, we discuss the known structures of these enzymes, which provide insight into their complex arrangements of redox cofactors, such as iron-sulfur clusters. Also provided are tabulations and discussions of some biophysical properties of the cofactors. In Section 11.4, we discuss the mechanistic proposals of these enzymes, which are primarily based on structural information. Areas of research that are much needed are outlined in Section 11.5. We conclude on the note that what is learned from electron-bifurcating hydrogenases has applicability to other bifurcating enzymes, nonbifurcating analogs, and mechanistic enzymology at large.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A side‐by‐side comparison of CPV module and system performance

Abstract A side‐by‐side comparison is made between concentrator photovoltaic module and system direct current aperture efficiency data with a focus on quantifying system performance losses. The individual losses measured/calculated, when combined, are in good agreement with the total loss seen between the module and the system. Results indicate that for the given test period, the largest individual loss of 3.7% relative is due to the baseline performance difference between the individual module and the average for the 200 modules in the system. A basic empirical model is derived based on module spectral performance data and the tabulated losses between the module and the system. The model predicts instantaneous system direct current aperture efficiency with a root mean square error of 2.3% relative. Copyright © 2016 John Wiley & Sons, Ltd.

Muller, Matthew↗

Establishing Relationships Between the Geometric Structure and Chemical Reactivity of Alloy Catalysts Based on Their Measured Electronic Structure

While it is fairly straightforward to predict the relative chemical reactivity of pure metals, obtaining similar structure-performance relationships for alloys is more challenging. In this contribution we present experimental analysis supported with quantum chemical DFT calculations which allowed us to propose a simple, physically transparent model to predict the impact of alloying on the local electronic structure of different sites in alloys and on the local chemical reactivity. The model was developed through studies of a number of Pt alloys. The central feature of the model is that hybridization of d-orbitals in alloys does not lead to significant charge transfer between the constituent elements in the alloy, and therefore the width of the local density of d-states projected on a site, which is easily calculated from tabulated parameters, is an excellent descriptor of the chemical reactivity of the site.

36 MATERIALS SCIENCE↗

M{sub i} (i = 1-5) subshell fluorescence and Coster-Kronig yields for elements with 67 {<=} Z {<=} 92

A complete set of the M{sub i} (i = 1-5) subshell fluorescence and Coster-Kronig (CK) yields has been generated by interpolation for elements with 67 {<=} Z {<=} 92 from the Dirac-Hartree-Slater (DHS) model based values tabulated for a limited number of elements, considering the cutoff/onset of different CK transitions in accordance with the CK transition energies evaluated in the present work. The CK transition energies have been deduced from tabulated values of the Dirac-Hartree-Fock-Slater model based neutral atom binding energies [K. Huang, M. Aoyagi, M.H. Chen, B. Crasemann, H. Mark, At. Data Nucl. Data Tables 18 (1976) 243] and the L{sub i} (i = 1-3) subshell CK transition energies [M.H. Chen, B. Crasemann, K. Huang, M. Aoyagi, H. Mark, At. Data Nucl. Data Tables 19 (1977) 97] in order to establish the cutoff/onset of different CK transitions at specific atomic numbers. A second set of the M{sub i} (i = 1-5) subshell fluorescence yields have also been deduced using radiative widths computed from the Dirac-Fock (DF) model based X-ray emission rates, and the total widths reevaluated to incorporate the DF model based radiative widths in place of those based on the DHS model. Further, the CK-corrected ({nu}{sub i}) and average fluorescence ({omega}{sub M}) fields, which are experimentally important, have been evaluated from the generated set of CK yields and two sets of fluorescence yields.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron impact collision strengths and transition rates for extreme ultraviolet emission from Xe{sup 10+}

The energy levels, oscillator strengths, and electron impact collision strengths are calculated for the Xe{sup 10+} ion using the configuration interaction scheme implemented by the Flexible Atomic Code. These data pertain to the 3917 levels belonging to the following configurations: 4s{sup 2}4p{sup 6}4d{sup 8}, 4s{sup 2}4p{sup 6}4d{sup 7}4f, 4s{sup 2}4p{sup 6}4d{sup 7}5l (l = s, p, d, or f), 4s{sup 2}4p{sup 5}4d{sup 9}, 4s{sup 2}4p{sup 5}4d{sup 8}4f, 4s{sup 2}4p{sup 5}4d{sup 8}5l, 4s{sup 2}4p{sup 6}4d{sup 6}5s5p, 4s{sup 2}4p{sup 6}4d{sup 6}5p5d. Configuration interactions among these configurations are included in the calculation. Collision strengths are obtained at 10 scattered electron energies (1-1000 eV) and are tabulated here at five representative energies of 10, 50, 100, 500, and 1000 eV. Effective collision strengths are obtained by assuming a Maxwellian electron velocity distribution at 10 temperatures ranging from 10 to 100 eV, and are tabulated at five representative temperatures of 10, 30, 50, 70 and 100 eV in this work. The whole data set should be useful for research involving extreme ultraviolet emission from Xe{sup 10+}.

74 ATOMIC AND MOLECULAR PHYSICS↗