Search NASA⌕ Search

SEARCH · Search NASA

Results for “Taylor approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Development, Verification, and Validation of an OpenFOAM-Based Solver for Modeling Inertial Fusion Energy Chambers

Our work seeks to introduce a computational tool tailored to the physics of inertial fusion energy chambers, in particular, those concepts based on thick liquid walls. In this approach, the structural materials are protected by several neutron mean-free-paths of renewable liquid and thus will be able to survive much longer than un-shielded walls, with virtually all structures lasting for the life of the plant and enabling the use of commercially available and qualified materials. The OpenFOAM-based solver named rhoCentralFoam has been used as a starting point. rhoCentralFoam belongs to the standard OpenFOAM solver toolset. It is a high-speed, explicit compressible flow solver with shock-capturing capability. While the main features have been retained, the solver had to be restructured to make use of tabular data for equations of states, a necessary addition to model the complex thermo-physical properties of ionized gasses. This entailed the need to change the independent state variables used by the solver, resulting in a new thermodynamic library and slightly different solution algorithm. Moreover, a radiation heat transfer model based on the P-1 approximation was added to the solver. The solver is verified against an analytical solution from the Sedov-Taylor-Neumann test problem to showcase the ability of the hydrodynamic solvers to handle strong shocks, whereas the P-1 model was verified using a simple one-dimensional problem with an analytical solution. Additionally, a validation case involving shock-wave propagation through jet array is presented, and the results are compared with experimental data from the open literature. Lastly, in order to showcase the utility of the solver for practical cases, we applied the refined solver to two representative scenarios: gas venting within the HYLIFE-II chamber and the compression of the gas following the partial ablation of the liquid wall.

Chamber dynamics↗
NASA NTRS1989

An implicit and stiffly stable finite element CFD algorithm for unsteady aerodynamics

A stable and accurate finite element CFD algorithm for hyperbolic/incompletely parabolic conservation law systems is described and verified. It combines a Taylor weak statement FEM, an optimal implicit Runge-Kutta time integration algorithm, and a matrix tensor product approximate factorization linear algebra procedure. The results of computational experiments show that the developed algorithm is robust.

Baker, A. J.↗
DOE OSTI2023

Measuring scale-dependent shape anisotropy by coarse-graining: Application to inhomogeneous Rayleigh-Taylor turbulence

Here, we generalize the “filtering spectrum” to probe scales along different directions by spatial coarse-graining. This multidimensional filtering spectrum quantifies the spectral content of flows that are not necessarily homogeneous. From multidimensional spectral information, we propose a simple metric for shape anisotropy at various scales. The method is applied to simulations of two-dimensional (2D) and 3D Rayleigh-Taylor (RT) turbulence, which is inhomogeneous and anisotropic. We show that 3D RT has clear shape anisotropy at large scales with approximately 4:3 vertical to horizontal aspect ratio but tends toward isotropy at small scales as expected. In sharp contrast, we find that RT in 2D simulations, which are still the main modeling framework for many applications, is isotropic at large scales and its shape anisotropy increases at smaller scales where structures tend to be horizontally elongated. While this may be surprising, it is consistent with recent results that large-scale isotropy in 2D RT is due to the generation of a large-scale overturning circulation via an upscale cascade, while small-scale anisotropy is due to the stable stratification resultant from such overturning and the inefficient mixing in 2D.

42 ENGINEERING↗
NASA NTRS1987

On a finite element CFD algorithm for compressible, viscous and turbulent aerodynamic flows

This paper develops and analyses individual construction aspects of an efficient and accurate finite element algorithm for prediction of viscous and turbulent flow fields of impact in aerodynamics. The theoretical construction employs a Taylor weak statement (TWS) for coincident embedding of stability mechanisms within a classic Galerkin finite element formulation of semidiscrete approximation error orthogonalization. A wide variety of the stabilizing mechanisms of independently derived CFD algorithms are contained within the TWS theory. An implicit construction that meets the requirement of efficient convergence to steady state is developed. The theoretical asymptotic error estimates of the TWS finite element algorithm for supersonic and viscous boundary layer flows are verified. Application to a three-dimensional turbulent flow is cited.

Baker, A. J.↗
NASA NTRS1988

Shape optimization of 3D continuum structures via force approximation techniques

The existing need to develop methods whereby the shape design efficiency can be improved through the use of high quality approximation methods is addressed. An efficient approximation method for stress constraints in 3D shape design problems is proposed based on expanding the nodal forces in Taylor series with respect to shape variations. The significance of this new method is shown through elementary beam theory calculations and via numerical computations using 3D solid finite elements. Numerical examples including the classical cantilever beam structure and realistic automotive parts like the engine connecting rod are designed for optimum shape using the proposed method. The numerical results obtained from these methods are compared with other published results, to assess the efficiency and the convergence rate of the proposed method.

Vanderplaats, Garret N.↗
NASA NTRS1987

Spacelab experiments on convection in a rotating spherical shell with radial gravity

Data from the geophysical fluid flow cell experiment on Spacelab 3 revealed the diverse forms of fluid motion that can occur in geometrically simple models of global convection with rotation and radial gravity. The following types of convection were observed: midlatitude waves interacting with the low-latitude columnar convection rolls or 'banana cells', spiral waves' near the poles when latitudinal heating gradients are present on the bounding surfaces, and 'triangular waves' coupling midlatitude and equatorial disturbances under similar differential heating. It is believed that concepts based on the Taylor-Proudman theorem have a central role in many flows realized in the rapidly rotating experiments when H is approximately 0; however, the resulting banana cells are subject to secondary instabilities that produce intricate time dependence and eventually turbulent flows in which only hints of the simpler patterns are recognizable.

Toomre, Juri↗
DOE OSTI2020

A passive model for the evolution of subgrid-scale instabilities in turbulent flow regimes

In this work, a zero-dimensional model for the development of turbulent mixing layers driven by Rayleigh–Taylor (RT) or Richtmyer–Meshkov (RM) instabilities is presented, for application in Reynolds-Averaged Navier–Stokes (RANS) simulations. The model approximates the behavior of the turbulent mixing layer at a passively advected tracer particle that sits on the material interface of interest in the simulation, and is used to provide initial conditions for the RANS model once the mixing layer width has developed to a size that may be resolved on the computational mesh. The model relies on approximations to the Besnard–Harlow–Rauenzahn (BHR) RANS closure equations and is thus consistent the turbulent development of the mixing layer, unlike previous models of this type which have focused on the early-time laminar development of RT or RM instabilities. These instabilities will often grow through an initially laminar state before developing into turbulence, and criteria for switching from an existing laminar model to the proposed turbulent model are considered. The proposed model reproduces the mixing layer development of RT and RM instabilities seen in mixed width resolving BHR RANS simulations to a reasonable degree of accuracy, and relaxes the need for the RANS simulation to resolve the mixed width as soon as the mixing layer becomes turbulent, which may be impractical in cases where the mixing layer grows through a wide range of scales.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1979

Armalcolite/ilmenite - Mineral chemistry, paragenesis, and origin of textures

In order to understand the origin of differing ilmenite/armalcolite textural relationships, bulk rock composition, oxygen fugacity and cooling rate have been experimentally investigated. Results show that armalcolite and ilmenite compositions are dependent upon the liquid composition and temperature at the time of crystallization. Furthermore, the different armalcolite/ilmenite textures rely to a greater extent on f sub O2 than on cooling rate or bulk rock composition, and the Ti(3+) content of armalcolite can be used as an indicator of the approximate f sub O2 prevailing at the time of crystallization.

Stanin, F. T.↗
NASA NTRS1976

Venus cloud structure and water vapor abundance from Mariner 10 observations

Observations of the Venus atmosphere with the infrared radiometer on Mariner 10 have been analyzed by Taylor (1975) in terms of the vertical distribution of opacity at wavelengths near 11 microns and 45 microns in the thermal infrared. In this paper, we discuss models of the Venus atmosphere which are consistent with the inferred opacity structure. Either a two-layer cloud structure, or a single cloud deck overlaid by a layer containing approximately 40 precipitable microns of water vapor, would have the required limb-darkening characteristics at the wavelengths of observation.

Taylor, F. W.↗
NASA NTRS1991

A globally well-posed finite element algorithm for aerodynamics applications

A finite element CFD algorithm is developed for Euler and Navier-Stokes aerodynamic applications. For the linear basis, the resultant approximation is at least second-order-accurate in time and space for synergistic use of three procedures: (1) a Taylor weak statement, which provides for derivation of companion conservation law systems with embedded dispersion-error control mechanisms; (2) a stiffly stable second-order-accurate implicit Rosenbrock-Runge-Kutta temporal algorithm; and (3) a matrix tensor product factorization that permits efficient numerical linear algebra handling of the terminal large-matrix statement. Thorough analyses are presented regarding well-posed boundary conditions for inviscid and viscous flow specifications. Numerical solutions are generated and compared for critical evaluation of quasi-one- and two-dimensional Euler and Navier-Stokes benchmark test problems.

Iannelli, G. S.↗
NASA NTRS1993

The stability of cosmic-ray-dominated shocks - A secondary instability

Previous studies in one spatial dimension showed that the precursors of cosmic-ray-dominated shocks are unstable against traveling acoustic disturbances. Here we report that a secondary, Rayleigh-Taylor type instability can exist in cosmic-ray-dominated media influenced by the acoustic instability. Using the local WKB approximation, the growth rate of the secondary instability is shown to be comparable to that of the one-dimensional acoustic instability itself in the cases we have considered. The nonlinear development has been followed numerically with a two-dimensional PPM hydrodynamics code that also incorporates the two-fluid cosmic-ray energy equation. We show that the secondary instability may cause the precursor and postshock flows to become highly turbulent.

Ryu, Dongsu↗
NASA NTRS1993

High-resolution mid-infrared spectra of Co II, Ni I, and Fe II in SN 1987A

Ground-based infrared observations of SN 1987A on day 612 after the explosion have yielded resolved line profiles of Co II, Ni I, Fe II at 10.52, 11.31, and 17.94 micron, respectively. The spectra were taken at a resolving power of about 1000 with an array grating spectrometer on the 4 m telescope of Cerro Tololo Inter-American Observatory. Based on the observed line intensities we have estimated the minimum mass of each ion: M(Co II) = (6.0 +/- 1.8) x 10 exp -5 solar mass; M(Ni I) = (1.1 +/- 0.1) x 10 exp -3 solar mass; and M(Fe II) = (8.0 +/- 1.5) x 10 exp -3 solar mass. From these we infer total masses for cobalt, nickel, and iron in the ejecta. The nickel and iron line profiles are markedly asymmetric. We interpret these as arising from two components, one centered on the stellar rest velocity with an approximately 3250 km/s full width, and the second at about +1200 km/s with an approximately 1100 km/s full width. The asymmetry may represent a large-scale fracturing of the ejecta by Rayleigh-Taylor instabilities.

Jennings, D. E.↗
DOE OSTI2016

Characterizing phonon dynamics using stochastic sampling

Predicting phonon relaxation time from molecular dynamics (MD) requires a long simulation time to compute the mode energy auto-correlation function. Here, we present an alternative approach to infer the phonon life-time from an approximate form of the energy auto-correlation function. The method requires as an input a set of sampled equilibrium configurations. A stochastic sampling method is used to generate the equilibrium configurations. We consider a truncated Taylor series expansion of the phonon energy auto-correlation function. The different terms in the truncated correlation function are obtained using the stochastic sampling approach. The expansion terms, thus, obtained are in good agreement with the corresponding values obtained using MD. We then use the approximate function to compute the phonon relaxation time. The relaxation time computed using this method is compared with that obtained from the exact correlation function. The two values are in agreement with each other.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Time-resolved terahertz dynamics in thin films of the topological insulator Bi 2 Se 3

We use optical pump–THz probe spectroscopy at low temperatures to study the hot carrier response in thin Bi 2 Se 3 films of several thicknesses, allowing us to separate the bulk from the surface transient response. We find that for thinner films the photoexcitation changes the transport scattering rate and reduces the THz conductivity, which relaxes within 10 picoseconds (ps). For thicker films, the conductivity increases upon photoexcitation and scales with increasing both the film thickness and the optical fluence, with a decay time of approximately 5 ps as well as a much higher scattering rate. Furthermore, these different dynamics are attributed to the surface and bulk electrons, respectively, and demonstrate that long-lived mobile surface photo-carriers can be accessed independently below certain film thicknesses for possible optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2015

2–stage stochastic Runge–Kutta for stochastic delay differential equations

This paper proposes a newly developed one-step derivative-free method, that is 2-stage stochastic Runge-Kutta (SRK2) to approximate the solution of stochastic delay differential equations (SDDEs) with a constant time lag, r > 0. General formulation of stochastic Runge-Kutta for SDDEs is introduced and Stratonovich Taylor series expansion for numerical solution of SRK2 is presented. Local truncation error of SRK2 is measured by comparing the Stratonovich Taylor expansion of the exact solution with the computed solution. Numerical experiment is performed to assure the validity of the method in simulating the strong solution of SDDEs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

INSTABILITY OF MAGNETIZED IONIZATION FRONTS SURROUNDING H II REGIONS

An ionization front (IF) surrounding an H II region is a sharp interface where a cold neutral gas makes the transition to a warm ionized phase by absorbing UV photons from central stars. We investigate the instability of a plane-parallel D-type IF threaded by parallel magnetic fields, by neglecting the effects of recombination within the ionized gas. We find that weak D-type IFs always have the post-IF magnetosonic Mach number M{sub M2}≤1. For such fronts, magnetic fields increase the maximum propagation speed of the IFs, while reducing the expansion factor α by a factor of 1 + 1/(2β{sub 1}) compared to the unmagnetized case, with β{sub 1} denoting the plasma beta in the pre-IF region. IFs become unstable to distortional perturbations owing to gas expansion across the fronts, exactly analogous to the Darrieus-Landau instability of ablation fronts in terrestrial flames. The growth rate of the IF instability is proportional linearly to the perturbation wavenumber, as well as the upstream flow speed, and approximately to α{sup 1/2}. The IF instability is stabilized by gas compressibility and becomes completely quenched when the front is D-critical. The instability is also stabilized by magnetic pressure when the perturbations propagate in the direction perpendicular to the fields. When the perturbations propagate in the direction parallel to the fields, on the other hand, it is magnetic tension that reduces the growth rate, completely suppressing the instability when M{sub M2}{sup 2}<2/(2β{sub 1}−1). When the front experiences an acceleration, the IF instability cooperates with the Rayleigh-Taylor instability to make the front more unstable.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Effects of Strain and Strain Rate on Dynamic Grain Growth and Subgrain Evolution During Plastic Deformation of an Interstitial-Free Steel at 850 ° C

Here, the effects of strain and strain rate on dynamic grain growth (DGG) and subgrain evolution are reported for an interstitial-free steel deformed at 850 ° C. Microstructures produced during tension tests at true-strain rates of 10 -4 and to 10 -3 s -1 true strains ranging from 0.02 to 0.2 were preserved following deformation. These were characterized using electron backscatter diffraction (EBSD), including the application of spherical harmonic transform indexing to produce high-angular-resolution EBSD (HR-EBSD) data. HR-EBSD data resolved the small misorientation angles of subgrain boundaries while imaging much larger data fields than possible with previously available techniques. The resulting data confirmed that steady-state flow stress is inversely proportional to the average subgrain size and that subgrain boundary misorientation angle increases with strain. The following new observations are reported. The rate of DGG increased with respect to time but decreased with respect to strain as strain rate increased. This behavior is rationalized through a simple model using separate rate parameters for the effects of time and strain. Subgrain size was not constant during steady-state deformation, but decreased slowly with increasing strain. Subgrain size distributions and subgrain boundary misorientation angle distributions were measured, and both remained approximately log-normal during steady-state deformation. Subgrain evolution demonstrated no dependence on parent grain size, crystallographic orientation, or Taylor factor. These new data suggest that steady-state flow stress is more likely controlled by the dislocation density internal to subgrains than by the spacing between subgrain boundaries.

dynamic grain growth↗