SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This presentation describes a methodology for predicting probability of failure of wind turbine gearbox bearings failed by axial cracking. This methodology was applied to a commercial MW size wind plant and generated results were correlated with actual failures. This work is partnered with WindESCo and funded through DOE's Technology Commercialization Fund.
The U.S. Department of Energy Office of Technology Transitions is pleased to provide an update on the Energy I-Corps program. Now in its ninth year, Energy I-Corps delivers workforce development training and funding support to accelerate clean energy technology commercialization. As of November 2024, 243 teams from 13 National Labs have participated in Energy I-Corps over the course of 19 cohorts and the pilot. Post Energy I-Corps, technologies have attracted more than $197 million in post-program funding and executed 85 licenses.
In recent years, researchers at the National Renewable Energy Laboratory (NREL) and the University of California Berkeley (UC Berkeley) have independently developed catalysts that convert methanol and dimethyl ether into alkylate-like hydrocarbons with a high-octane value, and both have developed intellectual property around these chemical transformations. Both UC Berkeley and NREL wish to see their technologies commercialized to address a number of domestic and international energy challenges. The technologies developed by NREL and UC Berkeley are complimentary but neither have moved beyond the laboratory scale due to remaining challenges with the catalyst activity and selectivity, and/or with the reaction engineering associated with maximizing the yield of the high-value product. NREL and UC Berkeley wish to collaboratively through a shared resources CRADA to solve issues related to the scale-up and process integration of their high-octane hydrocarbon technologies, thus enabling future licensing of the technology to an industry partner.
Contents include the following: Advanced life support. System integration, modeling, and analysis. Progressive capabilities. Water processing. Air revitalization systems. Why advanced CO2 removal technology? Solid waste resource recovery systems: lyophilization. ISRU technologies for Mars life support. Atmospheric resources of Mars. N2 consumable/make-up for Mars life. Integrated test beds. Monitoring and controlling the environment. Ground-based commercial technology. Optimizing size vs capability. Water recovery systems. Flight verification topics.
Free-space optical communications is a mature technology, using eye-safe beams and small-terminals, that has the potential to increase balloon data readout rates by orders of magnitude. Large commercial memory buffers paired with incredibly high-rate bursted communications – 100 Gbps has already been demonstrated with higher rates possible with existing commercial technologies – could revolutionize how science missions are designed and run. We will give an overview of the technology, show some examples of how it could already be useful to missions, and propose next steps to make affordable and robust systems be available to the balloon community.
The design of highly survivable avionics systems for long-term (> 10 years) exploration of space is an essential technology for all current and future missions in the Outer Planets roadmap. Long-term exposure to extreme environmental conditions such as high radiation and low-temperatures make survivability in space a major challenge. Moreover, current and future missions are increasingly using commercial technology such as deep sub-micron (0.25 microns) fabrication processes with specialized circuit designs, commercial interfaces, processors, memory, and other commercial off the shelf components that were not designed for long-term survivability in space. Therefore, the design of highly reliable, and available systems for the exploration of Europa, Pluto and other destinations in deep-space require a comprehensive and fresh approach to this problem. This paper summarizes work in progress in three different areas: a framework for the design of highly reliable and highly available space avionics systems, distributed reliable computing architecture, and Guarded Software Upgrading (GSU) techniques for software upgrading during long-term missions. Additional information is contained in the original extended abstract.
NASA's Human Exploration and Development of Space (HEDS) Enterprise is defining architectures and requirements for human exploration that radically reduce the costs of such missions through the use of advanced technologies, commercial partnerships and innovative systems strategies. In addition, the HEDS Enterprise is collaborating with the Space Science Enterprise to acquire needed early knowledge about Mars and to demonstrate critical technologies via robotic missions. This paper provides an overview of the technological challenges facing NASA as it prepares for human exploration. Emphasis is placed on identifying the key technologies including those which will provide the most return in terms of reducing total mission cost and/or reducing potential risk to the mission crew. Top-level requirements are provided for those critical enabling technology options currently under consideration.
A study was performed to quantify the potential benefits of utilizing advanced aluminum alloys in commercial transport aircraft and to define the effort necessary to develop fully the alloys to a viable commercial production capability. The comprehensive investigation (1) established realistic advanced aluminum alloy property goals to maximize aircraft systems effectiveness (2) identified performance and economic benefits of incorporating the advanced alloy in future advanced technology commercial aircraft designs (3) provided a recommended plan for development and integration of the alloys into commercial aircraft production (4) provided an indication of the timing and investigation required by the metal producing industry to support the projected market and (5) evaluate application of advanced aluminum alloys to other aerospace and transit systems as a secondary objective. The results of the investigation provided a roadmap and identified key issues requiring attention in an advanced aluminum alloy and applications technology development program.
The U.S. Department of Energy Office of Technology Transitions is pleased to provide an update on the Energy I-Corps program. Now in its eighth year, Energy I-Corps delivers workforce development training and funding support to accelerate clean energy technology commercialization. As of November 2023, 215 teams from 12 National Labs have participated in Energy I-Corps over the course of 17 cohorts and the pilot. More than 20 teams have launched new businesses based on their Energy I-Corps technology. Post Energy I-Corps, technologies have attracted more than $177 million in post-program funding and executed 78 licenses.
The National Energy Technology Laboratory (NETL) and Elysia Labs LLC are embarking on a collaborative project to develop and evaluate a low-cost, high-performance carbon dioxide capture process for the burgeoning Direct Air Capture (DAC) industry. The partnership will focus on developing an electrospun fiber based air contactor that promises higher efficiency and lower costs to set a new standard in the DAC field. The expected outcomes of this collaboration include the creation of a DAC contactor that significantly outperforms existing technologies in cost, capacity, cycle time, regeneration energy, and durability. This project is a result of an awarded project from the Department of Energy’s Direct Air Capture Pre-Commercialization Technology Prize.
The RAZOR EX (Registered Trademark) PCR unit was initially developed by the DoD as part of an SBIR project to detect and identify biothreats during field deployment. The system was evaluated by NASA as a commercial technology for future microbial monitoring requirements and has been successfully demonstrated in microgravity on-board the International Space Station.
A proper evaluation and selection of component technologies is a critical aspect in the development of Integrated Energy System (IES). This study aims to investigate the key components and associated technologies required to build high-temperature heat transport systems for IES. Of particular interest is the component technologies needed to design and construct IES that combines advanced nuclear reactors with high-temperature industrial processes. This study particularly delved into knowledge base, evaluation metrics, and state-of-the-art commercial technologies, aiming to facilitate the evaluation and selection process of various thermal transport components. In addition, an evaluation process was proposed in order to assist in the optimal selection of the thermal transport components based on the knowledge base and evaluation metrics investigated through this study.
Progress has been made into adapting and enhancing a commercially available infrared spectrometer for the development of a handheld device for in-field measurements of the chemical composition of various samples of materials. The intent is to duplicate the functionality of a benchtop Fourier transform infrared spectrometer (FTIR) within the compactness of a handheld instrument with significantly improved spectral responsivity. Existing commercial technology, like the deuterated L-alanine triglycine sulfide detectors (DLATGS), is capable of sensitive in-field chemical analysis. This proposed approach compares several subsystem elements of the FTIR inside of the commercial, non-benchtop system to the commercial benchtop systems. These subsystem elements are the detector, the preamplifier and associated electronics of the detector, the interferometer, associated readout parameters, and cooling. This effort will examine these different detector subsystem elements to look for limitations in each. These limitations will be explored collaboratively with the commercial provider, and will be prioritized to meet the deliverable objectives. The tool design will be that of a handheld gun containing the IR filament source and associated optics. It will operate in a point-and-shoot manner, pointing the source and optics at the sample under test and capturing the reflected response of the material in the same handheld gun. Data will be captured via the gun and ported to a laptop.
This technical report describes the design of a new 22 Megawatt reference wind turbine (RWT). The turbine model was designed collaboratively by two teams at the Denmark Technical University and at the National Renewable Energy Laboratory within the International Energy Agency (IEA) Wind Technology Commercialization Programme (TCP) Task 55 on Reference Wind Turbines and Farms. RWTs serve an important purpose in the wind energy community, since they provide openly available data for models representative of current wind turbine technology, which can be used by practitioners for a variety of modeling purposes, ranging from aerodynamic, structural, and aeroelastic turbine modeling to wind farm flow modeling, across a range of fidelities. The IEA 22 RWT aims to model machines with projected installation in the 2025-2030 time frame. The turbine has a rotor diameter of 284 meters and a hub height of 170 meters. It is a class 1-B machine with a rotor specific power nearing 350 W m -2 and it is mounted on either a fixed-bottom offshore foundation or a semi-submersible floating platform.
Photonic Doppler Velocimetry (PDV) is a fiber-based measurement amenable to a wide range of experimental conditions. Interference between two optical signals—one Doppler shifted and the other not—is the essential principle in these measurements. A confluence of commercial technologies, largely driven by the telecommunication industry, makes PDV particularly convenient at near-infrared wavelengths. This discussion considers how measurement time scales of interest relate to the design, operation, and analysis of a PDV measurement, starting from the steady state through nanosecond resolution. Benefits and outstanding challenges of PDV are summarized, with comparisons to related diagnostics.
Arizona State University (ASU) and the National Energy Technology Laboratory (NETL) will collaborate on the development and scale up of sorbent composites that efficiently capture carbon dioxide (CO 2 ) directly from air under an awarded project from the Department of Energy’s Direct Air Capture (DAC) Pre-Commercialization Technology Prize. For DAC to be considered a viable technology for decarbonization, the cost of carbon removal needs to decrease below the proposed carbon tax incentive outlined in the recent Inflation Reduction Act (IRA) (Section 45 Q), which is set at $\$$180 per ton of CO 2 . Achieving this goal requires the development of a cost-effective, environmentally friendly sorbent with high CO 2 sorption capacity and efficient kinetics under DAC conditions as the overall cost of CO 2 captured is highly sensitive to factors such as sorbent cost and sorbent lifetime. ASU has developed a sorbent technology that can potentially reduce CO 2 removal costs by DAC. NETL has expertise in DAC TEA and LCA development and DAC sorbent testing. The collaboration between ASU and NETL aims to accelerate development and deployment of ASU’s technology by quantifying the performance, cost and lifecycle impacts of ASU’s technology and validating sorbent performance.
This is a final technical report for the American-Made Manufacture of Advanced Key Energy Infrastructure Technologies (MAKE IT) Prize, developed by the U.S. Department of Energy (DOE) Office of Technology Commercialization (OTC) in collaboration with the Office of Clean Energy Demonstrations (OCED) and the Office of Energy Efficiency and Renewable Energy (EERE) with support from the National Laboratory of the Rockies (NLR). The MAKE IT Prize aims to catalyze domestic manufacturing of critical energy technology components, moving manufacturing facilities from planning to shovel-ready and enabling strategies for vibrant manufacturing activities in communities. This prize was launched with a prize pool of approximately $30 million spread across two tracks: Facilities and Strategies.
The National Energy Technology Laboratory (NETL) and Giner Inc. will collaborate in the development and scaling of an electrochemical system to capture and regenerate CO 2 from air with high efficiency and low energy input under an awarded project from the Department of Energy’s Direct Air Capture Pre Commercialization Technology Prize. Giner’s prototype design utilizes a hydroxide-based sorbent to capture the CO 2 from ambient air and convert it to carbonate in solution. The carbonate is then regenerated electrochemically back into CO 2 , releasing a purified, concentrated CO 2 stream ideal for downstream utilization. This process recycles the capture solution and all generated byproducts, including water and hydrogen, making it an extremely resource- and energy-efficient system. This collaboration will facilitate the deployment of this cost-effective solution for direct air capture of CO 2 to enable reduction in global greenhouse gases and advance NETL’s ongoing CO 2 conversion efforts.