Search NASA⌕ Search

SEARCH · Search NASA

Results for “Technology Integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Experimental Durability Testing of 4H SiC JFET Integrated Circuit Technology at 727 C

We have reported SiC integrated circuits (IC's) with two levels of metal interconnect that have demonstrated prolonged operation for thousands of hours at their intended peak ambient operational temperature of 500 C [1, 2]. However, it is recognized that testing of semiconductor microelectronics at temperatures above their designed operating envelope is vital to qualification. Towards this end, we previously reported operation of a 4H-SiC JFET IC ring oscillator on an initial fast thermal ramp test through 727 C [3]. However, this thermal ramp was not ended until a peak temperature of 880 C (well beyond failure) was attained. Further experiments are necessary to better understand failure mechanisms and upper temperature limit of this extreme-temperature capable 4H-SiC IC technology. Here we report on additional experimental testing of custom-packaged 4H-SiC JFET IC devices at temperatures above 500 C. In one test, the temperature was ramped and then held at 727 C, and the devices were periodically measured until electrical failure was observed. A 4H-SiC JFET on this chip electrically functioned with little change for around 25 hours at 727 C before rapid increases in device resistance caused failure. In a second test, devices from our next generation 4H-SiC JFET ICs were ramped up and then held at 700 C (which is below the maximum deposition temperature of the dielectrics). Three ring oscillators functioned for 8 hours at this temperature before degradation. In a third experiment, an alternative die attach of gold paste and package lid was used, and logic circuit operation was demonstrated for 143.5 hours at 700 C.

JFET↗

Development of Bottom-up Representation of Industrial Energy Efficiency Technologies in Integrated Assessment Models for the Iron and Steel Sector

Adoption of efficient end-use technologies is one of the key measures for reducing greenhouse gas (GHG) emissions. With the working of energy programs and policies on carbon regulation, how to effectively analyze and manage the costs associated with GHG reductions become extremely important for the industry and policy makers around the world. Energy-climate (EC) models are often used for analyzing the costs of reducing GHG emissions (e.g., carbon emission) for various emission-reduction measures, because an accurate estimation of these costs is critical for identifying and choosing optimal emission reduction measures, and for developing related policy options to accelerate market adoption and technology implementation. However, accuracies of assessing of GHG-emission reduction costs by taking into account the adoption of energy efficiency technologies will depend on how well these end-use technologies are represented in integrated assessment models (IAM) and other energy-climate models. In this report, we first conduct brief overview on different representations of end-use technologies (mitigation measures) in various energy-climate models, followed by problem statements, and a description of the basic concepts of quantifying the cost of conserved energy including integrating non-regrets options. A non-regrets option is defined as a GHG reduction option that is cost effective, without considering their additional benefits related to reducing GHG emissions. Based upon these, we develop information on costs of mitigation measures and technological change. These serve as the basis for collating the data on energy savings and costs for their future use in integrated assessment models. In addition to descriptions of the iron and steel making processes, and the mitigation measures identified in this study, the report includes tabulated databases on costs of measure implementation, energy savings, carbon-emission reduction, and lifetimes. The cost curve data on mitigation measures are available over time, which allows an estimation of technological change over a decade-long historical period. In particular, the report will describe new treatment of technological change in energy-climate modeling for this industry sector, i.e., assessing the changes in costs and energy-savings potentials via comparing 1994 and 2002 conservation supply curves. In this study, we compared the same set of mitigation measures for both 1994 and 2002 -- no additional mitigation measure for year 2002 was included due to unavailability of such data. Therefore, the estimated potentials in total energy savings and carbon reduction would most likely be more conservative for year 2002 in this study. Based upon the cost curves, the rate of change in the savings potential at a given cost can be evaluated and be used to estimate future rates of change that can be the input for energy-climate models. Through characterizing energy-efficiency technology costs and improvement potentials, we have developed and presented energy cost curves for energy efficiency measures applicable to the U.S. iron and steel industry for the years 1994 and 2002. The cost curves can change significantly under various scenarios: the baseline year, discount rate, energy intensity, production, industry structure (e.g., integrated versus secondary steel making and number of plants), efficiency (or mitigation) measures, share of iron and steel production to which the individual measures can be applied, and inclusion of other non-energy benefits. Inclusion of other non-energy benefits from implementing mitigation measures can reduce the costs of conserved energy significantly. In addition, costs of conserved energy (CCE) for individual mitigation measures increase with the increases in discount rates, resulting in a general increase in total cost of mitigation measures for implementation and operation with a higher discount rate. In 1994, integrated steel mills in the U.S. produced 55.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Integrated optics technology study

The materials and processes available for the fabrication of single mode integrated electrooptical components are described. Issues included in the study are: (1) host material and orientation, (2) waveguide formation, (3) optical loss mechanisms, (4) wavelength selection, (5) polarization effects and control, (6) laser to integrated optics coupling,(7) fiber optic waveguides to integrated optics coupling, (8) souces, (9) detectors. The best materials, technology and processes for fabrication of integrated optical components for communications and fiber gyro applications are recommended.

Chen, B.↗

Novel Low Loss Wide-Band Multi-Port Integrated Circuit Technology for RF/Microwave Applications

In this paper, novel low loss, wide-band coplanar stripline technology for radio frequency (RF)/microwave integrated circuits is demonstrated on high resistivity silicon wafer. In particular, the fabrication process for the deposition of spin-on-glass (SOG) as a dielectric layer, the etching of microvias for the vertical interconnects, the design methodology for the multiport circuits and their measured/simulated characteristics are graphically illustrated. The study shows that circuits with very low loss, large bandwidth, and compact size are feasible using this technology. This multilayer planar technology has potential to significantly enhance RF/microwave IC performance when combined with semi-conductor devices and microelectromechanical systems (MEMS).

Simons, Rainee N.↗

Bottom-up Representation of Industrial Energy Efficiency Technologies in Integrated Assessment Models for the U.S. Pulp and Paper Sector

Adoption of efficient end-use technologies is one of the key measures for reducing greenhouse gas (GHG) emissions. How to effectively analyze and manage the costs associated with GHG reductions becomes extremely important for the industry and policy makers around the world. Energy-climate (EC) models are often used for analyzing the costs of reducing GHG emissions for various emission-reduction measures, because an accurate estimation of these costs is critical for identifying and choosing optimal emission reduction measures, and for developing related policy options to accelerate market adoption and technology implementation. However, accuracies of assessing GHG-emission reduction costs by taking into account the adoption of energy efficiency technologies will depend on how well these end-use technologies are represented in integrated assessment models (IAM) and other energy-climate models. In this report, we first conduct a brief review of different representations of end-use technologies (mitigation measures) in various energy-climate models, followed by the problem statement, and a description of the basic concepts of quantifying the cost of conserved energy including integrating no-regrets options.

03 NATURAL GAS↗

PowerChip: Advanced Technologies for Integrated Power Electronics

To realize advances in power conversion technology, the research project investigated three areas: 1) new power semiconductor devices; 2) new magnetic materials and component designs; and 3) new circuit architectures and topologies to realize higher degrees of miniaturization, integration and performance. The application focus was on power converters for driving LED loads, encompassing ac-to-dc and dc-to-dc conversion from moderate voltage levels (to above 100 V) to low voltages (e.g., tens of Volts) at low to moderate operating power levels (e.g., tens of Watts). Semiconductor device research focused on the performance, reliability and improved design of devices based on Gallium Nitride (GaN). Magnetics research focused on both development of new magnetic materials suitable to higher operating frequencies and on microfabrication of magnetic components. Systems research focused on leveraging these advances to attain higher operating frequencies, miniaturization and performance as compared to the present state of the art.

Perreault, David↗

Development of rapid bioconversion with integrated recycle technology for ethanol production from extractive ammonia pretreated corn stover

ABSTRACT High enzyme loading and low productivity are two major issues impeding low cost ethanol production from lignocellulosic biomass. This work applied rapid bioconversion with integrated recycle technology (RaBIT) and extractive ammonia (EA) pretreatment for conversion of corn stover (CS) to ethanol at high solids loading. Enzymes were recycled via recycling unhydrolyzed solids. Enzymatic hydrolysis with recycled enzymes and fermentation with recycled yeast cells were studied. Both enzymatic hydrolysis time and fermentation time were shortened to 24 h. Ethanol productivity was enhanced by two times and enzyme loading was reduced by 30%. Glucan and xylan conversions reached as high as 98% with an enzyme loading of as low as 8.4 mg protein per g glucan. The overall ethanol yield was 227 g ethanol/kg EA‐CS (191 g ethanol/kg untreated CS). Biotechnol. Bioeng. 2017;114: 1713–1720. © 2017 Wiley Periodicals, Inc.

Jin, Mingjie↗

Experimental Durability Testing of 4H SiC JFET Integrated Circuit Technology at 727 Degrees Centigrade

We have reported SiC integrated circuits (ICs) with two levels of metal interconnect that have demonstrated prolonged operation for thousands of hours at their intended peak ambient operational temperature of 500 degrees Centigrade. However, it is recognized that testing of semiconductor microelectronics at temperatures above their designed operating envelope is vital to qualification. Towards this end, we previously reported operation of a 4H-SiC JFET IC ring oscillator on an initial fast thermal ramp test through 727 degrees Centigrade. However, this thermal ramp was not ended until a peak temperature of 880 degrees Centigrade (well beyond failure) was attained. Further experiments are necessary to better understand failure mechanisms and upper temperature limit of this extreme-temperature capable 4H-SiC IC technology.Here we report on additional experimental testing of custom-packaged 4H-SiC JFET IC devices at temperatures above 500 degrees Centigrade. In one test, the temperature was ramped and then held at 727 degrees Centigrade, and the devices were periodically measured until electrical failure was observed. A 4H-SiC JFET on this chip electrically functioned with little change for around 25 hours at 727 degrees Centigrade before rapid increases in device resistance caused failure. In a second test, devices from our next generation 4H-SiC JFET ICs were ramped up and then held at 700 degrees Centigrade (which is below the maximum deposition temperature of the dielectrics). Three ring oscillators functioned for 8 hours at this temperature before degradation. In a third experiment, an alternative die attach of gold paste and package lid was used, and logic circuit operation was demonstrated for 143.5 hours at 700 degrees Centigrade.

Silicon Carbide↗

Advanced Power Electronics for LED Drivers: Advanced Technologies for integrated Power Electronics

ADEPT Project: MIT is teaming with Georgia Institute of Technology, Dartmouth College, and the University of Pennsylvania (UPenn) to create more efficient power circuits for energy-efficient light-emitting diodes (LEDs) through advances in 3 related areas. First, the team is using semiconductors made of high-performing gallium nitride grown on a low-cost silicon base (GaN-on-Si). These GaN-on-Si semiconductors conduct electricity more efficiently than traditional silicon semiconductors. Second, the team is developing new magnetic materials and structures to reduce the size and increase the efficiency of an important LED power component, the inductor. This advancement is important because magnetics are the largest and most expensive part of a circuit. Finally, the team is creating an entirely new circuit design to optimize the performance of the new semiconductors and magnetic devices it is using.

ADEPT↗

Integrated optics technology study

The status and near term potential of materials and processes available for the fabrication of single mode integrated electro-optical components are discussed. Issues discussed are host material and orientation, waveguide formation, optical loss mechanisms, wavelength selection, polarization effects and control, laser to integrated optics coupling fiber optic waveguides to integrated optics coupling, sources, and detectors. Recommendations of the best materials, technology, and processes for fabrication of integrated optical components for communications and fiber gyro applications are given.

Chen, B.↗

The Habitat Demonstration Unit Project

This paper will describe an overview of the NASA-led multi-center Habitat Demonstration Unit (HDU) Project. The HDU project is a technology-pull project that integrates technologies and innovations from numerous NASA centers. This project will be used to investigate and validate surface architectures, operations concepts, and requirements definition. The HDU project will be part of the 2010 Desert Research and Technologies Simulations (DRATS). The purpose of this project is to develop, integrate, test, and evaluate a HDU in the context of the mission architectures and surface operation concepts. This HDU is based on the Constellation Architecture Scenario 12.1 concept of a vertically oriented habitat module. A multi-center approach with be utilized to build, integrate, and test the HDU project through a shared collaborative effort of multiple NASA centers. This project is part of the strategic plan from the ESMD Directorate Integration Office (DIO) and the Lunar Surface Systems Project Office (LSSPO) to test surface elements in a surface analog environment which includes two Lunar Electric Rovers and the HDU during the 2010 analog field test. This paper will describe the overall objectives, its various configurations, strategic plan, and technology integration as it pertains to the 2010 and 2011 field analog tests.

Kennedy, Kriss J.↗

Alignment of NASA’s Human System Risks with Technological Capability Gaps to Enable Integrated Research and Technology Development Strategic Planning

BACKGROUND: Radiation, reduced gravity, distance from earth, isolation and confinement, and habitation within artificially created and controlled life support environments are hazards that present risk to human space explorers. NASA’s Human System Risk Board (HSRB) maintains a set of twenty-nine different Human System Risks with subject matter experts from across the agency providing regular updates to the estimated likelihood and consequence associated with each risk. The Human Research Program (HRP) has historically used these risk classifications as a primary basis for identifying and prioritizing human research investments aimed at characterizing and/or mitigating the respective human system risks. In many cases, technology development is required to mature and validate risk mitigation strategies, however, NASA’s primary technology development programs have not typically used Human System Risks as a basis for strategic planning. A primary function of the Environmental Control and Life Support Systems (ECLSS) – Crew Health and Performance (CHP) System Capability Leadership Team (SCLT) is to continually identify, review, and update technological capability gaps and to establish and oversee multiyear strategic roadmaps aimed at guiding NASA’s technology development priorities in these areas. These roadmaps are intended to be agency-wide and independent of any program, directorate, or other organization within NASA. DESCRIPTION: The SCLT and HRP collaborated to establish a set of Human System Capability Gaps, which establish a formal linkage between the capability gaps used to prioritize investments across much of NASA, and the Human System Risks that are primarily used to inform and prioritize human research. This set of twenty-eight gaps was developed by subject matter experts, and each gap mapped to the primary associated Human System Risks. The gaps and risk mapping were then reviewed and approved via the HSRB, thereby formally aligning the research-focused Human System Risks with the technology-focused capability gaps. DISCUSSION: This effort has enabled development of integrated roadmaps and budget coordination with research and technology development activities that are formally linked to agency-recognized capability gaps and Human System Risks. Close and ongoing coordination between the SCLT, HRP, Mars Campaign Office, and the Health & Medical Technical Authority (HMTA) is essential to ensure alignment and prioritization of CHP-related research and technology development to enable NASA’s future exploration missions.

Andrew F J Abercromby↗

Recent Progress in Extreme Environment Durable SiC JFET-R Integrated Circuit Technology

This work updates recent progress made by NASA Glenn Research Center on further advancement of its uniquely durable silicon carbide junction field effect transistor and resistor (SiC JFET-R) integrated circuit (IC) technology since HiTEC 2021. Key fabrication process improvements compared to earlier NASA Glenn IC prototype runs have been ascertained via extensive “back end of line” (BEOL) processing experiments conducted on practice wafers over the past two years. The resulting changes to the BEOL process flow employed in the fabrication of “Generation 12” SiC JFET-R wafers are described. The NASA Glenn SiC JFET-R IC prototype “Generation 12” chipset design realizes significantly higher complexity digital and analog integrated ICs aimed at flexibly implementing a broad variety of mission-enabling extreme-environment electronics demonstrations. SPICE simulations have verified circuit designs ranging from simple amplification of analog sensor signals up through long-duration Venus lander operations and microprocessor-based of electric motor drive.

Silicon Carbide↗

Recent Progress in Extreme Environment Durable SiC JFET-R Integrated Circuit Technology

This work updates recent progress made by NASA Glenn Research Center on further advancement of its uniquely durable silicon carbide junction field effect transistor and resistor (SiC JFET-R) integrated circuit (IC) technology since HiTEC 2021. Key fabrication process improvements compared to earlier NASA Glenn IC prototype runs have been ascertained via extensive “back end of line” (BEOL) processing experiments conducted on practice wafers over the past two years. The resulting changes to the BEOL process flow employed in the fabrication of “Generation 12” SiC JFET-R wafers are described. The NASA Glenn SiC JFET-R IC prototype “Generation 12” chipset design realizes significantly higher complexity digital and analog integrated ICs aimed at flexibly implementing a broad variety of mission-enabling extreme-environment electronics demonstrations. SPICE simulations have verified circuit designs ranging from simple amplification of analog sensor signals up through long-duration Venus lander operations and microprocessor-based of electric motor drive.

Silicon Carbide↗

Recent Progress in Extreme Environment Durable SiC JFET-R Integrated Circuit Technology

This work updates recent progress made by NASA Glenn Research Center on further advancement of its uniquely durable silicon carbide junction field effect transistor and resistor (SiC JFET-R) integrated circuit (IC) technology since HiTEC 2021. Key fabrication process improvements compared to earlier NASA Glenn IC prototype runs have been ascertained via extensive “back end of line” (BEOL) processing experiments conducted on practice wafers over the past two years. The resulting changes to the BEOL process flow employed in the fabrication of “Generation 12” SiC JFET-R wafers are described. The NASA Glenn SiC JFET-R IC prototype “Generation 12” chipset design realizes significantly higher complexity digital and analog integrated ICs aimed at flexibly implementing a broad variety of mission-enabling extreme-environment electronics demonstrations. SPICE simulations have verified circuit designs ranging from simple amplification of analog sensor signals up through long-duration Venus lander operations and microprocessor-based of electric motor drive.

Silicon Carbide↗

The Habitat Demonstration Unit Project Overview

This paper will describe an overview of the National Aeronautics and Space Administration (NASA) led multi-center Habitat Demonstration Unit (HDU) Project. The HDU project is a "technology-pull" project that integrates technologies and innovations from numerous NASA centers. This project will be used to investigate and validate surface architectures, operations concepts, and requirements definition of various habitation concepts. The first habitation configuration this project will build and test is the Pressurized Excursion Module (PEM). This habitat configuration - the PEM - is based on the Constellation Architecture Scenario 12.1 concept of a vertically oriented habitat module. The HDU project will be tested as part of the 2010 Desert Research and Technologies Simulations (D-RATS) test objectives. The purpose of this project is to develop, integrate, test, and evaluate a habitat configuration in the context of the mission architectures and surface operation concepts. A multi-center approach will be leveraged to build, integrate, and test the PEM through a shared collaborative effort of multiple NASA centers. The HDU project is part of the strategic plan from the Exploration Systems Mission Directorate (ESMD) Directorate Integration Office (DIO) and the Lunar Surface Systems Project Office (LSSPO) to test surface elements in a surface analog environment. The 2010 analog field test will include two Lunar Electric Rovers (LER) and the PEM among other surface demonstration elements. This paper will describe the overall objectives, its various habitat configurations, strategic plan, and technology integration as it pertains to the 2010 and 2011 field analog tests. To accomplish the development of the PEM from conception in June 2009 to rollout for operations in July 2010, the HDU project team is using a set of design standards to define the interfaces between the various systems of PEM and to the payloads, such as the Geology Lab, that those systems will support. Scheduled activities such as early fit-checks and the utilization of a habitat avionics test bed prior to equipment installation into PEM are planned to facilitate the integration process.

Kennedy, Kriss J.↗

Ultra-Efficient Engine Technology Project Integrated Into NASA's Vehicle Systems Program

The Ultra-Efficient Engine Technology (UEET) Project is formulated according to the Office of Aerospace Technology's objectives as outlined in the NASA Strategic Plan. It is directly related to the "protect the environment" objective and will make progress toward the "increase mobility" and "support national security" objectives as well. UEET technologies will impact future civil and military aircraft and will benefit the development of future space transportation propulsion systems. UEET Project success will, therefore, depend on developing revolutionary, but affordable, technology solutions that are inherently safe and reliable and thus can be incorporated in future propulsion system designs. In fiscal year 2003, UEET became part of NASA's Vehicle Systems Program and continues to evolve its programmatic role. The Vehicle Systems Program aims to develop breakthrough technologies and methodologies, push the boundaries of flight through research on advanced vehicle concepts, respond quickly to industry and the Department of Defense on critical safety and other issues, and provide facilities and expert consultation for industry and other Government agencies during product development.

Shaw, Robert J.↗