Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tethering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

The use of tethered satellites for the collection of cosmic dust and the sampling of man made orbital debris far from the space station

The use of a tethered subsatellite employed downward into the earth's upper atmosphere to an altitude of about 110 km above the earth would eliminate the orbital contamination problem while at the same time affording a measure of atmospheric braking to reduce the velocities of many particles to where they may be captured intact or nearly so with properly designed collectors. The same technique could also be used to monitor the flux of all types of man-made orbital debris out to a distance of more than a hundred kilometers in any direction from the space station. In this way the build up of any debris belt orbiting earth could be determined. The actual collecting elements used for both purposes could be of several different materials and designs so as to optimize the collection of different types of particles with different densities. Stacks of foils, films, plastics, and foams, as well as simple capture cells would be mounted in clusters around the outside of a tethered satellite and protected by iris covers until the tethered had been fully deployed. If the orientation history of the satellite were known the direction of the incoming material could be infered. A chief advantage in deploying such tethered collectors from the Space Station instead of from the shuttle is the ability to maintain deployment of the tether for days instead of hours resulting in much greater yields of intact particles and impact debris.

Corso, G. J.↗

Development status of first Tethered Satellite System

An MOU between NASA and Italian research organizations has assigned the responsibilities for the development, payload integration, launch and operation of a Tethered Satellite System (TSS). The TSS will include a deployer mounted on a Spacelab pallet, science equipment on a customized mission support structure and a satellite connected to the Orbiter by a tether. The satellite is 1.6 m in diameter and can weight up to 500 kg. The deployer will be insulated from the Orbiter because of the conductive nature of the tether. The first mission is to demonstrate the TSS technology, perform electrodynamic investigations of the interaction of the tether with ambient space plasma, and gather data on atmospheric interactions in the lower thermosphere, geomagnetic phenomena and gravimetric characteristics. The first TSS will be deployed 20 km outward from the Orbiter and the earth on a strand of tin-coated copper wire wrapped in Teflon insulation, braided Kevlar and a Nomek jacket. The first strand is designed to accommodate 53 N tension. The satellite on the end of the tether will be a multimission platform for facile changeout of the scientific package from mission-to-mission.

Sisson, J. M.↗

Tether propulsion

The principle and applications of tethering are examined. Tethering works by momentum transfer; the center of mass of a system consisting of (for example) a Space Shuttle and a tethered payload such as the Advanced X-ray Astrophysical Facility continues to follow the original orbit. Given a slight outward velocity, the payload begins to lag behind because it has the same linear velocity as the Shuttle but is at a greater distance from the earth. Any displacement from the local vertical causes a restoring force at each end tending to restore the system to a vertical orientation. When vertically above the Shuttle, the payload has the same angular velocity but a greater linear velocity; thus momentum is transferred from the Shuttle to the payload. It is computed that a tether 32 nautical miles long could deploy AXAF into a 320-nautical mile orbit from a lower, elliptical Shuttle orbit, thus saving 5000 pounds of Shuttle propellant. Various types of tether are considered: Kevlar and steel, uniform and tapered. Numerous cases appear to be feasible for boost and deboost as well as momentum transfer, using such reaction masses as the Space Station, a lunar orbiter, the Martian moons Phobos and Deimos, various asteroids, and moons of the major planets.

Bekey, I.↗

Guidebook for analysis of tether applications

This guidebook is intended as a tool to facilitate initial analyses of proposed tether applications in space. Topics disscussed include: orbit and orbit transfer equations; orbital perturbations; aerodynamic drag; thermal balance; micrometeoroids; gravity gradient effects; tether control strategies; momentum transfer; orbit transfer by tethered release/rendezvous; impact hazards for tethers; electrodynamic tether principles; and electrodynamic libration control issues.

Carroll, J. A.↗

Electrodynamic tether

Electrodynamic tethers hold promise for a variety of space applications. Electrodynamic tethers depend upon the interactions between a moving insulated conductor and the Earth's magnetic field. An electric field is generated along the tether as in a conductor moving in the magnetic field of a generator. If the circuit is closed to the ambient space plasma via a plasma gun or other equivalent device, a current is enabled to flow in the tether, and electric power is generated at the expense of orbital mechanical energy. The net effect is a decrease in the altitude of the orbiting tethered system. The situation can be reversed by driving current against the electric field via an external power supply such as a photovoltaic array.

Patterson, Michael↗

The radiation impedance of an electrodynamic tether with end connectors

Electrodynamic tethers are wires deployed across the earth's geomagnetic field through which a current is flowing. The radiation impedance of a tether with end connectors carrying an ac current is computed from classical antenna theory. This simulates the use of a tether on a space structure. It is shown that the current flow pattern at the tether connector is critical to determining the overall radiation impedance. If the tether makes direct electrical contact with the ionosphere then radiation impedances of the order of several thousand Ohms can be expected. If the only electrical contact is through the end connectors then the impedance is only a few Ohms for a dc current rising to several tens of Ohms for an ac current with frequencies in the whistler range.

Hastings, Daniel E.↗

Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase 2)

Simulation of two short distance crawling maneuvers of the elevator both with and without environmental perturbations acting upon the system is discussed. These simulation runs were performed in order to provide results useful for the interpretation of the data from the tests, on the ground, of a scaled down engineering model of the elevator. In these simulation runs the elevator crawls along the tether in accordance to the developed mirror image motion control law (MIMCL). Results from the simulation of the 4 km long maneuver run were compared to those obtained by adopting the modified hyperbolic tangent control law (MHTCL). A preprocessor was developed for setting up the initial conditions of a tethered system with L platforms, M longitudinal dampers, and N lumped masses (platforms plus tether beads). A short test run of the 4-platform system with 3 longitudinal dampers and 10 lumper mass without any perturbation acting upon the system is illustrated. In support of the Tether Applications Working Group, SAO is preparing a catalog of tether simulations, has prepared a set of simulator test cases, obtained results from SKYHOOK, and solicited results from simulators at other institutions, and prepared a paper on a specific analytic solution.

Lorenzini, Enrico C.↗

Satellite relocation by tether deployment

Several new uses of satellite tethers are discussed, including: (1) using tether extension to reposition a satellite in orbit without fuel expenditure by extending a mass on the end of a tether; (2) using a tether for energy storage to power the satellite during eclipse; and (3) using a tether for eccentricity pumping to correct perturbations in the orbit and as a means of adding energy to the orbit for boosting and orbital transfer.

Landis, Geoffrey A.↗

Small Expendable-tether Deployer System (SEDS) development status

Plans for proposed flight of the Small Expendable-tether Deployer System (SEDS) on a Delta II launch vehicle are discussed. The SEDS tether concept and mission requirements are outlined. Results are presented from calculations of the tether dynamics and computer modeling to determine tether behavior. The tether's thermal characteristics, electronics system, material, data collection procedure, payload, and orbital trace are described.

Harrison, James K.↗

Plasma motor generator tether system for orbit reboost

This paper describes a comprehensive study of an electrodynamic tether used as a Plasma Motor Generator (PMG). The paper summarizes the work performed in the study and includes: (1) a detailed design of a 2 kW PMG tether system to be used for orbit reboost, (2) the selection of the Orbiting Maneuvering Vehicle (OMV) and the European Retrievable Carrier (EURECA) as the primary candidate spacecraft to host the experimental system, (3) analysis of the integration of the PMG tether system with these two spacecraft, (4) the simulation of the deployment of the tether, and (5) an engineering design and development plan leading to a flight demonstration of this PMG tether.

Hulkower, Neal D.↗

Tethered system/space platform integration - TSS lessons learned

Tethered spacecraft systems must be integrated with their user platforms in a way that allows both to carry out their design functions efficiently and safely. This paper describes the lessons learned about tethered system integration with a space platform from the NASA/PSN Tethered Satellite System. Items discussed include platform attitude control, induced voltage and current control, satellite tracking and tether length measurement, satellite communications and system operations sensitivities. A number of engineering issues yet to be resolved are noted. Tethered systems are complex and require careful design to ensure successful operation.

Rudolph, L. K.↗

An overview of a tether deployment monitoring system

A study was conducted to investigate the feasibility of monitoring the position of a tether during tether deployment. Several major configurations were investigated, including considerations of passive or active optical detection, radar, lidar, and active instrumentation packages. Cost, weight, the impact on tether operational dynamics, and the orbiter integration considerations were studied for each of these methods. Results indicated that implementation of such a monitoring system can be accomplished with little or no impact on tether deployment operations. Design diagrams are presented for two launchers and a tether attitude/tension detector.

Ibanez, P.↗

Acceptance and qualification test results of the 20 km electromechanical tether for TSS-1

Acceptance and qualification tests have been performed on the TSS-1 flight tether and its associated qualification tether. Acceptance testing during production included periodic measurement of conductor resistance, off-line breakstrength tests on strength member samples, continuous measurement of the insulation layer voltage withstand capability, and a continuous mechanical proof-loading procedure during the tether jacketing operation. The qualification test sequence consisted of thermal vacuum, voltage withstand and breakstrength tests on samples taken from the production runs for both the qualification and flight tethers. This paper will analyze the acceptance and qualification test data, respectively. Results indicate that the completed flight tether exceeds the design requirements for the TSS-1 mission.

Marshall, L. S.↗

The tether inspection and repair experiment (TIRE)

The successful development and deployment of reusable tethers for space applications will require methods for detecting, locating, and repairing damage to the tether. This requirement becomes especially important whenever the safety of the STS or the Space Station may be diminished or when critical supplies or systems would be lost in the event of a tether failure. A joint NASA/PSN study endeavor has recently been initiated to evaluate and address the problems to be solved for such an undertaking. The objectives of the Tether Inspection and Repair Experiment (TIRE) are to develop instrumentation and repair technology for specific classes of tethers defined as standards, and to demonstrate the technologies in ground-based and in-flight testing on the STS.

Wood, George M.↗

Shuttle tethered operations: The effect on orbital trajectory and inertial navigation

The first full scale test of a large tethered satellite system is planned. The Orbiter will be linked to a 500 kg payload by a 20 km tether, an action with a profound effect on the trajectory of the Orbiter. For the first time in the history of the Shuttle program, the vehicle will conduct prolonged operations with the center of mass of the orbiting system a significant distance from the center of mass of the Space Shuttle Orbiter, a violation of the fundamental assumption made in both the Orbiter ground-based and onboard navigation software. Inertial navigation of tethered operations with the Shuttle is further complicated by the presence of non-conservative forces in the system: Reaction Control System (RCS) translational effects, atmospheric drag, and electro-magnetic dynamics. These can couple with the conservative tether dynamics effects, and degrade the navigation software performance. The primary effects are examined on the Orbiter's trajectory, coupling by conservative forces during tethered operations, and the impact of both on the ability to meet inertial navigation constraints. The impact of electrodynamics, different RCS control modes, commanded attitudes, and attitude deadbands are presented. Operational guidelines which optimize successful mission navigation, and necessary navigation constraints are discussed.

Lardas, Mark N.↗

Electrodynamics of the Getaway Tether Experiment

An electrodynamic circuit model of the interaction of a pair of small tethered satellites and the ionosphere is developed and analyzed. The system under study, the Getaway Tether Experiment (GATE), is composed of two small satellites and 1 km of insulated conducting tether. The nonlinear model has elements representing the emission, collection, and resistive flow of charge through an electrically conductive tether, plasma contactors, and the ionosphere. The circuit model is incorporated into a dynamic orbital simulation to predict mission performance. Simulation results show the feasibility to bilaterally transfer energy between stored electrical energy and orbital momentum. A transient model is also developed using the circuit model and a string of N lumped-parameter modules, each consisting of resistance, capacitance, and induced potential for the tether. Transients are shown via simulation to occur over millisecond intervals.

Greene, Michael↗

Atmospheric verification mission for the TSS/STARFAC tethered satellite

Two types of a tethered satellite system (TSS) - a basic 1.8-m-diameter spherical spacecraft and the Shuttle Tethered Aerothermodynamic Research Facility (STARFAC) are considered. Issues related to the deployment and retrieval of a large satellite with exceedingly long tethers are discussed, and the objectives of an Atmospheric Verification Mission (ATM) are outlined. Focus is concentrated on the ATM satellite which will fly after TSS-1 and before the fully instrumented and costlier TSS-2. The differences between the AVM and TSS-2, including the configuration of the aerodynamic stabilizers, instrumentation, and the materials of construction are outlined. The basic Kevlar tether defined for the TSS-2 is being considered for use with the AVM, however, a complex tether is under consideration as well.

Wood, George M., Jr.↗

Satellite relocation by tether deployment

Several new uses of satellite tethers are discussed, including: (1) using tether extension to reposition a satellite in orbit without fuel expenditure by extending a mass on the end of a tether; (2) using a tether for energy storage to power the satellite during eclipse; and (3) using a tether for eccentricity pumping to correct perturbations in the orbit and as a means of adding energy to the orbit for boosting and orbital transfer.

Landis, Geoffrey A.↗