Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tidal Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

A preliminary tidal analysis of TOPEX/POSEIDON altimetry

Approximately 12 months of data from the TOPEX/POSEIDON satellite altimeter mission are analyzed for the major short-period oceanic tides. A harmonic analysis is performed on data captured within bins defined on a deep-ocean grid, which, owing to tidal aliasing considerations, must have a relatively coarse spatial resolution. Our analysis is in terms of corrections to the Schwiderski and Cartwright-Ray models, and it confirms many of the Schwiderski differences previously reported by Cartwright and Ray. Our differences with respect to the Geosat-based Cartwright and Ray model form a sectorial pattern in M(sub 2) with high/low differences separated roughly 180 deg in longitude. We suggest that these sectorial errors were most likely induced by Geosat's relatively large orbit error. Comparisons to independent data validate the improved TOPEX/POSEIDON solutions; in-situ 'ground truth' shows M(sub 2) root mean square (RMS) differences of 4.10 cm (Schwiderski), 3.86 cm (cartwright and Ray), 2.63 cm (this paper). Global rates of energy dissipation confirm earlier estimates for M(sub 2), and show improved agreement with satellite tracking studies for K(sub 1) and S(sub 2). These preliminary exercises confirm that TOPEX/POSEIDON should results in a new generation of improved global tidal models.

Schrama, E. J. O.↗
NASA NTRS1982

Orbital evolution of the Galilean satellites

The orbital motions of the Galilean satellites exert dramatic control over their physical properties (most notably Io's) through tidal heating. In turn, tidal dissipation in the satellites, as well as in Jupiter, has governed the evolution of the orbits and, in particular, of the Laplace resonance. If the system started out of the resonance and evolved into it, forced eccentricities would have increased with time. Hence, the tidal melting of Io and the cracking of Europa'a surface may have occurred relatively recently. This theory requires that Jupiter's tidal dissipation factor be greater than about two million, a rather low value (high rate of tidal dissipation) compared with most models of Jovian interior processes. Alternatively, the system may have started even deeper in the resonance than it is today, a scenario which is consistent with larger values of the tidal dissipation factor. This model, with its correspondingly large initial forced eccentricities, would imply (1) that Io melted early and fast, and may have remained molten with only a thin solid skin until the present and (2) that the water mantles of both Europa and Ganymede remained largely molten for considerably longer than Callisto did, but later froze as their eccentricities and tidal heating decreased.

Greenberg, R.↗
NASA NTRS1990

Dynamic sea surface topography, gravity, and improved orbit accuracies from the direct evaluation of Seasat altimeter data

A gravitational model incorporating Seasat altimetry, surface gravimetry, and satellite tracking data has been determined in terms of global spherical harmonics complete to degree and order 50. This model, PGS-3337, uses altimeter data as a dynamic observation of the satellite's height above the sea surface. A solution for the ocean's dynamic topography is recovered simultaneously with the orbit parameters, gravity, and ocean tidal terms. The recovered dynamic topography reveals the global long wavelength circulation of the oceans with a resolution of 2000 km and is very similar to the mean upper ocean dynamic height derived from historical ship observations. The PGS-3337 geoid has an uncertainty of 60 cm rms globally but 25 cm rms over the ocean because of the altimeter measurements. Seasat orbits determined in this solution have an estimated accuracy for the radial position of 20 cm rms. The difference between the altimeter observed sea height and the geoid plus dynamic topography model is 30 cm rms. Contained in these residuals are the sea height variability, as well as errors from the geoid, orbits, tidal models, and altimeter range measurement. This performance level is 2 to 3 times better than that achieved with previous Goddard gravitational models.

Marsh, J. G.↗
NASA NTRS1986

The effects of mantle and anelasticity on nutations, earth tides, and tidal variations in rotation rate

The paper models the effects of mantle anelasticity on luni-solar nutations, on tidal deformation, on tidal variations in rotation rate, and on the eigenfrequency of the free core nutation. The results can be used to invert observations to solve for the anelastic contributions to the shear and bulk moduli of the upper and lower mantle. Specific anelastic models are used to numerically estimate the effects of anelasticity on these geodetic observables. The nutation estimates are compared with observational results. Among the conclusions: (1) mantle anelasticity is likely to be the most important source of damping for the free core nutation; (2) present VLBI nutation results are, in principle, accurate enough to usefully bound anelasticity at diurnal periods. But the discrepancy between the VLBI observed nutations and the 1984 IAU nutation model cannot be explained by anelasticity and is not yet well enough understood to allow anelasticity to be determined from the data.

Wahr, John↗
NASA NTRS1977

Theoretical aspects of tidal and planetary wave propagation at thermospheric heights

A simple semiquantitative model is presented which allows analytic solutions of tidal and planetary wave propagation at thermospheric heights. This model is based on perturbation approximation and mode separation. The effects of viscosity and heat conduction are parameterized by Rayleigh friction and Newtonian cooling. Because of this simplicity, one gains a clear physical insight into basic features of atmospheric wave propagation. In particular, we discuss the meridional structures of pressure and horizontal wind (the solutions of Laplace's equation) and their modification due to dissipative effects at thermospheric heights. Furthermore, we solve the equations governing the height structure of the wave modes and arrive at a very simple asymptotic solution valid in the upper part of the thermosphere. That 'system transfer function' of the thermosphere allows one to estimate immediately the reaction of the thermospheric wave mode parameters such as pressure, temperature, and winds to an external heat source of arbitrary temporal and spatial distribution. Finally, the diffusion effects of the minor constituents due to the global wind circulation are discussed, and some results of numerical calculations are presented.

Volland, H.↗
NASA NTRS1976

Earth tides, volcanos and climatic change

The effect of variations in tidal stresses on the earth caused by the sun and moon on volcanic activity and climate is investigated. A statistically significant correlation is found between the derivatives of the envelopes of peak tidal stresses at high northern latitudes and the mean temperature of the Northern Hemisphere as reflected in oxygen isotope ratios in the Greenland ice cap. It is suggested that variations in tidal stresses cause changes in the amount of stratospheric dust produced by volcanic activity, which affects the thickness of the stratospheric dust veil and the atmospheric radiation balance. For a simple model, periodic variations in tidal stress account for 13% of the variance in the ice-core temperature record.

Roosen, R. G.↗
NASA NTRS1995

On Lateral Viscosity Contrast in the Mantle and the Rheology of Low-Frequency Geodynamics

Mantle-wide heterogeneity is largely controlled by deeply penetrating thermal convective currents. These thermal currents are likely to produce significant lateral variation in rheology, and this can profoundly influence overall material behaviour. How thermally related lateral viscosity variations impact models of glacio-isostatic and tidal deformation is largely unknown. An important step towards model improvement is to quantify, or bound, the actual viscosity variations that characterize the mantle. Simple scaling of viscosity to shear-wave velocity fluctuations yields map-views of long- wavelength viscosity variation. These give a general quantitative description and aid in estimating the depth dependence of rheological heterogeneity throughout the mantle. The upper mantle is probably characterized by two to four orders of magnitude variation (peak-to-peak). Discrepant time-scales for rebounding Holocene shorelines of Hudson Bay and southern Iceland are consistent with this characterization. Results are given in terms of a local average viscosity ratio, (Delta)eta(bar)(sub i), of volumetric concentration, phi(sub i). For the upper mantle deeper than 340 km the following reasonable limits are estimated for (delta)eta(bar) approx. equal 10(exp -2): 0.01 less than or equal to phi less than or equal to 0.15. A spectrum of ratios (Delta)eta(bar)(sub i) less than 0.1 at concentration level eta(sub i) approx. equal 10(exp -6) - 10(exp -1) in the lower mantle implies a spectrum of shorter time-scale deformational response modes for second-degree spherical harmonic deformations of the Earth. Although highly uncertain, this spectrum of spatial variation allows a purely Maxwellian viscoelastic rheology simultaneously to explain all solid tidal dispersion phenomena and long-term rebound-related mantle viscosity. Composite theory of multiphase viscoelastic media is used to demonstrate this effect.

Ivins, Erik R.↗
DOE OSTI2024

Dissipation Scaled Internal Wave Drag in a Global Heterogeneously Coupled Internal/External Mode Total Water Level Model

This study showcases a global, heterogeneously coupled total water level system wherein salinity and temperature outputs from a coarser-resolution (~12 km) ocean general circulation model are used to calculate density-driven terms within a global, higher-resolution (~2.5 km) depth-averaged total water level model. We demonstrate that the inclusion of baroclinic forcing in the barotropic model requires modification of the internal wave drag term to prevent excess degradation of tidal results compared to the barotropic model. By scaling the internal tide dissipation by an easy to calculate dissipation ratio, the resulting heterogeneously coupled model has complex root mean square errors (RMSE) of 2.27 cm in the deep ocean and 12.16 cm in shallow waters for the M 2 tidal constituent. While this represents a 10%–20% deterioration as compared to the barotropic model, the improvements in total water level prediction more than offset this degradation. Global median RMSE compared to observations of total water levels, 30-day sea levels, and non-tidal residuals improve by 1.86 (18.5%), 2.55 (42.5%), and 0.36 (5.3%) cm respectively. The drastic improvement in model performance highlights the importance of including density-driven effects within global hydrodynamic models and will help to improve the results of both hindcasts and forecasts in modeling extreme and nuisance flooding. With only an 11% increase in model run time compared to the fully barotropic total water level model, this approach paves the way for high resolution coastal water level and flood models to be used alongside climate models, improving operational forecasting of total water levels.

Blakely, Coleman Peter [University of Notre Dame, ↗
NASA NTRS2026

Remote Sensing-Driven Hydrodynamic Modeling in Data-Scarce Regions: Integrating ICESat-2, Sentinel-2, SWOT and Re-analysis Models for Coastal Monitoring

Hydrodynamic models in coastal and estuarine systems are typically constrained by sparse bathymetry, boundary, and validation data, especially in regions where field campaigns are costly or impractical. Here we develop and test a fully satellite-driven framework for hydrodynamic modeling in South Africa’s Langebaan Lagoon without using any local in situ measurements. Bathymetry is derived by training multispectral Sentinel-2 reflectance against ICESat-2 ATL24 photon-derived depths using an XGBoost model optimized with Bayesian search. The final satellite-derived bathymetry reproduces independent ATL24 points with RMSE = 0.45 m and R 2 = 0.97. This bathymetry was used in a depth-averaged Delft3D Flexible Mesh model driven at the open boundary by TPXO tidal harmonics and by ERA5 winds. We validate modeled water surface elevation against 16 SWOT low-rate (250 m, unsmoothed) passes in 2023. SWOT–model comparisons yield an overall RMSE of 0.11 m and R 2 = 0.61, with typical point differences <0.10 m (∼7% of the 1.5 m tidal range), and showed consistent spatial gradients in water level from the offshore boundary, through Saldanha Bay, and into the lagoon. At the offshore boundary, TPXO and SWOT sea surface heights agree closely (R 2 = 0.86). A simple phase adjustment of ∼26,min between TPXO and SWOT lowers the RMSE from 0.18,m to 0.11,m, showing that phase offset accounts for some of the discrepancy, with additional errors likely linked to non-tidal signals. Our results demonstrate that combining passive optical, photon-counting LiDAR, radar interferometry, and global tidal/atmospheric models enables robust, transferrable hydrodynamic modeling in data-scarce coastal systems, offering a cost-effective pathway for monitoring.

ICESat-2↗
NASA NTRS2012

Evaluation of Atmospheric Loading and Improved Troposphere Modelling

Forward modeling of non-tidal atmospheric loading displacements at geodetic tracking stations have not routinely been included in Doppler Orbitography and Radiopositionning Integrated by Satellite (DORIS) or Satellite Laser Ranging (SLR) station analyses for either POD applications or reference frame determination. The displacements which are computed from 6-hourly models such as the ECMWF and can amount to 3-10 mm in the east, north and up components depending on the tracking station locations. We evaluate the application of atmospheric loading in a number ways using the NASA GSFC GEODYN software: First we assess the impact on SLR & DORIS-determined orbits such as Jason-2, where we evaluate the impact on the tracking data RMS of fit and how the total orbits are changed with the application of this correction. Preliminary results show an RMS radial change of 0.5 mm for Jason-2 over 54 cycles and a total change in the Z-centering of the orbit of 3 mm peak-to-peak over one year. We also evaluate the effects on other DORIS-satellites such as Cryosat-2, Envisat and the SPOT satellites. In the second step, we produce two SINEX time series based on data from available DORIS satellites and assess the differences in WRMS, scale and Helmert translation parameters. Troposphere refraction is obviously an important correction for radiometric data types such as DORIS. We evaluate recent improvements in DORIS processing at GSFC including the application of the Vienna Mapping Function (VMF1) grids with a-priori hydrostatic (VZHDs) and wet (VZWDs) zenith delays. We reduce the gridded VZHD at the stations height using pressure and temperature derived from GPT (strategy 1) and Saastamoinen. We discuss the validation of the VMF1 implementation and its application to the Jason-2 POD processing, compared to corrections using the Niell mapping function and the GMF. Using one year of data, we also assess the impact of the new troposphere corrections on the DORIS-only solutions, most importantly on the scale of the weekly solutions.

Zelensky, Nikita P.↗
DOE OSTI2024

Generalized Quasi-Static Mooring System Modeling with Analytic Jacobians

This paper presents a generalized and efficient method for quasi-static analysis of mooring systems, including complex scenarios such as when shared mooring lines interconnect multiple floating wind or wave energy devices. While quasi-static mooring models are well established, most published formulations are focused on specific applications, and no publicly available implementations provide efficient handling of large mooring system networks. The present formulation addresses these gaps by: (1) formulating solutions for edge cases not typically supported by quasi-static models; (2) creating a fully generalized model structure such that any combination of mooring lines, point masses, and floating bodies can be assembled; and (3) deriving analytic expressions for the system Jacobians (stiffness matrices) so that systems with many degrees of freedom can be solved efficiently. These techniques form the theory basis of MoorPy, an open-source mooring analysis library. The model is demonstrated on nine scenarios of increasing complexity with features of interest for offshore renewable energy applications. When compared with steady-state results from a lumped-mass dynamic model, the results show that the quasi-static formulation accurately calculates profiles and tensions and that its analytic approach provides more efficient and reliable computation of system stiffness matrices than finite-differencing methods. These results verify the accuracy of the MoorPy model.

16 TIDAL AND WAVE POWER↗
NASA NTRS1978

Tidal frequency estimation for closed basins

A method was developed for determining the fundamental tidal frequencies for closed basins of water, by means of an eigenvalue analysis. The mathematical model employed, was the Laplace tidal equations.

Eades, J. B., Jr.↗
NASA NTRS1976

Water resources planning for rivers draining into mobile bay

A hydrodynamic model describing water movement and tidal elevation is formulated, computed, and used to provide basic data about water quality in natural systems. The hydrodynamic model is based on two-dimensional, unsteady flow equations. The water mass is considered to be reasonably mixed such that integration (averaging) in the depth direction is a valid restriction. Convective acceleration, the Coriolis force, wind and bottom interactions are included as contributing terms in the momentum equations. The solution of the equations is applied to Mobile Bay, and used to investigate the influence that river discharge rate, wind direction and speed, and tidal condition have on water circulation and holdup within the bay. Storm surge conditions, oil spill transport, artificial island construction, dredging, and areas subject to flooding are other topics which could be investigated using the mathematical modeling approach.

Ng, S.↗
NASA NTRS1990

Probing the tides in interacting galaxy pairs

Detailed spectroscopic and imaging observations of colliding elliptical galaxies revealed unmistakable diagnostic signatures of the tidal interactions. It is possible to compare both the distorted luminosity distributions and the disturbed internal rotation profiles with numerical simulations in order to model the strength of the tidal gravitational field acting within a given pair of galaxies. Using the best-fit numerical model, one can then measure directly the mass of a specific interacting binary system. This technique applies to individual pairs and therefore complements the classical methods of measuring the masses of galaxy pairs in well-defined statistical samples. The 'personalized' modeling of galaxy pairs also permits the derivation of each binary's orbit, spatial orientation, and interaction timescale. Similarly, one can probe the tides in less-detailed observations of disturbed galaxies in order to estimate some of the physical parameters for larger samples of interacting galaxy pairs. These parameters are useful inputs to the more universal problems of (1) the galaxy merger rate, (2) the strength and duration of the driving forces behind tidally stimulated phenomena (e.g., starbursts and maybe quasi steller objects), and (3) the identification of long-lived signatures of interaction/merger events.

Borne, Kirk D.↗
NASA NTRS2015

Tidal Friction in the Earth-Moon System and Laplace Planes: Darwin Redux

The dynamical evolution of the Earth-Moon system due to tidal friction is treated here. George H. Darwin used Laplace planes (also called proper planes) in his study of tidal evolution. The Laplace plane approach is adapted here to the formalisms of W.M. Kaula and P. Goldreich. Like Darwin, the approach assumes a three-body problem: Earth, Moon, and Sun, where the Moon and Sun are point-masses. The tidal potential is written in terms of the Laplace plane angles. The resulting secular equations of motion can be easily integrated numerically assuming the Moon is in a circular orbit about the Earth and the Earth is in a circular orbit about the Sun. For Earth-Moon distances greater than ∼10 Earth radii, the Earth's approximate tidal response can be characterized with a single parameter, which is a ratio: a Love number times the sine of a lag angle divided by another such product. For low parameter values it can be shown that Darwin's low-viscosity molten Earth, M. Ross's and G. Schubert's model of an Earth near melting, and Goldreich's equal tidal lag angles must all give similar histories. For higher parameter values, as perhaps has been the case at times with the ocean tides, the Earth's obliquity may have decreased slightly instead of increased once the Moon's orbit evolved further than 50 Earth radii from the Earth, with possible implications for climate. This is contrast to the other tidal friction models mentioned, which have the obliquity always increasing with time. As for the Moon, its orbit is presently tilted to its Laplace plane by 5.2deg. The equations do not allow the Moon to evolve out of its Laplace plane by tidal friction alone, so that if it was originally in its Laplace plane, the tilt arose with the addition of other mechanisms, such as resonance passages.

Darwin Redux↗
NASA NTRS1979

Occultation of Epsilon Geminorum by Mars. III - Temperature structure of the Martian upper atmosphere

High-quality photoelectric observations of the April 8, 1976, occultation of Epsilon Gem by Mars are analyzed which were obtained at five different observatories. Temperature profiles are derived by numerical inversion of the star's light curves and found to be in mutual agreement. This is taken as evidence for the presence of strong atmospheric waves in the Martial upper atmosphere between number densities of 10 to the 13th and 10 to the 15th per cu cm. It is estimated that the vertical wavelength is about 20 km, the horizontal wavelength is greater than 600 km, and the peak-to-peak wave amplitude is approximately 40 K. The results are shown to be qualitatively consistent with Zurek's (1976) model of thermally driven tidal modes. No compelling evidence for turbulence effects is found in the occultation data.

French, R. G.↗