Search NASA⌕ Search

SEARCH · Search NASA

Results for “Torque”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Alterations of the In Vivo Torque-Velocity Relationship of Human Skeletal Muscle Following 30 Days Exposure to Simulated Microgravity

The purpose of this study was to examine the effect of 30 d of 6 deg headdown bedrest (BR) on the in vivo strength of skeletal muscle. Peak angle specific (0.78 rad below horizontal) torque of the knee extensor (KE) and flexor (KF) muscle groups of both limbs was assessed during unilateral efforts at four speeds (0.52, 1.74, 2.97 and 4.19 rad/s) during concentric and at three speeds (0.52, 1.74 and 2.97 rad/s) during eccentric actions. The average decrease (P less than 0.05) of peak angle specific torque directly post-BR for the KE across speeds of concentric and eccentric actions was about 19% (n = 7). Recovery for 30 d following BR markedly improved strength to about 92% (P greater than 0.05) of 'normal'. Strength of the KF was not altered (P greater than 0.05) by BR (about a 6% decrease independent of speed and type of muscle action). Changes of strength were not affected by the type or speed of muscle action. The results indicate that strength of ex-tensor more than of flexor muscle groups of the lower limb is decreased by 30 d of bedrest and that this response does not alter the nature of the in vivo torque-velocity relation.

Dudley, Gary A.↗
NASA NTRS1999

Superconductor-Magnet Bearings With Inherent Stability and Velocity-Independent Drag Torque

A hybrid superconductor magnet bearing system has been developed based on passive magnetic levitation and the flux pinning effect of high-temperature superconductivity. The rationale lies in the unique capability of a high-temperature superconductor (HTS) to enhance system stability passively without power consumption. Characterization experiments have been conducted to understand its dynamic behavior and to estimate the required motor torque for its driving system design. These experiments show that the hybrid HTS-magnet bearing system has a periodic oscillation of drag torque due mainly to the nonuniform magnetic field density of permanent magnets. Furthermore, such a system also suffers from a small superimposed periodic oscillation introduced by the use of multiple HTS disks rather than a uniform annulus of HTS material. The magnitude of drag torque is velocity independent and very small. These results make this bearing system appealing for high-speed application. Finally, design guidelines for superconducting bearing systems are suggested based on these experimental results.

Lee, Eun-Jeong↗
NASA NTRS2003

Transient Torque Method: A Fast and Non-Intrusive Technique to Simultaneously Determine Viscosity and Electrical Conductivity of Semiconducting and Metallic Melts

A transient torque method was developed to rapidly and simultaneously determine the viscosity and electrical conductivity of semiconducting or metallic melts. The experimental setup is similar to that for the oscillation cup technique. The melt sample is sealed inside a fused silica ampoule, and the ampoule is suspended by a long quartz fiber to form a torsional oscillation system. A rotating magnetic field is used to induce a rotating flow in the conductive melt, which causes the ampoule to rotate along its axis. A sensitive angular detector is used to measure the deflection angle of the ampoule. Based on the transient behavior of the deflection angle as the rotating magnetic field is applied, the electrical conductivity and viscosity of the melt can be obtained simultaneously by numerically fitting the data to a set of governing equations. The transient torque viscometer was applied successfully to measure the viscosity and electrical conductivity of high purity mercury at 53.4 C. The results were in excellent agreement with the published data. The main advantage of the technique is that the measurement can be completed in one or two minutes, as opposed to the one or two-hour measurement time required by the oscillation cup technique. The method is non-intrusive; capable of rapid measurement of the viscosity of toxic, high vapor pressure melts at elevated temperatures. In addition, the transient torque viscometer can also be operated as an oscillation cup viscometer if desired.

Li, C.↗
NASA NTRS2004

Minimum-Time and Vibration Avoidance Attitude Maneuver for Spacecraft with Torque and Momentum Limit Constraints in Redundant Reaction Wheel Configuration

In this paper, we present an optimal open-loop slew trajectory algorithm developed at GSFC for the so-called "Yardstick design" of the James Webb Space Telescope (JWST). JWST is an orbiting infrared observatory featuring a lightweight, segmented primary mirror approximately 6 meters in diameter and a sunshield approximately the size of a tennis court. This large, flexible structure will have significant number of lightly damped, dominant flexible modes. With very stringent requirements on pointing accuracy and image quality, it is important that slewing be done within the required time constraint and with minimal induced vibration in order to maximize observing efficiency. With reaction wheels as control actuators, initial wheel speeds as well as individual wheel torque and momentum limits become dominant constraints in slew performance. These constraints must be taken into account when performing slews to ensure that unexpected reaction wheel saturation does not occur, since such saturation leads to control failure in accurately tracking commanded motion and produces high frequency torque components capable of exciting structural modes. A minimum-time constraint is also included and coupled with reaction wheel limit constraints in the optimization to minimize both the effect of the control torque on the flexible body motion and the maneuver time. The optimization is on slew command parameters, such as maximum slew velocity and acceleration, for a given redundant reaction wheel configuration and is based on the dynamic interaction between the spacecraft and reaction wheel motion. Analytical development of the slew algorithm to generate desired slew position, rate, and acceleration profiles to command a feedback/feed forward control system is described. High-fidelity simulation and experimental results are presented to show that the developed slew law achieves the objectives.

Ha, Kong Q.↗
NASA NTRS1995

Code to Optimize Load Sharing of Split-Torque Transmissions Applied to the Comanche Helicopter

Most helicopters now in service have a transmission with a planetary design. Studies have shown that some helicopters would be lighter and more reliable if they had a transmission with a split-torque design instead. However, a split-torque design has never been used by a U.S. helicopter manufacturer because there has been no proven method to ensure equal sharing of the load among the multiple load paths. The Sikorsky/Boeing team has chosen to use a split-torque transmission for the U.S. Army's Comanche helicopter, and Sikorsky Aircraft is designing and manufacturing the transmission. To help reduce the technical risk of fielding this helicopter, NASA and the Army have done the research jointly in cooperation with Sikorsky Aircraft. A theory was developed that equal load sharing could be achieved by proper configuration of the geartrain, and a computer code was completed in-house at the NASA Lewis Research Center to calculate this optimal configuration.

Source record↗
NASA NTRS2005

Preparation Torque Limit for Composites Joined with Mechanical Fasteners

Current design guidelines for determining torque ranges for composites are based on tests and analysis from isotropic materials. Properties of composites are not taken into account. No design criteria based upon a systematic analytical and test analyses is available. This paper is to study the maximum torque load a composite component could carry prior to any failure. Specifically, the torque-tension tests are conducted. NDT techniques including acoustic emission, thermography and photomicroscopy are also utilized to characterize the damage modes.

Thomas, Frank P.↗
NASA NTRS2007

The Effect of Manipulating Subject Mass on Lower Extremity Torque Patterns During Locomotion

During locomotion, humans adapt their motor patterns to maintain coordination despite changing conditions (Reisman et al., 2005). Bernstein (1967) proposed that in addition to the present state of a given joint, other factors, including limb inertia and velocity, must be taken into account to allow proper motion to occur. During locomotion with added mass counterbalanced using vertical suspension to maintain body weight, vertical ground reaction forces (GRF's) increase during walking but decrease during running, suggesting that adaptation may be velocity-specific (De Witt et al., 2006). It is not known, however, how lower extremity joint torques adapt to changes in inertial forces. The purpose of this investigation was to examine the effects of increasing body mass while maintaining body weight upon lower-limb joint torque during walking and running. We hypothesized that adaptations in joint torque patterns would occur with the addition of body mass.

DeWitt, John K.↗
NASA NTRS2011

Space Suit Joint Torque Testing

In 2009 and early 2010, a test was performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design meets the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future space suits. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis and a variance in torque values for some of the tested joints was apparent. Potential variables that could have affected the data were identified and re-testing was conducted in an attempt to eliminate these variables. The results of the retest will be used to determine if further testing and modification is necessary before the method can be validated.

Valish, Dana J.↗
NASA NTRS2012

Space Suit Joint Torque Measurement Method Validation

In 2009 and early 2010, a test method was developed and performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits. This was done in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design met the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future development programs. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis; the results indicated a significant variance in values reported for a subset of the re-tested joints. Potential variables that could have affected the data were identified and a third round of testing was conducted in an attempt to eliminate and/or quantify the effects of these variables. The results of the third test effort will be used to determine whether or not the proposed joint torque methodology can be applied to future space suit development contracts.

Valish, Dana↗
NASA NTRS2012

4U 1626-67 as Seen by Suzaku Before and After the 2008 Torque Reversal

Aims. The accretion-powered pulsar 4U 1626-67 experienced a new torque reversal at the beginning of 2008, after about 18 years of steadily spinning down. The main goal of the present work is to study this recent torque reversal that occurred in 2008 February. Methods. We present a spectral analysis of this source using two pointed observations performed by Suzaku in 2006 March and in 2010 September. Results. We confirm with Suzaku the presence of a strong emission-line complex centered on 1 keV, with the strongest line being the hydrogen-like Ne Lya at 1.025(3) keV. We were able to resolve this complex with up to seven emission lines. A dramatic increase of the intensity of the Ne Lya line after the 2008 torque reversal occurred, with the equivalent width of this line reaching almost the same value measured by ASCA in 1993. We also report on the detection of a cyclotron line feature centered at approximately 37 keV. In spite of the fact that an increase of the X-ray luminosity (0.5-100keV) of a factor of approximately 2.8 occurred between these two observations, no significant change in the energy of the cyclotron line feature was observed. However, the intensity of the approximately 1 keV line complex increased by an overall factor of approximately 8. Conclusions. Our results favor a scenario in which the neutron star in 4U 1626-67 accretes material from a geometrically thin disk during both the spin-up and spin-down phases.

Camero-Arranz, A.↗
NASA NTRS2010

Mechanics of Re-Torquing in Bolted Flange Connections

It has been widely accepted that the phenomenon of time-dependent loosening of flange connections is a strong consequence of the viscous nature of the compression seal material. Characterizing the coupled interaction between gasket creep and elastic bolt stiffness has been useful in predicting conditions that facilitate leakage. Prior advances on this sub-class of bolted joints has lead to the development of (1) constitutive models for elastomerics, (2) initial tightening strategies, (3) etc. The effect of re-torque, which is a major consideration for typical bolted flange seals used on the Space Shuttle fleet, has not been fully characterized, however. The current study presents a systematic approach to characterizing bolted joint behavior as the consequence of sequentially applied torques. Based on exprimenta1 and numerical results, the optimal re-torquing parameters have been identified that allow for the negligible load loss after pre-load application

Gordon, Ali P.↗
NASA NTRS2013

Integrated High-Speed Torque Control System for a Robotic Joint

A control system for achieving high-speed torque for a joint of a robot includes a printed circuit board assembly (PCBA) having a collocated joint processor and high-speed communication bus. The PCBA may also include a power inverter module (PIM) and local sensor conditioning electronics (SCE) for processing sensor data from one or more motor position sensors. Torque control of a motor of the joint is provided via the PCBA as a high-speed torque loop. Each joint processor may be embedded within or collocated with the robotic joint being controlled. Collocation of the joint processor, PIM, and high-speed bus may increase noise immunity of the control system, and the localized processing of sensor data from the joint motor at the joint level may minimize bus cabling to and from each control node. The joint processor may include a field programmable gate array (FPGA).

Davis, Donald R.↗
NASA NTRS2014

Torque Tension Testing of Fasteners used for NASA Flight Hardware Applications

The effect of various lubricants and other compounds on fastener torque-tension relationships is evaluated. Testing was performed using a unique test apparatus developed by Posey at the NASA Goddard Space Flight Center. A description of the test methodology, including associated data collection and analysis will be presented. Test results for 300 series CRES and A286 heat resistant fasteners, torqued into various types of inserts will be presented. The primary objective of this testing was to obtain torque-tension data for use on NASA flight projects.

Hemminger, Ed↗
NASA NTRS2016

RFID Torque Sensing Tag System for Fasteners

The present invention provides an RFID-based torque sensor that can be used to quickly monitor off the shelf fasteners including fasteners that are used in expensive satellites or other uses where fastener failure can be very costly. In one embodiment, an antenna, RFID ring and spring comprise a sensor tag that can be interrogated with an interrogation signal produced by an interrogator device. When sufficient torque is applied to the fastener, an RFID circuit is connected, and produces a radio frequency (RF) signal that can be read by the interrogator. In one embodiment, the RFID circuit does not transmit when the spring member is not compressed, thereby indicating insufficient tensioning of the fastener. The present invention offers the ability to remotely, quickly, and inexpensively verify that any number of fasteners are torqued properly upon initial installation. Where applicable, the present invention allows low cost monitoring over the life of the fastener.

Fink, Patrick W.↗
NASA NTRS2019

Ion Thruster Produced Roll Torque

Disturbances to the ion engine’s thrust vector will cause a spacecraft to spin about its axis if left unmanaged. Spin about the yaw and pitch axis can be easily handled by a gimbal with enough authority. Spin about the roll axis however must be handled by additional thrusters or reaction wheels. In order to capitalize on the high efficiency of their thrusters, missions utilizing electric propulsion as primary propulsion generally include long periods of thrusting (several years). It is necessary to quantify and understand the ion thruster produced roll torque because it will define the amount of chemical propellant that must be carried or the lifetime and quantity of momentum wheels required for the mission. The roll torque produced by the NEXT ion thruster is analyzed through a combination of theoretical calculations and magnetic field simulations. Experimental techniques for measuring roll torque and past flight data are also discussed.

Arthur, Neil A.↗
NASA NTRS2019

Ion Thruster Produced Roll Torque

Disturbances to the ion engine's thrust vector will cause a spacecraft to spin about its axis if left unmanaged. Spin about the yaw and pitch axis can be easily handled by a gimbal with enough authority. Spin about the roll axis however must be handled by additional thrusters or reaction wheels. In order to capitalize on the high efficiency of their thrusters, missions utilizing electric propulsion as primary propulsion generally include long periods of thrusting (several years). It is necessary to quantify and understand the ion thruster produced roll torque because it will define the amount of chemical propellant that must be carried or the lifetime and quantity of momentum wheels required for the mission. The roll torque produced by the NEXT ion thruster is analyzed through a combination of theoretical calculations and magnetic field simulations. Experimental techniques for measuring roll torque and past flight data are also discussed.

Arthur, Neil A.↗
NASA NTRS2020

Ion Thruster Produced Roll Torque

Disturbances to the ion engine’s thrust vector will cause a spacecraft to spin about its axis if left unmanaged. Spin about the yaw and pitch axes can be easily handled by a gimbal with enough authority. Spin about the roll axis, however, must be handled by additional thrusters or reaction wheels. In order to capitalize on the high efficiency of their thrusters, missions utilizing electric propulsion as primary propulsion generally include long periods of thrusting (several years). It is necessary to quantify and understand the ion thruster produced roll torque because it will define the amount of chemical propellant that must be carried or the lifetime and quantity of momentum wheels required for the mission. The roll torque produced by the NASA’s Evolutionary Xenon Thruster (NEXT) ion thruster is analyzed through a combination of theoretical calculations and magnetic field simulations. Experimental techniques for measuring roll torque and past flight data are also discussed.

Neil A Arthur↗
NASA NTRS2022

Bearing Starting Torque Measurements Down to –100°C

Starting torque was measured for three different bearings from 0°C down to 90°C and 100°C. These are bearings of the type that will be used in the ice-penetrating radar instrument named Radar for Europa Assessment and Sounding: Ocean to Near-surface (REASON), which is part of the planned science instrument suite for the National Aeronautics and Space Administration (NASA) Europa Clipper mission. This space science mission to Jupiter’s moon, Europa, is being led by NASA’s Jet Propulsion Laboratory (JPL), which is administered for NASA by the California Institute of Technology (Caltech). In addition to presenting the starting torque measurements at various temperatures, this paper will describe the small test chamber and attachments that allowed the measurements to be made using an existing bearing torque testing machine.

Tao, Frank↗