Search NASA⌕ Search

SEARCH · Search NASA

Results for “UC Berkeley”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

The final WaZP galaxy cluster catalog of the Dark Energy Survey and comparison with SZE data

In this work, we present and characterize the galaxy cluster catalog detected by the WaZP cluster finder, which is not based on red-sequence identification, on the full six years of observations of the Dark Energy Survey (DES-Y6). The full catalog contains over 400k detected clusters with richnesses, Ngals, above 5 and that reach redshifts up to 1.3. We also provide a version of the catalog where the observation depth and richness computation are homogenized to be used for cosmology, containing 33k rich (Ngals >25) clusters. We compare our results with the previous WaZP catalog obtained from the DES first-year data release (DES-Y1). We find that essentially all clusters within the common footprint and depth limit are recovered. The deeper observations on DES-Y6 and the more complete available spectroscopic redshift sample lead to improvements in the redshifts of the clusters, resulting in an average scatter of 1.4% and offset of 0.2%. The optical clusters are also cross-matched with Sunyaev Zel'dovich Effect (SZE) cluster samples detected by the South Pole Telescope (SPT) and the Atacama Cosmology Telescope (ACT). We find that essentially all SZE clusters with reasonable overlapping footprint have a corresponding WaZP cluster. Conversely, 90% of the optical detections with richness greater than 150 have a counterpart in the deeper regions of the SZE surveys. Based on cross-match with the SZE catalogs, we also find that 15-20% of the SZE matched systems have more than one possible WaZP counterpart at the same redshift and within the SZE R500c, indicating possible interacting or unrelaxed systems. Finally, given the optical and SZE beams, WaZP and SZE centerings are found to be consistent. A more detailed study of the SZE-WaZP mass-richness relation will be presented in a separate paper.

Benoist, C. [OCA, Nice, Lab. Lagrange; LIneA, Rio ↗

Results of an irrigated lands assessment for water management in California

Periodic assessment of existing and future demands for water within California is one responsibility of the California Department of Water Resources (CDWR). The California Irrigated Lands Assessment for Water Management Project represented a 5-year joint research effort between the NASA and the CDWR with technical support from the University of California (UC) at Berkeley and at Santa Barbara. The objectives were: (1) to develop and demonstrate procedures for providing highly precise, timely, estimates of irrigated area on a statewide basis using Landsat sensor data, and (2) to develop, through research with small demonstration sites, a procedure for the inventory and mapping of crop groups on a regional basis. Both manual and computer-assisted analyses were investigated. This paper highlights the statewide irrigated lands inventory where a procedure for statewide estimation of irrigated land using full frame Landsat MSS imagery and sampled ground data was successfully demonstrated. The statewide estimate of 3 990 112 hectares was within + or - 1.32 percent relative standard error at the 95-percent Confidence Interval, well within the design goal. This procedure represents a new capability for obtaining near-real time data on changes in agricultural water use throughout the state.

Bauer, E. H.↗

Radio Frequency Plasma Synthesis of Boron Nitride Nanotubes (BNNTs) for Structural Applications

Boron nitride nanotubes (BNNTs) are more thermally and chemically compatible with metal- and ceramic-matrix composites than carbon nanotubes (CNTs). The lack of an abundant supply of defect-free, high-aspect-ratio BNNTs has hindered development as reinforcing agents in structural materials. Recent activities at the National Research Council - Canada (NRC-C) and the University of California - Berkeley (UC-B) have resulted in bulk synthesis of few-walled, small diameter BNNTs. Both processes employ induction plasma technology to create boron vapor and highly reactive nitrogen species at temperatures in excess of 8000 K. Subsequent recombination under controlled cooling conditions results in the formation of BNNTs at a rate of 20 g/hr and 35 g/hr, respectively. The end product tends to consist of tangled masses of fibril-, sheet-, and cotton candy-like materials, which accumulate within the processing equipment. The radio frequency plasma spray (RFPS) facility at NASA Langley (LaRC), developed for metallic materials deposition, has been re-tooled for in-situ synthesis of BNNTs. The NRC-C and UC-B facilities comprise a 60 kW RF torch, a reactor with a stove pipe geometry, and a filtration system. In contrast, the LaRC facility has a 100 kW torch mounted atop an expansive reaction chamber coupled with a cyclone separator. The intent is to take advantage of both the extra power and the equipment configuration to simultaneously produce and gather BNNTs in a macroscopic form amenable to structural material applications.

Hales, Stephen J.↗

Mu2e Tracker Electronics - Construction of a Straw Tracker

The Mu2e experiment, currently under construction at the Fermi National Accelerator Laboratory (FNAL) in Batavia, Illinois, is a particle physics experiment designed to detect Charged Lepton Flavor Violation (CLFV) via muon-to-electron conversion, a process beyond the Standard Model (BSM). One of the primary Mu2e detectors is the Straw Tracker, whose purpose is to measure the momentum of the electron, identify the signal, and reject background. The straw tubes are being read out by a total of 20,736 preamplifiers (preamps) within 36 planes that make up the Tracker. In this presentation, the installation of electronics into the Tracker, the implementation of anti-oscillation copper clips, and the process of installing fully constructed planes into the frame will be discussed in depth.

Lynch, Alec [UC, Berkeley]↗

A First Demonstration of the SQUAT Detector Architecture: Direct Measurement of Resonator-Free Charge-Sensitive Transmons

The Superconducting Quasiparticle-Amplifying Transmon (SQUAT) is a new sensor architecture for THz (meV) detection based on a weakly charge-sensitive transmon directly coupled to a transmission line. In such devices, energy depositions break Cooper pairs in the qubit capacitor islands, generating quasiparticles. Quasiparticles that tunnel across the Josephson junction change the transmon qubit parity, generating a measurable signal. In this paper, we present the design of first-generation SQUATs and demonstrate an architecture validation. We summarize initial characterization measurements made with prototype devices, comment on background sources that influence the observed parity-switching rate, and present experimental results showing simultaneous detection of charge and quasiparticle signals using aluminum-based SQUATs.

Magoon, H. [SLAC; KIPAC, Menlo Park; Stanford U., ↗

Cosmological constraints from the Planck cluster catalogue with DES shear profiles and Chandra observations

We present cosmological constraints from the Planck PSZ2 cosmological cluster sample, using weak-lensing shear profiles from Dark Energy Survey (DES) data and X-ray observations from the Chandra telescope for the mass calibration. We compute hydrostatic mass estimates for all clusters in the PSZ2 sample with a scaling relation between their Sunyaev-Zeldovich signal and X-ray derived hydrostatic mass, calibrated with the Chandra data. We introduce a method to correct these masses with a hydrostatic mass bias using shear profiles from wide-field galaxy surveys. We simultaneously fit the number counts of the PSZ2 sample and the mass calibration with the DES data, finding $Ω_\text{m}=0.312^{+0.018}_{-0.024}$, $σ_8=0.777\pm 0.024$, $S_8\equiv σ_8 \sqrt{Ω_\text{m} / 0.3}=0.791^{+0.023}_{-0.021}$, and $(1-b)=0.844^{+0.055}_{-0.062}$ for our baseline analysis when combined with BAO data. When considering a hydrostatic mass bias evolving with mass, we find $Ω_\text{m}=0.353^{+0.025}_{-0.031}$, $σ_8=0.751\pm 0.023$, and $S_8=0.814^{+0.019}_{-0.020}$. We verify the robustness of our results by exploring a variety of analysis settings, with a particular focus on the definition of the halo centre used for the extraction of shear profiles. We compare our results with a number of other analyses, in particular two recent analyses of cluster samples obtained from SPT and eROSITA data that share the same mass calibration data set. We find that our results are in overall agreement with most late-time probes, in very mild tension with CMB results (1.6$σ$), and in significant tension with results from eROSITA clusters (2.9$σ$). We confirm that our mass calibration is consistent with the eROSITA analysis by comparing masses for clusters present in both Planck and eROSITA samples, eliminating it as a potential cause of tension.

Aymerich, G. [Orsay, IAS; AIM, Saclay] (ORCID:0009↗

An Image-Plane Approach to Gravitational Lens Modeling of Interferometric Data

Strong gravitational lensing acts as a cosmic telescope, enabling the study of the high-redshift universe. Astronomical interferometers, such as the Atacama Large Millimeter/submillimeter Array (ALMA), have provided high-resolution images of strongly lensed sources at millimeter and submillimeter wavelengths. To model the mass and light distributions of lensing and source galaxies from strongly lensed images, strong lens modeling for interferometric observations is conventionally performed in the visibility space, which is computationally expensive. In this paper, we implement an image-plane lens modeling methodology for interferometric dirty images by accounting for noise correlations. We show that the image-plane likelihood function produces accurate model values when tested on simulated ALMA observations with an ensemble of noise realizations. We also apply our technique to ALMA observations of two sources selected from the South Pole Telescope survey, comparing our results with previous visibility-based models. Our model results are consistent with previous models for both parametric and pixelated source-plane reconstructions. We implement this methodology for interferometric lens modeling in the open-source software package lenstronomy.

Zhang, Nan [Illinois U., Urbana (main)] (ORCID:000↗

Mu2e Tracker Electronics - Construction of a Straw Tracker

The Mu2e experiment, located at the Fermi National Accelerator Laboratory (FNAL), also known as Fermilab, in Batavia, Illinois, is an in-progress particle physics experiment aiming to detect Charged Lepton Flavor Violation (CLFV) via the $\mu^-Al\rightarrow e^-Al$ interaction, a Beyond the Standard Model (BSM) process. One of the sections of the Mu2e experiment is the Tracker, which aims to identify the signal and reject the background while the experiment is running. A total of 20,736 Calibration (CAL) and High-Voltage (HV) preamplifiers (preamps) are being installed within 36 planes that make up the Tracker. During this process, MHz oscillations were discovered on the CAL preamps, obscuring desired signal detection in the \~kHz range. To solve this issue, copper clips are installed onto the CALs to remove the MHz oscillations. The installation of electronics into the Tracker will be discussed in depth.

Lynch, Alec Michael [UC, Berkeley; Fermilab]↗

A Chemodynamical Census of the Milky Way's Ultra-Faint Compact Satellites. I. A First Population-Level Look at the Internal Kinematics and Metallicities of 19 Extremely-Low-Mass Halo Stellar Systems

Deep, wide-area photometric surveys have uncovered a population of compact ($r_{1/2} \approx$ 1-15 pc), extremely-low-mass ($M_* \approx$ 20-4000 $M_{\odot}$) stellar systems in the Milky Way halo that are smaller in size than known ultra-faint dwarf galaxies (UFDs) and substantially fainter than most classical globular clusters (GCs). Very little is known about the nature and origins of this population of "Ultra-Faint Compact Satellites" (UFCSs) owing to a dearth of spectroscopic measurements. Here, we present the first spectroscopic census of these compact systems based on Magellan/IMACS and Keck/DEIMOS observations of 19 individual UFCSs, representing $\sim$2/3 of the known population. We securely measure mean radial velocities for all 19 systems, velocity dispersions for 15 (predominantly upper limits), metallicities for 17, metallicity dispersions for 8, and $\textit{Gaia}$-based mean proper motions for 18. This large new spectroscopic sample provides the first insights into population-level trends for these extreme satellites. We demonstrate that: (1) the UFCSs are kinematically colder, on average, than the UFDs, disfavoring very dense dark matter halos in most cases, (2) the UFCS population is chemically diverse, spanning a factor of $\sim$300 in mean iron abundance ($\rm -3.3 \lesssim [Fe/H] \lesssim -0.8$), with multiple systems falling beneath the "metallicity floor" proposed for GCs, and (3) while some higher-metallicity and/or younger UFCSs are clearly star clusters, the dynamical and/or chemical evidence allows the possibility that up to $\sim$50% of the UFCSs in our sample (9 of 19) may represent the smallest and least-massive galaxies yet discovered.

Cerny, William [Yale U.] (ORCID:0000000316977062)↗

A Single-Board Fermilab Timing Pipeline on the Xilinx KR260: Decode, Timestamp, Publish, Mirror

Full-width abstract \renewcommand{\maketitlehookd}{% \begin{abstract} \noindent Fermilab's accelerator timing links broadcast short event codes to thousands of devices at once, but the links themselves carry no absolute notion of time; that comes separately from a White Rabbit reference. This work builds the piece that ties the two together on a single board. On a Xilinx Kria KR260 (Zynq UltraScale+), the programmable logic decodes a real Fermilab TCLK link, stamps every event with an absolute White-Rabbit \{sec, ns\} UTC time, and reads the timestamped stream out over AXI4-Lite; a thin Linux process on the same die publishes each event into a Redis stream on the control network. To exercise the full chain on one board, the decoded events are re-encoded as gigabit ACLK, transmitted out an SFP+ optical port, looped back over a short fiber jumper, and decoded again on the same timeline, and are additionally mirrored as an ACLK-Lite Manchester waveform for benchtop probing. Across sustained, multi-day testing against real Fermilab TCLK, the pipeline has decoded, timestamped, and published hundreds of millions of events with practically zero loss, and folding the timestamped stream on the 60-second accelerator supercycle recovers the machine's periodic structure directly from the published data.

Rossel, Jacob [UC, Berkeley; Fermilab] (ORCID:0009↗

Atmospheric Modeling and Denoising for Millimeter-Wave Line Intensity Mapping

Line-intensity mapping (LIM) offers a promising approach to mapping large-scale cosmic structure, and the greatest obstacle for ground-based observations at millimeter wavelengths is foreground contamination from atmospheric emission. In this work, we present a simulation and denoising framework designed to isolate and subtract atmospheric fluctuations from LIM data, modeled after the instrument parameters of the South Pole Telescope Summertime Line Intensity Mapper (SPT-SLIM). We generate mock observations spanning 125-175 GHz containing cosmic signals, precipitable water vapor screens, ice crystal fluctuations, and photon noise. We then implement a spatial-spectral atmospheric removal pipeline combining per-pixel linear template regression with a two-dimensional Fourier-domain filter. The framework is evaluated under simulated conditions in the South Pole and the Atacama Desert across three key metrics: cosmic signal preservation, foreground subtraction efficiency, and instrument noise injection. Our pipeline achieves atmospheric suppression at large spatial scales, and these results establish a physically grounded foundation for atmosphere removal in ground-based LIM data collection.

Saye, L. K. [UC, Berkeley (main)] (ORCID:000900078↗

The Linear Point Standard Ruler with DESI DR1 and DR2 Data

The linear point, a purely geometric feature in the monopole of the two-point correlation function, has been proposed as an alternative standard ruler. Compared to the peak in the correlation function, it is more robust to late-time nonlinear effects at the percent level. In light of improved simulations and high quality data, we revisit the robustness of the linear point and use it as an alternative to template-based fitting approaches typically used in BAO analyses. We present the linear point measurements on galaxy samples from the first and second data releases (DR1 and DR2) of the DESI survey. We convert the linear point into a dimensionless parameter $α_{iso,LP}$, defined as the ratio of the linear point in the fiducial cosmology and the observed value, analogous to the isotropic BAO scaling parameter $α_{iso}$ used in previous BAO measurements. Using the 2nd generation of AbacusSummit mock catalogs, we find that linear point measurements are more precise when calculated in the post-reconstruction regime with 15-60% smaller uncertainties than those pre-reconstruction. We find a systematic shift in the linear point measurements compared against the isotropic BAO measurements in mocks; we attribute this to the isotropic damping parameter responsible for smearing the linear point in the nonlinear regime. We propose a sample-dependent correction that mitigates the impact of late-time nonlinear effects. While this introduces a cosmology dependence in an otherwise model-independent measurement, this is necessary given the sub-percent precision dictated by current cosmological surveys. Comparing $α_{iso,LP}$ with isotropic BAO measurements made on the DESI DR1 and DR2 galaxy samples, we find excellent agreement after applying this correction, particularly post-reconstruction. We discuss future scope regarding cosmological inference with linear point measurements.

Uberoi, N. [Yale U.] (ORCID:0000000275179629)↗

Quasars Acting as Strong Lenses Found in DESI DR1

Quasars acting as strong gravitational lenses offer a rare opportunity to probe the redshift evolution of scaling relations between supermassive black holes and their host galaxies, particularly the M$_{BH}$–M$_{host}$ relation. Using these powerful probes, the mass of the host galaxy can be precisely inferred from the Einstein radius θ$_{E}$. Using 812,118 quasars from DESI DR1 (0.03 ≤ z ≤ 1.8), we searched for quasars lensing higher-redshift galaxies by identifying background emission-line features in their spectra. To detect these rare systems, we trained a convolutional neural network (CNN) on mock lenses constructed from real DESI spectra of quasars and emission-line galaxies (ELGs), achieving a high classification performance (AUC = 0.99). We also trained a regression network to estimate the redshift of the background ELG. Applying this pipeline, we identified seven high-quality (Grade A) lens candidates, each exhibiting a strong [O II] doublet at a higher redshift than the foreground quasar; four candidates additionally show Hβ, [O III] λ4959, and [O III] λ5007 emission. These results significantly expand the sample of quasar lens candidates beyond the 12 identified and 3 confirmed in previous work and demonstrate the potential for scalable, data-driven discovery of quasars as strong lenses in upcoming spectroscopic surveys.

McArthur, Everett [Stanford U., Phys. Dept.; KIPAC↗

Reconstructing Quasar Spectra and Measuring the Lyα Forest with SpenderQ

Quasar spectra carry the imprint of foreground intergalactic medium (IGM) through absorption features. In particular, absorption caused by neutral hydrogen gas, the "Lyα forest," is a key spectroscopic tracer for cosmological analyses used to measure cosmic expansion and test physics beyond the standard model. Despite their importance, current methods for measuring Lyα absorption cannot directly derive the intrinsic quasar continuum and make strong assumptions on its shape, thus distorting the measured Lyα clustering. We present SpenderQ , a ML-based approach for directly reconstructing the intrinsic quasar spectra and measuring the Lyα forest from observations. SpenderQ uses the Spender spectrum autoencoder to learn a compact and redshift-invariant latent encoding of quasar spectra, combined with an iterative procedure to identify and mask absorption regions. To demonstrate its performance, we apply SpenderQ to 400,000 synthetic quasar spectra created to validate the Dark Energy Spectroscopic Instrument Year 1 Lyα cosmological analyses. SpenderQ accurately reconstructs the true intrinsic quasar spectra, including the broad Lyβ, Lyα, SiIV, CIV, and CIII emission lines. Redward of Lyα, SpenderQ provides percent-level reconstructions of the true quasar spectra. Blueward of Lyα, SpenderQ reconstructs the true spectra to < 5%. SpenderQ reproduces the shapes of individual quasar spectra more robustly than the current state-of-the-art. We, thus, expect it will significantly reduce biases in Lyα clustering measurements and enable studies of quasars and their physical properties. SpenderQ also provides informative latent variable encodings that can be used to, e.g., classify quasars with Broad Absorption Lines. Overall, SpenderQ provides a new data-driven approach for unbiased Lyα forest measurements in cosmological, quasar, and IGM studies.

Hahn, ChangHoon [Arizona U., Astron. Dept. - Stewa↗

Low-Energy Radon Backgrounds from Electrode Grids in Dual-Phase Xenon TPCs

The dual-phase xenon time projection chamber (TPC) is a powerful technology to detect rare interactions such as scatters of dark matter particles on nuclei. In particular, the built-in gain of ionization signals in a dual-phase TPC makes it sensitive to events in the few-electron regime, as expected from low-mass dark matter interactions. The pursuit of this low-energy sensitivity through ionization-only signal detection has so far been hindered by excessive electron backgrounds observed across experiments. Much of this background is attributed to the plate-out of $^{222}$Rn decay chain isotopes on the high voltage electrode grid surfaces that span the full cross section of the TPC. This work presents a first-principle model constructed for this background, the predictions of which are consistent with data from the LZ and LUX experiments. We then discuss mitigation strategies of this background in future dual-phase TPCs and the possibility of applying this grid background model to ionization-only dark matter searches.

Akerib, D. S. [SLAC; KIPAC, Menlo Park]↗

Unveiling Hidden Lyman Alpha Emitters in the DESI DR1 Data

We present an automatic method based on machine-learning convolutional neural network (CNN) architecture to detect Lyman alpha emitters (LAE) hidden in the Data Release 1 spectroscopic dataset of the Dark Energy Spectroscopic Instrument (DESI). Those LAEs mostly have incorrect redshift estimations because the current DESI pipeline is not designed to detect and measure the redshifts of galaxies at $z>2$. To uncover those sources, we first visually inspect thousands of DESI spectra and construct a sample, consisting of both LAEs and non-LAEs, for training and testing the CNN-based model to (1) detect LAEs in DESI spectra and (2) determine their Ly$α$ redshifts. The final model yields $95.2\%$ purity and $95.9\%$ completeness for detecting LAEs. We apply this model to approximately $2\times10^{6}$ spectra of sources targeted as emission-line galaxies and detect 19,685 LAEs from $z\sim2$ to $3.5$ within 12 minutes with a single GPU, illustrating the high efficiency of this model for identifying LAEs. The detected LAEs are mostly at the bright end of the luminosity function with Ly$α$ luminosity $L_{\rm Lyα} \gtrsim 10^{43}$ erg/s. The high signal-to-noise composite spectrum of the detected LAEs further shows various spectral features, including P-Cygni profiles of metal lines and MgII emission lines, possible indicators of Lyman continuum escape fraction, revealing the rich astrophysical information in this LAE sample. Finally, this sample can be used to train and validate the pipelines for redshift determination of LAEs for the preparation of the DESI-II survey.

Chan, Jui-Kuan [Taiwan, Natl. Taiwan U.] (ORCID:00↗

Brightest Cluster Galaxy ellipticity as proxy for halo shape: Orientation bias, assembly bias, and potential selection effects in SZ-selected clusters

The orientation of triaxial galaxy clusters with respect to the line-of-sight is expected to be one of the prime sources of scatter and potential bias in optical observables (e.g., richness and weak-lensing signal) of galaxy clusters. In this work, we use the observed shape of the central Brightest Cluster Galaxy (BCG) as proxy for the orientation along the line-of-sight for clusters selected via the Sunyaev-Zel'dovich (SZ) effect from the South Pole Telescope (SPT) and Atacama Cosmology Telescope (ACT) surveys, matched to optically selected clusters from the Dark Energy Survey Year 3 (DES). We construct two samples of clusters that are designed to be identical in SZ mass estimate and redshift but with the roundest vs. the most elliptical BCGs, which we expect to correspond to BCGs (and clusters) with major axes aligned along the line-of-sight vs. in the plane of the sky, respectively. We find that the optical richness of round-BCG clusters is $\sim 10$% larger than that of elliptical-BCG clusters, in agreement with the expectation from projection effects and presenting the first such detection in data. The density profiles, however, are not in agreement with the expectation from projection effects: the 1-halo term (below $6~h^{-1}\rm{Mpc}$) of both the weak-lensing and galaxy density profiles are the same for the subsamples, contrary to previous studies based on X-ray selected clusters. In the 2-halo regime (above $6~h^{-1}\rm{Mpc}$), we find a significant excess of the elliptical-BCG cluster profiles compared to the round-BCG cluster profiles, which is the opposite of the expectation from numerical simulations. We hypothesize that the intrinsic shape of the BCG reflects not just the orientation angle, but also intrinsic properties of the cluster which can affect both the SZ signal and the amplitude of the 2-halo term.

Srinivasan, Radhakrishnan [SUNY, Stony Brook] (ORC↗