Search NASA⌕ Search

SEARCH · Search NASA

Results for “University Programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

An investigation of air transportation technology at the Massachusetts Institute of Technology, 1992-1993

An investigation of air transportation technology at MIT during 1992 - 1993 is presented. One completed project and two continuing research activities are under the sponsorship of the FAA/NASA Joint University Program. The completed project was on tracking aircraft around a turn with wind effects. Active research projects are on ASLOTS - an interactive adaptive system of automated approach spacing of aircraft and alerting in automated and datalink capable cockpits.

Simpson, Robert W.↗

An investigation of air transportation technology at the Massachusetts Institute of Technology: 1993-1994

There are two completed projects and two continuing research activities under the sponsorship of the FAA/NASA Joint University Program as the 1993-94 period ends. There were a number of publications during the year which are referenced in this report. A brief summary of the continuing research projects is provided. The completed projects were (1) Analysis of Aircraft Surface Motion at Boston Logan International Airport and (2) A State of the Art Review and Critical Analysis of World Jet Transport Safety and Aviation Fire Safety. The active research projects are (1) ASLOTS - An Interactive Adaptive System for Automated Approach Spacing of Aircraft and (2) Alerting in Automated and Datalink Capable Cockpits.

Simpson, Robert W.↗

Global Change Research Related in the Earth's Energy and Hydrologic Cycle

The mission of the Global Change Research Related to the Earth's Energy and Hydrologic Cycle is to enhance the scientific knowledge and educational benefits obtained from NASA's Earth Science Enterprise and the U.S. Global Change Research Program, University of Alabama in Huntsville (UAH). This paper presents the final technical report on this collaborative effort. Various appendices include: A) Staff Travel Activities years one through three; B) Publications and Presentations years one through three; C) Education Activities; D) Students year one through three; E) Seminars year one through three; and F) Center for Applied Optics Projects.

Berry, Linda R.↗

High-Altitude Air Mass Zero Calibration of Solar Cells

Air mass zero calibration of solar cells has been carried out for several years by NASA Glenn Research Center using a Lear-25 aircraft and Langley plots. The calibration flights are carried out during early fall and late winter when the tropopause is at the lowest altitude. Measurements are made starting at about 50,000 feet and continue down to the tropopause. A joint NASA/Wayne State University program called Suntracker is underway to explore the use of weather balloon and communication technologies to characterize solar cells at elevations up to about 100 kft. The balloon flights are low-cost and can be carried out any time of the year. AMO solar cell characterization employing the mountaintop, aircraft and balloon methods are reviewed. Results of cell characterization with the Suntracker are reported and compared with the NASA Glenn Research Center aircraft method.

Woodyard, James R.↗

Progress with On-The-Fly Neutron Doppler Broadening in MCNP

The University of Michigan, ANL, and LANL have been collaborating on a US-DOE-NE University Programs project 'Implementation of On-the-Fly Doppler Broadening in MCNP5 for Multiphysics Simulation of Nuclear Reactors.' This talk describes the project and provides results from the initial implementation of On-The-Fly Doppler broadening (OTF) in MCNP and testing. The OTF methodology involves high precision fitting of Doppler broadened cross-sections over a wide temperature range (the target for reactor calculations is 250-3200K). The temperature dependent fits are then used within MCNP during the neutron transport, for OTF broadening based on cell temperatures. It is straightforward to extend this capability to cover any temperature range of interest, allowing the Monte Carlo simulation to account for a continuous distribution of temperature ranges throughout the problem geometry.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Radiography of Dry Cask Storage for Used Nuclear Fuel

Since the U.S. currently only approves of storing used nuclear fuel in pools or dry casks, the demand for dry cask storage is on the rise due to the continuous operation of currently existing nuclear plants which are reaching or have reached the capacity of their used fuel pools. With the rising demand comes additional pressure to ensure the integrity of dry cask systems. Visual inspection is costly and man-power intensive, so alternative nondestructive testing techniques are desired to insure the continued safe and effective storage of fuel. Several approaches being investigated by the University of Florida and the larger multi-university Department of Energy (DOE) Nuclear Energy University Program (NEUP) Integrated Research Project (IRP) are gamma or neutron radiography, both transmission based and interior source emission. Additionally muon radiography is discussed. This work leverages the well-established techniques in medical image reconstruction and applies them to a significantly larger scale with additional considerations due to the dense nuclear materials which serves as effective shields for radiation. Emission source radiography relies on the radiation that is emitted from the used fuel. The main advantage of this technique is the passive nature of the measurement. The fuel is already emitting radiation and only detectors are needed. Transmission radiography uses an external source of radiation to penetrate the side of the cask. Challenges include selecting the external source spectrum to avoid overlap with the spectrum emitted from the fuel, and ensuring the radiation dose limits do not exceed those mandated by the Nuclear Regulatory Commission (NRC). Benefits of this technique include better understanding of the source location allowing for clear image reconstruction, and isolation of the signal from surrounding radiation sources. Muon radiography takes advantage of the natural background flux coming from the interaction of the atmosphere with cosmic radiation. The technique is particularly effective at interrogating large dense objects as the highly energetic muons have smaller cross sections than most typical sources and energies used in nuclear engineering. The various techniques are discussed individually then the conclusion compares them. Finally, future work is identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Innovative Approach to SCC Inspection and Evaluation of Canister in Dry Storage

This final report is summarized four years of work of awarded project number DE-NE0008442\IRP-15-9318, title as: “Innovative Approach to SCC Inspection and Evaluation of Canister in Dry” supported by Nuclear Energy University Program\Integrated Research Program, NEUP\IRP, where last year is an extension of no cost project. This research work is focused on the possible degradation of dry storage canister holding used nuclear fuel (UNF), due to exposure of marine atmospheric environment. The canister usually designed from a welded austenitic stainless-steel of types 304 or 316, encased in a concrete shell known as an overpack. This canister designed and licensed for 20 years with an extension period need to be determined, in addition 20 years or more. These casks are located throughout the country in Independent Spent Fuel Storage Installations (IFSFIs) often on the site close to nuclear power plants, that are often located in coastal or lake-side regions where a marine atmospheric salt air environment exist. As a result of several recent decisions, such as not pursuing Yucca Mountain as a long-term geologic repository storage facility for UNF and the cancellation of the construction of a reprocessing facility in the 1980s due to proliferation risks, interim dry storage facilities for long-term storage are vital option for the immediate future of nuclear energy technology. One of the primary concerns with respect to the long-term performance of the storage casks is the potential for corrosion initiation due to deliquescence of salts deposited on the canister surface as aerosols; in regions of high residual weld stresses, this may lead to localized stress corrosion cracking (SCC). Dust and aerosols in the air being drawn though ventilation openings in the overpacks of passively ventilated dry canister storage systems may be deposited on the stainless-steel canister outer surfaces. Under these conditions, localized corrosion attack can occur. Chlorides ions deliquescence on the canister surface, a process by which the salts essentially pull moisture out of the air, creating a concentrated salt brine on the canister surface. Chloride-induced stress corrosion cracking (CISCC) of welded zones is of special concern, as it a well-documented mode of attack for austenitic stainless steels marine environments, and many independent spent fuel storage installations (ISFSIs) are located in coastal areas. Recent canister inspections have shown that chloride salts are present on the surface of in-service canisters at near-marine settings. However, canister surface inspections of satisfactory resolution to detect SCC have never been carried out in details, because access to the canister surfaces through vents in the overpacks is extremely limited, and high radiation fields make removal of the canisters from the overpacks undesirable. Although no significant corrosion damage has not been detected up to date, there is concern that this may lead to pitting corrosion, which could in turn develop into stress corrosion cracking, causing canister structural failure. The initiation and propagation of pitting corrosion has been widely studied in full immersion conditions, but limited studies have been done on marine atmospheric conditions, which is a focus of this work, these includes laboratory and field experimentally and propagation rate modeling of pitting and transition to crack, and crack propagation rate. It is known, however, that the rate of atmospheric corrosion can be affected by variations in relative humidity (RH), salt density, salt type, droplet area, temperature and stainless-steel microstructure and residual stress particularly in welded zones of canisters. The integrated research program has identified potential deterioration mechanisms for the stainless-steel canisters containing the UNF in dry storage that require detailed research and investigation and will have an impact on the performance of long-term interim storage under the normal and extreme environmental conditions experienced during the duration of this storage. The prediction and monitoring of canister corrosion processes while in storage can provide important data for the assessment of interim storage performance and the safety to the public. This report comprises of mainly the published results in different journals and covering a wide range spectrum from susceptible stainless-steel types 304\316 microstructural analysis through the implant test at atmospheric environment, residual stress analysis of mockup canister and simulation, inspection methodology includes nonlinear ultrasound and vibro-thermography and stochastic modeling and simulation of pits propagation rates and transition to cracks. Description of field specimens installed at ISFSI of Main Yankee is given in the following chapters and will be analyzed in the coming future and serves as an important data for a stochastic analysis as it was drawn from the publications and reports described in this report. The purpose of this report is to bring together the project efforts that includes improving in our understanding of structural aging performance at current dry storage casks fleet at ISFSIs in the context of remedial maintenance and inspection applications technologies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of Calcite Impurities in Bentonite Buffer Systems on Uranium(VI) Solution Speciation and Sorption Behavior

In many nuclear waste disposal scenarios, bentonite is the proposed buffer material surrounding nuclear waste containers. Its main mineralogical component, Na-montmorillonite clay, is expected to limit radionuclide mobility to slow diffusion processes due to the clay’s low porosity and permeability, and the high sorption affinity of clay surface complexation and cation exchange sites for many radionuclides. Given its mineral structure, montmorillonite provides two types of porosities that can be accessible to radioactive contaminants: macropores between clay particles and interlayer spaces within clay particles, which become dominant at increasing degrees of bentonite compaction. Despite the fact that bentonite naturally contains a variety of mineral impurities (e.g., quartz, feldspars and calcite), most previous studies have only focused on radionuclide interactions with pure Na-montmorillonite phases. Hence, in this study, we will investigate the influence of calcite impurities on uranium(VI) (U(VI)) solution speciation and sorption behavior in bentonite systems. In the presence of water, calcite impurities are expected to lead to milli-molar concentrations of dissolved calcium over a wide range of pH conditions. Consequently, Ca 2+ could – at least partially – replace Na + on clay cation exchange sites, with further implications for exchange reactions of cationic U(VI) species. In addition, ternary U(VI)-Ca-carbonate solution species (CaUO 2 (CO 3 ) 3 2- and Ca 2 UO 2 (CO 3 ) 3 ) will largely replace U(VI)-carbonate species (UO 2 (CO 3 ) 3 4- and UO 2 (CO 3 ) 2 2- ) at alkaline pH. These larger, but lower-charged U(VI) species, may show different sorption and diffusion characteristics, e.g. if their access to negatively-charged clay interlayer spaces is different from binary U(VI)-carbonate complexes. In this presentation, we will first demonstrate the impacts of calcite impurities on U(VI) solution speciation based on PHREEQC simulations. We will then discuss first results from U(VI) sorption studies in these systems. This research is being performed using funding received from the DOE Office of Nuclear Energy's Nuclear Energy University Program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Insights and Trends from a Literature Assessment of the Thorium Fuel Cycle

The thorium fuel cycle is often perceived to have limited experience, thereby imposing a barrier to its implementation. Thorium fuel cycles do not have the degree of commercial-scale experience associated with the uranium fuel cycle (especially the use of uranium oxide in a once-through configuration in light- or heavy-water reactors); however the abundance of major research campaigns - and the test and demonstration reactor operations that capped these campaigns - illustrate that significant knowledge concerning the use of thorium is available. Part of the reason for thorium's perceived immaturity is that the information is scattered among a multitude of sources and has not previously been consolidated and evaluated on a comprehensive scale. In recognition of this challenge, Vanderbilt University (VU) and Oak Ridge National Laboratory (ORNL) included a thorium fuel cycle literature assessment task as part of their Nuclear Energy University Programs (NEUP) project. The first phase of this literature assessment culminated in a comprehensive report. This paper describes the highlights of the initial version of this literature report, including item quantification, trends by category, and implications. This preliminary literature assessment has identified that a wealth of documented experience with thorium fuel cycles exists, across many varieties and specific technology options. Though a significant share of the literature is comprised of systems studies and/or proposed work, there is also a substantial knowledge base from experimentation and demonstration with thorium fuel cycle technologies. It is intended that this initial literature report serve as a starting point for continued discussions and consolidation of thorium fuel cycle literature. There are likely still records of work from the 1950's to the 1970's (and even more recently) which could be significant but were not adequately catalogued or are not readily available to a broad audience; hopefully, the ongoing discussions that have been spurred by the present work will stimulate making these documents available. The authors strongly encourage those with knowledge of additional data sources to share them with the interested community. Furthermore, the 21. century is experiencing a resurgence in thorium fuel cycle work that continues to develop the knowledge base. Thus, it would be beneficial to produce updated accounts of this thorium literature summary in future years. Ultimately, the items identified during the course of this literature assessment, along with additional items that continue to be identified, will be housed in an information repository. This will take the form of a relational database, with specific functionality to be determined based on user interest. This format is intended to enable future users to quickly find specific topics or sources as well as assess how much information is available about a particular topic. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Atmospheric Science Program at the University of Louisville (Final Technical Report)

We have completed a 3-year project to enhance the atmospheric science program at the University of Louisville, KY (est. 2008). The goals were to complete an undergraduate atmospheric science laboratory (Year 1) and to hire and support an assistant professor (Years 2 and 3). Both these goals were met on schedule, and slightly under budget.

54 ENVIRONMENTAL SCIENCES↗

Sandia National Laboratories Early Career University Faculty Mentoring Program in International Safeguards

An international safeguards mentoring program was established by Sandia National Laboratories (SNL) for early career university faculty. The inaugural year of the program focused on course material development and connecting faculty to experts at national laboratories. Two faculty members were selected for participation; one developed a safeguards-by-design course, and the other created lecture material related to unmanned robotic systems in safeguards for integration in existing courses. Faculty members were paired with SNL subject matter experts based on the topic of their individual projects. The program also included a two week visit to SNL. The structure of this program not only supported the development of new course material, but also provided junior faculty members with an opportunity to make connections and build collaborations in the field of international safeguards. Programs like this are important for professional development of faculty members and to help strengthen connections between universities and the national laboratories.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

NASA's new university engineering space research programs

The objective of a newly emerging element of NASA's university engineering programs is to provide a more autonomous element that will enhance and broaden the capabilities in academia, enabling them to participate more effectively in the U.S. civil space program. The programs utilize technical monitors at NASA centers to foster collaborative arrangements, exchange of personnel, and the sharing of facilities between NASA and the universities. The elements include: the university advanced space design program, which funds advanced systems study courses at the senior and graduate levels; the university space engineering research program that supports cross-disciplinary research centers; the outreach flight experiments program that offers engineering research opportunities to universities; and the planned university investigator's research program to provide grants to individuals with outstanding credentials.

Sadin, Stanley R.↗

Ethics Education in University Aviation Management Programs in the US: The Need - Part 1

This three-part study examines how four-year universities in the United States with baccalaureate programs in aviation management include ethics instruction in their curricula. Based on a literature review, no research exists to describe the current status of teaching ethics to aviation students. Yet concurrently, unethical activities reported in the media involving the aviation industry indicates the need for such programs. Part One of this study justifies the need for ethics education and develops a series of hypotheses to evaluate the current status of ethics instruction, which was investigated and will be reported on in Parts Two and Three of this study, respectively.

Oderman, Dale B.↗

Sandia National Laboratories Early Career University Faculty Mentoring Program in International Safeguards

Recent years have seen a significantly increased focus in the areas of knowledge retention and mentoring of junior staff within the U.S. national laboratory complex. In order to involve the university community in this process, as well, an international safeguards mentoring program was established by Sandia National Laboratories (SNL) for early career university faculty. After a successful experience during 2019, the program continued into 2020 to include two new faculty members who were paired with SNL subject matter experts based on the topic of their individual projects: one to work on advanced laboratory work for physics, technology, and policy of nuclear safeguards and nonproliferation, and the other to look at machine learning applied to international safeguards and nonproliferation. There is a two-pronged purpose to the program: fostering the development of educational resources available for international safeguards and exploring new research topics stemming from the exchange of mentor and mentee. Further, the program as a whole allows for junior faculty members to establish and expand a relationship network within international safeguards. In addition, programs such as this build stronger connections between the academic and the national laboratory community. Thanks to the junior faculty members that now have new connections into the laboratory community and potential for collaboration projects with the laboratories in the future, safeguards knowledge can actually increase far beyond just individually engaging students using this new and efficient avenue.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

A joint university-government technical editing program

The NASA Langley Research Center (LaRC) and Old Dominion University have designed a mutually useful technical editing program. A university team made up of an English instructor and two graduate students - one from English, one from engineering - works with a senior editor from LaRC to prepare technical reports for publication. A round-robin technique gives the university team editorial commentary from both language and technical specialists; the senior editor from LaRC supervises reports through final publication. To date, the system has provided LaRC with a respectable product and university students with valuable on-the-job training.

Stohrer, Freda F.↗

NASA LeRC/Akron University Graduate Cooperative Fellowship Program and Graduate Student Researchers Program

On June 1, 1980, the University of Akron and the NASA Lewis Research Center (LERC) established a Graduate Cooperative Fellowship Program in the specialized areas of Engine Structural Analysis and Dynamics, Computational Mechanics, Mechanics of Composite Materials, and Structural Optimization, in order to promote and develop requisite technologies in these areas of engine technology. The objectives of this program are consistent with those of the NASA Engine Structure Program in which graduate students of the University of Akron participate by conducting research at Lewis. This report is the second on this grant and summarizes the second and third year research effort, which includes the participation of five graduate students where each student selects one of the above areas as his special field of interest. Each student is required to spend 30 percent of his educational training time at the NASA Lewis Research Center and the balance at the University of Akron. His course work is judiciously selected and tailored to prepare him for research work in his field of interest. A research topic is selected for each student while in residence at the NASA Lewis Research Center, which is also approved by the faculty of the University of Akron as his thesis topic for a Master's and/or a Ph.D. degree.

Fertis, D. G.↗

University Turbine Systems Research Program

The primary areas of university research were combustion, aerodynamics/heat transfer, and materials, with a few projects in the area of instrumentation, sensors and life (ISL).

42 ENGINEERING↗