Search NASA⌕ Search

SEARCH · Search NASA

Results for “V&V”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Launching to the Moon and Beyond: Ares I and V Updates

This slide presentation reviews the progress made on the Ares I and Ares V launch vehicles. Slides reviewing NASA's Mission, timetable and the Launch Vehicle comparisons between the shuttle and the Saturn V vehicles and the Ares I and V launch vehicles are shown. The elements of the Ares I is reviewed in detail with a slide showing Ares I Lunar mission profile. The Ares I-X test flight is reviewed. The Ares V elements are reviewed in a slide and the Ares V lunar profile is also shown. The progress made in this project is reviewed. Charts diagramming the production facilities at the Michoud Assembly Facility, and the manufacturing flow are displayed.

Davis, Daniel J.↗
NASA NTRS2008

Ares V: Supporting Space Exploration from LEO to Beyond

This slide presentation reviews the development of the Ares V launch vehicle. The Ares V is designed as a heavy lift vehicle to send cargo only or in combination with the Ares I will send crews to the moon. The Ares V vehicle design is evolving and will make the authority to proceed milestone in 2011. The key milestones are given with the first mission flight in Fall of 2018. The Design Reference Mission (DRM) for the Ares V is reviewed, including a table with the events from liftoff through LSAM/CEV separation, in time and altitude. The Ares V will deliver 6 times more mass to orbit than currently launch vehicles can.

Sumrall, Phil↗
NASA NTRS2011

Innovative Comparison of Transient Ignition Temperature at the Booster Interface, New Stainless Steel Pyrovalve Primer Chamber Assembly "V" (PCA) Design Versus the Current Aluminum "Y" PCA Design

An assessment of four spacecraft pyrovalve anomalies that occurred during ground testing was conducted by the NASA Engineering & Safety Center (NESC) in 2008. In all four cases, a common aluminum (Al) primer chamber assembly (PCA) was used with dual NASA Standard Initiators (NSIs) and the nearly simultaneous (separated by less than 80 microseconds) firing of both initiators failed to ignite the booster charge. The results of the assessment and associated test program were reported in AIAA Paper AIAA-2008-4798, NESC Independent Assessment of Pyrovalve Ground Test Anomalies. As a result of the four Al PCA anomalies, and the test results and findings of the NESC assessment, the Mars Science Laboratory (MSL) project team decided to make changes to the PCA. The material for the PCA body was changed from aluminum (Al) to stainless steel (SS) to avoid melting, distortion, and potential leakage of the NSI flow passages when the device functioned. The flow passages, which were interconnected in a Y-shaped configuration (Y-PCA) in the original design, were changed to a V-shaped configuration (V-PCA). The V-shape was used to more efficiently transfer energy from the NSIs to the booster. Development and qualification testing of the new design clearly demonstrated faster booster ignition times compared to the legacy AL Y-PCA design. However, the final NESC assessment report recommended that the SS V-PCA be experimentally characterized and quantitatively compared to the Al Y-PCA design. This data was deemed important for properly evaluating the design options for future NASA projects. This test program has successfully quantified the improvement of the SS V-PCA over the Al Y-PCA. A phase B of the project was also conducted and evaluated the effect of firing command skew and enlargement of flame channels to further assist spacecraft applications.

Saulsberry, Regor L.↗
NASA NTRS2012

Status of the Correlation Process of the V-HAB Simulation with Ground Tests and ISS Telemetry Data

The Virtual Habitat (V-HAB) is a dynamic Life Support System (LSS) simulation, created to investigate future human spaceflight missions. V-HAB provides the capability to optimize LSS during early design phases. Furthermore, it allows simulation of worst case scenarios which cannot be tested in reality. In a nutshell, the tool allows the testing of LSS robustness by means of computer simulations. V-HAB is a modular simulation consisting of a: 1. Closed Environment Module 2. Crew Module 3. Biological Module 4. Physio-Chemical Module The focus of the paper will be the correlation and validation of V-HAB against ground test and flight data. The ECLSS technologies (CDRA, CCAA, OGA, etc.) are correlated one by one against available ground test data, which is briefly described in this paper. The technology models in V-HAB are merged to simulate the ISS ECLSS. This simulation is correlated against telemetry data from the ISS, including the water recovery system and the air revitalization system. Finally, an analysis of the results is included in this paper.

Ploetner, Peter↗
NASA NTRS2017

Developing V-Xanes Oxybarometry for Probing Materials Formed in Reducing Environments in the Early Solar Disk

Vanadium exhibits four oxidation states (V(sup 2+), V(sup 3+), V(sup 4+) and V(sup 5+)) that have been shown to preferentially partition between melt phases dependent on redox conditions, spanning oxygen fugacity across more than 10 log units. We are developing synchrotron-based x-ray absorption spectroscopy of low-fugacity standards for the determination of V oxidation state in highly reducing conditions relevant to the early solar nebula.

Butterworth, A. L.↗
NASA NTRSDate not supplied

Calibration of a V-Cone for Low Mass Flows For Small Core Compressor Research

Advancements in core compressor technologies are necessary for next generation, high Overall Pressure Ratio (OPR) turbofan engines. High pressure compressors (HPCs) for future engines are being designed with exit corrected mass flow rates less than 2.25 kg/s (5 lbm/s). In order to accurately measure the performance of these advanced designs, high accuracy measurements are needed in test facilities. The W7 High Speed Multistage Axial Compressor Facility at NASA Glenn Research Center has been used to acquire data for advanced compressor designs. This facility utilizes an advanced differential pressure flow meter called a V-Cone. The facility has historically tested components with physical mass flow rates in the range of 27 to 45 kg/s (60 to 100 lbm/s). As such, when the V-Cone was calibrated prior to installation, the calibrations focused on higher mass flow rates, and uncertainties in that regime range from 0.5% to 0.85%. However, for low mass flow rates under 9 kg/s (20 lbm/s), expected in tests of advanced high OPR HPCs rear stages, the uncertainties of the V-Cone exceed 2.5%. To address this, using a method similar to that utilized by the National Institute of Standards and Technology, an array of Critical Flow Venturi Nozzles (CFVs) was installed in the W7 test section and used to calibrate the V-Cone in 0.5 kg/s (1 lbm/s) increments up to 10.5 kg/s (23 lbm/s). This effort details the measurements and uncertainties associated with this calibration which resulted in a final uncertainty of the V-Cone measurements under 1%.

Measurement Uncertainty↗
NASA NTRS2019

Refining Lucy Mission Delta-V During Spacecraft Design Using Trajectory Optimization Within High-Fidelity Monte Carlo Maneuver Analysis

Recent advances linking medium-fidelity trajectory optimization and high-fidelity trajectory propagation/maneuver design software with Monte Carlo maneuver analysis and parallel processing enabled realistic statistical delta-V estimation well before launch. Completing this high-confidence, refined statistical maneuver analysis early enabled release of excess delta-V margin for increased dry mass margin for the Lucy Jupiter Trojan flyby mission. By 3.3 years before launch, 16 of 34 TCMs had 1000 re-optimized trajectory design samples, yielding tens of m/s lower 99%-probability delta-V versus targeting maneuvers to one optimal trajectory. One year later, 1000 re-optimized samples of all deterministic maneuvers and subsequent flybys further lowered estimated delta-V.

Trojan↗
NASA NTRS1973

Precise measurement of charged defects in III-V compounds (supplement 2)

Experimental methods and related theory which will permit the measurement of low concentrations of vacancies and other defects in III-V compound semiconductors are discussed. Once the nature of these defects has been determined, this information can be incorporated into a transport theory for devices constructed from these materials, and experiments conducted to test the theory. The vacancies and other defects in the III-V compounds are detected by measurement of the nuclear magnetic resonance (NMR) line width. Most of the III-V compounds have at least one isotope with a nuclear quadrupole moment. In a crystal with a cubic crystal field (characteristic of most III-V compounds) there is no quadrupole splitting of the Zeeman resonance line. However, a defect removes the cubic symmetry locally and causes splitting which result in a change of the NMR width. This change can be used to detect the presence of vacancies.

Soest, J. F.↗
NASA NTRS1975

A corrugated horn antenna using V-shape corrugations

Corrugated horns use corrugations on the E-plane walls that are operating in the cutoff condition. In this paper, attention is focused on replacing the rectangular shaped corrugation with a V-shaped corrugation. The properties of the V corrugations are obtained using an integral equation solution; the results of the computational studies indicate that for operation of the V corrugations in the forbidden zone the depth of the corrugations lie between 0.3125 to 0.625 times the wavelength in contrast to the rectangular corrugations where the corresponding depth is 0.25 to 0.5 times the wavelength. The radiation patterns and impedance of two identical rectangular horns with corrugated E-plane walls using either V or rectangular corrugations are directly compared.

Mentzer, C. A.↗
NASA NTRS1979

Round-Trip Missions to Low-Delta-V Asteroids and Implications for Material Retrieval

Low-delta-V asteroids are to be found among those which have perihelia near 1 AU. From the 50 known asteroids with perihelia less than 1.5 AU, 10 candidates for asteroid retrieval missions were selected on the basis of low eccentricity and inclination. To estimate the ranges of orbital elements for which capture in earth orbit may be feasible, a survey was made of 180 deg transfer from a set of orbits having elements near those of the earth to the earth. For 2 of the 10 low-delta-V asteroids and for an additional one with elements more earth-like than any yet known, direct ballistic round trips in the 1980's were computed. A stay time of several months at the asteroid was used. The results show that the total delta V, including that for rendezvous with earth upon return, for the known asteroids is above 14 km/sec. But if asteroids are found similar to the strawman considered, the total delta V could be as low as 10 km/sec.

David F Bender↗
NASA NTRS1980

Effects of thermal annealing on the deep-level defects and I-V characteristics of 200 keV proton irradiated AlGaAs-GaAs solar cells

Detailed characterization of deep-level defects and analysis of dark I-V data in 200 keV proton irradiated AlGaAs-GaAs solar cells have been carried out for several proton fluences (5 x 10 to the 11th, 10 to the 12th, and 10 to the 13th P/sq cm), using DLTS, C-V, and I-V measurement techniques. To study the effect of low temperature thermal annealing on the deep-level defect properties, these irradiated samples were annealed in vacuum at 300 C for one hour. Comparison was then made on the measured defect parameters (i.e., defect energy levels and densities) and the dark I-V characteristics for both the annealed and unannealed samples.

Li, S. S.↗
NASA NTRS1981

Method of making V-MOS field effect transistors utilizing a two-step anisotropic etching and ion implantation

A method of making V-MOS field effect transistors is disclosed wherein a masking layer is first formed over a surface of a crystalline substrate. An aperture is then formed in the masking layer to expose the surface of the substrate. An anisotropic etchant is applied to the exposed surface so that a groove having a decreasing width within increasing depth is formed. However, the etch is not allowed to go to completion with the result that a partially formed V-shaped groove is formed. Ions are accelerated through the aperture for implantation in the crystalline substrate in the lower portion of the partially formed V-shaped groove. Thereafter, an anisotropic etchant is reapplied to the partially formed V-shaped groove, and the etch is allowed to go to completion.

Jhabvala, M. D.↗
NASA NTRS1979

IUE ultraviolet spectra of V Sagittae

Ultraviolet spectra obtained by the IUE of the short-period, intrinsically variable, double-lined spectroscopic and eclipsing close binary V Sagittae are discussed. The 18 spectra measured between 1150 and 1950 A and 1850 and 3300 A over an interval of 179 days are shown to be dominated by emission features, with only Lyman alpha absorption apparent. Examination of the smooth continuum inferred for each spectrum results in a B-V color index of 0.20. The observed V magnitudes do not show a phase-locked or typical eclipsing light curve, due to intrinsic variability in the UV as well as the visible. The calibrated, reddening-corrected UV fluxes are used in an attempt to determine system temperature, but it is found that the continuum is most likely composite and variable, and thus a unique temperature assignment is impossible. The V Sge system is interpreted as possibly consisting of a primary early A, near-main-sequence star with an effective temperature of 10,000 K and a secondary thick, hot disk (temperature 17,000-300,000 K) embedding a white dwarf.

Koch, R. H.↗
NASA NTRS1981

Solar observations and atomic data for the 3s2 1s0-3s3p 3P1 transition in S v

High resolution solar observations of the S v intersystem line at 1199.18 A are available from Skylab. This line is potentially useful as a density diagnostic for high density plasmas expected in solar flares. S v lines are also prominent in solar spectra at wavelengths below 1000 A. Collision strengths and radiative decay rates are calculated for levels of the configurations 3 s2, 3s3p, 3p2, and 3s3d. Level populations for the five lowest energy levels have been calculated as a function of electron density. These calculations are carried out assuming the temperature at which S v is most abundant in solar plasmas. The calculated population of the 3s3p 3P1 level reaches a pseudo-Boltzmann equilibrium at a density which is about five times higher than is derived from solar spectra and previous density determinations. It is believed that the discrepancy is due to a significant contribution from resonances to the 3s2-3s3p 3P excitation rate coefficient. It is suggested that the contribution of the resonances to the S v excitation rate coefficient can be estimated from a comparison of the experimental results and the theoretical calculations.

Feldman, U.↗
NASA NTRS1982

STRAP V - Higher accuracy, lower drift attitude control system

The STRAP V system was developed to provide higher accuracy and lower limit cycle fine pointing (+ or - 7 arcseconds) in all three axes at targets which cannot be tracked by startrackers or solar trackers. The system provides an increase in pointing performance over that obtainable with the STRAP IV (1) Attitude Control System (ACS). The STRAP IV concept of third axis updates is utilized to reduce pointing errors, using the flight-proven STRAP III (2) system as a first stage. Flight aspect photographs and telemetry records show that the STRAP V objectives have been met. The STRAP IV major error contributors have been significantly reduced and the tracking flexibility has been increased with only minor error contributions. Attention is given to the basic STRAP III control modes, major STRAP IV system error sources, tuned restrained inertial gyros (TRIGs), the programmable sequence timer, the STRAP V control box, third axis update, system gyro alignments, and STRAP V operational capabilities.

Budney, T. J.↗
NASA NTRS1983

Determinations of S III, O IV, and Ne V abundances in planetary nebulae from infrared lines

Twelve planetary nebulae have been subjected to airborne observations of the S III (18.71 microns), Ne V (24.28 microns) and O IV (25.87 microns) IR forbidden lines, of which one or more lines were detected in seven of the nebulae. These results are insensitive to nebula temperatures, in contrast to optical or UV lines, although density estimates from the latter were required to obtain abundances. The Ne V electron temperature of 11,200 + 2000 or - 1100 K temperature obtained overlaps O III temperature measurements. Since the ionization potential of Ne IV is much greater than that of O II, the electron temperature of Ne V should be much greater than that of O III. This discrepancy may indicate inaccuracies in currently available atomic parameters for Ne V.

Shure, M. A.↗
NASA NTRS1985

Near-conjugate observations of inverted-V electron precipitation using DE 1 and DE 2

A major focus of auroral research has been related to the inverted-V electron precipitation event, distinguished by the 'inverted-V' variation of peak energy flux in an energy-time spectrogram. Thieman and Hoffman (1984), in an examination of plasma data from near-conjugate DE 1/2 passes in the southern hemisphere, have found that some inverted-V events remain reasonably stable over a time span of up to 18 min, while other events change over shorter time periods. The present investigation has the objective to study quantitatively the energization of inverted-V electron fluxes and to compare the results with predictions from adiabatic acceleration by an electrostatic field. The obtained results suggest that the turbulent processes might contirbute minimally to the energy flux of secondary electrons for some events, but significantly for others.

Lin, C. S.↗
NASA NTRS1985

V-378A: A modified bismaleimide for advanced composites

Addition polyimides cure with no evolution of gaseous by-products at relatively low temperatures and may be cured at low pressures to yield composites with excellent hot-wet strength retention. These properaties have made them excellent candidates as matrix resins for advanced composites. However, commercially available bismaleimides are solids and difficult to handle in preimpregnated form. V-378A is an addition polyimide composed of a mixture of bismaleimides and other reactive ingredients formulated to provide good prepreg properties and handling, facile cure and excellent composite mechanical properties. Several curing mechanisms are utilized to provide the characteristics exhibited by V-378A. Part of the mechanism is free radial and takes place at ambient temperature and above. Other mechanisms are principally Diels-Alder in nature. V-378A prepregs are tacky at ambient temperature, but do not have long tacky outlife similar to some epoxies. V-378A yields composites which exhibit hot-wet strength retention which is superior to that provided by epoxy resin systems.

Street, S. W.↗