Search NASA⌕ Search

SEARCH · Search NASA

Results for “VERTICAL DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Elevated Aerosol Layers and Their Radiative Impact over Kanpur During Monsoon Onset Period

Accurate information about aerosol vertical distribution is needed to reduce uncertainties in aerosol radiative forcing and its effect on atmospheric dynamics. The present study deals with synergistic analyses of aerosol vertical distribution and aerosol optical depth (AOD) with meteorological variables using multisatellite and ground-based remote sensors over Kanpur in central Indo-Gangetic Plain (IGP). Micro-Pulse Lidar Network-derived aerosol vertical extinction (sigma) profiles are analyzed to quantify the interannual and daytime variations during monsoon onset period (May-June) for 2009-2011. The mean aerosol profile is broadly categorized into two layers viz., a surface layer (SL) extending up to 1.5 km (where sigma decreased exponentially with height) and an elevated aerosol layer (EAL) extending between 1.5 and 5.5 km. The increase in total columnar aerosol loading is associated with relatively higher increase in contribution from EAL loading than that from SL. The mean contributions of EALs are about 60%, 51%, and 50% to total columnar AOD during 2009, 2010, and 2011, respectively. We observe distinct parabolic EALs during early morning and late evening but uniformly mixed EALs during midday. The interannual and daytime variations of EALs are mainly influenced by long-range transport and convective capacity of the local emissions, respectively. Radiative flux analysis shows that clear-sky incoming solar radiation at surface is reduced with increase in AOD, which indicates significant cooling at surface. Collocated analysis of atmospheric temperature and aerosol loading reveals that increase in AOD not only resulted in surface dimming but also reduced the temperature (approximately 2-3 C) of lower troposphere (below 3 km altitude). Radiative transfer simulations indicate that the reduction of incoming solar radiation at surface is mainly due to increased absorption by EALs (with increase in total AOD). The observed cooling in lower troposphere in high aerosol loading scenario could be understood as a dynamical feedback of EAL-induced stratification of lower troposphere. Further, the observed radiative effect of EALs increases the stability of the lower troposphere, which could modulate the large-scale atmospheric dynamics during monsoon onset period. These findings encourage follow-up studies on the implication of EALs to the Indian summer monsoon dynamics using numerical models.

aerosol vertical distribution↗
NASA NTRS2005

Synergy Between probes and Orbiter

There are many ways in which the science return from a planetary mission is considerably enhanced by interactions between entry probes and a mission orbiter. Mission configuration aspects that are desirable include delivery of entry probes by the orbiter, and communication between probe and orbiter. Both of these mission aspects could greatly enhance access to key scientific sites that might not otherwise be accessible using delivery from say, a flyby, or employing direct communication from probes to Earth. Examples for Venus and Jupiter will be discussed. A second class of orbiter-probe interaction could better be termed direct probe-orbiter science collaboration. That would include, determining the global context of the entry probe sites from the orbiter, obtaining ground truth from the probe for remote sensing observations from the orbiter, observing the global and vertical distribution of key atmospheric trace species, and measuring the global and vertical distribution of clouds and winds. The importance of each of these items will be illustrated by particular examples.

Young, Richard E.↗
NASA NTRSDate not supplied

Cubespark: A New Satellite-Based 3d Lightning Observing Concept

Legacy and current space-based optical lightning detectors are insensitive to small and dim pulses that make up much of the lightning activity produced by severe storms. Moreover, lightning flashes produced at low altitudes within optically thick clouds are severely under-detected by current optical detectors. Lastly, there is currently no capability to characterize the 3D structure of lightning both day and night at the global scale, yet this information is critical for identifying lightning produced in updraft regions, including lightning occurring in overshooting tops, which is a distinctive signature of severe weather. Global 3D lightning information is also critical for understanding the vertical distribution of NOx production and identifying anomalously electrified storms. Furthermore, the vertical distribution of lightning has implications for how microphysical (e.g., ice-based) and thermodynamical (e.g., latent heat release) processes vary regionally, as well as seasonally – e.g., winter lightning typically occurs at lower altitudes than summer lightning and is often associated with tall, man-made structures. Finally, global-scale 3D lightning observations would directly provide flash type (i.e., CG or IC) information that is very useful in all of the studies mentioned in this paragraph and is fundamental in identifying/documenting deleterious CG-caused impacts (e.g., wildfires, power-outages, crop and property damage, and associated insurance claims). A new, satellite mission concept called CubeSpark is being designed to address these shortcomings and fill this measurement gap by providing novel 3D observations of total lightning activity. CubeSpark will utilize a constellation of low-Earth orbiting small satellites that make radio frequency (RF) and bi-spectral optical measurements of lightning. Two options for combining these measurements to retrieve the 3D location of lightning are considered with corresponding measurement simulators built to understand the level of detail and viability of each approach. Although the level of detail varies for each combined measurement approach, results indicate that a 3D location accuracy of < 1-2 km in each dimension is feasible across 300-500 km wide swaths, which suggests that CubeSpark can resolve the charge structure of thunderclouds from the tropics to the mid- and high-latitudes.

lightning↗
NASA NTRS1974

Venus - Vertical transport rates in the visible atmosphere

The cloud particles on Venus are sufficiently small for their vertical distribution to be strongly affected by atmospheric turbulence. Reasonably firm estimates of the vertical distribution of cloud particles can be made from current interpretations of refraction, polarization, and absorption band data. These enable very firm upper limits to be placed on average vertical mass diffusion coefficients in the visible atmosphere. These upper limits are independent of the cloud particle composition or mode of formation, and of changes in the particle size distribution with altitude.

Prinn, R. G.↗
NASA NTRS1985

Spectroradiometric calibration of the Thematic Mapper and Multispectral Scanner system

The effects of the atmosphere on propagating radiation must be known in order to calibrate an in orbit sensor using ground based measurements. A set of model atmosphere parameters, applicable to the White Sands (New Mexico) area is defined with particular attention given to those parameters which are required as input to the Herman Code. The radial size distribution, refractive index, vertical distribution, and visibility of aerosols are discussed as well as the molecular absorbers in the visible and near IR wavelength which produce strong absorption lines. Solar irradiance is also considered.

Palmer, J. M.↗
NASA NTRS1985

The observed distribution of atmospheric ozone and its variations

It is pointed out that both the total amount and the vertical distribution of atmospheric ozone are presently measured routinely by various ground-based and satellite-borne instruments and by instruments mounted on different carrier platforms such as balloons, aircraft, and rockets. The techniques of observing atmospheric ozone are discussed, taking into account the determination of total ozone, the Dobson spectrophotometer, the Brewer spectrophotometer, the M-83 Filter Ozonometer, and satellite techniques. In a discussion of studies of vertical distribution, remote systems are considered along with in situ measurements. Attention is given to ground-based methods, satellite platforms, backscatter measurements, limb observations, electrochemical methods, chemiluminescent methods, optical methods, and rocket observations. A number of graphs showing the observed distribution of atmospheric ozone are also presented, and changes in this distribution are evaluated.

London, J.↗
NASA NTRS2014

How Well Do Satellite AOD Observations Represent the Spatial and Temporal Variability of PM2.5 Concentration for the United States?

Due to their extensive spatial coverage, satellite Aerosol Optical Depth (AOD) observations have been widely used to estimate and predict surface PM2.5 concentrations. While most previous studies have focused on establishing relationships between collocated, hourly or daily AOD and PM2.5 measurements, in this study, we instead focus on the comparison of the large-scale spatial and temporal variability between satellite AOD and PM2.5 using monthly mean measurements. A newly developed spectral analysis technique e Combined Maximum Covariance Analysis (CMCA) is applied to Moderate Resolution Imaging Spectroradiometer (MODIS), Multi-angle Imaging Spectroradiometer (MISR), Sea-viewing Wide Field-of-view Sensor (SeaWiFS) and Ozone Monitoring Instrument (OMI) AOD datasets and Environmental Protection Agency (EPA) PM2.5 data, in order to extract and compare the dominant modes of variability. Results indicate that AOD and PM2.5 agree well in terms of interannual variability. An overall decrease is found in both AOD and PM2.5 across the United States, with the strongest signal over the eastern US. With respect to seasonality, good agreement is found only for Eastern US, while for Central and Western US, AOD and PM2.5 seasonal cycles are largely different or even reversed. These results are verified using Aerosol Robotic Network (AERONET) AOD observations and differences between satellite and AERONET are also examined. MODIS and MISR appear to have the best agreement with AERONET. In order to explain the disagreement between AOD and PM2.5 seasonality, we further use Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) extinction profile data to investigate the effect of two possible contributing factors, namely aerosol vertical distribution and cloud-free sampling. We find that seasonal changes in aerosol vertical distribution, due to the seasonally varying mixing height, is the primary cause for the AOD and PM2.5 seasonal discrepancy, in particular, the low AOD but high PM2.5 observed during the winter season for Central and Western US. In addition, cloud-free sampling by passive sensors also induces some bias in AOD seasonality, especially for the Western US, where the largest seasonal change in cloud fraction is found. The seasonal agreement between low level (below 500 m AGL), all sky CALIOP AOD and PM2.5 is significantly better than column AOD from MODIS, MISR, SeaWiFS and OMI. In particular, the correlation between low level, all sky AOD and PM2.5 seasonal cycles increases to above 0.7 for Central and Western US, as opposed to near zero or negative correlation for column, clear sky AOD. This result highlights the importance of accounting for the seasonally varying aerosol profiles and cloud-free sampling bias when using column AOD measurements to infer surface PM2.5 concentrations.

MODIS (radiometry)↗
NASA NTRS2004

Air Mass Factor Formulation for Spectroscopic Measurements from Satellites: Application to Formaldehyde Retrievals from the Global Ozone Monitoring Experiment

We present a new formulation for the air mass factor (AMF) to convert slant column measurements of optically thin atmospheric species from space into total vertical columns. Because of atmospheric scattering, the AMF depends on the vertical distribution of the species. We formulate the AMF as the integral of the relative vertical distribution (shape factor) of the species over the depth of the atmosphere, weighted by altitude-dependent coefficients (scattering weights) computed independently from a radiative transfer model. The scattering weights are readily tabulated, and one can then obtain the AMF for any observation scene by using shape factors from a three dimensional (3-D) atmospheric chemistry model for the period of observation. This approach subsequently allows objective evaluation of the 3-D model with the observed vertical columns, since the shape factor and the vertical column in the model represent two independent pieces of information. We demonstrate the AMF method by using slant column measurements of formaldehyde at 346 nm from the Global Ozone Monitoring Experiment satellite instrument over North America during July 1996. Shape factors are cumputed with the Global Earth Observing System CHEMistry (GEOS-CHEM) global 3-D model and are checked for consistency with the few available aircraft measurements. Scattering weights increase by an order of magnitude from the surface to the upper troposphere. The AMFs are typically 20-40% less over continents than over the oceans and are approximately half the values calculated in the absence of scattering. Model-induced errors in the AMF are estimated to be approximately 10%. The GEOS-CHEM model captures 50% and 60% of the variances in the observed slant and vertical columns, respectively. Comparison of the simulated and observed vertical columns allows assessment of model bias.

Palmer, Paul I.↗
NASA NTRS1994

Technical report series on global modeling and data assimilation. Volume 3: An efficient thermal infrared radiation parameterization for use in general circulation models

A detailed description of a parameterization for thermal infrared radiative transfer designed specifically for use in global climate models is presented. The parameterization includes the effects of the main absorbers of terrestrial radiation: water vapor, carbon dioxide, and ozone. While being computationally efficient, the schemes compute very accurately the clear-sky fluxes and cooling rates from the Earth's surface to 0.01 mb. This combination of accuracy and speed makes the parameterization suitable for both tropospheric and middle atmospheric modeling applications. Since no transmittances are precomputed the atmospheric layers and the vertical distribution of the absorbers may be freely specified. The scheme can also account for any vertical distribution of fractional cloudiness with arbitrary optical thickness. These features make the parameterization very flexible and extremely well suited for use in climate modeling studies. In addition, the numerics and the FORTRAN implementation have been carefully designed to conserve both memory and computer time. This code should be particularly attractive to those contemplating long-term climate simulations, wishing to model the middle atmosphere, or planning to use a large number of levels in the vertical.

Suarex, Max J.↗
NASA NTRS2020

The Evolution of Lidar Networks: A US Perspective

Atmospheric aerosols and clouds play an important role in climate by directly scattering and absorbing sunlight. Aerosol-cloud interactions modify the particle properties causing indirect effects, alter aerosol deposition and rainfall, and contribute substantially to the uncertainties in predicting climate effects. Aerosols also affect air quality and both constituents modulate boundary layer dynamics to a certain extent, in turn impacting aerosol transport and aerosol-cloud interactions. The spatiotemporal distribution of aerosol and cloud layers is thus important, and lidar remains the primary instrument for determining the vertical distribution of aerosols and thin clouds. Lidar still provides important information for opaque cloud layers by determining base heights. Combined lidar and radar data provide a comprehensive coverage of aerosol and cloud vertical distributions, and thus locations where and when they interact. Lidar data provide a means of constraining column aerosol loading observations (e.g. AOD) to vertical extents. In addition, lidar has proven effective at determining a proxy for boundary layer height by examining aerosol gradients and/or cloud base heights in lidar profiles. Polarized lidars provide additional information on particle shape, allowing estimates of cloud phase and separation of dust or smoke from sulfate and sea salt aerosols. Given the importance of lidar observations and a critical maturation in technology and retrieval techniques, several organizations began to build operational lidar networks around 2000. The European Aerosol Research Lidar Network (EARLINET) was started as a research focused network of advanced lidars across Europe. The Asian Dust Lidar Network (ADNET) was also developed as a regional network providing lidar profiles of dust and pollution across Eastern Asia. In the US, the NASA Micro Pulse Lidar Network (MPLNET) was created to provide global lidar profiling at key sites in the NASA Aerosol Robotic Network (AERONET). The Network for the Detection of Atmospheric Composition Change (NDACC) pre-dates these networks and many sites have lidar, but it is not strictly a lidar network and at the time focused less on the lower troposphere. Finally, there were already existing ceilometer networks operated by various meteorological agencies, but in particular here in the US the profile data has not been available. The ceilometer networks were used to provide only clouds base heights and estimates of PBL height. Thus, the distinguishing feature between lidar and ceilometer networks was historically the ability to actually provide profile information (in addition to differences in wavelength, and advanced retrievals such as the raman technique). As time progressed, each lidar network matured and developed more operational capabilities and data sets, coupled with viable data centers providing DAAC services and access to near-real-time (NRT) data. In 2008 under WMO guidance, the Global Atmospheric Watch (GAW) Aerosol Lidar Observation Network (GALION) was formed as a global network made up of the existing lidar networks. The goal was to share information, best practices, and develop frameworks and techniques for quality data. GALION grew to include several other regional lidar networks and this has led to a vast increase in quality lidar sites worldwide.

Welton, Ellsworth J.↗
NASA NTRSDate not supplied

Investigation of the Potential for Lidar & Polarimeter Combined Aerosol Retrievals Using Various Instrument Combinations

As a scientific community, we are motivated to achieve better observational capabilities for aerosols, to reduce uncertainties about aerosol’s role in climate. Encouraged by the National Academies Decadal Survey, many are looking to the synergy of lidar and polarimeter as a means of achieving improved measurements. Polarimetric observations of total-column radiances have excellent sensitivity to aerosol size distribution and absorption properties. Active lidar measurements have fewer wavelengths and view angles and therefore more limited sensitivity to aerosol microphysical properties such as complex refractive index. Yet the advantage of vertically resolved profiles is game-changing, especially given that models contain significant uncertainty about the vertical distribution of aerosol and that polarimeter and other passive retrievals must make assumptions about vertical distribution which can impact performance. To optimize the synergy, a joint polarimeter + lidar mission requires a joint retrieval. However, the exact instruments that will be launched on a future satellite are unknown, and the capabilities of polarimeters and lidars cover a large range. In this study, we perform information content analysis for a range of nominal instrument combinations. The methodology is ideal for assessing the impact of measurements and a priori information (assumptions and constraints) with respect to the desired retrieval products, and for comparing measurement systems. It has advantages that make it useful in advance of or in parallel with retrieval development, such as producing quantitatively useful comparisons even for retrieval scenarios that are significantly underdetermined and therefore impossible to retrieve without significant assumptions, and it is not impacted by retrieval-specific sources of error such as incomplete or incorrect convergence which can complicate the interpretation of a retrieval performance analysis. Here, we will derive the expected uncertainty in retrieved aerosol concentration, effective radius, fine mode fraction and single scattering albedo, for a combination of a polarimeter with various grades of lidar, from an elastic backscatter lidar, similar to the pathfinder CALIOP on the CALIPSO satellite, to a multi-wavelength high spectral resolution lidar.

Sharon P Burton↗
NASA NTRS1982

Determination of vertical ozone distributions by spacecraft measurements using a limb-scan technique

The principle of a new inversion technique which uses multiple wavelength-solar UV radiation satellite measurements for determining vertical ozone profiles is described, and examples of computer simulations for 280, 300, 320, and 340 nm are discussed. Weighting functions corresponding to the sensitivity of the limb radiance to the relative ozone density at each altitude are the basis for the inversion equation, which is then solved by an iteration technique. The use of multiple wavelengths can provide more information of higher accuracy over a wider height range than those profiles recovered at a single wavelength. It is indicated that an effective range of altitude of approximately 20-70 km with a vertical resolution of 1-2 km is feasible for determining ozone profiles with an inferred profile error about three to four times larger than the measurement error within that altitude region. Ozone profile accuracy of the highest altitude region may be improved using wavelengths down to 260 nm, and inferred ozone profiles above 70 km are possible, but with a larger error.

Aruga, T.↗
NASA NTRS1991

Diffuse ionized gas in nearby Galaxies

We discuss the distribution and spectral characteristics of diffuse ionized gas in nearby galaxies. The diffuse gas has been mapped in both edge-on and more face-on galaxies providing information on the radial and vertical distributions. Emission from diffuse ionized gas is strongest around star forming regions. The vertical distribution appears related to the radio continuum thick-disk emission. We also briefly discuss ionization mechanisms and the connection between star formation characteristics and morphology of the interstellar medium.

Walterbos, R. A. M.↗
NASA NTRS1999

Ozone Climatology

The primary role of models in the assessment process is to predict changes to ozone. It is crucial therefore that the ability of the models to reproduce the actual distribution of ozone be tested. Historically, maps of the ozone column (latitude by month) have been used for this purpose. In MM I a climatology was developed for the vertical distribution of ozone for 15-60 km, based on SBUV data for 1979-80. SBUV profiles are reported with vertical resolution of approx. 5 km, but the true resolution is lower, approx. 8 km above the ozone maximum and approx. 15 km for 10-25 km. The climatology was considered valid to about 20-30% at 20 km and to 50% at 15 km. Comparisons were made with models in mixing ratio (ppm), which emphasizes the middle and upper stratosphere. A new ozone climatology was developed for the vertical distribution of ozone for MM II. Our goal was to develop a product that could be used to evaluate models in the lower stratosphere, the region where most of the ozone column resides and where most of the ozone loss is occurring, as well as the middle and upper stratosphere.

Logan, Jennifer A.↗
NASA NTRS1994

The latitudinal distribution of ozone to 35 km altitude from ECC ozonesonde observations, 1982-1990

Electrochemical concentration cell (ECC) ozone-sonde observations, made in recent years at ten stations whose locations range from the Arctic to Antarctica, have yielded a self-consistent ozone data base from which mean seasonal and annual latitudinal ozone vertical distributions to 35 km have been derived. Ozone measurement uncertainties are estimated, and results are presented in the Bass-Paur (1985) ozone absorption coefficient scale adopted for use with Dobson ozone spectrophotometers January 1, 1992. The data should be useful for comparison with model calculations of the global distribution of atmospheric ozone, for serving as apriori statistical information in deriving ozone vertical distributions from satellite and Umkehr observations, and for improving the satellite and Umkehr ozone inversion algorithms. Attention is drawn to similar results based on a less comprehensive data set published in Ozone in the Atmosphere, Proceedings of the 1988 Quadrennial Ozone Symposium where errors in data tabulations occurred for three of the stations due to inadvertent transposition of ozone partial pressure and air temperature values.

Komhyr, W. D.↗
NASA NTRS1994

A passive microwave technique for estimating rainfall and vertical structure information from space. Part 1: Algorithm description

This paper describes a multichannel physical approach for retrieving rainfall and vertical structure information from satellite-based passive microwave observations. The algorithm makes use of statistical inversion techniques based upon theoretically calculated relations between rainfall rates and brightness temperatures. Potential errors introduced into the theoretical calculations by the unknown vertical distribution of hydrometeors are overcome by explicity accounting for diverse hydrometeor profiles. This is accomplished by allowing for a number of different vertical distributions in the theoretical brightness temperature calculations and requiring consistency between the observed and calculated brightness temperatures. This paper will focus primarily on the theoretical aspects of the retrieval algorithm, which includes a procedure used to account for inhomogeneities of the rainfall within the satellite field of view as well as a detailed description of the algorithm as it is applied over both ocean and land surfaces. The residual error between observed and calculated brightness temperatures is found to be an important quantity in assessing the uniqueness of the solution. It is further found that the residual error is a meaningful quantity that can be used to derive expected accuracies from this retrieval technique. Examples comparing the retrieved results as well as the detailed analysis of the algorithm performance under various circumstances are the subject of a companion paper.

Kummerow, Christian↗
NASA NTRS2000

The Geoscience Laser Altimeter System (GLAS) for the ICESAT Mission

The Laser In space Technology Experiment, Shuttle Laser Altimeter and the Mars Observer Laser Altimeter have demonstrated accurate measurements of atmospheric backscatter and Surface heights from space. The recent MOLA measurements of the Mars surface have 40 cm vertical resolution and have reduced the global uncertainty in Mars topography from a few km to about 5 m. The Geoscience Laser Altimeter System (GLAS) is a next generation lidar for Earth orbit being developed as part of NASA's Icesat Mission. The GLAS design combines a 10 cm precision surface lidar with a sensitive dual wavelength cloud and aerosol lidar. GLAS will precisely measure the heights of the Earth's polar ice sheets, establish a grid of accurate height profiles of the Earth's land topography, and profile the vertical backscatter of clouds and aerosols on a global scale. GLAS is being developed to fly on a small dedicated spacecraft in a polar orbit with a 590 630 km altitude at inclination of 94 degrees. GLAS is scheduled to launch in the summer 2001 and to operate continuously for a minimum of 3 years with a goal of 5 years. The primary mission for GLAS is to measure the seasonal and annual changes in the heights of the Greenland and Antarctic ice sheets. GLAS will continuously measure the vertical distance from orbit to the Earth's surface with 1064 nm pulses from a ND:YAG laser at a 40 Hz rate. Each 5 nsec wide laser pulse is used to produce a single range measurement, and the laser spots have 66 m diameter and about 170 m center-center spacings. When over land GLAS will profile the heights of the topography and vegetation. The GLAS receiver uses a 1 m diameter telescope and a Si APD detector. The detector signal is sampled by an all digital receiver which records each surface echo waveform with I nsec resolution and a stored echo record lengths of either 200, 400, or 600 samples. Analysis of the echo waveforms within the instrument permits discrimination between cloud and surface echoes. Ground based echo analysis permits precise ranging, determining the roughness or slopes of the surface as well as the vertical distributions of vegetation illuminated by the laser. Accurate knowledge of the laser beam's pointing angle is needed to prevent height biases when over sloped surfaces. For surfaces with 2 deg. slopes, knowledge of pointing angle of the beam's centroid to about 8 urad is needed to achieve 10 cm height accuracy. GLAS uses a stellar reference system (SRS) to determine the pointing angle of each laser firing relative to inertial space. The SRS uses a high precision star camera oriented toward local zenith and a gyroscope to determine the inertial orientation of the SRS optical bench. The far field pattern of each laser is measured pulse relative to the star camera with a laser reference system (LRS). Optically measuring each laser far field pattern relative to the orientation of the star camera and gyroscope permits the precise pointing angle of each laser pulse to be determined. GLAS will also determine the vertical distributions of clouds and aerosols by measuring the vertical profile of laser energy backscattered by the atmosphere at both 1064 and 532 nm. The 1064 nm measurements use the Si APD detector and profile the height and vertical structure of thicker clouds. The measurements at 532 nm use new highly sensitive photon counting, detectors, and measure the height distributions of very thin Clouds and aerosol layers. With averaging these can be used to determine the height of the planetary boundary layer. The instrument design and expected performance will be discussed.

Abshire, James B.↗
NASA NTRS1992

The ultraviolet albedo of Mars

Ultraviolet observations have proven successful at studying the composition and structure of the upper atmospheres of the giant planets and Venus. In the case of Mars, the analysis of UV data has concentrated on the spatial distribution and temporal behavior of ozone. The potential of far ultraviolet (FUV) data (shortward of 200 nm) for measuring the atmospheric structure, in particular the vertical distribution of aerosols, is demonstrated. For illustrative purposes, a simple two layer model (atmosphere and surface) is computed using the atmospheric composition measured at the Viking landing sites. This model is then compared to the albedo observed with the International Ultraviolet Explorer (IUE). This comparison clearly shows that a clear atmosphere with the nominal Viking mixing ratios of CO2, O2, and H2O is incompatible with the IUE data shortward of 200 nm. To obtain a better match between data and model, an aerosol has to be introduced that effectively scatters at these wavelengths. The required reduction in effective CO2 pathlength is a factor of 5. The comparison also points out the inadequacy of the IUE to provide data in the critical wavelength region between 195 nm and 210 nm. Such data will be forthcoming from the Hubble Space Telescope and will provide the opportunity to infer the vertical distribution of aerosols on Mars on a global scale.

Wagener, R.↗