Search NASA⌕ Search

SEARCH · Search NASA

Results for “WAVEGUIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Waveguide circuits in three-dimensional photonic crystals

Waveguide circuits in three-dimensional photonic crystals with complete photonic band gaps are simulated with finite difference time domain (FDTD) simulations, and compared with measurements on microwave scale photonic crystals. The transmission through waveguide bends critically depends on the photonic crystal architecture in the bend region. We have found experimentally and theoretically, a new waveguide bend configuration consisting of overlapping rods in the bend region, that performs better than the simple waveguide bend of terminated rods, especially in the higher frequency portion of the band. Efficient beam splitters with this junction geometry are also simulated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radial density profile and stability of capillary discharge plasma waveguides of lengths up to 40 cm

We measured the parameter reproducibility and radial electron density profile of capillary discharge waveguides with diameters of 650 μm to 2 mm and lengths of 9 to 40 cm. To the best of the authors’ knowledge, 40 cm is the longest discharge capillary plasma waveguide to date. This length is important for ≥10 GeV electron energy gain in a single laser-driven plasma wakefield acceleration stage. Evaluation of waveguide parameter variations showed that their focusing strength was stable and reproducible to <0.2% and their average on-axis plasma electron density to <1%. These variations explain only a small fraction of laser-driven plasma wakefield acceleration electron bunch variations observed in experiments to date. Measurements of laser pulse centroid oscillations revealed that the radial channel profile rises faster than parabolic and is in excellent agreement with magnetohydrodynamic simulation results. We show that the effects of non-parabolic contributions on Gaussian pulse propagation were negligible when the pulse was approximately matched to the channel. However, they affected pulse propagation for a non-matched configuration in which the waveguide was used as a plasma telescope to change the focused laser pulse spot size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microwave guiding in air by a cylindrical filament array waveguide

Microwave guiding was demonstrated over 16 cm in air using a large diameter hollow plasma waveguide. The waveguide was generated with the 100 TW femtosecond laser system at the Advanced Laser Light Source facility. A deformable mirror was used to spatially shape the intense laser pulses in order to generate hundreds of filaments judiciously distributed in a cylindrical shape, creating a cylindrical plasma wall that acts as a microwave waveguide. The microwaves were confined for about 10 ns, which corresponds to the free electron plasma wall recombination time. The characteristics of the plasma waveguide and the results of microwave guiding are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dispersion and interaction of waveguide modes in a relativistic electron beam with ion-channel guiding

A theory for the high-frequency eigenmodes of a cylindrical metallic waveguide partially filled with a relativistic electron beam and guided by an ion channel is presented. Equations that permit calculation of dispersion curves for five families of wave modes are derived. The dependence of the frequencies and the dispersion curves of azimuthally asymmetric modes on the ratio of the beam radius a to the waveguide radius R are studied in detail. The coupling of the dispersion curves of different modes is studied and illustrated for the partially filled waveguide. It was found that, in their course of interaction, HE modes cannot displace the betatron modes in a completely filled waveguide, which is different from the case of a magnetized electron beam. Physical and analytical explanations are presented for this difference.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Axially Modulated Plasma Waveguides

We demonstrate two techniques for making periodically modulated plasma waveguides-one with sharp, stable voids as short as 50 {mu}m with a period as small as 200 {mu}m, and another which modulates the waveguide diameter with a corrugation period as short as 35 {mu}m[1]. These features persist as the plasma expands for the full lifetime of the waveguide (>6 ns). The waveguides were made using the hydrodynamic shock method in a cluster jet using hydrogen, nitrogen, and argon. We demonstrate guided propagation at intensities up to 2x10{sup 17} W/cm{sup 2}, limited by our laser energy currently available. This technique is useful for quasi-phase matching to allow efficient coupling of laser energy to acceleration of relativistic electrons or generation of coherent electromagnetic radiation at selected frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accounting for water-column variability in shallow-water waveguide characterizations based on modal eigenvalues

The influence of water-column variability on the characterization of shallow-water waveguides using modal eigenvalue information is considered. This work is based on the relationship between the acoustic pressure field in shallow water and the depth-dependent Green's function through the Hankel transform. In many practical situations, the Hankel transform can be approximated by a Fourier transform, in which case the Green's function is approximated by a horizontal wave number spectrum with discrete peaks corresponding with individual modal eigenvalues. In turn, the wave number data can be used in inverse algorithms to determine geoacoustic properties of the waveguide. Wave number spectra are estimated from measurements of a point-source acoustic field on a horizontal aperture array in the water column. For range-dependent waveguides, techniques analogous to using a short-time Fourier transform are employed to estimate range-dependent wave number spectra. In this work, water-column variability due to linear internal waves and mesoscale features are considered. It will be shown that these two types of variability impact the estimation of range-dependent modal eigenvalues in different ways. Approaches for accounting for these different types of variability will be discussed as they apply to waveguide characterization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Terahertz emission from a two-color plasma filament in a slot waveguide

Terahertz emission in forward direction from a long two-color filament placed in the center of a slot waveguide is reported. The waveguide improves the collection and imaging of the generated THz radiation. By tuning the plate separation and position of the waveguide along the filament axis, the emitted mode can be matched to the collection optics. We achieved an increase of the detected electric field by 40% and of the THz pulse energy by four times compared to the case without waveguide.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Test particle simulation of direct laser acceleration in a density-modulated plasma waveguide

Direct laser acceleration (DLA) of electrons by the use of the intense axial electric field of an ultrafast radially polarized laser pulse is a promising technique for future compact accelerators. Density-modulated plasma waveguides can be implemented for guiding the propagation of the laser pulse to extend the acceleration distance and for the quasi-phase-matching between the accelerated electrons and the laser pulse. A test particle model is developed to study the optimal axial density modulation structure of plasma waveguides for laser pulses to efficiently accelerate co-propagating electrons. A simple analytical approach is also presented, which can be used to estimate the energy gain in DLA. The analytical model is validated by the test particle simulation. The effect of injection phase and acceleration of electrons injected at various radial positions are studied. The results indicate that a positively chirped density modulation of the waveguide structure is required to accelerate electron with low initial energies, and can be effectively optimized. A wider tolerance on the injection phase and radial distance from the waveguide axis exists for electrons injected with a higher initial energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of microwave leaky modes propagating through laser plasma filaments column waveguide

A plasma column waveguide formed by a bundle of closely spaced plasma filaments induced by the propagation of ultrafast laser pulses in air and revived by a longer infrared laser pulse is shown to support microwave radiation. We consider values of both the plasma electron density and microwave frequency for which the refractive index of plasma is lower than the refractive index of air; therefore, a leaky plasma waveguide can be realized in extremely high frequency band. The guiding mechanism does not require high conductance of the plasma and can be easily excited by using commercial femtosecond laser sources. A theoretical study of leaky mode characteristics of isotropic and homogeneous plasma column waveguides is investigated with several values of plasma and waveguide structure parameters. The microwave transmission loss was found to be mainly caused by the microwave leakage through the air-plasma interface and is weakly dependent on the plasma absorption. In spite of losses of microwaves caused by leakage and plasma absorption, it is shown to be much lower than both that accompanying to surface waves attaching to single conducting plasma wire and the free space propagation over distances in the order of the filament length, which opens exciting perspectives for short distance point to point wireless transmission of pulsed-modulated microwaves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Planned waveguide electric field breakdown studies

This paper presents an experimental setup for X-band rf breakdown studies. The setup is composed of a section of WR90 waveguide with a tapered pin located at the middle of the waveguide E-plane. Another pin is used to rf match the waveguide so it operates in a travelling wave mode. By adjusting the penetration depth of the tapered pin, different surface electric field enhancements can be obtained. The setup will be used to study the rf breakdown rate dependence on power flow in the waveguide for a constant maximum surface electric field on the pin. Two groups of pins have been designed. The Q of one group is different and very low. The other has a similar Q. With the test of the two groups of pins, we should be able to discern how the net power flow and Q affect the breakdown. Furthermore, we will apply an electron beam treatment to the pins to study its effect on breakdown. Overall, these experiments should be very helpful in understanding rf breakdown phenomena and could significantly benefit the design of high gradient accelerator structures.

43 PARTICLE ACCELERATORS↗

Density modification by two superposing TE{sub 10} modes in a plasma filled rectangular waveguide

Microwave and plasma interaction is examined via two fundamental TE{sub 10} modes propagating in a plasma filled rectangular waveguide after superposing at a smaller angle. The propagation of the resultant mode realized from these two modes is governed by a wave equation obtained using the Maxwell's equations. This equation is solved numerically using fourth order Runge-Kutta method for the field amplitude of the microwave in the waveguide considering the waveguide to be made up of a perfect conductor and filled with different types of initial plasma density distributions, viz. homogeneous density, linear density with gradient in the propagation direction, and the density with Gaussian profile along the waveguide width. A phenomenon similar to the duct formation by high power microwaves is found to take place, where the plasma density attains interesting profiles. These profiles can be controlled by the angle of superposition, phase difference between the fields of the two modes, microwave frequency and microwave field amplitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of the gas/plasma plume and self-focusing in a gas-filled capillary discharge waveguide for high-power laser-plasma applications

The role of the gas/plasma plume at the entrance of a gas-filled capillary discharge plasma waveguide in increasing the laser intensity has been investigated. Distinction is made between neutral gas and hot plasma plumes that, respectively, develop before and after discharge breakdown. Time-averaged measurements show that the on-axis plasma density of a fully expanded plasma plume over this region is similar to that inside the waveguide. Above the critical power, relativistic and ponderomotive self-focusing lead to an increase in the intensity, which can be nearly a factor of 2 compared with the case without a plume. When used as a laser plasma wakefield accelerator, the enhancement of intensity can lead to prompt electron injection very close to the entrance of the waveguide. Self-focusing occurs within two Rayleigh lengths of the waveguide entrance plane in the region, where the laser beam is converging. Analytical theory and numerical simulations show that, for a density of 3.0 × 10{sup 18} cm{sup −3}, the peak normalized laser vector potential, a{sub 0}, increases from 1.0 to 1.85 close to the entrance plane of the capillary compared with a{sub 0} = 1.41 when the plume is neglected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evanescent-wave coupled right angled buried waveguide: Applications in carbon nanotube mode-locking

We present an evanescent-field device based on a right-angled waveguide. This consists of orthogonal waveguides, with their points of intersection lying along an angled facet of the chip. Light guided along one waveguide is incident at the angled dielectric-air facet at an angle exceeding the critical angle, so that the totally internally reflected light is coupled into the second waveguide. By depositing a nanotube film on the angled surface, the chip is then used to mode-lock an Erbium doped fiber ring laser with a repetition rate of 26 MHz, and pulse duration of 800 fs.

36 MATERIALS SCIENCE↗

Microwave gas breakdown in elliptical waveguides

This paper analyzes the microwave gas discharge within elliptical waveguides excited by the fundamental mode. The Rayleigh-Ritz method has been applied to solve the continuity equation. The eigenvalue problem defined by the breakdown condition has been solved and the effective diffusion length of the elliptical waveguide has been calculated, what is used to find the corona threshold. This paper extends the microwave breakdown model developed for circular waveguides and shows the better corona withstanding capabilities of elliptical waveguides. The corona breakdown electric field threshold obtained with the variational method has been compared with the one calculated with the Finite Elements Method, showing excellent agreement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-loss waveguiding and detecting structure for surface plasmon polaritons

A simple and low-loss metal/semiconductor surface plasmon polariton (SPP) device consisting of a SPP waveguide and a detector is studied theoretically and experimentally. We demonstrate a simple diffraction structure (a metal grating) where the SPP couples from the waveguide to the detector. The SPP can propagate without large losses at the air/Au interface, and this interface was used for SPP waveguiding. To convert the SPP into an electric signal using internal photoemission, the propagating SPP is coupled into the Au/Si interface by the diffraction structure. The propagation direction of the coupled SPP at the Au/Si interface depends on the slit pitch of the diffraction structure, and the direction can be controlled by adjusting the pitch. The slit pitch is also modeled using a diffraction grating equation, and the results show good agreement with those of simulations using the finite-difference time-domain method. When diffraction structures consisting of a multi-slit structure and a disk array are placed at the end of the waveguide, SPP coupling into the Au/Si interface is also observed. The photocurrents detected at the Au/Si interface are much larger when compared with that detected for the device without the diffraction structure (26 times for the multi-slit structure and 10 times for the disk array). From the polarization angle dependence of the detected photocurrent, we also confirmed that the photocurrent was caused by the SPP propagating at the air/Au interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Position dependent spin wave spectrum in nanostrip magnonic waveguides

The dispersion curves of propagating spin wave along different positions in nanostrip magnonic waveguides were studied by micromagnetic simulation. The results show that the modes of spin wave in the nanostrip magnonic waveguide are dependent on the position and the weak even modes of spin wave are excited even by symmetric excitation fields in a nanostrip magnonic waveguide. The reasons of the position dependent dispersion curve are explained by associating with geometrical confinement in the nanostrip magnonic waveguide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct-bandgap electroluminescence from a horizontal Ge p-i-n ridge waveguide on Si(001) substrate

Horizontal injection Ge p-i-n ridge waveguide light emitting diodes (LEDs) were fabricated on n{sup −}-Si(001) substrates by ultrahigh vacuum chemical vapor deposition. The direct-bandgap electroluminescence (EL) of Ge waveguide LEDs under a continuous/pulse electrical pump was studied. The heating effect from a continuous electrical pump was found to significantly enhance the emission of devices. The top surface EL intensity of the Ge waveguide LEDs significantly depended on the position. Most direct-bandgap radiative recombination of Ge p-i-n waveguide LEDs occurred near the N{sup +} region of the junction. This interesting phenomenon could be explained by the carrier distribution in the junction and the pseudo-direct bandgap of Ge.

36 MATERIALS SCIENCE↗

Long-range hybrid ridge and trench plasmonic waveguides

We report a class of long-range hybrid plasmon polariton waveguides capable of simultaneously achieving low propagation loss and tight field localization at telecommunication wavelength. The symmetric (quasi-symmetric) hybrid configurations featuring high-refractive-index-contrast near the non-uniform metallic nanostructures enable significantly improved optical performance over conventional hybrid waveguides, exhibiting considerably longer propagation distances and dramatically enhanced figure of merits for similar degrees of confinement. Compared to their traditional long-range plasmonic counterparts, the proposed hybrid waveguides put much less stringent requirements on index-matching conditions, demonstrating nice performance under a wide range of physical dimensions and robust characteristics against certain fabrication imperfections. Studies concerning crosstalk between adjacent identical waveguides further reveal their potential for photonic integrations. In addition, alternative configurations with comparable guiding properties to the structures in our case studies are also proposed, which can potentially serve as attractive prototypes for numerous high-performance nanophotonic components.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗