SEARCH · Search NASA
Results for “Wood”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Environmental full cost accounting of alternative materials used for railroad ties: Treated-wood and concrete case study
Not Available
Comparative life cycle assessment of a modular cross-laminated timber residential building designed for disassembly and reuse versus traditional wood frame construction
There is a need for affordable housing across the U.S., with high-performance modular and prefabricated buildings providing a logical avenue for meeting some of this demand. However, there is a need to balance high performance construction – including low emissions – with affordability. To provide a proof-of-concept in meeting these goals, the Circular Home is a cross-laminated timber (CLT)-based deconstructible and reconfigurable single-family residence that meets high performance targets in moisture, energy, design, economics, and life cycle assessment (LCA). This study focuses on the LCA, presenting a cradle-to-cradle whole-building life cycle assessment (WBLCA) for the Circular Home and a functionally equivalent Baseline Home constructed with traditional materials and methods. The functional unit is 1 m 2 of gross floor area across 60 years. Revit building information models (BIM) provided material quantities and Tally LCA was utilized for impact data (inclusive of biogenic carbon sequestration), supplemented with manufacturer environmental product declarations (EPDs). The Circular Home outperforms the baseline residence in most measured impact categories, including global warming potential (GWP), producing −2.73 kgCO 2 eq/m 2 in embodied emissions, whereas the modeled baseline has an embodied GWP of 428 kgCO 2 eq/m 2 . The careful material selection and advanced building design optimizes performance, with the Circular Home containing only −0.006 times the embodied emissions and −0.02 times the operational emissions of its traditional counterpart. Finally, the unique contribution of this work is in the environmental impact comparison of a high-performance modular CLT structure that can be affordably scaled and mass produced in a U.S. market, compared to typical single family home construction.
Study of cure conditions effect on the properties of wood biomass fly ash geopolymers
Not Available
Hardened wood as a renewable alternative to steel and plastic
Not Available
WUSCHEL-RELATED HOMEOBOX genes are crucial for normal vascular organization and wood formation in poplar
Not provided.
Highly Stretchable, Transparent, and Conductive Wood Fabricated by in Situ Photopolymerization with Polymerizable Deep Eutectic Solvents
Explore the source record for details and available documents.
Measurement of moisture-dependent ion diffusion constants in wood cell wall layers using time-lapse micro X-ray fluorescence microscopy
Our future bioeconomy depends on increased utilization of renewable lignocellulosic biomass. Controlling the diffusion of chemicals, such as inorganic ions, within secondary plant cell walls is central to many biomass applications. However, insufficient understanding of intra-cell-wall diffusion within secondary plant cell walls is hindering the advancement of many lignocellulosic biomass applications. In this work, X-ray fluorescence microscopy was used to measure diffusion constants of K + , Cu 2+ , and Cl - diffusing through loblolly pine (Pinus taeda) cell wall layers under 70%, 75%, or 80% relative humidity (RH). Results revealed that diffusion constants increased with RH, the larger Cu 2+ diffused more slowly than the K + , and the Cl - diffusion constant was the same as that for the counter cation, indicating cations and anions diffused together to maintain charge neutrality. Comparison with electrical conductivity measurements showed that conductivity is being controlled by ion mobility over these RH. The results further support that intra-cell-wall diffusion of inorganic ions is a Fickian diffusion process occurring through rubbery amorphous polysaccharides, which contradicts previous assertions that intra-cell-wall diffusion is an aqueous process occurring through water pathways. Researchers can now utilize polymer science approaches to engineer the molecular architecture of lignocellulosic biomass to optimize properties for specific end uses.
Author Correction: Genome sequencing of Rigidoporus microporus provides insights on genes important for wood decay, latex tolerance and interspecific fungal interactions
The original version of this Article contained errors in the author affiliations.
Sunlight can turn smoldering pine wood smoke into a glass
Wildfires inject biomass burning organic aerosols (BBOA) into the atmosphere. During their lifetimes of weeks to months, they are exposed to ultraviolet (UV) irradiation. Viscosity and phase behaviour are essential properties for understanding their chemical and climate impacts. Here, we quantify changes in viscosity and phase behavior after UV exposure. After an atmospheric equivalent of 8.7 days of boundary layer UV exposure, BBOA develop a highly viscous (glassy) outer phase with a viscosity at least five orders of magnitude higher than unaged BBOA, which persists up to at least 58% relative humidity. High-resolution mass spectrometry indicates that UV-aging increases oxidation and molecular weight. Using our viscosity results, we predict that UV-aged BBOA are frequently glassy above ~2.5 km and can have viscosities up to eight orders of magnitude higher than unaged particles in some atmospheric regions, which may influence lifetimes of pollutants and brown carbon, and impact stratospheric ozone chemistry.
From cellulose to 1,2,4-benzenetriol via catalytic degradation over a wood-based activated carbon catalyst
In this study, spherical P-doped activated carbon (CSP) was obtained from poplar bark by microwave carbonization with phosphoric acid as the dopant and activating agent. Phosphorus bonded with four oxygen atoms to form a phosphate-like structure rather than directly bonding with C atoms in CSP; such groups can provide Lewis acid active sites with moderately strong acidity. The Lewis acid and total acid content increased with increasing phosphoric acid doping ratio. The use of phosphoric acid as an activating agent promotes the formation of a developed porous structure. CSP 1 (mass ratio of raw material to acid = 1 : 1) had a specific surface area of 1115 m 2 g –1 with developed micro–mesoporous structures, mainly micropores. Investigation of the activity of CSP in catalytic cellulose hydrolysis during hydrothermal degradation showed that Brønsted acid sites promote hydrolysis and dehydration of cellulose, Lewis acid sites promote subsequent reactions such as isomerization, rearrangement, and oligomerization, and the developed pores can provide reaction sites and facilitate reactant transportation. The optimal reaction conditions, i.e. , 1 h at 230 °C and 1 MPa with CSP 1 (0.4 g) as the catalyst, gave a cellulose conversion of >99.9%, with 42.30% selectivity for 1,2,4-benzenetriol. This study provides an effective method for preparing 1,2,4-benzenetriol from cellulose with biomass-based activated carbon as the catalyst, which enables green synthesis of 1,2,4-benzenetriol and promotes the use of biomass waste resources.
Rapid screening of wood and leaf tissues: investigating silicon-based phytoliths in Populus trichocarpa for carbon storage applications using laser-induced breakdown spectroscopy and scanning electron microscopy–energy dispersive X-ray spectroscopy
Phytoliths, which are noncrystalline particles of amorphous silica that form inside plant cells, contribute to the global carbon cycle through their ability to occlude organic carbon.
Teredinibacter haidensis sp. nov., Teredinibacter purpureus sp. nov. and Teredinibacter franksiae sp. nov., marine, cellulolytic endosymbiotic bacteria isolated from the gills of the wood-boring mollusc Bankia setacea (Bivalvia: Teredinidae) and emended description of the genus Teredinibacter
Here, we describe three endosymbiotic bacterial strains isolated from the gills of the shipworm, Bankia setacea (Teredinidae: Bivalvia). These strains, designated as Bs08 T , Bs12 T and Bsc2 T , are Gram-stain-negative, microaerobic, gammaproteobacteria that grow on cellulose and a variety of substrates derived from lignocellulose. Phenotypic characterization, phylogeny based on 16S rRNA gene and whole genome sequence data, amino acid identity and percentage of conserved proteins analyses, show that these strains are novel and may be assigned to the genus Teredinibacter. The three strains may be differentiated and distinguished from other previously described Teredinibacter species based on a combination of four characteristics: colony colour (Bs12 T , purple; others beige to brown), marine salt requirement (Bs12 T , Bsc2 T and Teredinibacter turnerae strains), the capacity for nitrogen fixation (Bs08 T and T. turnerae strains) and the ability to respire nitrate (Bs08 T ). Based on these findings, we propose the names Teredinibacter haidensis sp. nov. (type strain Bs08 T =ATCC TSD-121 T =KCTC 62964 T ), Teredinibacter purpureus sp. nov. (type strain Bs12 T =ATCC TSD-122 T =KCTC 62965 T ) and Teredinibacter franksiae sp. nov. (type strain Bsc2 T =ATCC TSD-123 T =KCTC 62966 T ).
Data from Raczka et al., Interactions between microbial diversity and substrate chemistry determine the fate of carbon in soil, from Elizabeth Woods in Morgantown, West Virginia, USA
File types include: Soil respiration as 13C cumulative respiration from soil incubation experiment, qSIP (quantitative stable isotope probing) data that is "18S apes wide" which is the fungal atom percent excess or how much the fungi took up of the labeled litter and "16S apes wide" which is the bacterial atom percent excess or how much the bacteria took up of the labeled litter, metabolomic data from the incubated soil samples called "Metab Soil Unique Filtered", which is the metabolomic data that had an initial filter from the raw data, and lipidomic data from the incubated soil samples called "All lipids soil". These files were used according to methods in Raczka et al. 2021 Scientific Reports. Headers show soil type (Oak, Poplar) and litter type (also called substrate here, which is labeled as no litter (control), poplar, and oak). This research was done to understand interactions between ecosystem-level processes and microbial diversity that impacts the composition of decomposition products that can form stable soil organic matter.
Wood-to-Fuel for California's Transportation Sector using Autothermal Pyrolysis (FRD-17-002 Progress Report)
During the month of January, further research was carried out on understanding and evaluating the availability and potential availability of fire clearing, and other, forestry residue in California. Further investigations into the negative emissions of biomass pyrolysis products and their upgrading for use in other products (such as fuels) by incorporating carbon capture, drying and compression, and sequestration systems were executed. The cost to achieve the maximum amount of negative emissions from these biomass-pyrolysis products with carbon capture and sequestration techniques was calculated. Sensitivity analysis was employed to understand how feedstock collection cost and product selling price affects this cost.