Search NASA⌕ Search

SEARCH · Search NASA

Results for “accumulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Global Positioning System measurements of strain accumulation across the Imperial Valley, California - 1986-1989

The Global Positioning System (GPS) data collected in southern California from 1986 to 1989 indicate considerable strain accumulation across the Imperial Valley. Displacements are computed at 29 stations in and near the valley from 1986 to 1988, and at 11 sites from 1988 to 1989. The earlier measurements indicate 5.9 =/- 1.0 cm/yr right-lateral differential velocity across the valley, although the data are heavily influenced by the 1987 Superstition Hills earthquake sequence. Some measurements, especially the east-trending displacements, are suspects for large errors. The 1988 to 1989 GPS displacements are best modeled by 5.2 =/- 0.9 cm/yr of valley crossing deformation, but rates calculated from conventional geodetic measurements (3.4 to 4.3 cm/yr) fit the data nearly as well. There is evidence from GPS and Very Long Base Interferometry (VLBI) observations that the present slip rate along the southern San Andreas fault is smaller than the long-term geologic estimate, suggesting a lower earthquake potential than is currently assumed. Correspondingly, a higher earthquake potential is indicated for the San Jacinto fault. The Imperial Valley GPS sites form part of a 183 station network in southern California and northern Baja California, which spans a cross-section of the North American-Pacific plate boundary.

Larsen, Shawn↗
NASA NTRS1993

Strain accumulation in the Santa Barbara Channel - 1970-1988

Geodetic observations between 1970 and 1988 indicate appreaciable strain accumulation in the Santa Barbara Channel, California. Eleven line-length changes from a six-station geodetic network spanning the eastern two-thirds of the channel were determined from electronic distance measurements in 1970/1971 and Global Positioning System observations in 1987/1988. Within this network the strains observed are spatially nonuniform. In the easternmost channel the strain is nearly uniaxial, with convergence of 6.4 +/- 0.9 mm/yr oriented N 25 deg E +/- 5 deg; this direction is consistent with the seismicity, which is dominated by thrust mechanisms with P axes directed to the northeast. In the central channel the strain is less well determined, but appears to include a significant component of shear that is left-lateral when resolved on an east-west plane.

Larsen, Shawn C.↗
NASA NTRS1992

Alterations in biosynthetic accumulation of collagen types I and III during growth and morphogenesis of embryonic mouse salivary glands

We examined the biosynthetic patterns of interstitial collagens in mouse embryonic submandibular and sublingual glands cultured in vitro. Rudiments explanted on day 13 of gestation and cultured for 24, 48, and 72 h all synthesized collagen types I, III, and V. However, while the total incorporation of label into collagenous proteins did not change over the three-day culture period, the rate of accumulation of newly synthesized types I and III did change. At 24 h, the ratio of newly synthesized collagen types I:III was approximately 2, whereas at 72 h, the ratio was approximately 5. These data suggest that collagen types I and III may be important in initiation of branching in this organ, but that type I may become dominant in the later stages of development and in maintenance of the adult organ.

Hardman, P.↗
NASA NTRS1948

Charts for Determining Preliminary Values of Span-load, Shear, Bending-moment, and Accumulated-torque Distributions of Swept Wings of Various Taper Ratios

Contains charts for use in determining preliminary values of the spanwise-load, shear, bending-moment, and accumulated-torque distributions of swept wings. The charts are based on strip theory and include four aerodynamic-load distributions, two section-moment distributions, and two inertia-load distributions. The taper ratios considered cover the range from 1.0 to 0 and the results are applicable to any angle of sweep.

LOADS, MANEUVERING - WINGS↗
NASA NTRS1993

An advanced test technique to quantify thermomechanical fatigue damage accumulation in composite materials

A mechanical test technique was developed to assist in quantifying the accumulation of damage in composite materials during thermomechanical fatigue (TMF) cycling. This was accomplished by incorporating definitive elastic mechanical property measurements into an ongoing load-controlled TMF test without disturbing the test specimen or significantly altering the test conditions. The technique allows two fundamental composite properties consisting of the isothermal elastic static moduli and the macroscopic coefficient of thermal expansion (CTE) to be measured and collected as functions of the TMF cycles. The specific implementation was incorporated into the commonly employed idealized in-phase and out-of-phase TMF cycles. However, the techniques discussed could be easily implemented into any form of load-controlled TMF mission cycle. By quantifying the degradations of these properties, tremendous insights are gained concerning the progression of macroscopic composite damage and often times the progression of damage within a given constituent. This information should also be useful for the characterization and essential for the verification of analytical damage modeling methodologies. Several examples utilizing this test technique are given for three different fiber lay-ups of titanium metal matrix composites.

Castelli, Michael G.↗
NASA NTRS1993

Polar sediment accumulation: Role of surface winds at the two poles

The accumulation of the large deposits of volatile and nonvolatile sediments at both Martian poles has occurred through periods of likely climate change. Most data on wind directions near the Martian poles and seasonal activity relate to a very short period of time, at one point in climate cycles. It is still uncertain what the net budgets to the poles are and how this budget (if known) would fit into longer climate/sediment cycles. Pending further data we examined the full suite of Viking high-resolution, high-latitude images for wind markers of all sizes and types. These probably represent timescales of formation from days to several tens of thousands of years. The goal is to estimate the effectiveness, and possible drivers, of wind systems that bring materials near the surface to the regions of polar sediments and that also remove materials from the polar areas.

Thomas, P. C.↗
NASA NTRS1994

Strain accumulation in the Shumagin Islands: Results of initial GPS measurements

Deformation in the Shumagin seismic gap has been monitored with repeated trilateration (EDM) in the 1980-1987 interval and with the Global Positioning System (GPS) in the 1987-1991 interval. The geodetic network extends for 100-km across the Shumagin Islands to the Alaska Peninsula. Results from the GPS surveys are consistent with those previously reported for the EDM surveys: we failed to detect significant strain accumulation in the N30 deg W direction of plate convergence. Using the method of simultaneous reduction for position and strain rates, we found the average rate of extension in the direction of plate convergence to be -25 +/- 25 nanostrain/yr (nstrain/yr) during the 1987-1991 interval of GPS surveys compared with -20 +/- 15 nstrain/yr during the 1981-1987 interval of complete EDM surveys. We found a marginally significant -26 +/- 12 nstrain/yr extension rate in the 1981-1991 interval covered by the combined EDM and GPS surveys. Strain rates are higher, but not significantly so, in the part of the network closest to the trench. Spatial variation in the deformation is observed in the 1980-1991 average station velocities, where three of the four stations closest to the trench have an arcward velocity of a few mm/yr. The observed strain rates are an order of magnitude lower than the -200 nstrain/yr rate predicted by dislocation models.

Larson, Kristine M.↗
NASA NTRS1996

Damage accumulation in closed cross-section, laminated, composite structures

The need for safe, lightweight, less expensive, and more reliable launch vehicle components is being driven by the competitiveness of the commercial launch market. The United States has lost 2/3 of the commercial lunch market to Europe. As low cost Russian and Chinese vehicles become available, the US market share could be reduced even further. This international climate is driving the Single Stage To Orbit (SSTO) program at NASA. The goal of the SSTO program is to radically reduce the cost of safe, routine transportation to and from space with a totally reusable launch vehicle designed for low-cost aircraft-like operations. Achieving this goal will require more efficient uses of materials. Composite materials can provide this program with the material and structural efficiencies needed to stay competitive in the international launch market place. In satellite systems the high specific properties, design flexibility, improved corrosion and wear resistance, increased fatigue life, and low coefficient of thermal expansion that are characteristic of composite materials can all be used to improve the overall satellite performance. Some of the satellites that may be able to take advantage of these performance characteristics are the Tethered Satellite Systems (TOSCIFER, AIRSEDS, TSS2, SEDS1, and SEDS2), AXAF, GRO, and the next generation Hubble Space Telescope. These materials can also be utilized in projects at the NASAIMSFC Space Optics Technology and System Center of Excellence. The successful implementation of composite materials requires accurate performance characterization. Materials characterization data for composite materials is typically generated using flat coupons of finite width. At the free edge of these coupons the stress state is exacerbated by the presence of stiffness and geometric discontinuities. The exacerbated stress state has been shown to dominate the damage accumulation in these materials and to have a profound affect on the material constants. Space structures typically have closed cross-sections, absent of free edges. As a result, composite material characterization data generated using finite width flat specimens does not accurately reflect the performance of the composite materials used in a closed cross-section structural configuration. Several investigators have recognized the need to develop characterization techniques for composite materials in closed cross-sectioned structures. In these investigations test methods were developed and cylindrical specimens were evaluated. The behavior of the cylindrical specimens were observed to depart from behavior typical of flat coupons. However, no attempts were made to identify and monitor the progression of damage in these cylindrical specimens during loading. The identification and monitoring of damage is fundamental to the characterization of composite materials in closed cross-section configurations. In the study reported here, a closed cross-sectioned test method was developed to monitor damage progression in 2 in. diameter cylindrical specimens and 1.5 in. finite width flat coupons subjected to quasi-static, tensile loading conditions. Damage in these specimen configurations was monitored using pulse echo ultrasonic, acoustic emission, and X-ray techniques.

Bucinell, Ronald B.↗
NASA NTRS1992

An Extraordinary Accumulation of (-)-Pinoresinol in Cell-Free Extracts of Forsythia intermedia: Evidence for Enantiospecific Reduction of (+)-Pinoresinol

Stereoselective and enantiospecific transformation mechanisms in lignan biogenesis are only now yielding to scientific inquiry: it has been shown that soluble cell-free preparations from Forsythia intermedia catalysis the formation of the enantiomerically pure lignan, (-)-secoisolariciresinol, when incubated with coniferyl alcohol in the presence of NAD(P)H and H2O2. Surprisingly, (-)-pinoresinol also accumulates in this soluble cell-free assay mixture in greater than 96% enantiomeric excess, even though it is not the naturally occurring antipode present in Forsythia sp. But these soluble cell-free preparations do not engender stereoselective coupling; instead, racemic pinoresinols are first formed, catalysed by an H2O2-dependent peroxidase reaction. An enantiospecific NAD(P)H reductase then converts (+)- pinoresinol, and not the (-)-antipode, into (-)-secoisolariciresinol. Stereoselective syntheis of(+)-pinoresinol from E-coniferyl alcohol is, however, catalysed by an insoluble enzyme preparation in F. suspensa, obtained following removal of readily soluble and ionically bound enzymes; no exogenously supplied cofactors were required other than oxygen, although the reaction was stimulated by NAD-malate addition. Thus, the overall biochemical pathway to enantiomerically pure (-)-secoisolariciresinol has been delineated.

Katayama, Takeshi↗
NASA NTRS1998

Isothermal Fatigue, Damage Accumulation, and Life Prediction of a Woven PMC

This dissertation focuses on the characterization of the fully reversed fatigue behavior exhibited by a carbon fiber/polyimide resin, woven laminate at room and elevated temperatures. Nondestructive video edge view microscopy and destructive sectioning techniques were used to study the microscopic damage mechanisms that evolved. The residual elastic stiffness was monitored and recorded throughout the fatigue life of the coupon. In addition, residual compressive strength tests were conducted on fatigue coupons with various degrees of damage as quantified by stiffness reduction. Experimental results indicated that the monotonic tensile properties were only minimally influenced by temperature, while the monotonic compressive and fully reversed fatigue properties displayed noticeable reductions due to the elevated temperature. The stiffness degradation, as a function of cycles, consisted of three stages; a short-lived high degradation period, a constant degradation rate segment composing the majority of the life, and a final stage demonstrating an increasing rate of degradation up to failure. Concerning the residual compressive strength tests at room and elevated temperatures, the elevated temperature coupons appeared much more sensitive to damage. At elevated temperatures, coupons experienced a much larger loss in compressive strength when compared to room temperature coupons with equivalent damage. The fatigue damage accumulation law proposed for the model incorporates a scalar representation for damage, but admits a multiaxial, anisotropic evolutionary law. The model predicts the current damage (as quantified by residual stiffness) and remnant life of a composite that has undergone a known load at temperature. The damage/life model is dependent on the applied multiaxial stress state as well as temperature. Comparisons between the model and data showed good predictive capabilities concerning stiffness degradation and cycles to failure.

Gyekenyesi, Andrew L.↗
NASA NTRS1997

Meteorite Infall and Transport in Antarctica: An Analysis of Icefields as Accumulation Surfaces

Over 10,000 meteorite fragments have been collected on only a dozen or so small icefields in Antarctica. The terrestrial history of these meteorites is important, both from the perspective of the effects of their ambient environment on the meteorites themselves, and on the information that can be derived in relation to ice flow and ice stability over periods of time up to 1 million years. We discuss the relative importance of meteorite infall, and ice and aeolian transport in creating meteorite accumulations and the importance of ice and aeolian transport and weathering in removing meteorites at various icefields in Antarctica. The present analysis is confined to equibrated ordinary chondrites. We use the natural thermoluminescence (TL) to to examine the effects of weathering. Natural TL is used in combination with size analysis to gauge the effects of aeolian transport. Some icefields, especially the Lewis Cliff Ice Tongue, are dominated by wind-transported fragments, while others, including the Far Western field at Allan Hills, have lost fragments. It appears that most Antarctic icefields preserve meteorite collections on time scales of a few tens of thousands of years.

Benoit, P. H.↗
NASA NTRS1998

Room Temperature Tensile Behavior and Damage Accumulation of Hi-Nicalon Reinforced SiC Matrix Composites

Composites consisting of woven Hi-Nicalon fibers, BN interphases, and different SiC matrices were studied in tension at room temperature. Composites with SiC matrices processed by CVI and melt infiltration were compared. Monotonic and load/unload/reload tensile hysteresis experiments were performed. A modal acoustic emission (AE) analyzer was used to monitor damage accumulation during the tensile test. Post test polishing of the tensile gage sections was performed to determine the extent of cracking. The occurrence and location of cracking could easily be determined using modal AE. The loss of modulus could also effectively be determined from the change in the velocity of sound across the sample. Finally, the stresses where cracks appear to intersect the load-bearing fibers correspond with high temperature low cycle fatigue run out stresses for these materials.

Morscher, G. N.↗
NASA NTRS1999

Seasonal and Interannual Variations of Evaporation and their Relations with Precipitation, Net Radiation, and Net Carbon Accumulation for the Gediz Basin Area

A model combining the rate of carbon assimilation with water and energy balance equations has been run using satellite and ancillary data for a period of 60 months (January 1986 to December 1990). Calculations for the Gediz basin area give mean annual evaporation as 395 mm, which is composed of 45% transpiration, 42% soil evaporation and 13% interception. The coefficient of interannual variation of evaporation is found to be 6%, while that for precipitation and net radiation are, respectively, 16% and 2%, illustrating that net radiation has an important effect in modulating interannual variation of evaporation. The mean annual water use efficiency (i.e., the ratio of net carbon accumulation and total evaporation) is ca. 1 g/sq m/mm, and has a coefficient of interannual variation of 5%. A comparison of the mean water use efficiency with field observations suggests that evaporation over the area is utilized well for biomass production. The reference crop evaporation for irrigated areas has annual mean and coefficient of variation as, respectively, 1176 mm and 3%. The total evaporation during three summer months of peak evaporation (June-August) is estimated to be about 575 mm for irrigated crops like maize and cotton. Seasonal variations of the fluxes are presented.

Choudhury, Bhaskar J.↗
NASA NTRS1999

CO2 Accumulation in the Non-Conformal Helmet of the NASA Launch and Entry Suit During Simulated Unaided Egress

The Launch and Entry Suit (LES) has been worn by astronauts since 1988 for Space Shuttle launch and landing. Previous work indicated that carbon dioxide (CO2) accumulation in the LES non-conformal helmet might be high during locomotion while wearing the LES. The purpose of this study was to characterize the inspired CO2%, metabolic requirements, and egress performance during a simulation of an unaided egress from the Space Shuttle in healthy male subjects wearing the LES and walking on a treadmill. With the helmet visor closed, 12 male subjects completed a 6-min seated prebreathe with 100% O2 followed by a 2-min stand and 5 min of walking at 1.56 m/sec (5.6 km/h, 3.5 mph) as a simulation of unaided egress. All subjects walked with four different G-suit pressures (0.0, 0.5, 1.0, 1.5 psi). After a 10-min recovery, subjects walked 5 min with the same G-suit pressure and helmet visor open for the measurement of metabolic rate (VO2). When G-suit inflation levels were 1.0 or 1.5 psi, only 4 of our 12 healthy, non-micro-gravity exposed subjects completed the unaided egress. Inspired CO2 levels greater than 4% were routinely observed during walking. The metabolic cost at the 1.5 psi G-suit inflation was over 135% of the metabolic cost at 0.0 psi inflation. During unaided egress, G-suit inflation pressures of 1.0 (required inflation for missions greater than 11 days) and 1.5 psi resulted in elevated CO2 in the LES helmet and increased metabolic cost of walking, either of which could impact unaided egress by returning space flight crews.

Greenisen, M. C.↗
NASA NTRS1997

An Adaptive Method for Reducing Clock Skew in an Accumulative Z-Axis Interconnect System

This paper will present several methods for adjusting clock skew variations that occur in a n accumulative z-axis interconnect system. In such a system, delay between modules in a function of their distance from one another. Clock distribution in a high-speed system, where clock skew must be kept to a minimum, becomes more challenging when module order is variable before design.

Bolotin, Gary↗
NASA NTRS2000

Quantitative Estimation of Some Possible Errors Associated With TRMM GV Monthly Rain Maps and a Scheme for Spatial Averaging of Radar Accumulations

The Tropical Rainfall Measuring Mission (TRMM) Ground Validation (GV) rain products are generated from ground-based radar observations using a bulk adjusted FACE radar reflectivity (Ze) - rain rate (R) relationship. Monthly Ze-R relationships are obtained by extracting the Ze data with a horizontal resolution of 2 km from an altitude of 1.5 km (from Constant Altitude PPIS, CAPPIS) over the locations of the gauges. The gauge and radar data are merged, and a quality control procedure is applied that eliminates poorly correlated gauge-radar data. Bulk adjusted Ze-R relations are then derived from this quality-controlled merged data base. These Z-R relations are applied to the base scan reflectivity to produce rain maps. The present study examines the effect of these different planes on the total accumulations from the radar and the associated effect on the bulk adjustment coefficient. In order to evaluate the credibility of these GV products, the effect of the different planes involved in the bulk adjustment method will be discussed, The gauge data will also be used to assess the impact of missing radar data (i.e., data gaps) upon the monthly radar-derived rainfall estimates. Experiments were also performed varying both the area of the radar data extracted over the gauges and the use of different weighting coefficients. Preliminary results from these sensitivity tests indicate improved agreement and consistency between the gauge and radar data.

Datta, Saswati↗
NASA NTRS1999

Status of the Dust Accumulation and Removal Technology Experiment for the Mars 2001 Surveyor Lander

The Dust Accumulation and Removal Technology (DART) experiment is designed to quantify the nature of dust settling out of the Martian atmosphere. DART is part of the Mars in-situ propellant precursor (MIP) experiment which is a payload on the Mars 2001 Surveyor Lander. At the time of this writing, high fidelity development hardware has been integrated in to the MIP experiment and completed Mars environment testing. Additional information is contained in the original extended abstract.

Jenkins, P. P.↗
NASA NTRS1995

Explaining the Accumulation of Intercontinental Biomass Burning Pollution: High Versus Low Processes, Africa Versus South America, Cooking Versus Mixing

The intercontinental buildup of tropospheric ozone, carbon monoxide, and other pollutants over the South Atlantic has been attributed to biomass burning over distant continents. We address several of the large questions regarding the nature and budget of this buildup have remained: What is the role of turning In South America or various portions of Africa in this accumulation? What are the relative roles of shallow and deep convection for emplacing various compounds in the free troposphere? Can we understand the ozone budget? We report the first simulations of a three-dimensional pollutant transport model, (GRACES) transport which is driven by fully reconstructed meteorology for the TRACE-A/SAFARI period of 1992. Greater detail is provided by a two-dimensional, detailed-chemistry model of more restricted regions of Africa. We find a predominant role for African emissions affecting the Atlantic during this period. Boundary-layer venting via PBL convection tends to build the observed carbon monoxide column over the ocean, while deep cumulonimbus processes tend to explain rather more of the ozone column.

Chatfield, Robert B.↗