Search NASA⌕ Search

SEARCH · Search NASA

Results for “activation energies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The Diffusion Mechanism of Ge During Oxidation of Si/SiGe Nanofins

A recently discovered, enhanced Ge diffusion mechanism along the oxidizing interface of Si/SiGe nanostructures has enabled the formation of single-crystal Si nanowires and quantum dots embedded in a defect-free, single-crystal SiGe matrix. Here, we report oxidation studies of Si/SiGe nanofins aimed at gaining a better understanding of this novel diffusion mechanism. Here, a superlattice of alternating Si/Si 0.7 Ge 0.3 layers was grown and patterned into fins. After oxidation of the fins, the rate of Ge diffusion down the Si/SiO 2 interface was measured through the analysis of HAADF-STEM images. The activation energy for the diffusion of Ge down the sidewall was found to be 1.1 eV, which is less than one-quarter of the activation energy previously reported for Ge diffusion in bulk Si. Through a combination of experiments and DFT calculations, we propose that the redistribution of Ge occurs by diffusion along the Si/SiO 2 interface followed by a reintroduction into substitutional positions in the crystalline Si.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Zn acceptors in β-Ga 2 O 3 crystals

Electron paramagnetic resonance (EPR) is used to identify and characterize neutral zinc acceptors in Zn-doped β-Ga 2 O 3 crystals. Two EPR spectra are observed at low temperatures, one from Zn ions at tetrahedral Ga(1) sites (the $Zn$$^{0}_{Ga 1}$ acceptor) and one from Zn ions at octahedral Ga(2) sites (the $Zn$$^{0}_{Ga 2}$ acceptor). These Zn acceptors are small polarons, with the unpaired spin localized in each case on a threefold coordinated oxygen O(I) ion adjacent to the Zn ion. Resolved hyperfine interactions with neighboring 69 Ga and 71 Ga nuclei allow the EPR spectra from the two acceptors to be easily distinguished: $Zn$$^{0}_{Ga 1}$ acceptors interact equally with two Ga(2) ions and $Zn$$^{0}_{Ga 2}$ acceptors interact unequally with a Ga(1) ion and a Ga(2) ion. The as-grown crystals are compensated, with the Zn ions initially present as singly ionized acceptors ($Zn$$^{-}_{Ga 1}$ and $Zn$$^{-}_{Ga 2}$). Exposing a crystal to 325 nm laser light, while being held at 140 K, primarily produces neutral $Zn$$^{0}_{Ga 2}$ acceptors when photoinduced holes are trapped at $Zn$$^{-}_{Ga 2}$ acceptors. This suggests that there may be significantly more Zn ions at Ga(2) sites than at Ga(1) sites. Warming the crystal briefly to room temperature, after removing the light, destroys the EPR spectrum from the shallower $Zn$$^{0}_{Ga 2}$ acceptors and produces the EPR spectrum from the more stable $Zn$$^{0}_{Ga 1}$ acceptors. Furthermore, the $Zn$$^{0}_{Ga 2}$ acceptors decay in the 240–260 K region with a thermal activation energy near 0.65 eV, similar to $Mg$$^{0}_{Ga 2}$ acceptors, whereas the slightly deeper $Zn$$^{0}_{Ga 1}$ acceptors decay close to room temperature with an approximate thermal activation energy of 0.78 eV.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Role of Fast Dynamics in Conductivity of Polymerized Ionic Liquids

Polymerized ionic liquids (PolyILs) are promising candidates for a broad range of technologies. However, the relatively low conductivity of PolyILs at room temperature has strongly limited their applications. In this work, we provide new insights into the roles of various microscopic parameters controlling ion transport in these polymers, which are crucial for their rational design and practical applications. Using broadband dielectric spectroscopy and neutron and light scattering techniques, we found a clear connection between the activation energy for conductivity, fast dynamics, and high-frequency shear modulus in PolyILs at their glass transition temperature (T g ). In particular, our analysis reveals a correlation between conductivity and the amplitude of fast picosecond fluctuations at T g , suggesting the possible involvement of fast dynamics in lowering the energy barrier for ion conductivity. We also demonstrate that both the activation energy for ion transport and the amplitude of the fast fluctuations depend on the high-frequency shear moduli of PolyILs, thus identifying a practically important parameter for tuning conductivity. Finally, the parameters recognized in this work and their connection to the ionic conductivity of PolyILs set the stage for a deeper understanding of the mechanism of ion transport in PolyILs in the glassy state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Fracture mechanisms of sodium silicate glasses

Reactive classical molecular dynamics simulations of sodium silicate glasses, xNa 2 O–(100 – x)SiO 2 (x = 10–30), under quasi-static loading, were performed for the analysis of molecular scale fracture mechanisms. Mechanical properties of the sodium silicate glasses were consistent with experimentally reported values, and the amount of crack propagation varied with reported fracture toughness values. The most crack propagation occurred in NS20 systems (20-mol% Na 2 O) compared with the other simulated compositions. Dissipation via two mechanisms, the first through sodium migration as a lower activation energy process and the second through structural rearrangement as a higher activation energy process, was calculated and accounted for the energy that was not stored elastically or associated with the formation of new fracture surfaces. Here, a correlation between crack propagation and energy dissipation was identified, with systems with higher crack propagation exhibiting less energy dissipation. Sodium silicate glass compositions with lower energy dissipation also exhibited the most sodium movement and structural rearrangement within 10 Å of the crack tip during loading. Therefore, high sodium mobility near the crack tip may enable energy dissipation without requiring formation of structural defects. Therefore, the varying mobilities of the network modifiers near crack tips influence the brittleness and the crack growth rate of modified amorphous oxide systems.

36 MATERIALS SCIENCE↗
NASA NTRS1992

The structure of particle cloud premixed flames

The structure of premixed flames propagating in combustible systems containing uniformly distributed volatile fuel particles in an oxidizing gas mixture is analyzed. This analysis is motivated by experiments conducted at NASA Lewis Research Center on the structure of flames propagating in combustible mixtures of lycopodium particles and air. Several interesting modes of flame propagation were observed in these experiments depending on the number density and the initial size of the fuel particle. The experimental results show that steady flame propagation occurs even if the initial equivalence ratio of the combustible mixture based on the gaseous fuel available in the particles, phi sub u, is substantially larger than unity. A model is developed to explain these experimental observations. In the model, it is presumed that the fuel particles vaporize first to yield a gaseous fuel of known chemical composition which then reacts with oxygen in a one-step overall process. The activation energy of the chemical reaction is presumed to be large. The activation energy characterizing the kinetics of vaporization is also presumed to be large. The equations governing the structure of the flame were integrated numerically. It is shown that the interplay of vaporization kinetics and oxidation process can result in steady flame propagation in combustible mixtures where the value of phi sub u is substantially larger than unity. This prediction is in agreement with experimental observations.

Seshadri, K.↗
DOE OSTI2024

Real-Time Atomic-Scale Structural Analysis Resolves the Amorphous to Crystalline CaCO 3 Mechanism Controversy

Amorphous calcium carbonate (ACC) occurs as a precursor to geological and biogenic calcium carbonate (CaCO 3 ), yet its transformation pathways and reaction mechanisms remain inconsistent and controversial. In this study, we investigated the transformation of ACC to calcite under both solution and dry conditions, in the presence and absence of impurity ions, utilizing operando time-resolved synchrotron X-ray diffraction (TRXRD) and reactive transport modeling. Results demonstrate that TRXRD techniques allow us to differentiate dissolution-reprecipitation versus solid-state transformation mechanisms for amorphous to crystalline phase transitions. Specifically, we observe that in environments with abundant water, ACC transforms to calcite through a dissolution-reprecipitation mechanism. This features an activation energy of 63 ± 2 kJ/mol and unit cell volume contraction during calcite crystal growth. Conversely, under water-limited conditions, ACC to calcite transformation proceeds via a solid-state transformation mechanism, with an activation energy of 210 ± 2 kJ/mol, three times greater than the dissolution-reprecipitation route, and a unit cell expansion during crystalline calcite growth. Further, to illustrate the magnitude of these effects, the rates of calcite growth were similar during dissolution-reprecipitation at 3 °C [0.00207(35) s –1 ] and solid-state transformation at 280 °C [0.00134(11) s –1 ]. Moreover, the incorporation of an impurity, strontium, significantly retards the rate of calcite growth while expanding its unit cell but whose incorporation is history dependent. Reactive transport modeling of the dissolution–precipitation kinetics suggests that ACC must be dissolving as compact aggregates. These various transformation mechanisms drive diverse geological and biological carbonate formations, impacting their use as paleoenvironmental markers and functional materials synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High temperature nanoindentation of Cu–TiN nanolaminates

Here, we examined the high temperature indentation response of physical vapor deposited Cu–TiN multilayered nanocomposites with layer thicknesses ranging from 5 nm to 200 nm. A decrease in hardness with increasing temperature was observed, along with a strong correlation between the hardness and the nanometer-level TiN grain sizes, rather than layer thickness. The apparent activation energies calculated from the high temperature indentation experiments indicated that, for all but the smallest layer thicknesses, the deformation of copper in the nanolaminates dominate the plastic response in these composites. In the finest layer thicknesses, a decrease in the apparent activation energy value indicated possible co-deformation of Cu and TiN.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution

Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO 2 , Ce 0.92 Zr 0.08 O 2 , and Ce0.84Zr0.16O2 composed of 5–6 nm crystallites display Tm-CO 2 (the temperature at maximum CO 2 yield) at 383, 355, and 375°C under 10 vol.% O 2 /N 2 , respectively. Additionally, the size of agglomerate decreases from 165.5 to 51.9–57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O2- and O-) for soot oxidation. Thus, the activities of Ce 0.92 Zr 0.08 O 2 and Ce 0.84 Zr 0.16 O 2 in soot combustion are better than that of CeO2. Although oxygen vacancies promote the migration of lattice O 2- , the enriched surface Zr also inhibits the mobility of lattice O 2- . Therefore, the Tm-CO 2 of Ce 0.84 Zr 0.16 O 2 is higher than that of Ce 0.92 Zr 0.08 O 2 . Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

Hydrogen atom migration in the oxidation of aldehydes - O(3P) + H2CO

An ab initio study of hydrogen atom migration in methylenebis(oxy)H2CO2(3B2) to form triplet formic acid HCOOH (3A1) is reported. From HF, MCHF, and CI calculated energy barriers, the activation energy is estimated to be no less than 30 kcal/mol. It is concluded that the hydrogen migration channel is not accessible in recent room temperature experiments on the O(3P) + H2CO reaction.

Dupuis, M.↗
NASA NTRS1992

Energetics and structural properties of twist grain boundaries in Cu

Structural and energetics properties of atoms near a grain boundary are of great importance from theoretical and experimental standpoints. From various experimental work it is concluded that diffusion at low temperatures at polycrystalline materials take place near grain boundary. Experimental and theoretical results also indicate changes of up to 70 percent in physical properties near a grain boundary. The Embedded Atom Method (EAM) calculations on structural properties of Au twist grain boundaries are in quite good agreement with their experimental counterparts. The EAM is believed to predict reliable values for the single vacancy formation energy as well as migration energy. However, it is not clear whether the EAM functions which are fitted to the bulk properties of a perfect crystalline solid can produce reliable results on grain boundaries. One of the objectives of this work is to construct the EAM functions for Cu and use them in conjunction with the molecular static simulation to study structures and energetics of atoms near twist grain boundaries in Cu. This provides tests of the EAM functions near a grain boundary. In particular, we determine structure, single vacancy formation energy, migration energy, single vacancy activation energy, and interlayer spacing as a function of distance from grain boundary. Our results are compared with the available experimental and theoretical results from grain boundaries and bulk.

Karimi, Majid↗
NASA NTRS2003

Iron catalyst chemistry in modeling a high-pressure carbon monoxide nanotube reactor

The high-pressure carbon monoxide (HiPco) technique for producing single-wall carbon nanotubes (SWNTs) is analyzed with the use of a chemical reaction model coupled with flow properties calculated along streamlines, calculated by the FLUENT code for pure carbon monoxide. Cold iron pentacarbonyl, diluted in CO at about 30 atmospheres, is injected into a conical mixing zone, where hot CO is also introduced via three jets at 30 degrees with respect to the axis. Hot CO decomposes the Fe(CO)5 to release atomic Fe. Then iron nucleates and forms clusters that catalyze the formation of SWNTs by a disproportionation reaction (Boudouard) of CO on Fe-containing clusters. Alternative nucleation rates are estimated from the theory of hard sphere collision dynamics with an activation energy barrier. The rate coefficient for carbon nanotube growth is estimated from activation energies in the literature. The calculated growth was found be about an order of magnitude greater than measured, regardless of the nucleation rate. A study of cluster formation in an incubation zone prior to injection into the reactor shows that direct dimer formation from Fe atoms is not as important as formation via an exchange reaction of Fe with CO in FeCO.

Evaluation Studies↗
DOE OSTI2025

Self-Diffusivity Measurement of Eutectic F 7 LiNaK with and without Additives Using Quasi-Elastic Neutron Scattering

The atomic scale relaxation dynamics of eutectic F 7 LiNaK (46.5 LiF–11.5 NaF–42 KF mol %, Li-7 enriched) were measured using quasi-elastic neutron scattering (QENS) over a temperature range of 500–750 °C. Here, the effect of adding 0.988 mol % cerium, 0.499 mol % cesium, and 1.21 mol % zirconium individually to the dynamics of F 7 LiNaK was also investigated. The relaxation process in both pure and doped F 7 LiNaK molten salts was fit with a stretched exponential function and the temperature dependence follows an Arrhenius behavior over a wavevector transfer range of 0.4 Å –1 < Q < 0.9 Å –1 . The measured activation energy for self-diffusion is E a = 0.77 ± 0.02 eV/atom for pure molten F 7 LiNaK. The QENS response with additives added to F 7 LiNaK was also fit with a stretched exponential and the associated Arrhenius behavior was characterized with activation energies of E a = 0.88 ± 0.01 eV/atom for zirconium (1.21 mol %), E a = 1.02 ± 0.02 eV/atom for cerium (0.988 mol %), and E a = 0.71 ± 0.03 eV/atom for cesium (0.499 mol %). The measured diffusivities are compared to those simulated with a neural network force field model by Lee et al. [Lee, S.-C. Comparative Studies of the Structural and Transport Properties of Molten Salt FLiNaK Using the Machine-Learned Neural Network and Reparametrized Classical Forcefields. J. Phys. Chem. B 2021, 125(37), 10562–10570].

FLiNaK↗
DOE OSTI2020

Material Discovery and High Throughput Exploration of Ru Based Catalysts for Low Temperature Ammonia Decomposition

High throughput experimentation has the capability to generate massive, multidimensional datasets, allowing for the discovery of novel catalytic materials. Here, we show the synthesis and catalytic screening of over 100 unique Ru-Metal-K based bimetallic catalysts for low temperature ammonia decomposition, with a Ru loading between 1–3 wt% Ru and a fixed K loading of 12 wt% K, supported on γ-Al2O3. Bimetallic catalysts containing Sc, Sr, Hf, Y, Mg, Zr, Ta, or Ca in addition to Ru were found to have excellent ammonia decomposition activity when compared to state-of-the-art catalysts in literature. Furthermore, the Ru content could be reduced to 1 wt% Ru, a factor of four decrease, with the addition of Sr, Y, Zr, or Hf, where these secondary metals have not been previously explored for ammonia decomposition. The bimetallic interactions between Ru and the secondary metal, specifically RuSrK and RuFeK, were investigated in detail to elucidate the reaction kinetics and surface properties of both high and low performing catalysts. The RuSrK catalyst had a turnover frequency of 1.78 s−1, while RuFeK had a turnover frequency of only 0.28 s−1 under identical operating conditions. Based on their apparent activation energies and number of surface sites, the RuSrK had a factor of two lower activation energy than the RuFeK, while also possessing an equivalent number of surface sites, which suggests that the Sr promotes ammonia decomposition in the presence of Ru by modifying the active sites of Ru.

McCullough, Katherine (ORCID:0000000197525740)↗
DOE OSTI2020

Simulations of the Biodegradation of Citrate Based Polymers for Artificial Scaffolds Using Accelerated Reactive Molecular Dynamics

Here, we explore the reactivity and mechanical properties of poly(1,6-hexanediol-co-Citric acid) via ReaxFF molecular dynamics simulations. We implement an accelerated scheme within the ReaxFF framework to study the hydrolysis reaction of the polymer which is provided with sufficient amount of energy known as the restrain energy after a suitable pre-transition state configuration is obtained to overcome the activation energy barrier and the desired product is obtained. The validity of the ReaxFF force field is established by comparing the ReaxFF energy barriers of ester and ether hydrolysis with benchmark DFT values in literature. We perform chemical and mechanical degradation of polymer chain bundles at 300 K. We find that ester hydrolyzes faster than ether due to lower activation energy barrier of the reaction. The selectivity of the bond-boost scheme has been demonstrated by lowering the boost parameters of the accelerated simulation which almost stops the ether hydrolysis. Mechanical degradation of pre-hydrolyzed and intermittent hydrolyzed polymer bundles is performed along the longitudinal direction at two different strain rates. We find that the tensile modulus of the polymers are increases with increase in strain rates which shows that polymers show a strain dependent behavior. The tensile modulus of the Polyester-ether is higher than Polyester yet reaches yield-stress faster than Polyester. This makes Polyester more ductile than Polyester-ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Validation of the Cossee–Arlman mechanism for propylene oligomerization on Ni/UiO-66

Steady state rate expressions can be derived to distinguish the Cossee–Arlman and metallacycle mechanisms postulated for propylene oligomerization on nickel-based catalysts based on product selectivities, where product selectivities for the former are a function of olefin pressure because sequential coordination and insertion steps lead to independent mechanistic pathways for different hexene isomers. In contrast, the metallacycle mechanism presents pressure-independent product selectivities due to successive coordination prior to the kinetically relevant steps in each mechanism. In this work, steady state propylene oligomerization rates and selectivities were measured in the absence of an activator on nickel functionalized UiO-66 metal organic framework (MOF), Ni/UiO-66, to validate the Cossee–Arlman mechanism for light olefin oligomerization. In situ NO titrations reveal that ~5% of nickel sites were active during the reaction, and thus, not all nickel sites are relevant for catalysis. Propylene dimerization was first order in propylene pressure from 5 to 500 kPa with an apparent activation energy of ~20 kJ mol -1 from 453 to 493 K. Calculated apparent activation energies with density functional theory (DFT) calculations on cluster models of Ni/UiO-66 are in agreement with experiment to corroborate the Cossee–Arlman mechanism. Selectivities of hexene products and the ratio of hexene product selectivities on Ni/UiO-66 are in accordance with selectivity expressions derived from the Cossee–Arlman mechanism. In conclusion, analysis of product selectivities can be used more extensively to demarcate the Cossee–Arlman and metallacycle mechanisms for olefin oligomerization on metal-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Peculiarities of CsPbBr3 perovskites melting in quasi-equilibrium conditions

The melting behavior of CsPbBr3 perovskite was studied by differential thermal analysis (DTA). It was found that melting of CsPbBr3 occurs non-isothermally in the temperature range of 561-570 °C. From the temperature dependence of the solid-phase melting rate, it was established that at 567±1 °C the change in the mechanism of the solid-phase melting goes from fragmentation to dissolution at the surface. The obtained values of the activation energy of the melting of the solid phase in CsPbBr3 show that the activation energy of the dissolution of the solid-phase fragments is 4 times greater than the energy of the fragmentation of the solid phase.

Kopach, O.↗
NASA NTRS1973

Chemistry in interstellar space

The particular characteristics of chemistry in interstellar space are determined by the unique environmental conditions involved. Interstellar matter is present at extremely low densities. Large deviations from thermodynamic equilibrium are, therefore, to be expected. A relatively intense ultraviolet radiation is present in many regions. The temperatures are in the range from 5 to 200 K. Data concerning the inhibiting effect of small activation energies in interstellar clouds are presented in a table. A summary of measured activation energies or barrier heights for exothermic exchange reactions is also provided. Problems of molecule formation are discussed, taking into account gas phase reactions and surface catalyzed processes.

Donn, B.↗
NASA NTRS1985

Elevated temperature creep-rupture behavior of the single crystal nickel-base superalloy NASAIR 100

The creep and rupture behavior of 001-line-oriented single crystals of the nickel-base superalloy NASAIR 100 was investigated at temperatures of 925 and 1000 C. In the stress and temperature ranges studied, the steady state creep rate, time to failure, time to the onset of secondary creep, and the time to the onset of tertiary creep all exhibited power law dependencies on the applied stress. The creep rate exponents for this alloy were between seven and eight, and the modulus-corrected activation energy for creep was approximately 350 kjoule/mole, which was comparable to the measured activation energy for Ostwald ripening of the gamma-prime precipitates. Oriented gamma-prime coarsening to form lamellae perpendicular to the applied stress was very prominent during creep. At 1000 C, the formation of a continuous gamma-gamma-prime lamellar structure was completed during the primary creep stage. Shear through the gamma-gamma-prime interface is considerd to be the rate limiting step in the deformation process. Gradual thickening of the lamellae appeared to be the cause of the onset of tertiary creep. At 925 C, the fully developed lamellar structure was not achieved until the secondary or tertiary creep stages. At this temperature, the gamma-gamma-prime lamellar structure did not appear to be as beneficial for creep resistance as at the higher temperature.

Nathal, M. V.↗