Search NASA⌕ Search

SEARCH · Search NASA

Results for “admissibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Program of Research in Aeronautics

A prospectus of the educational and research opportunities available at the Joint Institute for Advancement of Flight Sciences, operated at NASA Langley Research Center in conjunction with George Washington University's School of Engineering and Applied Sciences is presented. Requirements of admission to various degree programs are given as well as the course offerings in the areas of acoustics, aeronautics, environmental modelling, materials science, and structures and dynamics. Research facilities for each field of study are described. Presentations and publications (including dissertations and theses) generated by each program are listed as well as faculty members visting scientists and engineers.

Source record↗
NASA NTRS1981

Liquid oxygen turbopump technology

A small, high-pressure, LOX turbopump was designed, fabricated and tested. The pump is a single-stage centrifugal type with power to the pump supplied by a single-stage partial-admission axial-impulse turbine. Design conditions included an operating speed of 7330 rad/s (70,000 rpm), pump discharge pressure of 2977 N/sqcm (4318 psia), and a pump flowrate of 16.4 Kg/s (36.21 lb/s). The turbopump contains a self-compensating axial thrust balance piston to eliminate axial thrust loads on the bearings during steady-state operation. Testing of the turbopump was achieved usng a gaseous hydrogen high-pressure flow to drive the turbine, which generally is propelled by LOX/LH2 combustion products, at 1041K (1874 R) inlet temperature and at a design pressure ratio of 1.424. Test data obtained with the turbopump are presented which include head-flow-efficiency performance, suction performance, balance piston performance and LOX seal performance. Mechanical performance of the turbopump is also discussed.

Nielson, C. E.↗
NASA NTRS1982

Analytical performance prediction for large antennas

The coupled free-free modes of the 55M LMSS antenna configuration are shown. They were determined using modal synthesis. Reflector modes clamped at the hub were calculated adopting the efficient cyclic symmetry technique. Similarly, clamped hub modes of the offset boom structure were calculated. The modes of the two substructures were then combined through the process of modal synthesis on the assumption that the interface at the hub structure is rigid thus satisfying statically determinate matching conditions. For attitude control purposes, only modes associated with symmetric components zero and one involve net motions of the center of gravity of the reflector. This condition restricts the set of admissible eigenfunctions for modal synthesis. Modes with symmetric components higher than one are excited only by forces acting on the ribs. These modes are totally uncoupled from the boom dynamics.

El-Raheb, M.↗
NASA NTRS1982

Systematic generation of nonlinear discretized dynamic equilibrium equations of spinning cantilevers

General nonlinear discretized governing equations of motion of spinning elastic solids and structures are adjusted for the case of a spinning cantilever with initial geometric imperfections. Consideration is given to second degree nonlinearities in the strain-displacement and velocity-displacement relationships. Parameters of the discretization are developed to include the type and number of the coordinate functions used in the admissible trial solution in order to unify the discretization approaches associated with stationarity principles. The coordinate functions comprise both sets of continuous and piecewise continuous functions employed in the Rayleigh-Ritz and the finite element methods, respectively. Coefficient matrices are provided which contain the energy density expressions and which are adaptable to computer programming.

El-Essawi, M.↗
NASA NTRS1983

Nonlinear equations of dynamics for spinning paraboloidal antennas

The nonlinear strain-displacement and velocity-displacement relations of spinning imperfect rotational paraboloidal thin shell antennas are derived for nonaxisymmetrical deformations. Using these relations with the admissible trial functions in the principle functional of dynamics, the nonlinear equations of stress inducing motion are expressed in the form of a set of quasi-linear ordinary differential equations of the undetermined functions by means of the Rayleigh-Ritz procedure. These equations include all nonlinear terms up to and including the third degree. Explicit expressions are given for the coefficient matrices appearing in these equations. Both translational and rotational off-sets of the axis of revolution (and also the apex point of the paraboloid) with respect to the spin axis are considered. Although the material of the antenna is assumed linearly elastic, it can be anisotropic.

Utku, S.↗
NASA NTRS1984

A hydromagnetic model of corotating conductive solar wind streams

Under the assumption of quasi-azimuthal symmetry the governing equations of a steady hydromagnetic flow in a thermally conductive flux tube possess six invariants. Four of them represent constancy of mass efflux, energy efflux, angular momentum efflux and magnetic flux. Based on the entropy equation we obtain useful approximation in explicit expressions for the two remaining invariants. One of them provides the constraint which determines the compatible heat flux to ensure a vanishing pressure at infinity. Thus, the admissible solution that represents a corotating solar wind stream in terms of specified interplanetary condition can be calculated by an algebraic method, without the necessity of numerical integration. A two-point relationship is then derived, which correlates the solar wind properties at two separated interplanetary sites measured at two properly separated instants. This relationship may be applied to observational data from spacecraft and earth-bound satellites to discern the corotation feature in the solar wind.

Yeh, T.↗
NASA NTRS1983

Effective use of remote sensing products in litigation

A boiled-down version of major legal principles affecting the admissibility of data and products from remote sensing devices is presented. It is suggested that enhancements or classifications of digital data (from scanning devices or from digitized aerial photography) be proffered as evidence in a fashion similar to the manner in which maps from photogrammetric techniques are introduced as evidence. Every effort should be made to illucidate the processes by which digital data are analytically treated or manipulated. Remote sensing expert witnesses should be practiced in providing concise and clear explanations of both data and methods. Special emphasis should be placed on being prepared to provide a detailed accounting of steps taken to calibrate and verify spectral characteristics with ground truth.

Jaynes, R. A.↗
NASA NTRS1985

A Galerkin method for the estimation of parameters in hybrid systems governing the vibration of flexible beams with tip bodies

An approximation scheme is developed for the identification of hybrid systems describing the transverse vibrations of flexible beams with attached tip bodies. In particular, problems involving the estimation of functional parameters are considered. The identification problem is formulated as a least squares fit to data subject to the coupled system of partial and ordinary differential equations describing the transverse displacement of the beam and the motion of the tip bodies respectively. A cubic spline-based Galerkin method applied to the state equations in weak form and the discretization of the admissible parameter space yield a sequence of approximating finite dimensional identification problems. It is shown that each of the approximating problems admits a solution and that from the resulting sequence of optimal solutions a convergent subsequence can be extracted, the limit of which is a solution to the original identification problem. The approximating identification problems can be solved using standard techniques and readily available software.

Banks, H. T.↗
NASA NTRS1983

Several specific and nonspecific responses of the human and animal body to ship noise

The effect of noise on cargo boats on a long voyage differs considerably from the effect of noise in factories and in service industries. The peculiarities of the effect of round-the-clock noises at sea at 55 to 85 decibels, typical for cargo boats, were studied in white rats in the laboratory and aboard ship (each of the experiments lasted three months) and in young naval cadets and experienced seamen on voyages lasting one, two, and three months. The findings helped to derive health standards for maximum admissible noise level at sea.

Markaryan, S. S.↗
NASA NTRS1985

Optimization of Controlled Structures

A formulation is presented for the coupled optimal design of a structural system and its control by defining a composite objective function as a linear combination of two components: a structural objective and a control objective. For the case when the structural objective is a function of the structural design variables only, and when the control objective is represented by the quadratic functional of the response and control energy, one can analytically express the optimal control in terms of any set of admissible structural design variables. The expression for the optimal control is used recursively in an iterative Newton-Raphson search scheme, the goal of which is to determine a corresponding optimal set of structural design variables that minimize the composite objective function. A numerical example is given to illustrate the computational procedure.

Salama, M.↗
NASA NTRS1985

A new method of differential structural analysis of gamma-family basic parameters

The maximum likelihood method is used for the first time to restore parameters of electron photon cascades registered on X-ray films. The method permits one to carry out a structural analysis of the gamma quanta family darkening spots independent of the gamma quanta overlapping degree, and to obtain maximum admissible accuracies in estimating the energies of the gamma quanta composing a family. The parameter estimation accuracy weakly depends on the value of the parameters themselves and exceeds by an order of the values obtained by integral methods.

Melkumian, L. G.↗
NASA NTRS1984

Number and placement of control system components considering possible failures

One of the first questions facing the designer of the control system for a large space structure is how many components actuators and sensors - to specify and where to place them on the structure. This paper presents a methodology which is intended to assist the designer in making these choices. A measure of controllability is defined which is a quantitative indication of how well the system can be controlled with a given set of actuators. Similarly, a measure of observability is defined which is a quantitative indication of how well the system can be observed with a given set of sensors. Then the effect of component unreliability is introduced by computing the average expected degree of controllability (observability) over the operating lifetime of the system accounting for the likelihood of various combinations of component failures. The problem of component location is resolved by optimizing this performance measure over the admissible set of locations. The variation of this optimized performance measure with number of actuators (sensors) is helpful in deciding how many components to use.

Vander Velde, W. E.↗
NASA NTRS1985

Elastic properties of woven fabric reinforced composites

An analytical model for the realistic representation of a woven fabric reinforced composite is presented in this paper. The approach uses a variable cross-section geometric model in order to achieve geometric compatibility at the yarn cross-over regions. Admissible displacement and stress fields are used to determine bounds on the fabric elastic properties. The approach adopted enables the determination of the complete three-dimensional woven fabric composite properties. The in-plane fabric properties obtained through this approach have been compared with results obtained from other approaches existing in the literature. Also, comparisons made with available experimental data indicate good agreement.

Ramnath, V.↗
NASA NTRS1985

Small centrifugal pumps for low thrust rockets

This paper presents the results of a combined analytical and experimental investigation of low specific speed pumps for potential use as components of propellant feed systems for low thrust rocket engines. Shrouded impellers and open face impellers were tested in volute type and vaned diffuser type pumps. Full- and partial-emission diffusers and full- and partial-admission impellers were tested. Axial and radial loads, head and efficiency versus flow, and cavitation tests were conducted. Predicted performance of two pumps are compared when pumping water and liquid hydrogen. Detailed pressure loss and parasitic power values are presented for two pump configurations. Partial-emission diffusers were found to permit use of larger impeller and diffuser passages with a minimal performance penalty. Normal manufacturing tolerances were found to result in substantial power requirement variation with only a small pressure rise change. Impeller wear ring leakage was found to reduce pump pressure rise to an increasing degree as the pump flowrate was decreased.

Gulbrandsen, N. C.↗
NASA NTRS1985

Endocrine and fluid metabolism in males and females of different ages after bedrest, acceleration and lower body negative pressure

Space shuttle flight simulations were conducted to determine the effects of weightlessness, lower body negative pressure (LBNP), and acceleration of fluid and electrolyte excretion and the hormones that control it. Measurements were made on male and female subjects of different ages before and after bedrest. After admission to a controlled environment, groups of 6 to 14 subjects in the age ranges 25 to 35, 35 to 45, 45 to 55 to 65 years were exposed to +3 G sub z for 15 minutes (G1) and to LBNP (LBNP1) on different days. On 3 days during this prebedrest period, no tests were conducted. Six days of bedrest followed, and the G sub z (G2) and LBNP (LBNP2) tests were run again. Hormones, electrolytes, and other parameters were measured in 24-hour urine pools throughout the experiment. During bedrest, cortisol and aldosterone excretion increased. Urine volume decreased, and specific gravity and osmolality increased. Urinary electrolytes were statistically unchanged from levels during the non-stress control period. During G2, cortisol increased significantly over its control and bedrest levels. Urine volume, sodium, and chloride were significantly lower; specific gravity and osmolality were higher during the control period or bedrest. The retention of fluids and electrolytes after +G sub z may at least partially explain decreased urine volume and increased osmolality observed during bedrest in this study. There were some who indicated that space flight would not affect the fluid and electrolyte metabolism of females or older males any more severely than it has affected that of male astronauts.

Leach, C. S.↗
NASA NTRS1986

Time-based air traffic management using expert systems

A prototype expert system was developed for the time scheduling of aircraft into the terminal area. The three functions of the air traffic control schedule advisor are as follows: first, for each new arrival, it develops an admissible flight plan for that aircraft. Second, as the aircraft progresses through the terminal area, it monitors deviations from the flight plan and provides advisories to return the aircraft to its assigned schedule. Third, if major disruptions such as missed approaches occur, it develops a revised plan. The advisor is operational on a Symbolics 3600, and is programed in MRS (a logic programming language), Lisp, and FORTRAN.

Tobias, L.↗
NASA NTRS1986

Small centrifugal pumps for low-thrust rocket engines

Six small, low specific speed centrifugal pump configurations were designed, fabricated, and tested. The configurations included shrouded, and 25 and 100% admission open face impellers with 2 inch tip diameters; 25, 50, and 100% emission vaned diffusers; and volutes with conical exits. Impeller tip widths varied from 0.030 inch to 0.052 inch. Design specific speeds (N sub s = RPM*GPM**0.5.FT**0.75) were 430 (four configurations) and 215 (two configurations). The six configurations were tested with water as the pumped fluid. Noncavitating performance results are presented for the design speed of 24,500 rpm over a flowrate range from 1 to 6 gpm for the N sub s = 430 configurations and test speeds up to 29,000 rpm over a flowrate range from 0.3 to 1.2 gpm for the N sub s = 215 configurations. Cavitating performance results are presented over a flowrate range from 60 to 120% of design flow. Fabrication of the small pump conponents is also discussed.

Furst, R. B.↗
NASA NTRS1986

Knowledge-based load leveling and task allocation in human-machine systems

Conventional human-machine systems use task allocation policies which are based on the premise of a flexible human operator. This individual is most often required to compensate for and augment the capabilities of the machine. The development of artificial intelligence and improved technologies have allowed for a wider range of task allocation strategies. In response to these issues a Knowledge Based Adaptive Mechanism (KBAM) is proposed for assigning tasks to human and machine in real time, using a load leveling policy. This mechanism employs an online workload assessment and compensation system which is responsive to variations in load through an intelligent interface. This interface consists of a loading strategy reasoner which has access to information about the current status of the human-machine system as well as a database of admissible human/machine loading strategies. Difficulties standing in the way of successful implementation of the load leveling strategy are examined.

Chignell, M. H.↗