Search NASA⌕ Search

SEARCH · Search NASA

Results for “aircraft sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Oceanographic biooptical profiling system

A new oceanographic instrument to measure underwater optical, biological, and physical properties has been designed, built, and used extensively at sea. The new instrument system is a significant advance that permits optimum sampling strategies using ship, aircraft, and satellite optical sensors for ocean research. The design criteria for the biooptical profiling system included the rapid acquisition of data to accommodate shipboard synoptic sampling; the measurement of the necessary parameters for providing appropriate contemporaneous surface data for remote sensors; the compatibility of the data acquisition system with conventional conductivity temperature depth-type cables and winches on the oceanographic fleet; the capability of real-time display of data along with rapid preliminary data reduction at sea. The primary instrument package in this profiling system is a new microprocessor controlled multiwavelength spectroradiometer. A description of the instrument and examples of data are presented.

Smith, R. C.↗

General Aviation Aircraft Reliability Study

This reliability study was performed in order to provide the aviation community with an estimate of Complex General Aviation (GA) Aircraft System reliability. To successfully improve the safety and reliability for the next generation of GA aircraft, a study of current GA aircraft attributes was prudent. This was accomplished by benchmarking the reliability of operational Complex GA Aircraft Systems. Specifically, Complex GA Aircraft System reliability was estimated using data obtained from the logbooks of a random sample of the Complex GA Aircraft population.

Pettit, Duane↗

Laboratory Studies of Cometary Materials - Continuity Between Asteroid and Comet

Laboratory analysis of cometary samples have been enabled by collection of cometary dust in the stratosphere by high altitude aircraft and by the direct sampling of the comet Wild‐2 coma by the NASA Stardust spacecraft. Cometary materials are composed of a complex assemblage of highly primitive, unprocessed interstellar and primordial solar system materials as well as a variety of high temperature phases that must have condensed in the inner regions of the protoplanetary disk. These findings support and contradict conclusions of comet properties based solely on astronomical observations. These sample return missions have instead shown that there is a continuity of properties between comets and asteroids, where both types of materials show evidence for primitive and processed materials. Furthermore, these findings underscore the importance and value of direct sample return. There will be great value in comparing the findings of the Stardust cometary coma sample return mission with those of future asteroid surface sample returns OSIRIS‐REx and Hayabusa II as well as future comet nucleus sample returns.

Messenger, Scott↗

Evaluation of Convective Transport in the GEOS-5 Chemistry and Climate Model

The NASA Goddard Earth Observing System (GEOS-5) Chemistry and Climate Model (CCM) consists of a global atmospheric general circulation model and the combined stratospheric and tropospheric chemistry package from the NASA Global Modeling Initiative (GMI) chemical transport model. The subgrid process of convective tracer transport is represented through the Relaxed Arakawa-Schubert parameterization in the GEOS-5 CCM. However, substantial uncertainty for tracer transport is associated with this parameterization, as is the case with all global and regional models. We have designed a project to comprehensively evaluate this parameterization from the point of view of tracer transport, and determine the most appropriate improvements that can be made to the GEOS-5 convection algorithm, allowing improvement in our understanding of the role of convective processes in determining atmospheric composition. We first simulate tracer transport in individual observed convective events with a cloud-resolving model (WRF). Initial condition tracer profiles (CO, CO2, O3) are constructed from aircraft data collected in undisturbed air, and the simulations are evaluated using aircraft data taken in the convective anvils. A single-column (SCM) version of the GEOS-5 GCM with online tracers is then run for the same convective events. SCM output is evaluated based on averaged tracer fields from the cloud-resolving model. Sensitivity simulations with adjusted parameters will be run in the SCM to determine improvements in the representation of convective transport. The focus of the work to date is on tropical continental convective events from the African Monsoon Multidisciplinary Analyses (AMMA) field mission in August 2006 that were extensively sampled by multiple research aircraft.

Pickering, Kenneth E.↗

Hemispheric Airborne Measurements of Air Quality (HAMAQ)

Under NASA’s Earth Venture Suborbital program, Hemispheric Airborne Measurements of Air Quality (HAMAQ) will conduct a series of campaigns in 2028 under the Tropospheric Emissions: Monitoring of Pollution (TEMPO) geostationary satellite instrument. HAMAQ plans include two deployments, including the Mexico City megalopolis and another North American site yet to be selected. The effort will include two aircraft, NASA’s B777 for in situ sampling and G-III for remote sensing. These aircraft will be used to complete a system of integrated observations, combining satellite observations, ground-based monitoring and research observations with air quality modeling. HAMAQ field intensives will serve multiple objectives to include: improving the use of satellite observations in concert with traditional ground monitoring to inform air quality; assessing emissions to better understand their timing and source apportionment; advancing the development of satellite proxies for air quality; and assessing the factors controlling local air quality in each location sampled. Given the long lead time for this campaign, this poster welcomes discussion from the community on strategies and candidate sites for the second deployment. Given the broad applicability of the HAMAQ science objectives and observing strategy, possible partnerships to extend the pursuit of the larger vision of HAMAQ to also sample in Asia and Europe are of interest.

James H Crawford↗

Airborne Observations of Aerosol Emissions from F-16 Aircraft

We presented results from the SASS Near-Field Interactions Flight (SNIF-III) Experiment which was conducted during May and June 1997 in collaboration with the Vermont and New Jersey Air National Guard Units. The project objectives were to quantify the fraction of fuel sulfur converted to S(VI) species by jet engines and to gain a better understanding of particle formation and growth processes within aircraft wakes. Size and volatility segregated aerosol measurements along with sulfur species measurements were recorded in the exhaust of F-16 aircraft equipped with F-100 engines burning fuels with a range of fuel S concentrations at different altitudes and engine power settings. A total of 10 missions were flown in which F-16 exhaust plumes were sampled by an instrumented T-39 Sabreliner aircraft. On six of the flights, measurements were obtained behind the same two aircraft, one burning standard JP-8 fuel and the other either approximately 28 ppm or 1100 ppm S fuel or an equal mixture of the two (approximately 560 ppm S). A pair of flights was conducted for each fuel mixture, one at 30,000 ft altitude and the other starting at 35,000 ft and climbing to higher altitudes if contrail conditions were not encountered at the initial flight level. In each flight, the F-16s were operated at two power settings, approx. 80% and full military power. Exhaust emissions were sampled behind both aircraft at each flight level, power setting, and fuel S concentration at an initial aircraft separation of 30 m, gradually widening to about 3 km. Analyses of the aerosol data in the cases where fuel S was varied suggest results were consistent with observations from project SUCCESS, i.e., a significant fraction of the fuel S was oxidized to form S(VI) species and volatile particle emission indices (EIs) in comparably aged plumes exhibited a nonlinear dependence upon the fuel S concentration. For the high sulfur fuel, volatile particle EIs in 10-second-old-plumes were 2 to 3 x 10 (exp 17) / kg of fuel burned and exhibited no obvious trend with engine power setting or flight altitude. In contrast, about 8-fold fewer particles were observed in similarly aged plumes from the same aircraft burning fuel with 560 ppm S content and EIs of 1 x 10(exp 15)/ kg of fuel burned were observed in the 28 ppm S fuel case. Moreover, data recorded as a function of plume age indicates that formation and growth of the volatile particles proceeds more slowly as the fuel S level is reduced. For example, ultrafine particle concentrations appear to stabilize within 5 seconds after emission in the 1100 ppm S cases but are still increasing in 20-second old plumes produced from burning the 560 ppm S fuel.

Anderson, B. E.↗

Analysis of Ice Nucleating Aerosol Measurements during SUCCESS: April, May 1996

This section describes our research activities during year three of this effort. In the second year, preliminary archive data sets were submitted to the SUCCESS archive. After additional analyses, final versions were prepared and submitted. These are included on the SUCCESS CD-ROM data editions that were recently released by NASA Ames. Over the range of temperature and supersaturation conditions of our measurements (15 to -40 C, and from ice saturation to approximately 15% water supersaturation), IN concentrations ranged from less than 0.1 to approximately 500 per liter, being generally greater at colder temperatures and higher supersaturations. To estimate the potential of aircraft exhaust as a source of IN, we examined data from six days of the field project when the DC-8 was following closely behind other humidity conditions of our measurements. In April 1997, a microphysical workshop was convened at NCAR to select cases for in depth analyses and to address questions about the consistency of cloud ice crystal measurements (size distributions and mass concentrations) and aerosol size distributions. We attended this meeting and contributed to the discussions. A particular concern was identified in the CN measurements. On the DC-8, CN measurements were obtained by four different investigator groups, using commercially available instrumentation. The DC-8 SUCCESS CN data showed long periods where the measurements were in substantial agreement, but there were also periods with large discrepancies. Several possible factors were identified that could help explain these discrepancies, including minimum detectable particle size, response at reduced pressures, and location of sample inlet on the aircraft.

Rogers, D. C.↗

Summertime photochemistry of the troposphere at high northern latitudes

Budgets of O3, NO(x), and NO(y), and acetic acid in the Arctic Boundary Layer Expedition (ABLE 3A) flight region are constructed using photochemical model statistics based on aircraft observations. A Lagrangian model is used to reconstruct the photochemical history of two aged biomass fire plumes sampled by the ABLE 3A aircraft. It is shown that anthropogenic influence on O3 levels in the Arctic may manifest itself not by long-range transport of pollution-derived O3, but rather by a decrease of the regional photochemical sink due to the presence of small amounts of NO(x). The low concentrations of NO(x) measured in ABLE 3A were sufficient to reduce the rate of photochemical loss appreciably relative to a NO(x)-free atmosphere, thus increasing the O3 lifetime. It is shown that decomposition of PAN can account for most of the NO(x) measured below 4-km altitude, but for only 20 percent at 6-km altitude. A lifetime of 29 days is estimated for NO(y) in the ABLE 23A flight region.

Jacob, D. J.↗

Ice crystal terminal velocities

Terminal velocities of different ice crystal forms were calculated using the most recent ice crystal drag coefficients, aspect ratios, and densities. The equations derived were primarily for use in calculating precipitation rates by sampling particles with an aircraft in cirrus clouds, and determining particle size in cirrus clouds by Doppler radar. However, the equations are sufficiently general for determining particle terminal velocity at any altitude, and most any crystal type. Two sets of equations were derived. The general equations provide a good estimate of terminal velocities at any altitude. The specific equations are a set of equations for ice crystal terminal velocities at 1000 mb. The calculations are in good agreement with terminal velocity measurements. The results from the present study were also compared to prior calculations by others and seem to give more reasonable results, particularly at higher altitudes.

Heymsfield, A.↗

Ice crystal terminal velocities.

Terminal velocities of different ice crystal forms were calculated, using the most recent ice crystal drag coefficients, aspect ratios, and densities. The equations derived were primarily for use in calculating precipitation rates by sampling particles with an aircraft in cirrus clouds, and determining particle size in cirrus clouds by Doppler radar. However, the equations are sufficiently general for determining particle terminal velocity at any altitude, and almost any crystal type. Two sets of equations were derived. The 'general' equations provide a good estimate of terminal velocities at any altitude. The 'specific' equations are a set of equations for ice crystal terminal velocities at 1000 mb. The calculations are in good agreement with terminal velocity measurements. The results from the present study were also compared to prior calculations by others and seem to give more reasonable results, particularly at higher altitudes.

Heymsfield, A.↗

Improvements to the SADSAM computer program for aeroelasticity analysis

A computer program for calculating the elastic element forces and strain energy distribution for normal mode shapes is presented. The subjects discussed are: (1) revised aerodynamic force representation, (2) flap aerodynamics, (3) chordwise motions and aerodynamic forces, (4) wing-tail interaction, and (5) gust analysis. An aircraft configuration used in sample gust analysis is included.

Schwendler, R. G.↗

An ad hoc map evaluation procedure

An ad hoc map evaluation procedure is proposed which is most suitable for evaluating low-resolution classification maps against high resolution ground truth maps, such as maps against interpreted aircraft photographs. Commonly practiced sampling and evaluation procedures are impracticable in this context because of difficulties in registration and in comparing the samples. This ad hoc procedure is designed to overcome these two major problems, and its practicability is discussed. Two widely accepted parameters are estimated by the new procedure; namely, the probability of correct classification and the proportion biases. Statistical qualifications are also provided.

Kan, E. P.↗

On the origin of extraterrestrial stratospheric particles: Interplanetary dust or meteor ablation debris?

Meteor ablation debris was distinguished from unablated interplanetary dust in a collection of extraterrestrial particles collected in the stratosphere using NASA U-2 aircraft. A 62 g sample of the Murchison (C2) meteorite was artificially ablated to characterize ablation debris for comparison with the stratospheric particles. By using proper experimental conditions, artificial ablation debris can be produced that is similar to natural ablation debris. Analyses of natural fusion crusts, artificial fusion crust, and artificial ablation debris of the Murchison meteorite produced criteria for recognizing debris ablated by a primitive meteoroid. Ninety-five percent of the stratospheric particles can be described as either ablation debris from a primitive meteoroid, or as very primitive interplanetary dust.

Kyte, F. T.↗

Sulfate and nitrate mixing ratios in the vicinity of the tropopause

Measurements of sulfate and nitrate in filter samples made during the Global Atmospheric Sampling Program (GASP) from aircraft flying near the tropopause over a period of 28 months beginning in early 1976 are presented. Sulfate and nitrate mixing ratios show a peak near or just above the tropopause during the winter-spring seasons. No peak is evident for sulfate during the summer-fall seasons. The sulfate mixing ratios show a constant average level in 1977-78 of 0.12 + or 0.04 ppbm above the tropopause and 0.05 + or - 0.04 ppbm below the tropopause with higher levels in the spring. Nitrate levels are similar but exhibit greater variability. Correlations between sulfate and nitrate (r = 0.78) and between sulfate and nitrate, on ozone (r = 0.80, 0.78) suggest a predominately stratospheric source for these species.

Lezberg, E. A.↗

Near-field noise prediction for aircraft in cruising flight: Methods manual

Methods for predicting noise at any point on an aircraft while the aircraft is in a cruise flight regime are presented. Developed for use in laminar flow control (LFC) noise effects analyses, they can be used in any case where aircraft generated noise needs to be evaluated at a location on an aircraft while under high altitude, high speed conditions. For each noise source applicable to the LFC problem, a noise computational procedure is given in algorithm format, suitable for computerization. Three categories of noise sources are covered: (1) propulsion system, (2) airframe, and (3) LFC suction system. In addition, procedures are given for noise modifications due to source soundproofing and the shielding effects of the aircraft structure wherever needed. Sample cases, for each of the individual noise source procedures, are provided to familiarize the user with typical input and computed data.

Tibbetts, J. G.↗

Remote sensing analysis of water quality in the San Francisco Bay-delta

Water quality parameters in the San Francisco Bay-delta area using remotely sensed data combined with in situ data are investigated. The parameters included suspended solids, chlorophyll, turbidity, and electrical conductivity; the ocean color scanner (OCS) data were acquired from a NASA U-2 aircraft, and water quality samples were obtained from boats. It was concluded that areas with high biological activity were clearly discernible on enhanced imagery from OCS data, and it was impossible to locate such areas on aerial photography taken with conventional or infrared sensitive color films.

Khorram, S.↗

An automated system for global atmospheric sampling using B-747 airliners

The global air sampling program utilizes commercial aircrafts in scheduled service to measure atmospheric constituents. A fully automated system designed for the 747 aircraft is described. Airline operational constraints and data and control subsystems are treated. The overall program management, system monitoring, and data retrieval from four aircraft in global service is described.

Lew, K. Q.↗