Search NASA⌕ Search

SEARCH · Search NASA

Results for “alternative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Matrix Completion Using Alternating Minimization for Distribution System State Estimation

This paper examines the problem of state estimation in power distribution systems under low-observability conditions. The recently proposed constrained matrix completion method which combines the standard matrix completion method and power flow constraints has been shown to be effective in estimating voltage phasors under low-observability conditions using single-snapshot information. However, the method requires solving a semidefinite programming (SDP) problem, which becomes computationally infeasible for large systems and if multiple-snapshot (time-series) information is used. This paper proposes an efficient algorithm to solve the constrained matrix completion problem with time-series data. This algorithm is based on reformulating the matrix completion problem as a bilinear (non-convex) optimization problem, and applying the alternating minimization algorithm to solve this problem. This paper proves the summable convergence of the proposed algorithm, and demonstrates its efficacy and scalability via IEEE 123-bus system and a real utility feeder system. This paper also explores the value of adding more data from the history in terms of computation time and estimation accuracy.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2025

Nonpyrophoric alternative to trimethylaluminum for the atomic layer deposition of Al 2 O 3

We have examined the atomic layer deposition (ALD) of Al 2 O 3 using a nonpyrophoric precursor, which possesses only Al–N bonds and no Al–C bonds: Al(N(CH 3 ) 2 ) 2 (–N(C 2 H 5 )–C 2 H 4 –N(C 2 H 5 ) 2 ), which we refer to as bis-dimethylamino-diamino-aluminum (BDMADA-Al). We employed a quartz crystal microbalance (QCM) to monitor ALD in situ and in real time, and the deposited thin films have been characterized using x-ray photoelectron spectroscopy, spectroscopic ellipsometry, x-ray reflectivity, and atomic force microscopy. Films deposited with BDMADA-Al result in near-stoichiometric Al2O3 at temperatures ranging from T = 120 to 285 °C using H 2 O as the coreactant and at T = 285 °C using t-BuOH as the coreactant. The properties of the films (density, C incorporation, stoichiometry, growth rates) are comparable using either BDMADA-Al or trimethylaluminum (TMA) as the precursor under similar reaction conditions. The N content in the films deposited with BDMADA-Al as the precursor is <1% at both T = 120 and 285 °C. Additionally, both BDMADA-Al|t-BuOH and TMA|t-BuOH processes deposit near-stoichiometric Al 2 O 3 at T = 285 °C, while neither process chemistry produces a constant growth rate per cycle at T = 120 °C. Close examination of single cycle QCM data from BDMADA-Al ALD indicates unique ligand exchange reaction mechanisms during each of the half-reactions. Experimentally, we have evidence supporting the mechanism in which upon the chemisorption of BDMADA-Al, the species on the surface retains the –N(CH 3 ) 2 ligands, while the diamine ligand is mostly lost on dissociative adsorption, except possibly at the higher temperature (285 °C). As a result, our work demonstrates that BDMADA-Al can be used as an effective alternative precursor to TMA for the ALD of Al 2 O 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Convergence Analysis of the Alternating Anderson–Picard Method for Nonlinear Fixed-Point Problems

Anderson acceleration (AA) has been widely used to solve nonlinear fixed-point problems due to its rapid convergence. This work focuses on a variant of AA in which multiple Picard iterations are performed between each AA step, referred to as the Alternating Anderson–Picard (AAP) method. Furthermore, despite introducing more “slow” Picard iterations, this method has been shown to be efficient and even more robust in both linear and nonlinear cases. However, there is a lack of theoretical analysis for AAP in the nonlinear case. In this paper, we address this gap by establishing the equivalence between AAP and a multisecant-GMRES method that uses GMRES to solve a multisecant linear system at each iteration. From this perspective, we show that AAP “converges” to the Newton-GMRES method. Specifically, as the residual approaches zero, the multisecant matrix, the approximate Jacobian inverse, the search direction, and the optimization gain of AAP converge to their counterparts in the Newton-GMRES method. These connections provide insights for analyzing the asymptotic convergence properties of AAP. Consequently, we show that AAP is locally 𝑞-linear convergent and provide an upper bound for the convergence factor of AAP. To validate the theoretical results, numerical examples are provided.

Anderson acceleration↗
DOE OSTI2024

Hepatic transcriptome analyses of juvenile white bass ( Morone chrysops ) when fed diets where fish meal is partially or totally replaced by alternative protein sources

White bass (Morone chrysops) are a popular sportfish throughout the southern United States, and one parent of the commercially-successful hybrid striped bass (M. chrysops male x M. saxatilis female). Currently, white bass are cultured using diets formulated for other carnivorous fish, such as largemouth bass (Micropterus salmoides) or hybrid striped bass and contain a significant percentage of marine fish meal. Since there are no studies regarding the utilization of alternative proteins in this species, we evaluated the global gene expression of white bass fed diets in which fish meal was partially or totally replaced by various combinations of soybean meal, poultry by-product meal, canola meal, soy protein concentrate, wheat gluten, or a commercial protein blend (Pro Cision™). Six isonitrogenous (40% protein), isolipidic (11%), and isocaloric (17.1 kJ/g) diets were formulated to meet the known nutrient and energy requirements of largemouth bass and hybrid striped bass using nutrient availability data for most of the dietary ingredients. One of the test diets consisted exclusively of plant protein sources. Juvenile white bass (40.2 g initial weight) were stocked into a flow-through aquaculture system (three tanks/diet; 10 fish/tank) and fed the test diets twice daily to satiation for 60 days. RNA sequencing and bioinformatic analyses revealed significant differentially expressed genes between all test diets when compared to fish meal control. A total of 1,260 differentially expressed genes were identified, with major ontology relating to cell cycle and metabolic processes as well as immune gene functions. This data will be useful as a resource for future refinements to moronid diet formulation, as marine fish meal becomes limiting and plant ingredients are increasingly added as a reliable protein source

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Stress-Induced Changes in Alternative Splicing Landscape in Rice: Functional Significance of Splice Isoforms in Stress Tolerance

Improvements in yield and quality of rice are crucial for global food security. However, global rice production is substantially hindered by various biotic and abiotic stresses. Making further improvements in rice yield is a major challenge to the rice research community, which can be accomplished through developing abiotic stress-resilient rice varieties and engineering durable agrochemical-independent pathogen resistance in high-yielding elite rice varieties. This, in turn, needs increased understanding of the mechanisms by which stresses affect rice growth and development. Alternative splicing (AS), a post-transcriptional gene regulatory mechanism, allows rapid changes in the transcriptome and can generate novel regulatory mechanisms to confer plasticity to plant growth and development. Mounting evidence indicates that AS has a prominent role in regulating rice growth and development under stress conditions. Several regulatory and structural genes and splicing factors of rice undergo different types of stress-induced AS events, and the functional significance of some of them in stress tolerance has been defined. Both rice and its pathogens use this complex regulatory mechanism to devise strategies against each other. This review covers the current understanding and evidence for the involvement of AS in biotic and abiotic stress-responsive genes, and its relevance to rice growth and development. Furthermore, we discuss implications of AS for the virulence of different rice pathogens and highlight the areas of further research and potential future avenues to develop climate-smart and disease-resistant rice varieties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Two Alternative Splicing Variants of AtERF73/HRE1, HRE1α and HRE1β, Have Differential Transactivation Activities in Arabidopsis

AtERF73/HRE1 is an AP2/ERF transcription factor in Arabidopsis and has two distinct alternative splicing variants, HRE1α and HRE1β. In this study, we examined the differences between the molecular functions of HRE1α and HRE1β. We found that HRE1α and HRE1β are both involved in hypoxia response and root development and have transactivation activity. Two conserved motifs in the C-terminal region of HRE1α and HRE1β, EELL and LWSY-like, contributed to their transactivation activity, specifically the four E residues in the EELL motif and the MGLWS amino acid sequence at the end of the LWSY-like motif. The N-terminal region of HRE1β also showed transactivation activity, mediated by the VDDG motif, whereas that of HRE1α did not. The transactivation activity of HRE1β was stronger than that of HRE1α in Arabidopsis protoplasts. Both transcription factors transactivated downstream genes via the GCC box. RNA-sequencing analysis further supported that both HRE1α and HRE1β might regulate gene expression associated with the hypoxia stress response, although they may transactivate different subsets of genes in downstream pathways. Our results, together with previous studies, suggested that HRE1α and HRE1β differentially transactivate downstream genes in hypoxia response and root development in Arabidopsis.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Generation, Transfer, and Loss of Alternative Oxidase Paralogues in the Aspergillaceae Family

Alternative oxidase (Aox) is a terminal oxidase operating in branched electron transport. The activity correlates positively with overflow metabolisms in certain Aspergilli, converting intracellular glucose by the shortest possible path into organic acids, like citrate or itaconate. Aox is nearly ubiquitous in fungi, but aox gene multiplicity is rare. Nevertheless, within the family of the Aspergillaceae and among its various species of industrial relevance—Aspergillus niger, A. oryzae, A. terreus, Penicillium rubens—paralogous aox genes coexist. Paralogous genes generally arise from duplication and are inherited vertically. Here, we provide evidence of four independent duplication events along the lineage that resulted in aox paralogues (aoxB) in contemporary Aspergillus and Penicillium taxa. In some species, three aox genes are co-expressed. The origin of the A. niger paralogue is different than that of the A. terreus paralogue, but all paralogous clades ultimately arise from ubiquitous aoxA parent genes. We found different patterns of uncorrelated gene losses reflected in the Aspergillus pedigree, albeit the original aoxA orthologues persist everywhere and are never replaced. The loss of acquired paralogues co-determines the contemporary aox gene content of individual species. In Aspergillus calidoustus, the two more ancient paralogues have, in effect, been replaced by two aoxB genes of distinct origins.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Simulation-Based Assessment of Energy Consumption of Alternative Powertrains in Agricultural Tractors

The objectives of this research were to develop simulation models for agricultural tractors with different powertrain technologies and evaluate the energy consumption in typical agricultural operations. Simulation models were developed for conventional, parallel hybrid electric, series hybrid electric, fuel cell hybrid, and battery electric powertrains. Autonomie vehicle simulation software (version 2022) was used for the simulations and the tractor models were simulated in two tilling cycles and in a road transport cycle with a trailer. The alternative powertrains were configured to have at least the same tractive performance as the conventional, diesel engine-powered tractor model. The simulation results showed that the potential of the parallel and series hybrid powertrains to improve energy efficiency depends heavily on the tractor size and the operating cycle conditions. The fuel cell hybrid and battery electric powertrains have a higher potential to reduce energy consumption and emissions but still have inherent technical challenges for practical operation. The battery-powered electric tractor would require improvements in the storage energy density to have a comparable operational performance in comparison to other powertrains. The fuel cell hybrid tractor already provided an adequate operating performance but the availability of hydrogen and refueling infrastructure could be challenging to resolve in the farming context.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Alternative Fuels Data Center

This presentation provides an overview of the Alternative Fuels Data Center for the 2026 Transportation Technologies Annual Merit Review, including project objectives, milestone, approach to developing and maintaining the website, project accomplishments and progress, and collaboration with other national labs and external partners.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Alternative Fuels Data Center and Related Technology Integration Tools

The U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy's Vehicle Technologies Office (VTO) facilitates national coordination of the Clean Cities coalitions through its Technology Integration Program. VTO's Technology Integration Program supports a broad technology portfolio that can reduce transportation energy costs for businesses and consumers. Fleets, cities, and regions can use the tools featured in this guide to implement alternative fuels and advanced vehicles. Also learn how Clean Cities coalitions and their stakeholders across the country have used the tools.

AFDC↗
DOE OSTI2020

Matrix Completion Using Alternating Minimization for Distribution System State Estimation: Preprint

This paper examines the problem of state estimation in power distribution systems under low-observability conditions. The recently proposed constrained matrix completion method which combines the standard matrix completion method and power flow constraints has been shown to be effective in estimating voltage phasors under low-observability conditions using single-snapshot information. However, the method requires solving a semidefinite programming (SDP) problem, which becomes computationally infeasible for large systems and if multiple-snapshot (time-series) information is used. This paper proposes an efficient algorithm to solve the constrained matrix completion problem with time-series data. This algorithm is based on reformulating the matrix completion problem as a bilinear (non-convex) optimization problem, and applying the alternating minimization algorithm to solve this problem. This paper proves the summable convergence of the proposed algorithm, and demonstrates its efficacy and scalability via IEEE 123-bus system and a real utility feeder system. This paper also explores the value of adding more data from the history in terms of computation time and estimation accuracy.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2023

On the Importance of Chemical Precision in Organic Electronics: Fullerene Intercalation in Perfectly Alternating Conjugated Polymers

Abstract The true structure of alternating conjugated polymers—the state‐of‐the‐art materials for many organic electronics—often deviates from the idealized picture. Homocoupling defects are in fact inherent to the widely used cross‐coupling polymerization methods. Nevertheless, many polymers still perform excellently in the envisaged applications, which raises the question if one should really care about these imperfections. This article looks at the relevance of chemical precision (and lack thereof) in conjugated polymers covering the entire spectrum from the molecular scale, to the micro and mesostructure, up to the device level. The different types of polymerization errors for the alkoxylated variant of the benchmark (semi)crystalline polymer poly[2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐ b ]thiophene (PBTTT) are identified, visualized, and quantified and a general strategy to avoid homocoupling is introduced. Through a combination of experiments and supported by simulations, it is shown that these coupling defects hinder fullerene intercalation and limit device performance as compared to the homocoupling‐free analog. This clearly demonstrates that structural defects do matter and should be generally avoided, in particular when the geometrical regularity of the polymer is essential. These insights likely go beyond the specific PBTTT derivatives studied here and are of general relevance for the wider organic electronics field.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Direct Observation of Alternating Octahedral and Prismatic Sodium Layers in O3-Type Transition Metal Oxides

The oxygen stacking of O3-type layered sodium transition metal oxides (O3-NaTMO 2 ) changes dynamically upon topotactic Na extraction and reinsertion. While the phase transition from octahedral to prismatic Na coordination that occurs at intermediate desodiation by transition metal slab gliding is well understood, the structural evolution at high desodiation, crucial to achieve high reversible capacity, remains mostly uncharted. In this work, the phase transitions of O3-type layered NaTMO 2 at high voltage are investigated by combining experimental and computational approaches. An OP2-type phase that consists of alternating octahedral and prismatic Na layers is directly observed by in situ X-ray diffraction and high-resolution scanning transmission electron microscopy. The origin of this peculiar phase is explained by atomic interactions involving Jahn–Teller active Fe 4+ and distortion tolerant Ti 4+ that stabilize the local Na environment. Finally, the path-dependent desodiation and resodiation pathways are also rationalized in this material through the different kinetics of the prismatic and octahedral layers, presenting a comprehensive picture about the structural stability of the layered materials upon Na intercalation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Alternative Energy Carriers: Unique Interfaces for Electrochemical Hydrogenic Transformations

Abstract The shift toward renewable energy generation sources, characterized by their non‐carbon emitting but variable nature, has spurred significant innovation in energy storage technologies. Advancements in foundational understanding from investments in basic science and clever engineering solutions, coupled with increasing industrial adoption, have resulted in a notable reduction in the cost of storing electricity from variable energy generation sources. These developments have paved the way for the exploration of new and innovative forms of energy storage that deviate from traditional technologies. In this perspective, it is posited that the progress made in energy storage research over recent years has opened the door to the development of energy carriers for technologies that are yet to be realized. To illustrate this concept, examples of alternative energy carriers are provided within the context of unique electrochemical interfaces for electrochemical hydrogenic transformations. The unique properties of these interfaces and electrochemical systems can be leveraged in ways not yet imagined, creating new possibilities for energy storage. A perspective on the progress and challenges for each interface as well as a general outlook for the advancement of energy carrier systems are provided.

25 ENERGY STORAGE↗
DOE OSTI2025

Supply Chain Energy and Greenhouse Gas Analysis Using the Materials Flows Through Industry (MFI) Tool: Examination of Alternative Technology Scenarios for the U.S. Chemical Sector

Chemical manufacturing is a large and diverse sector of the U.S. economy, with products, fuels, and a wide assortment of materials used daily by both the public and businesses. Currently, several of the largest volume chemicals produced in the United States rely on fossil fuels as a feedstock, energy source, or both. The list of chemicals includes steam cracking products such as ethylene, propylene, benzene, and xylenes as well as products such as ammonia and methanol. The focus for this work is on platform chemicals that are both produced in the largest volume and have a high potential for subsequent processing into more specialized products. In this study, we explore several new pathways that reduce the overall energy consumption and greenhouse gas (GHG) emissions for each product. These pathways include energy efficiency measures applied to existing production methods, the use of bio‐based fuels and/or feedstocks as new production methods, and electrification of high‐energy‐input stages within current production methods. Scenarios for energy demand and GHG reduction were conducted with the National Renewable Energy Laboratory's Materials Flows through Industry tool. Projections of the energy demand and GHG emissions in 2030 and 2050 are included, using grid composition projections from the NREL ReEDS model. The alternative scenarios selected showcase the effect of realistic changes the industry could make, focusing on technologies with a high level of technical readiness.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Beyond Solvothermal: Alternative Synthetic Methods for Covalent Organic Frameworks

Abstract Covalent organic frameworks (COFs) are crystalline porous organic materials that hold a wealth of potential applications across various fields. The development of COFs, however, is significantly impeded by the dearth of efficient synthetic methods. The traditional solvothermal approach, while prevalent, is fraught with challenges such as complicated processes, excessive energy consumption, long reaction times, and limited scalability, rendering it unsuitable for practical applications. The quest for simpler, quicker, more energy‐efficient, and environmentally benign synthetic strategies is thus paramount for bridging the gap between academic COF chemistry and industrial application. This Review provides an overview of the recent advances in alternative COF synthetic methods, with a particular emphasis on energy input. We discuss representative examples of COF synthesis facilitated by microwave, ultrasound, mechanic force, light, plasma, electric field, and electron beam. Perspectives on the advantages and limitations of these methods against the traditional solvothermal approach are highlighted.

Hu, Jiyun↗
DOE OSTI2023

Beyond Solvothermal: Alternative Synthetic Methods for Covalent Organic Frameworks

Abstract Covalent organic frameworks (COFs) are crystalline porous organic materials that hold a wealth of potential applications across various fields. The development of COFs, however, is significantly impeded by the dearth of efficient synthetic methods. The traditional solvothermal approach, while prevalent, is fraught with challenges such as complicated processes, excessive energy consumption, long reaction times, and limited scalability, rendering it unsuitable for practical applications. The quest for simpler, quicker, more energy‐efficient, and environmentally benign synthetic strategies is thus paramount for bridging the gap between academic COF chemistry and industrial application. This Review provides an overview of the recent advances in alternative COF synthetic methods, with a particular emphasis on energy input. We discuss representative examples of COF synthesis facilitated by microwave, ultrasound, mechanic force, light, plasma, electric field, and electron beam. Perspectives on the advantages and limitations of these methods against the traditional solvothermal approach are highlighted.

Hu, Jiyun↗