SEARCH · Search NASA

Results for “application example”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Programming Probabilistic Structural Analysis for Parallel Processing Computer

The ultimate goal of this research program is to make Probabilistic Structural Analysis (PSA) computationally efficient and hence practical for the design environment by achieving large scale parallelism. The paper identifies the multiple levels of parallelism in PSA, identifies methodologies for exploiting this parallelism, describes the development of a parallel stochastic finite element code, and presents results of two example applications. It is demonstrated that speeds within five percent of those theoretically possible can be achieved. A special-purpose numerical technique, the stochastic preconditioned conjugate gradient method, is also presented and demonstrated to be extremely efficient for certain classes of PSA problems.

Sues, Robert H.↗

NASA NTRS1991

Sensor placement for on-orbit modal testing

A systematic procedure of placing accelerometers for the on-orbit modal identification of large flexible space structures is addressed. Target modes for modal testing are selected by examining the modal cost of each mode. Assuming that a time-domain modal identification algorithm such as Eigensystem Realization Algorithm is employed to identify the modes from measured time response data, the sensors are placed to ensure the recovery of the target modes. As an application example of the procedure, an accelerometer placement study for the Space Station Freedom On-Orbit Modal Identification Experiment is presented.

Lim, Tae W.↗

NASA NTRS1990

Object-oriented fault tree models applied to system diagnosis

When a diagnosis system is used in a dynamic environment, such as the distributed computer system planned for use on Space Station Freedom, it must execute quickly and its knowledge base must be easily updated. Representing system knowledge as object-oriented augmented fault trees provides both features. The diagnosis system described here is based on the failure cause identification process of the diagnostic system described by Narayanan and Viswanadham. Their system has been enhanced in this implementation by replacing the knowledge base of if-then rules with an object-oriented fault tree representation. This allows the system to perform its task much faster and facilitates dynamic updating of the knowledge base in a changing diagnosis environment. Accessing the information contained in the objects is more efficient than performing a lookup operation on an indexed rule base. Additionally, the object-oriented fault trees can be easily updated to represent current system status. This paper describes the fault tree representation, the diagnosis algorithm extensions, and an example application of this system. Comparisons are made between the object-oriented fault tree knowledge structure solution and one implementation of a rule-based solution. Plans for future work on this system are also discussed.

Iverson, David L.↗

NASA NTRS1991

A wide-band monolithic quasi-optical power meter for millimeter- and submillimeter-wave applications

A novel monolithic power meter has been developed for submillimeter-wave applications (100 GHz to 10 THz). The detector is a large-area bismuth bolometer integrated on a 1.2-micron-thick dielectric membrane. This approach results in a wide-band, high-responsivity detector. The power meter is simple to fabricate, is inexpensive, and can be easily calibrated using a low-frequency network. Quasi-optical measurements at 90, 140, and 240 GHz show that the bolometer is polarization-independent and could be modeled by a simple transmission line model. Absolute power measurements at 90, 140, and 240 GHz show a + or - 5 percent accuracy and agree well with a calibrated Anritsu power meter at 90 GHz. Potential application areas are power calibration, antenna coupling efficiency measurements, and absolute power measurements from solid-state devices and far-infrared lasers at submillimeter wavelengths. Absolute output power measurements on a 220-280 GHz tripler using the quasi-optical power meter are presented as an application example.

Ling, Curtis C.↗

NASA NTRS1991

Automated Predictive Diagnosis (APD): A 3-tiered shell for building expert systems for automated predictions and decision making

The APD software features include: On-line help, Three level architecture, (Logic environments, Setup/Application environment, Data environment), Explanation capability, and File handling. The kinds of experimentation and record keeping that leads to effective expert systems is facilitated by: (1) a library of inferencing modules (in the logic environment); (2) an explanation capability which reveals logic strategies to users; (3) automated file naming conventions; (4) an information retrieval system; and (5) on-line help. These aid with effective use of knowledge, debugging and experimentation. Since the APD software anticipates the logical rules becoming complicated, it is embedded in a production system language (CLIPS) to insure the full power of the production system paradigm of CLIPS and availability of the procedural language C. The development is discussed of the APD software and three example applications: toy, experimental, and operational prototype for submarine maintenance predictions.

Steib, Michael↗

NASA NTRS1992

IGGy: An interactive environment for surface grid generation

A graphically interactive derivative of the EAGLE boundary code is presented. This code allows the user to interactively build and execute commands and immediately see the results. Strong ties with a batch oriented script language are maintained. A generalized treatment of grid definition parameters allows a more generic definition of the grid generation process and allows the generation of command scripts which can be applied to topologically similar configurations. The use of the graphical user interface is outlined and example applications are presented.

Prewitt, Nathan C.↗

NASA NTRS1991

A constant current charge technique for low Earth orbit life testing

A constant current charge technique for low earth orbit testing of nickel cadmium cells is presented. The method mimics the familiar taper charge of the constant potential technique while maintaining cell independence for statistical analysis. A detailed example application is provided and the advantages and disadvantages of this technique are discussed.

Glueck, Peter↗

NASA NTRS1992

A principled approach to the measurement of situation awareness in commercial aviation

The issue of how to support situation awareness among crews of modern commercial aircraft is becoming especially important with the introduction of automation in the form of sophisticated flight management computers and expert systems designed to assist the crew. In this paper, cognitive theories are discussed that have relevance for the definition and measurement of situation awareness. These theories suggest that comprehension of the flow of events is an active process that is limited by the modularity of attention and memory constraints, but can be enhanced by expert knowledge and strategies. Three implications of this perspective for assessing and improving situation awareness are considered: (1) Scenario variations are proposed that tax awareness by placing demands on attention; (2) Experimental tasks and probes are described for assessing the cognitive processes that underlie situation awareness; and (3) The use of computer-based human performance models to augment the measures of situation awareness derived from performance data is explored. Finally, two potential example applications of the proposed assessment techniques are described, one concerning spatial awareness using wide field of view displays and the other emphasizing fault management in aircraft systems.

Tenney, Yvette J.↗

NASA NTRS1992

Error analysis of finite element results on plates with nonuniform grids

Discrete Dirac delta functions in two dimensions and the governing plate differential equations are used to produce continuous approximations from discrete finite-element data on nonuniform grids. The resulting continuous approximation when compared to the discrete data provides an error analysis. Moreover, the continuous approximation can be differentiated to compute continuous stresses needed for component failure prediction. Stresses can then be calculated accurately at boundaries and at interfaces where finite-element analysis alone may not provide reliable results. The continuous solution along with the differential equations also provides a residual error which is used in the error analysis. This is a unique feature of this approach. Two application examples of the procedure are provided. One example involves the linear response of a clamped square plate under uniform transverse load. Results from finite-element analysis and the continuous solution from the present analysis are compared to a closed-form elasticity solution. The continuous solution is used in a Zienkiewicz-Zhu error estimator to assess the performance of the present analysis. The continuous solution is observed to dramatically correct the finite-element results. In a second example, results for the nonlinear response of a stiffened panel are compared to the finite-element solution.

Sistla, Rajaram↗

NASA NTRS1993

Practical input optimization for aircraft parameter estimation experiments

The object of this research was to develop an algorithm for the design of practical, optimal flight test inputs for aircraft parameter estimation experiments. A general, single pass technique was developed which allows global optimization of the flight test input design for parameter estimation using the principles of dynamic programming with the input forms limited to square waves only. Provision was made for practical constraints on the input, including amplitude constraints, control system dynamics, and selected input frequency range exclusions. In addition, the input design was accomplished while imposing output amplitude constraints required by model validity and considerations of safety during the flight test. The algorithm has multiple input design capability, with optional inclusion of a constraint that only one control move at a time, so that a human pilot can implement the inputs. It is shown that the technique can be used to design experiments for estimation of open loop model parameters from closed loop flight test data. The report includes a new formulation of the optimal input design problem, a description of a new approach to the solution, and a summary of the characteristics of the algorithm, followed by three example applications of the new technique which demonstrate the quality and expanded capabilities of the input designs produced by the new technique. In all cases, the new input design approach showed significant improvement over previous input design methods in terms of achievable parameter accuracies.

Morelli, Eugene A.↗

NASA NTRS1993

Microtextured metals for stray-light suppression in the Clementine startracker

Anodized blacks for suppressing stray light in optical systems can now be replaced by microscopically textured metal surfaces. An application of these black surfaces to the Clementine star-tracker navigational system, which will be launched in early 1994 to examine the Moon, en route to intercept an asteroid, is detailed. Rugged black surfaces with Lambertian BRDF less than 10(exp -2) srad(sup -1) are critical for suppressing stray light in the star-tracker optical train. Previously available materials spall under launch vibrations to contaminate mirrors and lenses. Microtextured aluminum is nearly as dark, but much less fragile. It is made by differential ion beam sputtering, which generates light-trapping pores and cones slightly smaller than the wavelength to be absorbed. This leaves a sturdy but light-absorbing surface that can survive challenging conditions without generating debris or contaminants. Both seeded ion beams and plasma immersion (from ECR plasmas) extraction can produce these microscopic textures without fragile interfaces. Process parameters control feature size, spacing, and optical effects (THR, BRDF). Both broad and narrow absorption bands can be engineered with tuning for specific wavelengths and applications. Examples are presented characterized by FTIR in reflection librators (0.95 normal emissivity), heat rejection, and enhanced nucleate boiling.

Johnson, E. A.↗

NASA NTRS1993

Near net shape processing: A necessity for advanced materials applications

High quality discrete parts are the backbones for successful operation of equipment used in transportation, communication, construction, manufacturing, and appliances. Traditional shapemaking for discrete parts is carried out predominantly by machining, or removing unwanted material to produce the desired shape. As the cost and complexity of modern materials escalates, coupled with the expense and environmental hazards associated with handling of scrap, it is increasingly important to develop near net shape processes for these materials. Such processes involve casting of liquid materials, consolidation of powder materials, or deformation processing of simple solid shapes into the desired shape. Frequently, several of these operations may be used in sequence to produce a finished part. The processes for near net shape forming may be applied to any type of material, including metals, polymers, ceramics, and their composites. The ability to produce shapes is the key to implementation of laboratory developments in materials science into real world applications. This seminar presents an overview of near net shapemaking processes, some application examples, current developments, and future research opportunities.

Kuhn, Howard A.↗

NASA NTRS1993

A sublaminate analysis method for predicting disbond and delamination loads in composite structures

A method is proposed for assessing the forces that can delaminate composite laminates and bonded structures. The approach employs a higher-order plate theory to represent portions of the laminate. The ply properties are integrated through the thickness in a manner that is consistent with the displacement assumptions in the plate theory, thus providing for accurate representation of the stacking sequence effects. In addition to stress analysis, the method also provides the strain energy release rate for the growth of existing delaminations. The analysis has been incorporated into a computer code, TTSS (through thickness stretching and shear). Application examples, including a double cantilever beam and a curved laminate, are examined.

Flanagan, G.↗

NASA NTRS1993

Deformed ellipsoidal gratings for far-ultraviolet spectrographs - Analytic optimization

Analytic formulas are developed for the semiaxes and for the deformation coefficients of a deformed ellipsoidal grating that minimize aberrations over a given spectral range. These include the Rowland circle mount and quasi-Rowland circle mounts, as required for systems that combine spectra from multiple gratings on a common detector. It is also shown that the necessary condition for a holographic grating to give a better performance over a conventional grating is the use of a convergent beam and a divergent beam for the recording. Examples applicable to the Far-Ultraviolet Spectroscopic Explorer are given. The light-path function for a deformed ellipsoidal holographic grating is also presented.

Content, David↗

NASA NTRS1932

Methods of Visually Determining the Air Flow Around Airplanes

This report describes methods used by the National Advisory Committee for Aeronautics to study visually the air flow around airplanes. The use of streamers, oil and exhaust gas streaks, lampblack and kerosene, powdered materials, and kerosene smoke is briefly described. The generation and distribution of smoke from candles and from titanium tetrachloride are described in greater detail because they appear most advantageous for general application. Examples are included showing results of the various methods.

Gough, Melvin N↗

NASA NTRS1991

Parallel optimization algorithms and their implementation in VLSI design

Two new parallel optimization algorithms based on the simplex method are described. They may be executed by a SIMD parallel processor architecture and be implemented in VLSI design. Several VLSI design implementations are introduced. An application example is reported to demonstrate that the algorithms are effective.

Lee, G.↗

NASA NTRS1994

Laminated thermoplastic composite material from recycled high density polyethylene

The design of a materials-science, educational experiment is presented. The student should understand the fundamentals of polymer processing and mechanical property testing of materials. The ability to use American Society for Testing and Materials (ASTM) standards is also necessary for designing material test specimens and testing procedures. The objectives of the experiment are (1) to understand the concept of laminated composite materials, processing, testing, and quality assurance of thermoplastic composites and (2) to observe an application example of recycled plastics.

Liu, Ping↗

NASA NTRS1993

Experience with Formal Methods techniques at the Jet Propulsion Laboratory from a quality assurance perspective

Recent experience with Formal Methods (FM) in the Software Quality Assurance Section at the Jet Propulsion Lab is presented. An integrated Formal Method process is presented to show how related existing requirements analysis and FM techniques complement one another. Example application of FM techniques such as formal specifications and specification animators are presented. The authors suggest that the quality assurance organization is a natural home for the Formal Methods specialist, whose expertise can then be used to best advantage across a range of projects.

Kelly, John C.↗