Search NASA⌕ Search

SEARCH · Search NASA

Results for “approximate Newton”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

IGR J16318-4848: 7 Years of INTEGRAL Observations

Since the discovery of IGR 116318-4848 in 2003 January, INTEGRAL has accumulated more than 5.8 Ms in IBIS/ISGRI. We present the first extensive analysis of the archival INTEGRAL data (IBIS/ISGRI, and JEM-X when available) for this source, together with the observations carried out by XMM-Newton (twice in 2003, and twice in 2004) and Suzaku (2006). The source is very variable in the long-term, with periods of low activity, where the source is almost not detected, and flares with a luminosity approximately 10 times greater than its average value (5.4 cts/s). IGR 116318-4848 is a HMXB containing a sgB[e] star and a compact object (most probably a neutron star) deeply embedded in the stellar wind of the mass donor. The variability of the source (also in the short-term) can be ascribed to the wind of the optical star being very clumpy. We study the variation of the spectral parameters in time scales of INTEGRAL revolutions. The photoelectric absorption is, with NH around 10(exp 24)/ square cm, unusually high. During brighter phases the strong K-alpha iron line known from XMM-Newton and Suzaku observations is also detectable with the JEM-X instrument.

Barragan, Laura↗
DOE OSTI2022

Do blue galaxy-clusters have hot intracluster gas?

Abstract We present herein a systematic X-ray analysis of blue galaxy clusters at z = 0.84 discovered by the Subaru telescope. The sample consisted of 43 clusters identified by combining red-sequence and blue-cloud surveys, covering a wide range of emitter fractions (i.e., 0.3–0.8). The spatial extent of the over-density region of emitter galaxies was approximately 1 Mpc in radius. The average cluster mass was estimated as 0.6(<1.5) × 1014 M⊙ from the stacked weak-lensing measurement. We analyzed the XMM-Newton archival data, and measured the X-ray luminosity of the hot intracluster medium. As a result, diffuse X-ray emission was marginally detected in 14 clusters, yielding an average luminosity of 5 × 1042 erg s−1. To the contrary, it was not significant in 29 clusters. The blue clusters were significantly fainter than the red-dominated clusters, and the X-ray luminosity did not show any meaningful correlation either with emitter fraction or richness. The X-ray surface brightness was low, but the amount of gas mass was estimated to be comparable to that observed in the 1013–1014 M⊙ cluster. Based on the results, we suggest that the blue clusters are at the early formation stage, and the gas is yet to be compressed and heated up to produce appreciable X-rays. Follow-up spectroscopic measurements are essential to clarify the dynamical status and co-evolution of galaxies and hot gas in the blue clusters.

Misato, Rana↗
NASA NTRS2006

INTEGRAL and XMM-Newton Observations of the X-Ray Pulsar IGR J16320-4751/AX J1691.9-4752

We report on observations of the X-ray pulsar IGR J16320-4751 (also known as AX J1631.9-4752) performed simultaneously with International Gamma-Ray Astrophysics Laboratory (INTEGRAL) and XMM-Newton. We refine the source position and identify the most likely infrared counterpart. Our simultaneous coverage allows us to confirm the presence of X-ray pulsations at approximately 1300 s, that we detect above 20 keV with INTEGRAL for the first time. The pulse fraction is consistent with being constant with energy, which is compatible with a model of polar accretion by a pulsar. We study the spectral properties of IGR J16320-4751 during two major periods occurring during the simultaneous coverage with both satellites, namely a flare and a non-flare period. We detect the presence of a narrow 6.4 keV iron line in both periods. The presence of such a feature is typical of supergiant wind accretors such as Vela X-1 or GX 301-2. We inspect the spectral variations with respect to the pulse phase during the non-flare period, and show that the pulse is solely due to variations of the X-ray flux emitted by the source and not due to variations of the spectral parameters. Our results are therefore compatible with the source being a pulsar in a High Mass X-ray Binary. We detect a soft excess appearing in the spectra as a blackbody with a temperature of approximately 0.07 keV. We discuss the origin of the X-ray emission in IGR J16320-4751: while the hard X-rays are likely the result of Compton emission produced in the close vicinity of the pulsar, based on energy argument we suggest that the soft excess is likely the emission by a collisionally energized cloud in which the compact object is embedded.

Rodriquez, J.↗
NASA NTRS2017

The Stochastic X-Ray Variability of the Accreting Millisecond Pulsar MAXI J0911-655

In this work, I report on the stochastic X-ray variability of the 340 hertz accreting millisecond pulsar MAXI J0911-655. Analyzing pointed observations of the XMM-Newton and NuSTAR observatories, I find that the source shows broad band-limited stochastic variability in the 0.01-10 hertz range with a total fractional variability of approximately 24 percent root mean square timing residuals in the 0.4 to 3 kiloelectronvolt energy band that increases to approximately 40 percent root mean square timing residuals in the 3 to 10 kiloelectronvolt band. Additionally, a pair of harmonically related quasi-periodic oscillations (QPOs) are discovered. The fundamental frequency of this harmonic pair is observed between frequencies of 62 and 146 megahertz. Like the band-limited noise, the amplitudes of the QPOs show a steep increase as a function of energy; this suggests that they share a similar origin, likely the inner accretion flow. Based on their energy dependence and frequency relation with respect to the noise terms, the QPOs are identified as low-frequency oscillations and discussed in terms of the Lense-Thirring precession model.

ulsars: general { stars: neutron { X-rays: binarie↗
NASA NTRS1997

Design of a Minimum Surface-Effect Tendon-Based Microactuator for Micromanipulation

A piezoelectric (PZT) stack-based actuator was developed to provide a means of actuation with dynamic characteristics appropriate for small-scale manipulation. In particular, the design incorporates a highly nonlinear, large-ratio transmission that provides approximately two orders of magnitude motion amplification from the PZT stack. In addition to motion amplification, the nonlinear transmission was designed via optimization methods to distort the highly non-uniform properties of a piezoelectric actuator so that the achievable actuation force is nearly constant throughout the actuator workspace. The package also includes sensors that independently measure actuator output force and displacement, so that a manipulator structure need not incorporate sensors nor the associated wires. Specifically, the actuator was designed to output a maximum force of at least one Newton through a stroke of at least one millimeter. For purposes of small-scale precision position and/or force control, the actuator/sensor package was designed to eliminate stick-slip friction and backlash. The overall dimensions of the actuator/sensor package are approximately 40 x 65 x 25 mm.

Goldfarb, Michael↗
NASA NTRS1992

Equations of motion of slung-load systems, including multilift systems

General simulation equations are derived for the rigid body motion of slung-load systems. This work is motivated by an interest in trajectory control for slung loads carried by two or more helicopters. An approximation of these systems consists of several rigid bodies connected by straight-line cables or links. The suspension can be assumed elastic or inelastic. Equations for the general system are obtained from the Newton-Euler rigid-body equations with the introduction of generalized velocity coordinates. Three forms are obtained: two generalize previous case-specific results for single-helicopter systems with elastic and inelastic suspensions, respectively; and the third is a new formulation for inelastic suspensions. The latter is derived from the elastic suspension equations by choosing the generalized coordinates so that motion induced by cable stretching is separated from motion with invariant cable lengths, and by then nulling the stretching coordinates to get a relation for the suspension forces. The result is computationally more efficient than the conventional formulation, is readily integrated with the elastic suspension formulation, and is easily applied to the complex dual-lift and multilift systems. Results are given for two-helicopter systems; three configurations are included and these can be integrated in a single simulation. Equations are also given for some single-helicopter systems, for comparison with the previous literature, and for a multilift system. Equations for degenerate-body approximations (point masses, rigid rods) are also formulated and results are given for dual-lift and multilift systems. Finally, linearlized equations of motion are given for general slung-load systems are presented along with results for the two-helicopter system with a spreader bar.

Cicolani, Luigi S.↗
NASA NTRS2006

XMM-Newton Archival Study of the ULX Population in Nearby Galaxies

We present the results of an archival XMM-Newton study of the bright X-ray point sources (L(sub X) greater than 10(exp 38 erg per second)) in 32 nearby galaxies. From our list of approximately 100 point sources, we attempt to determine if there is a low-state counterpart to the Ultraluminous X-ray (ULX) population, searching for a soft-hard state dichotomy similar to that known for Galactic X-ray binaries and testing the specific predictions of the IMBH hypothesis. To this end, we searched for low-state objects, which we defined as objects within our sample which had a spectrum well fit by a simple absorbed power law, and high-state objects, which we defined as objects better fit by a combined blackbody and a power law. Assuming that low-state)) objects accrete at approximately 10% of the Eddington luminosity (Done & Gierlinski 2003) and that high-state objects accrete near the Eddington luminosity we further divided our sample of sources into low and high state ULX sources. We classify 16 sources as low-state ULXs and 26 objects as high-state ULXs. As in Galactic black hole systems, the spectral indices, GAMMA, of the lowstate objects, as well as the luminosities, tend to be lower than those of the high-state objects. The observed range of blackbody temperatures for the high state is 0.1-1 keV, with the most luminous systems tending toward the lowest temperatures. We therefore divide our high-state ULXs into candidate IMBHs (with blackbody temperatures of approximately 0.1 keV) and candidate stellar mass BHs (with blackbody temperatures of approximately 1.0 keV). A subset of the candidate stellar mass BHs have spectra that are well-fit by a Comptonization model, a property similar of Galactic BHs radiating in the very-high state near the Eddington limit.

Winter, Lisa M.↗
NASA NTRS1986

An efficient algorithm for solution of the unsteady transonic small-disturbance equation

A time accurate approximate factorization (AF) algorithm is formulated for solution of the three dimensional unsteady transonic small-disturbance equation. The AF algorithm consists of a time linearization procedure coupled with a Newton iteration technique. Superior stability characteristics of the new algorithm are demonstrated through applications to steady and oscillatory flows at subsonic and supersonic freestream conditions for an F-5 fighter wing. For steady flow calculations, the size of the time step is cycled to achieve rapid convergence. For unsteady flow calculations, the AF algorithm is sufficiently robust to allow the step size to be selected based on accuracy rather than on stability considerations. Therefore, accurate solutions are obtained in only several hundred time steps yielding a significant computational cost savings when compared to alternative methods.

Batina, John T.↗
NASA NTRS1968

Flight Test of a 40-Foot Nominal-Diameter Disk-Gap-Band Parachute Deployed at a Mach Number of 1.91 and a Dynamic Pressure of 11.6 Pounds per Square Foot

A 40-foot (12.2 meter) nominal-diameter disk-gap-band parachute was flight tested as part of the NASA Supersonic Planetary Entry Decelerator Program (SPED-I). The test parachute was ejected by a deployment mortar from an instrumented payload at an altitude of 140,000 feet (42.5 kilometers). The payload was at a Mach number of 1.91 and the dynamic pressure was 11.6 pounds per square foot (555 newtons per square meter) at the time the parachute deployment mortar was fired. The parachute reached suspension line stretch in 0.43 second with a resultant snatch force loading of 1990 pounds (8850 newtons). The maximum parachute opening load of 6500 pounds (28,910 newtons) came 0.61 second later at a total elapsed time from mortar firing of 1.04 seconds. The first full inflation occurred at 1.12 seconds and stable inflation was achieved at approximately 1.60 seconds. The parachute had an average axial-force coefficient of 0.53 during the deceleration period. During the steady-state descent portion of the flight test, the average effective drag coefficient was also 0.53 and pitch-yaw oscillations of the canopy averaged less than 10 degrees in the altitude region above 100,000 feet (30.5 meters).

EXPERIMENTS↗
NASA NTRS2007

The Remarkable X-ray Spectrum of the Broad-Line Radio Galaxy 3C 445

The nearby (z=0.057) radio-loud source 3C 445, optically classified as a Broad-Line Radio Galaxy, exhibits an X-ray spectrum strongly reminiscent of an obscured AGN, suggesting we are seeing this source at a relatively large angle from the radio jet. Here we present an archival 15 ks XMM-Newton observation of 3C 445 which confirms the remarkable complexity of its X-ray emission. The X-ray emission is described by a power law continuum with GAMMA approximately equal to 1.4, absorbed by several layers of cold gas, plus strong cold reflection. A narrow, unresolved Fe Kalpha emission line is detected, confirming previous findings, with EW approximately equal to 400 eV. A soft excess is present below 2 keV over the extrapolation of the hard X-ray power law, which we model with a power law with the same photon index and absorbed by a column density N(sub H)5 approximately equal to 10(sup 20) cm(sup -2) in excess to Galactic. Remarkably, a host of emission lines are present below 2 keV, confirming previous indications from ASCA, due to H- and He-like O, Mg, and Si. The detection of two features at 0.74 and 0.87 keV, identified with OVII and OVIII Radiative Recombination Continuum features, suggest an origin of the lines from a photoionized gas, with properties very similar to radio-quiet obscured AGN. Two different ionized media, or a single stratified medium, are required to fit the soft X-ray data satisfactorily. The similarity of the X-ray spectrum of 3C 445 to Seyferts underscores that the central engines of radio-loud and radio-quiet AGN similarly host both cold and warm gas.

Sambruna, R. M.↗
DOE OSTI2020

Solving Eco-Driving Problems Using Indirect Collocation Method and Smooth Representation

Here, we discuss the eco-driving problem, considering both electric and conventional powertrains, and presents a pathway to solving it numerically using an indirect collocation method. Despite the low-order system dynamics, the piecewise fuel/efficiency map, gear shifting, and real-world traffic/road situations bring system discontinuities/switchings and pure state constraints into the problem formulation, which make the problem highly nonlinear and nontrivial to solve. This letter introduces smooth approximations to convert the original problem to an unconstrained (and penalized) smooth boundary-value problem. This approach eliminates the discussion of the switching structure and leads to a lightweight Newton-method-based solution procedure.

42 ENGINEERING↗
NASA NTRS1987

An efficient algorithm for solution of the unsteady transonic small-disturbance equation

A time accurate approximation factorization (AF) algorithm is formulated for solution of the three-dimensional unsteady transonic small-disturbance equation. The AF algorithm consists of a time linearization procedure coupled with a Newton iteration technique. Superior stability characteristics of the new algorithm are demonstrated through applications to steady and oscillatory flows at subsonic and supersonic freestream conditions for an F-5 fighter wing. For steady flow calculations, the size of the time step is cycled to achieve rapid convergence. For unsteady flow calculations, the AF algorithm is sufficiently robust to allow the step size to be selected based on accuracy rather than on stability considerations. Therefore, accurate solutions are obtained in only several hundred time steps yielding a significant computational cost savings when compared to alternative methods.

Batina, John T.↗
NASA NTRS2001

Multigrid approaches to non-linear diffusion problems on unstructured meshes

The efficiency of three multigrid methods for solving highly non-linear diffusion problems on two-dimensional unstructured meshes is examined. The three multigrid methods differ mainly in the manner in which the nonlinearities of the governing equations are handled. These comprise a non-linear full approximation storage (FAS) multigrid method which is used to solve the non-linear equations directly, a linear multigrid method which is used to solve the linear system arising from a Newton linearization of the non-linear system, and a hybrid scheme which is based on a non-linear FAS multigrid scheme, but employs a linear solver on each level as a smoother. Results indicate that all methods are equally effective at converging the non-linear residual in a given number of grid sweeps, but that the linear solver is more efficient in cpu time due to the lower cost of linear versus non-linear grid sweeps.

Mavriplis, Dimitri J.↗
NASA NTRS2018

Temperature Structure in the Perseus Cluster Core Observed with Hitomi

The present paper investigates the temperature structure of the X-ray emitting plasma in the core of the Perseus cluster using the 1.8-20.0 keV data obtained with the Soft X-ray Spectrometer (SXS) onboard the Hitomi Observatory. A series of four observations were carried out, with a total effective exposure time of 338 ks and covering a central region _ 7′ in diameter. The SXS was operated with an energy resolution of _5 eV (full width at half maximum) at 5.9 keV. Not only fine structures of K-shell lines in He-like ions but also transitions from higher principal quantum numbers are clearly resolved from Si through Fe. This enables us to perform temperature diagnostics using the line ratios of Si, S, Ar, Ca, and Fe, and to provide the first direct measurement of the excitation temperature and ionization temperature in the Perseus cluster. The observed spectrum is roughly reproduced by a single temperature thermal plasma model in collisional ionization equilibrium, but detailed line ratio diagnostics reveal slight deviations from this approximation. In particular, the data exhibit an apparent trend of increasing ionization temperature with increasing atomic mass, as well as small differences between the ionization and excitation temperatures for Fe, the only element for which both temperatures can be measured. The best-fit two-temperature models suggest a combination of 3 and 5 keV gas, which is consistent with the idea that the observed small deviations from a single temperature approximation are due to the effects of projection of the known radial temperature gradient in the cluster core along the line of sight. Comparison with the Chandra/ACIS and the XMM-Newton/RGS results on the other hand suggests that additional lower-temperature components

Aharonian, Felix↗
DOE OSTI2023

Enabling attractive-repulsive potentials in binary-collision-approximation monte-carlo codes for ion-surface interactions

Abstract Binary Collision Approximation (BCA) codes for ion-material interactions, such as SRIM, Tridyn, F-TRIDYN, and SDtrimSP, have historically been limited to screened Coulomb potentials even at low energies due to the difficulty in numerically solving the Distance of Closest Approach (DOCA) problem for attractive-repulsive potentials. Techniques such as direct n-body simulation or modifications to Newton’s method are either prohibitively costly or not guaranteed to work for all potentials. Advanced rootfinding techniques, such as companion matrix solvers, offer a solution. For many attractive-repulsive potentials, however, a companion matrix cannot be used directly, because there is no way to put the associated functions into a monomial basis form. A complementary technique is proxy rootfinding—by finding the best-fit polynomial approximant of a function, the zeros of the approximant can be guaranteed to be close to the zeros of the function. Using the Chebyshev basis and grid offers additional guarantees with regards to the quality of the approximation, the speed of convergence, and the avoidance of Runge’s phenomenon. By finding Chebyshev interpolants and using the Chebyshev-Frobenius companion matrix, the zeros of any real function on a bounded domain can be found. Here we show that using an Adaptive Chebyshev Proxy Rootfinder with Automatic Subdivision (ACPRAS) with appropriate scaling functions, numerical issues presented by attractive-repulsive potentials, including those of scale, can be handled. Using these techniques, we show that it is possible to include any physically reasonable interatomic potential in a BCA code, and to guarantee correctness of the resulting scattering angle calculations.

Materials Science↗
NASA NTRS1983

Finite-element methods for steady solidification problems

Four Galerkin finite-element methods are tested for solving the free-boundary problem that describes steady solidification. The formulations differ in the solution method used to account for the unknown shape of the melt/solid interface, in the interphase condition (either balance of heat flux or equilibrium of temperature) distinguished for locating the interface, and in the technique used for solving the systems of algebraic equations that result from the finite-element approximations. Methods that use the melting point isotherm to locate the melt/solid interface are found more accurate and efficient than formulations based on the interfacial energy balance. Solution by a Galerkin-Newton algorithm of the free-boundary problem transformed to a fixed domain is most efficient when the field problem in each phase is made nonlinear by including radiation from the melt and solid to the surroundings.

Ettouney, H. M.↗
NASA NTRS2008

X-Ray Timing Measurements of NGC 5408 X-1 With XMM-Newton and Swift/XRT: Implications for the Mass of a ULX

I present new X-ray timing measurements of the ULX NGC 5408 X-1 with XMM-Newton, and long term monitoring with the XRT onboard SWIFT. This object is one of only two ULXs in which quasi-periodic oscillations (QPO) have been detected. Recent observations with XMM-Newton confirm the presence of QPOs in this object. Most interestingly, two QPOs are again detected, as in an earlier observation, however, the QPO frequencies are different, now appearing at 10 and approximately 14 mHz. We discuss the implications of the QPO frequencies and spectra at these two different epochs for the mass of the black hole in NGC 5408 X-1. We also present strong evidence for long term flux variations based on the SWIFT monitoring campaign.

Strohmayer, Tod E.↗