SEARCH · Search NASA

Results for “asymmetric cells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Revealing the Anion–Solvent Interaction for Ultralow Temperature Lithium Metal Batteries

Anion solvation in electrolytes can largely change the electrochemical performance of the electrolytes, yet has been rarely investigated. Herein, three anions of bis(trifluoromethanesulfonyl)imide (TFSI), bis(fluorosulfonyl)imide (FSI), and derived asymmetric (fluorosulfonyl)(trifluoro-methanesulfonyl)imide (FTFSI) are systematically examined in a weakly Li + cation solvating solvent of bis(3-fluoropropyl)ether (BFPE). In-situ liquid secondary ion mass spectrometry demonstrates that FTFSI - and FSI - anions are associated with BFPE solvent, while weak TFSI - /BFPE cluster signals are detected. Molecular modeling further reveals that the anion–solvent interaction is accompanied by the formation of H-bonding-like interactions. Further, anion solvation enhances the Li + cation transfer number and reduces the organic component in solid electrolyte interphase, which enhances the Li plating/stripping Coulombic efficiency at a low temperature of -30 °C from 42.4% in TFSI-based electrolytes to 98.7% in 1.5 m LiFTFSI and 97.9% in LiFSI-BFPE electrolytes. The anion–solvent interactions, especially asymmetric anion solvation also accelerate the Li + desolvation kinetics. The 1.5 m LiFTFSI-BFPE electrolyte with strong anion–solvent interaction enables LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)||Li (20 µm) full cell with stable cyclability even under -40 °C, retaining over 92% of initial capacity (115 mAh g -1 , after 100 cycles). The anion–solvent interactions insights allow to rational design the electrolyte for lithium metal batteries and beyond to achieve high performance.

25 ENERGY STORAGE↗

NASA NTRS2005

Electronic Transport through Self Assembled Thiol Molecules: Effect of Monolayer Order, Dynamics and Temperature

We present the charge transport and tunneling conductance of self assembled organic thiol molecules and discuss the influence of order and dynamics in the monolayer on the transport behavior and the effect of temperature. Conjugated thiol molecular wires and organometals such as terpyridine metal complexes provide a new platform for molecular electronic devices and we study their self assembly on Au(111) substrates by the scanning tunneling microscope. Determining the organization of the molecule and the ability to control the nature of its interface with the substrate is important for reliable performance of the molecular electronic devices. By concurrent scanning tunneling microscopy and spectroscopy studies on SAMs formed from oligo (phenelyne ethynelyne) monolayers with and without molecular order, we show that packing and order determine the response of a self assembled monolayer (SAM) to competing interactions. Molecular resolution STM imaging in vacuum shows that the OPES adopt an imcommensurate SAM structure on Au(111) with a rectangular unit cell. Tunneling spectroscopic measurements were performed on the SAM as a function of junction resistance. STS results show that the I-Vs are non linear and asymmetric due to the inherent asymmetry in the molecular structure, with larger currents at negative sample biases. The asymmetry increases with increasing junction resistance due to the asymmetry in the coupling to the leads. This is brought out clearly in the differential conductance, which also shows a gap at the Fermi level. We also studied the effect of order and dynamics in the monolayer on the charge transport and found that competing forces between the electric field, intermolecular interactions, tip-molecule physisorption and substrate-molecule chemisorption impact the transport measurements and its reliability and that the presence of molecular order is very important for reproducible transport measurements. Thus while developing new electronic platforms based on molecules, it is important to have a good control of the molecule-substrate interface, for the devices to perform reliably. While such a control would minimize fluctuations and dynamics in the ensemble, the real challenge is to develop device architectures that are tolerant to fluctuations, since they cannot be totally eliminated in these low dimensional soft systems. Results of temperature dependent STS measurements will also be discussed.

Dholakia, Geetha↗

DOE OSTI2023

Zinc-finger BED domains drive the formation of the active Hermes transpososome by asymmetric DNA binding

The Hermes DNA transposon is a member of the eukaryotic hAT superfamily, and its transposase forms a ring-shaped tetramer of dimers. Our investigation, combining biochemical, crystallography and cryo-electron microscopy, and in-cell assays, shows that the full-length Hermes octamer extensively interacts with its transposon left-end through multiple BED domains of three Hermes protomers contributed by three dimers explaining the role of the unusual higher-order assembly. By contrast, the right-end is bound to no BED domains at all. Thus, this work supports a model in which Hermes multimerizes to gather enough BED domains to find its left-end among the abundant genomic DNA, facilitating the subsequent interaction with the right-end.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Li 2 GeS 3 : Lithium Ionic Conductor with an Unprecedented Structural Type

Lithium-ion batteries (LIBs) are widely used in electric vehicles, mobile electronic devices, and large-scale stationary energy storage systems. However, their liquid electrolytes present significant safety concerns due to their inherent flammability. To address this, the focus has shifted toward all-solid-state batteries (ASSBs) utilizing inorganic solid electrolytes that promise enhanced safety. In this work, we report the discovery of a new crystal structural type of Li-ion conductor, Li 2 GeS 3 , with a unique structure, synthesized by a solid-state reaction from Li 2 S and GeS 2 . It was first reported in 2000 with an orthorhombic unit cell, but its detailed crystal structure remains veiled. Here, we have unveiled its structure for the first time, employing an ab initio structure determination technique from powder X-ray and time-of-flight neutron diffraction data. The compound has an unprecedented crystal structural type with a hexagonal $P6_1$ symmetry and a unit cell of α = 6.79364(4) Å and c = 17.90724(14) Å. Its structure is comprised of a distorted hexagonal close-packed arrangement of sulfur anions with three asymmetric metal atoms: Li1, Li2, and Ge are in tetrahedral cavities surrounded by sulfur atoms. The ionic conductivity of Li 2 GeS 3 was measured to be 1.63 × 10 –8 S cm –1 at 303 K and 2.45 × 10 –7 S cm –1 at 383 K. Bond valence energy landscape calculations revealed three-dimensional lithium diffusion pathways within the structure. This novel crystal structure in Li 2 GeS 3 holds the potential for developing high-performance ionic conductors through suitable chemical substitution and offers valuable insights into designing new ionic conductors for ASSBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1993

The Crystal and Molecular Structure of an Asymmetric Diacetylene Monomer, 6-(2-methyl-4-nitroanilino)-2,4-hexadiyne-1-ol

The crystal and molecular structure of an asymmetric diacetylene monomer has been determined from x-ray diffraction data. The crystals, obtained from an acetone/pentane solution, are orthorhombic, Fdd2 with Z = 16 in a unit cell having dimensions of a = 42.815(6) A, b = 22.224(5) A, c = 4.996(l) A. The structure was solved by direct methods and refined by least- squares techniques to an R(sub F) of 6.4% for 988 reflections and 171 variables. The diacetylene chains are disposed in the unit cell in a complex manner in order to satisfy the hydrogen- bonding, crystal packing, and symmetry requirements of the system. The solid state polymerization mechanism is discussed with respect to the geometric disposition of the diacetylene chains. These chains are far apart and incorrectly oriented with respect to each other to permit polymerization in the crystal by means of 1,4-addition, consistent with the Baughman mechanistic model.

Vlasse, Marcus↗

NASA NTRSDate not supplied

Remodeling BioSentinel’s Microbial Metabolism Measurement System

BioSentinel, the first biological CubeSat beyond low Earth orbit, will investigate how Saccharomyces cerevisiae responds to ionizing radiation using optical measurements of a colorimetric metabolic indicator dye (alamarBlue). To map optical data to more detailed metabolic measurements, a microbial culture system for ground testing was designed consisting of a 400 mL beaker and a rubber stopper with pass-through holes for its five sensor probes (electrical conductivity, pH, oxidation-reduction potential, dissolved oxygen, optical density). The initial design had several drawbacks. It was only partially reusable due to its one-time sealants: Teflon tape and parafilm. A steady increase in oxygen levels within the sensor’s testingdata indicated the design was not sufficiently airtight. Degradation of the rubber stopper’s elasticity due to sterilization and reinsertion of the probes led to poor robustness and eventual replacement. The vessel’s large headspace didn’t reproduce flight conditions and a large culture volume required more reagents. The system has been redesigned to contain a rigid, biocompatible polycarbonate disc lid that allows for threaded inserts. The culture vessel’s height will be reduced from 110 mm to 65 mm to decrease overhead space and material costs. A more reliable seal will be achieved with a gasket and clamps. The optical probe records absorbance at four wavelengths to characterize cell density and alamarBlue dye ratios. A pneumatically operated plunger draws media through the hollow interior of the probe. Currently, deformation of the silicone on the plunger causes asymmetrical movement and a drift from its initial state. Designs are being developed to limit the plunger’s travel for a more accurate measurement cycle. The remodeled system is under construction and will be tested for leaks and accuracy. The measurements collected will be used to provide additional insight into the optical data returned from the BioSentinel mission.

Astrobiology↗

DOE OSTI2024

Nonvolatile memory cells from hafnium zirconium oxide ferroelectric tunnel junctions using Nb and NbN electrodes

Ferroelectric tunnel junctions (FTJs) utilizing hafnium zirconium oxide (HZO) have attracted interest as non-volatile memory for microelectronics due to ease of integration into back-end-of-line (BEOL) complementary metal oxide semiconductor fabrication. This work examines asymmetric electrode NbN/HZO/Nb devices with 7 nm thick HZO as FTJs in a memory structure, with an output resistance that can be controlled by read and write voltages. The individual FTJs are measured to have a tunneling electroresistance of 10 during the read state without significant filament conduction formation and reasonable ferroelectric performance. Endurance and remanent polarizations of up to 10 5 cycles and 20 μC/cm 2 , respectively, are measured and are shown to be dependent on the cycling voltage. Electrical measurements demonstrate how magnitude of the write pulse can modulate the high state resistance and the read pulse influences both resistance values as well as separation of resistance states. Then, by using two opposite switching FTJ devices in series, a programmable nonvolatile resistor divider is demonstrated. Measurements of these two FTJ unit memory cells show wide applicability to a BEOL microfabrication process for a re-readable, rewritable, and nonvolatile memory cell.

42 ENGINEERING↗

DOE OSTI2023

Impact of fluorination on Li + solvation and dynamics in ionic liquid-hydrofluoroether locally concentrated electrolytes

The thermal, physical, structural, and transport properties of ionic liquid (IL) electrolytes based on n-methyl-n-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide [PYR14][TFSI] and Li-salts of lithium (nonafluorobutane)(trifluoromethanesulfonyl)imide [Li][IM14] and [Li][TFSI] (0 ≤ x Li ≤ 0.3), with addition of 1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropyl ether (TTE) (0 ≤ x TTE ≤ 0.45) were studied. While [IM14] increases glass transition, TTE improves conductivity over a wider liquidus range. Li + is solvated primarily by [TFSI] with some contribution by [IM14]. However, both 7 Li- 19 F HOESY NMR and spatial distribution functions (SDFs) derived from molecular dynamics (MD) indicate short contacts between the fluorines of TTE and Li + . This is a result of tighter anion-solvated Li + without aggregation of the Li + solvates, consistent with Raman measurements, thus confirming the existence of fluorous domains in the bulk which leads to improved fluidity and a Li + diffusivity of 1.26 x 10 –12 m 2 /s at 0 °C (x Li = 0.20) with a Li + transference of 0.16. Improved transport properties translated to a higher capacity of the TTE/IL electrolyte in a Li||LiFePO 4 half-cell with 95mAh/g at 0.1C, compared to the IL electrolyte without TTE (60 mAh/g). Furthermore, this study demonstrates the tunability of solvation and transport properties in IL electrolytes by asymmetric fluorinated anions and hydrofluoroether co-solvents for low temperature Li-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2020

Phenothiazine–MXene Aqueous Asymmetric Pseudocapacitors

Not provided.

catalysis (heterogeneous)↗

DOE OSTI2024

Asymmetric oligomerization state and sequence patterning can tune multiphase condensate miscibility

Endogenous biomolecular condensates, composed of a multitude of proteins and RNAs, can organize into multiphasic structures with compositionally distinct phases. This multiphasic organization is generally understood to be critical for facilitating their proper biological function. However, the biophysical principles driving multiphase formation are not completely understood. Here we use in vivo condensate reconstitution experiments and coarse-grained molecular simulations to investigate how oligomerization and sequence interactions modulate multiphase organization in biomolecular condensates. We demonstrate that increasing the oligomerization state of an intrinsically disordered protein results in enhanced immiscibility and multiphase formation. Interestingly, we find that oligomerization tunes the miscibility of intrinsically disordered proteins in an asymmetric manner, with the effect being more pronounced when the intrinsically disordered protein, exhibiting stronger homotypic interactions, is oligomerized. Our findings suggest that oligomerization is a flexible biophysical mechanism that cells can exploit to tune the internal organization of biomolecular condensates and their associated biological functions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Asymmetric battery having a semi-solid cathode and high energy density anode

Embodiments described herein relate generally to devices, systems and methods of producing high energy density batteries having a semi-solid cathode that is thicker than the anode. An electrochemical cell can include a positive electrode current collector, a negative electrode current collector and an ion-permeable membrane disposed between the positive electrode current collector and the negative electrode current collector. The ion-permeable membrane is spaced a first distance from the positive electrode current collector and at least partially defines a positive electroactive zone. The ion-permeable membrane is spaced a second distance from the negative electrode current collector and at least partially defines a negative electroactive zone. The second distance is less than the first distance. A semi-solid cathode that includes a suspension of an active material and a conductive material in a non-aqueous liquid electrolyte is disposed in the positive electroactive zone, and an anode is disposed in the negative electroactive zone.

Tan, Takahiro↗

DOE OSTI2022

Asymmetric battery having a semi-solid cathode and high energy density anode

Tan, Taison↗

DOE OSTI2023

Cloning and expression vectors and systems

Vectors for cloning, maintaining and expressing a wide range of coding sequences in inducible T7 expression systems in Escherichia coli expression hosts are disclosed herein. Target genes that can be stably maintained and expressed include those that specify proteins that are highly toxic to the host cell. Different configurations of vectors and expression hosts provide different rates of transcription and translation of target genes and therefore different rates of accumulation of target proteins. Methods for cloning by asymmetric ligation and co-expression of more than one target protein in a single vector are also disclosed, as are variants of BL21(DE3) having lower basal transcription by T7 RNA polymerase.

Studier, F. William↗

NASA NTRS1997

High Performance Circularly Polarized Microstrip Antenna

A microstrip antenna for radiating circularly polarized electromagnetic waves comprising a cluster array of at least four microstrip radiator elements, each of which is provided with dual orthogonal coplanar feeds in phase quadrature relation achieved by connection to an asymmetric T-junction power divider impedance notched at resonance. The dual fed circularly polarized reference element is positioned with its axis at a 45 deg angle with respect to the unit cell axis. The other three dual fed elements in the unit cell are positioned and fed with a coplanar feed structure with sequential rotation and phasing to enhance the axial ratio and impedance matching performance over a wide bandwidth. The centers of the radiator elements are disposed at the corners of a square with each side of a length d in the range of 0.7 to 0.9 times the free space wavelength of the antenna radiation and the radiator elements reside in a square unit cell area of sides equal to 2d and thereby permit the array to be used as a phased array antenna for electronic scanning and is realizable in a high temperature superconducting thin film material for high efficiency.

Bondyopadhyay, Probir K.↗

DOE OSTI2022

Verifying the structure-property-performance relationship of Y6-based small molecule acceptors by alkoxy-side chain isomerization and conjugated skeleton asymmetry

Non-fullerene small molecule acceptors (NF-SMAs) such as Y6 derivatives were the current working horse for the top performing polymer solar cells (PSCs). For this reason, numerous chemical modifications have been explored for establishing structure–property-performance relationship for Y6-based NF-SMAs. In this work, we explored the isomerization on asymmetrical Y6 derivatives by varying the position of alkoxy side chain on the thiophene linkage between the core and one of the end groups of Y6. The isomers with differences in conformational restriction raised by noncovalent interactions as well as steric hindrance revealed distinctive behavior in crystallization and polymorphism, which led to a significant contrast in PSC performances. Here the X-TO1 molecule with alkoxy side chain facing the end group (outward) displayed preferred molecular configuration and polymorph, delivering power conversion efficiency (PCE) of 15.63%, while its isomer X-TO2 showed coexisted polymorphs significantly increased the charge recombination in the PSC devices led to a low PCE around 3%. This structure–property-performance relationship not only highlighted the elegancy of isomerization in tuning the photovoltaic performances but also identified polymorphism as one of the causes for impairing photovoltaic performances of PSCs.

36 MATERIALS SCIENCE↗

NASA NTRS1983

Pore size engineering applied to the design of separators for nickel-hydrogen cells and batteries

Pore size engineering in starved alkaline multiplate cells involves adopting techniques to widen the volume tolerance of individual cells. Separators with appropriate pore size distributions and wettability characteristics (capillary pressure considerations) to have wider volume tolerances and an ability to resist dimensional changes in the electrodes were designed. The separators studied for potential use in nickel-hydrogen cells consist of polymeric membranes as well as inorganic microporous mats. In addition to standard measurements, the resistance and distribution of electrolyte as a function of total cell electrolyte content were determined. New composite separators consisting of fibers, particles and/or binders deposited on Zircar cloth were developed in order to engineer the proper capillary pressure characteristics in the separator. These asymmetric separators were prepared from a variety of fibers, particles and binders.

Abbey, K. M.↗

NASA NTRS1983

Pore size engineering applied to the design of separators for nickel-hydrogen cells and batteries

Abbey, K. M.↗

DOE OSTI2024

High‐Performance Ternary Organic Solar Cells with Enhanced Luminescence Efficiency and Miscibility Enabled by Two Compatible Acceptors

Abstract The ternary strategy has proven to be an effective method for improving the efficiency of organic solar cells (OSCs). However, designing and selecting the third component still pose challenges. In this study, this issue is addressed by focusing on the PBDB‐T:Y18‐F binary system and introducing a new, strong luminescent, asymmetric small‐molecule acceptor (SMA) called L8‐CBIC‐Cl, which shares a similar skeleton with Y18‐F. The similarity in molecular framework facilitates good compatibility between the two acceptors, resulting in the formation of an alloy‐like acceptor phase. Furthermore, the norbornenyl‐modified end group in L8‐CBIC‐Cl contributes to its strong luminescent properties, which in turn leads to a low non‐radiative energy loss and a high open‐circuit voltage. Consequently, the PBDB‐T:L8‐CBIC‐Cl:Y18‐F based ternary devices realize a high power conversion efficiency (PCE) up to 17.01%, which is higher than PBDB‐T:Y18‐F device (14.49%). Importantly, L8‐CBIC‐Cl exhibits a good universality as a guest acceptor in other three binary systems (D18:Y6, D18:BTP‐eC9‐4F, and D18:L8‐BO). The D18:L8‐BO:L8‐CBIC‐Cl device shows an impressive efficiency of 19%. The work demonstrates that employing SMA with a high PLQY and better miscibility with host acceptor as the third component has a great potential for developing high‐efficiency ternary OSCs.

Chemistry↗