Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic layer etching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Self-Aligned Selective Area Front Contacts on Poly -Si/SiO x Passivating Contact c -Si Solar Cells

We report both polarity poly-Si/SiO x passivating contacts in a front/back device configuration may represent the next solar cell architecture after tunnel oxide passivating contacts (TOPCon) cells, but high parasitic absorption in the front poly -Si layer often limits its performance. This work explores a wet etching technique to remove the front poly -Si in the nonmetallized regions using self-aligned metal grids as an etch mask. We systematically examine various dielectric layers (SiN x ,Al 2 O 3 , and stacks thereof) to study the repassivation of the etched n + surface, and find that an SiN x /Al 2 O 3 passivation stack can effectively repassivate the etched surface, which we attribute to field-effect passivation from the positive fixed charge from the SiN x layer, and excellent chemical passivation property from Al 2 O 3 in the form of atomic H. We demonstrate a front/back poly-Si/SiO x passivating contact device, with an open-circuit voltage (V oc ) of 690 mV, short-circuit current density (J sc ) of 39.8 mA/cm 2 , fill factor of 78%, and power conversion efficiency of 21.4%. Furthermore, simulations using SunSolve and Quokka 3 show good agreement with both the optical and electrical properties of the experimental device. The power loss analysis reveals improvements in the optical loss from the back Ti adhesion and front SiN x layers would lead to a 23.5% device. Lastly, a techno-economic model compares the production cost of this improved cell with the current TOPCon cells. Our results highlight that further cost reductions in single-sided doped poly -Si layers are needed to compete with mainstream passivated emitter and rear cell, and TOPCon technologies.

14 SOLAR ENERGY↗

Interactions of chlorine plasmas with silicon chloride-coated reactor walls during and after silicon etching

The interplay between chlorine inductively coupled plasmas (ICP) and reactor walls coated with silicon etching products has been studied in situ by Auger electron spectroscopy and line-of-sight mass spectrometry using the spinning wall method. A bare silicon wafer mounted on a radio frequency powered electrode (-108 V dc self-bias) was etched in a 13.56 MHz, 400 W ICP. Etching products, along with some oxygen due to erosion of the discharge tube, deposit a Si-oxychloride layer on the plasma reactor walls, including the rotating substrate surface. Without Si-substrate bias, the layer that was previously deposited on the walls with Si-substrate bias reacts with Cl-atoms in the chlorine plasma, forming products that desorb, fragment in the plasma, stick on the spinning wall and sometimes react, and then desorb and are detected by the mass spectrometer. In addition to mass-to-charge (m/e) signals at 63, 98, 133, and 168, corresponding to SiCl{sub x} (x = 1 - 4), many Si-oxychloride fragments with m/e = 107, 177, 196, 212, 231, 247, 275, 291, 294, 307, 329, 345, 361, and 392 were also observed from what appear to be major products desorbing from the spinning wall. It is shown that the evolution of etching products is a complex 'recycling' process in which these species deposit and desorb from the walls many times, and repeatedly fragment in the plasma before being detected by the mass spectrometer. SiCl{sub 3} sticks on the walls and appears to desorb for at least milliseconds after exposure to the chlorine plasma. Notably absent are signals at m/e = 70 and 72, indicating little or no Langmuir-Hinshelwood recombination of Cl on this surface, in contrast to previous studies done in the absence of Si etching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trap Passivation in Indium-Based Quantum Dots through Surface Fluorination: Mechanism and Applications

Treatment of InP colloidal quantum dots (QDs) with hydrofluoric acid (HF) has been an effective method to improve their photoluminescence quantum yield (PLQY) without growing a shell. Previous work has shown that this can occur through the dissolution of the fluorinated phosphorus and subsequent passivation of indium on the reconstructed surface by excess ligands. In this article, we demonstrate that very significant luminescence enhancements occur at lower HF exposure though a different mechanism. At lower exposure to HF, the main role of the fluoride ions is to directly passivate the surface indium dangling bonds in the form of atomic ligands. The PLQY enhancement in this case is accompanied by red shifts of the emission and absorption peaks rather than blue shifts caused by etching as seen at higher exposures. Density functional theory shows that the surface fluorination is thermodynamically preferred and that the observed spectral characteristics might be due to greater exciton delocalization over the outermost surface layer of the InP QDs as well as alteration of the optical oscillator strength by the highly electronegative fluoride layer. Passivation of surface indium with fluorides can be applied to other indium-based QDs. PLQY of InAs QDs could also be increased by an order of magnitude via fluorination. We fabricated fluorinated InAs QD-based electrical devices exhibiting improved switching and higher mobility than those of 1,2-ethanedithiol cross-linked QD devices. The effective surface passivation eliminates persistent photoconductivity usually found in InAs QD-based solid films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unveiling the influence of selective-area-regrowth interfaces on local electronic properties of GaN p-n junctions for efficient power devices

Here, we report correlated nanoscale mapping of the structure, composition, and properties of regrown GaN p-n junctions to identify how etching and non-planar regrowth processes limit diode performance via the introduction of unintentional dopants and defect states. p-GaN was selectively regrown in n-GaN trenches with SiO 2 masks of variable mask-to-trench-width ratio. Dilute Al layers were periodically introduced during regrowth as markers of the growth interface. Correlated nanoscale mapping of doping, conductivity, and dopant complexes was achieved with atom probe tomography (APT), scanning spreading resistance microscopy (SSRM), and cathodoluminescence (CL) spectroscopy, respectively. The Al marker layers, detected by APT, enabled reconstruction of the faceted growth interface and correlation of the dopant concentration with position and time. The p-GaN growth rate is proportional to the mask-to-trench width ratio while the dopant incorporation rate is invariant. At trench edges, magnesium incorporation is suppressed, and oxygen incorporation enhanced, due to preferential incorporation on the semi-polar growth surface, leading to compensation and less abrupt p-n junctions; the SiO 2 mask is a source of oxygen. Residual etch damage below the regrowth interface induces n-type and p-type conductivity, creating leakage pathways. The non-uniform Mg incorporation is driven by crystal anisotropy and is thus inherent to non-planar regrowth, but can be mitigated by engineering the regrowth interface and process parameters. The unprecedented integration of spatially resolved mapping of dopants, impurities, conductivity, and carrier type is a powerful approach to discriminating distinct factors that limit the performance of regrown diodes, enabling the rational optimization of process and device design.

36 MATERIALS SCIENCE↗

Water Desalination Using Nanoporous Single-Layer Graphene with Tunable Pore Size

Graphene has great potential to serve as a separation membrane due to its unique properties such as chemical and mechanical stability, flexibility and most importantly its one-atom thickness. In this study, we demonstrate first experimental evidence of the use of single-layer porous graphene as a desalination membrane. Nanometer-sized pores are introduced into single layer graphene using a convenient oxygen plasma etching process that permits tuning of the pore size. The resulting porous graphene membrane exhibited high rejection of salt ions and rapid water transport, thus functioning as an efficient water desalination membrane. Salt rejection selectivity of nearly 100% and exceptionally high water fluxes exceeding 105 g m-2 s-1 at 40 C were measured using saturated water vapor as a driving force.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation and Ripening of Self-Assembled Multilayers from the Vapor-Phase Deposition of Dodecanethiol on Copper Oxide

Here, the vapor-phase reaction of dodecanethiol (DDT) with copper oxide surfaces and the molecular level composition and structure of the resulting films were examined. Atomic force microscopy, cross-sectional transmission electron microscopy, and electron energy loss/electron dispersive spectroscopy reveal that, instead of forming self-assembled monolayers, DDT etches CuO surfaces to create ~8 nm thick Cu-thiolate multilayers. These layers are composed of surprisingly well-ordered crystallites, oriented either parallel or perpendicular to the substrate surface. Pre-etching of the CuO to expose the underlaying copper metal is shown to prevent the formation of multilayers and instead allow for the formation of the expected monolayers. Water contact angle and Fourier transform infrared spectroscopy are further shown to be ineffective at distinguishing the multilayer and monolayer thiol films. Interestingly, the multilayer films are unstable in air, ripening into particles 20 μm wide and several hundred nanometers tall over the course of a week. Air exposure also leads to the slow oxidation of the sulfur and copper within the films at a rate similar to what has been seen before for DDT monolayers. As a result, the multilayers show no significant improvement over monolayers in the prevention of oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stacking sequence and interlayer coupling in few-layer graphene revealed by in situ imaging

In the transition from graphene to graphite, the addition of each individual graphene layer modifies the electronic structure and produces a different material with unique properties. Controlled growth of few-layer graphene is therefore of fundamental interest and will provide access to materials with engineered electronic structure. Here we combine isothermal growth and etching experiments with in situ scanning electron microscopy to reveal the stacking sequence and interlayer coupling strength in few-layer graphene. The observed layer-dependent etching rates reveal the relative strength of the graphene graphene and graphene substrate interaction and the resulting mode of adlayer growth. Scanning tunnelling microscopy and density functional theory calculations confirm a strong coupling between graphene edge atoms and platinum. Simulated etching confirms that etching can be viewed as reversed growth. This work demonstrates that real-time imaging under controlled atmosphere is a powerful method for designing synthesis protocols for sp2 carbon nanostructures in between graphene and graphite.

36 MATERIALS SCIENCE↗

Isolating GaSb membranes grown metamorphically on GaAs substrates using highly selective substrate removal etch processes

The etch rates of NH 4 OH:H 2 O 2 and C 6 H 8 O 7 :H 2 O 2 for GaAs and GaSb have been investigated to develop a selective etch for GaAs substrates and to isolate GaSb epilayers grown on GaAs. The NH 4 OH:H 2 O 2 solution has a greater etch rate differential for the GaSb/GaAs material system than C 6 H 8 O 7 :H 2 O 2 solution. The selectivity of NH 4 OH:H 2 O 2 for GaAs/GaSb under optimized etch conditions has been observed to be as high as 11471 ± 1691 whereas that of C 6 H 8 O 7 :H 2 O 2 has been measured up to 143 ± 2. The etch contrast has been verified by isolating 2 μm thick GaSb epi-layers that were grown on GaAs substrates. GaSb membranes were tested and characterized with high-resolution X-Ray diffraction (HR-XRD) and atomic force microscopy (AFM).

36 MATERIALS SCIENCE↗

High efficiency multilayer blazed gratings for EUV and soft X-rays: Recent developments

Multilayer coated blazed gratings with high groove density are the best candidates for use in high resolution EUV and soft x-ray spectroscopy. Theoretical analysis shows that such a grating can be potentially optimized for high dispersion and spectral resolution in a desired high diffraction order without significant loss of diffraction efficiency. In order to realize this potential, the grating fabrication process should provide a perfect triangular groove profile and an extremely smooth surface of the blazed facets. Here we report on recent progress achieved at the Advanced Light Source (ALS) in fabrication of high quality multilayer coated blazed gratings. The blazed gratings were fabricated using scanning beam interference lithography followed by wet anisotropic etching of silicon. A 200 nm period grating coated with a Mo/Si multilayer composed with 30 bi-layers demonstrated an absolute efficiency of 37.6percent in the 3rd diffraction order at 13.6 nm wavelength. The groove profile of the grating was thoroughly characterized with atomic force microscopy before and after the multilayer deposition. The obtained metrology data were used for simulation of the grating efficiency with the vector electromagnetic PCGrate-6.1 code. The simulations showed that smoothing of the grating profile during the multilayer deposition is the main reason for efficiency losses compared to the theoretical maximum. Investigation of the grating with cross-sectional transmission electron microscopy revealed a complex evolution of the groove profile in the course of the multilayer deposition. Impact of the shadowing and smoothing processes on growth of the multilayer on the surface of the sawtooth substrate is discussed.

43 PARTICLE ACCELERATORS↗

Modifications of Textured Silicon Surface Morphology and Its Effect on Poly-Si/SiO x Contact Passivation for Silicon Solar Cells

High-efficiency crystalline silicon (c -Si) solar cells require textured surfaces for efficient light trapping. However, passivation of a textured pyramidal surface to reduce carrier recombination is challenging due to the presence of sharp tips, edges, and valleys. Using electrical and surface microscopies combined with lifetime measurements, we report on the effect of HF:HNO3 etching on the pyramidal textured Si surface morphology, and on poly-Si/SiOx contact performance. Preferential rounding of either the valleys between pyramids, or the pyramid tips is obtained depending on the HF:HNO3 solution temperature. Both these morphologies make the pyramid shape irregular, with the pyramid faces no longer being predominantly a Si(111) surface. Our atomic force microscopy measurements further show that the nanoscale roughness over the pyramid face also reduces after HF:HNO3 etching. Thus, etching affects the microscopic pyramidal shape, the dominant crystallographic orientation, and the nanoscale roughness of the surface. We speculate that these three surface effects result in the improvement of surface passivation via poly-Si/SiOx contacts. However, this improved passivation is accompanied by increased reflectance of the HF:HNO3-etched textured surface. Finally, our electron-beam-induced current measurements reveal thickness nonuniformities in the thermally grown SiOx layer on the HF:HNO3-etched textured Si surface: SiO x is thicker near the pyramid tips, edges, and faces as compared with near the valleys between pyramids. This nonuniformity in the SiOx layer may explain the poorer passivation obtained on a KOH-textured and HF:HNO3-etched textured surface as compared with a planar surface.

14 SOLAR ENERGY↗

Selective Nanoscale Mass Transport across Atomically Thin Single Crystalline Graphene Membranes

Atomically thin single crystals, without grain boundaries and associated defect clusters, represent ideal systems to study and understand intrinsic defects in materials, but probing them collectively over large area remains nontrivial. In this study, the authors probe nanoscale mass transport across large-area (≈0.2 cm 2 ) single-crystalline graphene membranes. A novel, polymer-free picture frame assisted technique, coupled with a stress-inducing nickel layer is used to transfer single crystalline graphene grown on silicon carbide substrates to flexible polycarbonate track etched supports with well-defined cylindrical ≈200 nm pores. Diffusion-driven flow shows selective transport of ≈0.66 nm hydrated K + and Cl - ions over ≈1 nm sized small molecules, indicating the presence of selective sub-nanometer to nanometer sized defects. This work presents a framework to test the barrier properties and intrinsic quality of atomically thin materials at the sub-nanometer to nanometer scale over technologically relevant large areas, and suggests the potential use of intrinsic defects in atomically thin materials for molecular separations or desalting.

36 MATERIALS SCIENCE↗

Photoluminescence from GaAs nanodisks fabricated by using combination of neutral beam etching and atomic hydrogen-assisted molecular beam epitaxy regrowth

We have fabricated GaAs nanodisk (ND) structures by using a combination of neutral beam etching process and atomic hydrogen-assisted molecular beam epitaxy regrowth. We have observed clear photoluminescence (PL) emissions from GaAs NDs. The peak energy showed a blueshift due to the quantum confinement in three spatial dimensions, and it agreed with the theoretically estimated transition energy. The PL results also showed that the cap-layer disks act as radiative recombination centers. We have confirmed that the PL emission originates from the GaAs NDs, and our approach is effective for the fabrication of high quality ND structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realization of highly crystallographic three-dimensional nanosheets by a stress-induced oriented-diffusion method

Morphologically controlled nanostructures have been increasingly important because of their strongly shape dependent physical and chemical properties. Formation of nanoscale silicon based structures that employ high levels of strain, intentional, and unintentional twins or grain boundaries can be dramatically different from the commonly conceived bulk processes. We report, realization of highly crystallographic 3D nanosheets with unique morphology and ultra-thin thickness by a stress-induced oriented-diffusion method, based on plasma processing of metal layer deposited on Si substrate and its post deep reactive ion etching. Annealing in plasma ambient creates rod-like metal alloy precursors which induce stress at its interface with Si substrate due to the mismatch of lattice constants. This stress opens facilitated gateways for orientated-diffusion of metal atoms in 〈110〉 directions and leads to formation of NSs (nanosheets) with [111] crystalline essence. Nanosheets are mainly triangular, hexagonal, or pseudo hexagonal in shape and their thicknesses are well controlled from several to tens of nanometers. The structural and morphological evolution of features were investigated in detail using transmission electron microscope, atomic force microscope, scanning electron microscope and possible mechanism is proposed to explain the formation of the thermodynamically unfavorable morphology of nanosheets. Significant photoemission capability of NSs was also demonstrated by photoluminescence spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

In situ study of HfO{sub 2} atomic layer deposition on InP(100)

The interfacial chemistry of the native oxide and chemically treated InP samples during atomic layer deposition (ALD) HfO{sub 2} growth at 250 Degree-Sign C has been studied by in situ X-ray photoelectron spectroscopy. The In-oxide concentration is seen to gradually decrease on the native oxide and acid etched samples. No significant changes of the P-oxide concentrations are detected, while the P-oxides chemical states are seen to change gradually during the initial cycles of ALD on the native oxide and the chemically treated samples. (NH{sub 4}){sub 2}S treatment strongly decreases In-oxide and P-oxide concentrations prior to ALD and maintains low concentrations during the ALD process.

36 MATERIALS SCIENCE↗

Method of manufacture of atomically thin boron nitride

The present invention provides a method of fabricating at least one single layer hexagonal boron nitride (h-BN). In an exemplary embodiment, the method includes (1) suspending at least one multilayer boron nitride across a gap of a support structure and (2) performing a reactive ion etch upon the multilayer boron nitride to produce the single layer hexagonal boron nitride suspended across the gap of the support structure. The present invention also provides a method of fabricating single layer hexagonal boron nitride. In an exemplary embodiment, the method includes (1) providing multilayer boron nitride suspended across a gap of a support structure and (2) performing a reactive ion etch upon the multilayer boron nitride to produce the single layer hexagonal boron nitride suspended across the gap of the support structure.

36 MATERIALS SCIENCE↗

Optimization of graphene dry etching conditions via combined microscopic and spectroscopic analysis

Single-layer graphene structures and devices are commonly defined using reactive ion etching and plasma etching with O{sub 2} or Ar as the gaseous etchants. Although optical microscopy and Raman spectroscopy are widely used to determine the appropriate duration of dry etching, additional characterization with atomic force microscopy (AFM) reveals that residual graphene and/or etching byproducts persist beyond the point where the aforementioned methods suggest complete graphene etching. Recognizing that incomplete etching may have deleterious effects on devices and/or downstream processing, AFM characterization is used here to determine optimal etching conditions that eliminate graphene dry etching residues.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Transformation of 2D group-III selenides to ultra-thin nitrides: enabling epitaxy on amorphous substrates

Here, the experimental realization of two-dimensional (2D) gallium nitride (GaN) has enabled the exploration of 2D nitride materials beyond boron nitride. Here we demonstrate one possible pathway to realizing ultra-thin nitride layers through a two-step process involving the synthesis of naturally layered, group-III chalcogenides (GIIIC) and subsequent annealing in ammonia (ammonolysis) that leads to an atomic-exchange of the chalcogen and nitrogen species in the 2D-GIIICs. The effect of nitridation differs for gallium and indium selenide, where gallium selenide undergoes structural changes and eventual formation of ultra-thin GaN, while indium selenide layers are primarily etched rather than transformed by nitridation. Further investigation of the resulting GaN films indicates that ultra-thin GaN layers grown on silicon dioxide act as effective 'seed layers' for the growth of 3D GaN on amorphous substrates.

2D materials↗

Cerium Oxide Nanoclusters on Graphene/Ru(0001): Intercalation of Oxygen via Spillover

Cerium oxide is an important catalytic material known for its ability to store and release oxygen, and as such, it has been used in a range of applications, both as an active catalyst and as a catalyst support. Using scanning tunneling microscopy and Auger electron spectroscopy, we investigated oxygen interactions with CeOx nanoclusters on a complete graphene monolayer-covered Ru(0001) surface at elevated temperatures (600 – 725 K). Under oxidizing conditions (P_(O_2 ) = 1 × 10-7 Torr), oxygen intercalation under the graphene layer is observed. Time dependent studies demonstrate that the intercalation proceeds via spillover of oxygen from CeOx nanoclusters through the graphene (Gr) layer onto the Ru(0001) substrate and extends until the Gr layer is completely intercalated. Atomically resolved images further show that oxygen forms a p(2×1) structure underneath the Gr monolayer. Temperature dependent studies yield an apparent kinetic barrier for the intercalation of 1.26 eV. This value correlates well with the theoretically determined value for the reduction of small CeO2 clusters reported previously. At higher temperatures, the intercalation is followed by a slower etching of the intercalated graphene (apparent barrier of 1.64 eV). Vacuum annealing of the intercalated Gr leads to the formation of carbon monoxide, causing etching of the graphene film, demonstrating that the spillover of oxygen is not reversible. In agreement with previous studies, no intercalation is observed on a complete graphene monolayer without CeOx clusters, even in the presence of a large number of point defects. These studies demonstrate that the easily reducible CeOx clusters act as intercalation gateways capable of efficiently delivering oxygen underneath the graphene layer.

Environmental Molecular Sciences Laboratory↗